U2412M - all white becomes bright yellow

Just bought a new monitor and am having a strange problem. When I attach my computer monitor (IBM laptop computer T61p, Intel 965 chip graphics card, VGA hook up with the cable supplied with the new monitor) and boot, what would normally be white becomes bright yellow. (Is not like the yellow tint problem, some people have, it's pure, saturated yellow.) Sometimes even the text of the MESSAGE, so it can not because of the OS. (OpenSuSE 13.1). Yet, if I connect the VGA cable to my old monitor (Dell 2001FP) and start and then exchange the work cable to the new, I get white normal and just need to use xrandr to reset the display. So it can't really be a failure to monitor, can it? (And shows the monitor self test all colors properly, as do the messages and messages on the screen. I'm at a loss as to what could be the cause. I really like the monitor when the colors are good, but I won't be swapping cables whenever I start. Any suggestions?

What happens if you test the old on the new U2412M 2001FP VGA cable?

Tags: Dell Peripherals

Similar Questions

  • Satellite L300-PSLB8E - screen becomes all white and the laptop freezes

    Hello

    I have a Toshiba Satellite L300 PSLB8E. I initially bought with Windows Vista already installed on it. After a few years, I changed the operating system Windows 7 Ultimate. I installed the display and all the other necessary drivers (that is, sound, network, etc.).

    After I installed Windows 7, when I use the laptop for a while, the screen becomes all white and the laptop hangs. This happens spontaneously. Sometimes, in less than 10 minutes and other times that it can work perfectly for hours. I checked for loose batteries and other components, but everything seems fine.

    Physical damage only that there is a tiny crack on the screen in the bottom right of the screen. The operating system is not good? If I put windows Vista back as it was?

    Please advise and help understand me what the problem is with the laptop.

    Until we start discussion can you tell me what you do when this happen?
    Hard stop and restart?
    Is everything OK again when you do?

    It is not easy to say what exactly is the problem, but I put t think there is problem with OS and preinstalled display driver. A long time ago I installed Win7 Home Premium on friends L300 and it works perfectly.

    What you can try is to use the external monitor for a while and see if everything works well. If so, there is no problem with the operating system, drivers or graphics card. It may be that the display problem.

  • Why have all my colors suddenly changed - from white to cream yellow and all the other colors in the same way?

    Why have all my colors suddenly changed - from white to cream yellow and all the other colors in the same way?

    This looks strangely like the good old 'false monitor via Windows Update profile'. If the selector of color shows the cream when it should be white, that's all.

    We won't know until the OP comes back with more information and perhaps a screenshot, but in the meantime (since I'm away from my main system) I can try to locate my standard screenshot of one of the countless other threads I posted it that...

    ah, it's here (last posted barely two weeks in Lightroom):

  • Safari does not remember previous page n gets all white.

    Safari does not remember previous page n gets all white. For example, if I visit Facebook and you want to brush on the mouse on the previous page, I come to my homepage (google). Can click on a photo in Facebook, then click down, cause the page is all white after that. This happens in many sites like Ebay, etc. I've been looking for others this problem now, but cannot find someone with the same problem. So what to do?

    Go step by step and test.

    1 empty Caches

    Safari > Preferences > advanced

    Tick the box "Show develop menu in menu bar."

    Develop menu will appear in the Safari menu bar.

    Click on develop and select 'Empty cache' in the menu dropdown.

    2 Delete Cookies

    Safari > Preferences > privacy > Cookies and other data from the website:

    Click on the button "Details".

    Delete all cookies except those from Apple, your internet service provider and the banks.

    3 Disable Extensions and test them.

    Safari > Preferences > Extensions

    Uncheck 'Enable the Extension' and test.

    Enable the Extensions one by one and test.

    To uninstall any extension, select it and click the "Uninstall" button

    4. launch Safari, hold down the SHIFT key.

  • Blank pages occur if I try to print e-mail messages. Virus 'All white' cause?

    Printing other stuff also gives incomplete pages. I have Verizon Internet Security and other protection tools, but they seem powerless. I read that 'All white' has been victimizing more people. How can I permanently delete? Some security scans are not even see.

    Hello

    · What mail client or webmail you are using to print?

    · You use internet explore? If Yes, what is the version of the same thing?

    · What is the result when you preview the email before printing?

    · What is the number and model of the printer?

    · Were there any changes made on the computer?

    You can follow the step listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  • the digitised photographs of bright yellow print with background.__dont know what to delete or modify or delete color management profiles. __

    yellow background print on all digital photos.  Help.  images do not print true colors.  all the shades of yellow.

    yellow background print on all digital photos.  Help.  images do not print true colors.  all the shades of yellow.

    ====================================
    Have you seen the following items:

    (939395) when you view an image in Windows
    Photo Gallery on a Windows Vista-based computer,
    the picture is yellow
    http://support.Microsoft.com/kb/939395/en-us

    Microsoft PhotoBlog of frequently asked Questions:
    http://blogs.msdn.com/PIX/pages/FAQ.aspx#Q6
    Read: "q: why my pictures have a weird color.
    Enter the Photo Gallery (but look good in XP
    Photo and Fax and IE Viewer)? "The experience of John Inzer - MS - MVP - digital media

  • All colors but black yellow print

    I'm printing to a QuadCore intel mac running 10.6.8 an HP2600n from a few days ago, each doc print from my mac for this printer that has all colors other than yellow what looks black. It happens with all programs and MS Word documents, Preview & Acrobat. They look fine on the screen, but don't not when printing. If I send a doc to my colleague, it can print from their computer very well.

    I installed the drivers for the printer, but it did not help. Any suggestions?

    Thank you!

    Ok

    what you can try is to remove the old driver software print and then replace HP driver by using the Apple software updates.

    Open preferences system, print, and fax - and command, then click the name of the printer queue.  System should ask if you want to reset the printing system.  I do not know if you have any other connected printers, but be aware that if you say yes, it will remove all your queues from the printer and the driver files.

    If you deleted files (reset) the printer driver, then you can "Add printer" and the system should prompt you to download driver from Apple

    the process above it seems you reasonable?

  • my screen turns all white with shades of DIF... Black, white, orange, smtimes purpl etc... with a shrill of a noise of annoying gurgling?

    Since last week, my laptop screen shows all the colors in its truest form ;-) in fact after work for a few minutes... the screen unexpectedly goes all white, sometimes black, purple, orange and all the colors we could recall with a shrill of an annoying buzzzzz.

    I have no idea on the reason of this wild behavior from my laptop and so I ask aloud the front to get fixed up.mention the reason and repair?

    Hello

    Maybe the hardware failure, however it could be linked as well video card driver.

    Make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already tried the latest version, but also the many versions previous possible, you can try a beta driver if they are available.

    Kind regards

    Patrick

  • BlackBerry smartphones HELP! Curve 8520 screen is all white

    Hello world... I'm new to all this.  I had my BB for 8 months.  I really not something special for my phone except turn it on and hide in my 14 months old.  When I got it, the screen is all white.  I can't do anything with it.  I am able to receive calls on this topic, and I hear that I get messages on this subject, but I can't see anything! I can't do anything, not even to turn it off... I'm desperate!  I tried the soft start and even a difficult start, but even once, nothing works.  I hope someone here has an idea what to do... Thanks for your help and your support!

    My friend had a problem like this, the only thing it takes to send it for repair, according to me, contact the store where you brought the phone. Please click on the laurels on the side thanks. -->

  • the icons are all white at the start

    the icons are all white at the start of my PC. gradually in time 30 seconds they are all back to normal. can someone tell me what the problem is and can be fixed.

    Please and thank you

    E-mail address is removed from the privacy *.

    Hello

    Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems on Startup icons. Please correct me if I misunderstood.

    I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    1. have there been recent changes to the computer before the show?

    I suggest to try the given steps and check if it helps.

    Method 1: Try to run fix it from the link below:

    http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

    Method 2: If the problem persists, then try to set up your computer in a clean boot state, and check to see if the same problem happens.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

     

    Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

    Method 3:

    Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Please follow these recommended steps and post if you still experience the problem.

  • Color calibration - not able to change to a bright yellow yellow

    Separated from this thread.

    I use Windows 8.1 on a gaming laptop Lenovo.

    The yellow color is has a horrible greenish.  I went through the color calibration, but I wasn't able to change a bright yellow yolks.  Can someone help me?

    Hello

    Thanks for posting in the Microsoft Community.

    This might have caused due to display drivers corrupted sometimes when screen updates the latest drivers, you may experience these symptoms or customizing the desktop software could also create this problem

    1. did you do with the last changes made to the computer before this problem?

    I suggest you try the following steps.

    a. press the Windows key + R.
    b. type ""Control " and press OK."
    c. click on color management.
    d. click Advanced.
    f. click on Calibrate.
    g. click Next to continue.

    Additional information:

    Please visit the manufacturer of computer for the latest updates display drivers.

    Also, try the procedure described in the following Microsoft Help article.

    http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

    We look forward to you a response. Please do not hesitate to contact us if you have other questions related to Windows.

  • I downloaded the creative cloud adobe but when I open it, the screen is all white.

    I tried to download photoshop and fireworks, but when I opened the desktop screen is all white and white.

    If you are behind a firewall corp, Creative Suite Enterprise Deployment. Adobe Developer Connection

    Otherwise, rename the Opm.Db file in

    Windows: "Users\ {username} \AppData\Local\Adobe\OOBE directory.

    "" Mac: "~/Library/Application Support/Adobe/OOBE"

  • When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

    When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

    This happens even with pictures taken on another device, not just mine.  My daughter told me that the phone fell recently.  The yellow streak isn't nowhere elsewhere on the laptop, right on the photos in LR.

    It happens when you import new images. This pourrait indicate that the sector where the pictures are copied to is damaged. But it could be a faulty card reader or a bad cable if you connect the camera directly to the computer. It's a hardware problem. Your challenge is to figure out where this problem.

  • Overview of the animation Flash is all white

    I use Flash CC on a windows computer. My document is a HTML5 canvas. I have my all finished animation, except for the button action. I tested the animation before you add Actions and that it appears in the browser fine (I used both Chrome and IE). But when I add in the Actions of the button to go to another web page and test it, the animation turns all white. I used the code snippet "Click to go to Web Page", while the button is selected.

    I looked at several different sites and books and looks like I'm doing everything right. But my test shows just a white box.

    In the output is the following:

    WARNINGS:

    Supported text is limited. It is generally recommended to include the text as HTML (see DOMElement) elements. (6)

    In EaselJS frame numbers start at 0 instead of 1. For example, this STOP button and gotoAndPlay calls. (2)

    Happy with the two Bitmaps and buttons can generate errors of local security in some browsers to run from the local file system.

    The motion tweens are published in the form of animations frame by frame. Use Classic tweens where possible. (15)

    I thought about it! I used the code snippet in the ActionScript, not HTML5 file folder. When I went there it works fine!

  • When I pick up my brush tool and try to get a soft brush on the menu drop-down they look all white people, I

    When I pick up my brush tool and try to get a soft brush in the dropdown menu drop-down they look all white people, I don't see a soft brush of a soft brush No. How can I fix it in photoshop? Thank you

    Hi tvilela,

    Do you, by chance, the pencil selected instead of the Brush tool.

    -Christmas

Maybe you are looking for