U2312HM monitor is not recognized by my computer, when you use the USB cable

Similar Questions

• HP Officejet 8500 A909g is not recognized by my computer when plugged into the usb port

  I received an email from HP recommend I install new software for my Officejet Pro 8500.  I downloaded the software and installed.  The printer was working, but it would not scan. I got an error message telling me to re install the software because the analysis part has not been installed. I have downlaoded software again and installed it. During installation, the mode had to unplug the printer, so I did. (It is connected using the usb cable directly to the back of the computer).  When installation instructions came at a certain time, it told me to plug the printer. I did, but it was not recognized.  I checked the box to install all the software and install the printer later.  Now is back, and the printer is still not recognized by the computer.  Help, please.

  Hi Steve_finch,

  What operating system you have installed on the computer?

  Have you tried a new USB cable or a USB port on the computer?

• To DEVELOP the image don't copy not from before to after when you use the buttons in the taskbar below.

  In Lightroom, DEVELOP the image does not copy from before to after after using the buttons below.

  Is it possible LR shows before and after the same?

  By clicking on a button with >< can="" make="" them="" the="">

  

  You can reset the State 'Before' of a picture by right-clicking on a stage in the history panel.

  

  Press the [\] to also get a 'before '.

• PowerShot SX50HS will not photos import to CameraWindow DC. Using the USB cable, have windows 8.1.

  I use a Powershot SX50HS. I have already download my photos through CameraWindow DC without any problem. Recently, I tried to transfer pictures through CameraWindowDC and it fails to import whenever I have it try. It will not import any function I choose. I use Windows 8.1 and were at Canon to download updates recently to try to fix the problem. Nothing seems to work. Any ideas?

  Hello Bibbee2,

  For AutoPlay to work whenever you would instead of the window of the camera DC, must have Autoplay selected as the action that occurs when this device is connected.  This is done via the Control Panel, Autoplay.  Where you can tell the computer what you want to do when its connected.

• Can not get tabs to open when you use the t control or right click of the mouse or from the file drop-down

  OK, so the problem is not able to open new tabs, that I can't open new tabs by using the file drop-down and select it, I can't use Ctrl t, I can't use the button "+" at the end of the tab, and I can't get the right click and select new tab to work. However I can get new tabs by accessing a link on a page right click and selecting Open link in a new tab

  Try to disable or uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar, following a security update in Firefox 3.6.13

• When you connect the USB cable on a HP Officejet 4500 desktop computer?

  OK, you will understand that I am technically challenged. I look around the back of this thing and not been able to find a usb port. It takes a different usb port. This diagram in the manual is very cute, it does not show what is what. Some of us don't know a * beep * thing about computers but can follow the detailed instructions.

  Is it possible that you can show what looks like this single cable or just go to the radio Shack, I hate this place.

  You must have a printer like this USB cable.

  http://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_2?s=electronics&ie=UTF8&QID=1458693691&SR=1-2&keywords=printer+USB+cable

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560

  What it does:

  When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate

  Before the problem:

  Display mode switch Acer existed prior to the upgrades of the drivers

  The problem:

  The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?

  Additon Information needed to solve the problem or any other information:

  I would like to know what driver or software operates the Acer toggle display Mode?

  Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?

  Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:

  

  Thank you very much Ironfly Ace, it has worked Acer hero of the day

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• When you use the Clone Stamp tool CS6 the alt key does not work?

  Just recently, my mouse have misbehaved and touched my CS6 when I was working on a photo. The result, my alt key does not work. For example, when I use the Clone Stamp tool, I can't sample as the alt key does not work. Even in ACR, the alt key does not work. When I drag the 'white' to the left while pressing the ALT key, the screen turns black.

  Help, please? Thank you

  Steven Teo

  Hi Steven Teo,

  You are able to use the ALT key well otherwise on your computer?

  You can try to reset the Clone Stamp tool.

  To reset, follow the instructions below:

  1. Select the Clone Stamp tool

  2. right click / Control click dropdown at the top left

  3. choose Reset tool

  

  Hope that helps.

  Kind regards

  Assani

• SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  I can open the SG of start menu/desktop computer and I can open the PP project in SG very well. The PP project contains 3 deadlines and I take one I want without any problem. Returning to the SG PP works fine as well. It seems only thing doesn't work does not automatically open the PP file and selecting the correct timeline in the Official Journal of the project.

  I had a glance at the "C:\Users\john Bishop images\AppData\Roaming\Adobe\SpeedGrade\8.0\logs\SpeedGrade.log ' but it is not updated when I try to use the link Direct from PP. command It updated when I invoke the start menu/desktop computer SG. Note that none of the other newspaper, the files are updated either (Plugin Loading.log, Database.txt Trace and Debug Database.txt). All these get updated when I run the desktop/start. It would appear that SG is not yet known.

  I uninstalled the SG and the PP and re-installed (all in the directories by default) and everything seemed to go OK but no change.

  I also added 2 political profile the NVIDIA Control Panel, just display a message when loading SpeedGrade.exe and another for a slightly different message when loading SpeedGradeCmd.exe. SG invoking the desktop/start causes the SpeedGrade.exe message to display. Using the 'Direct link' PP file option does not display anything, reinforcing my thought that SG is just never called from PP.

  SP1 Windows 7 Professional 64 bit

  12 GB OF RAM

  2-Intel Xeon E5640 (16 sons) processors

  NVIDIA GeForce GTX580 1536 MB memory graphics

  PS... I used the Adobe cleaning tool noted elsewhere and tried NVIDIA workarounds as well - all to nothing does not.

  Problem solved!

  My Antivirus software was in the way. Once I have updated, things work fine.

  Thanks for your help!

• I can't use the link 'Check the seats' on Delta when I use Firefox, but Safari works fine. I get the message "not available at this time" when you use Firefox, but when I go on Safari it works just fine.

  I can't use the link 'Check the seats' on the website of Delta Airlines when I use Firefox, but Safari works fine. I get the message "not available at this time" when you use Firefox, but when I go on Safari it works just fine. I love Firefox but it sucks!

  This problem may be caused by corrupted cookies.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".
  • http://KB.mozillazine.org/cookies

• WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  WHEN YOU USE THE CONSTRUCTOR OF MY SITE, I CAN'T COPY AND PASTE WROTE THE BROWSER SECURITY SETTINGS HOW TO NOT CHANGE THESE FOR ME TO COPY / PASTE?

  https://support.Mozilla.com/en-us/KB/granting+JavaScript+access+to+the+Clipboard

  This extension will help you implement the security policies for access to the Clipboard.
  
  Allow the extended Clipboard support:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/852

• When you use the metro apps the computer displays a black background instead of a text being illegible white

  When you use the metro apps the computer displays a black background instead of a text being illegible white

  So basically I can't use the metro beyond the home screen interface
  Know of a solution:
  Using
  i7 processor
  640 m GPU NVIDIA
  6 GB memory
  It could be a driver problem or there at - it an option to change

  You have FXAA enabled in the NVidia Control Panel? That was the problem for me.
  Otherwise, just click on restore in Control Panel and it should fix the problem.

• Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent."  The edges of the selection will be not visible. ?

  See here:

  WARNING: no pixel is selected more than 50%