U2412M, error DDM, not supported

Similar Questions

• How can I fix error 'SIM not supported "?

  I have AT & T and have an iPhone 6. A couple of days, I bought a refurbished AT & T iPhone 6 s. I put the SIM card in the iPhone again and it says "SIM not supported." So I called AT & T and he scored, but it still doesn't work. I'm going to AT & T to try to get a SIM different but thought I would post here first since it's a few hours before they open and thought that maybe there was another way to fix it. They are both 'locked' phones, but I think that it would not matter since they are both locked to AT & T

  What is you get the exact error message?

  Are you sure it's an iPhone AT & T?

  The ism unsupported error appears usually when you try to use a sim card which is not by the carrier, that the iPhone is locked.

• Format of paper detected error is not supported on 3210 all-in-One Printer

  Msg of error about the size of the paper when opening lid to print a paper copy, an office document that is on 81/2 x 11.  Error says 'paper size is not supported has detected", gushes out a blank page and cancels.  I went to default settings on a Word document that is located on my desktop and the page is set up correctly to print.  Don't know where else to see if the default values have been dirtied with.  Help, please.

  All, I went to Google again to continue my search for an answer.  Found the following of "Red Sonja":

  When I saw that so many other people on other forums of media also received this error message, I thought that it would be a solution posted by someone before too long. Assume that nobody could understand it!

  The problem has continued and became extremely irritating I went and spent a few hours on the support site of HPs and finally understood what to do, although I never found the exact error that we all received.

  Basically the fix is change the paper size setting in the Menu auto copy letter. This by pressing the copy, then #6, select letter (which is #2), and which will bring you to the Menu copy. Scroll through all the selections from 10 until you go to the bottom that is set by default again and select this option.

  I tried to make several copies, and it has worked every time now... no error message in view! However, if you try to make copies on paper other than the standard 8.5 x 11, you can select that with each individual work because by default no longer detection "auto."

  Thank you Red Sonja, whoever you are!

  RNA

• WMP 11 will not play my dvd downloads digital message error c00d2906 not support level of mandatory protection to decompress the digital file

  Original title: wmp 11 will not play my dvd digital downloads

  iGet an error message c00d2906 is not supported level of protection required to decompress digital file is there a fix for this problem

  Hi alfredDAVILA,

  ·         What is the format of the file?

  Follow the steps in the article.

  You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11

  http://support.Microsoft.com/kb/926373

  For reference:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions (Applicable to windows XP)

  Windows Media Player 11 cannot read content protected by DRM on Windows Vista

  http://support.Microsoft.com/kb/935336 (Applicable to windows XP)

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5268&ID=C00D11B1&ContextId=66&OriginalID=C00D2906

• Update ESXi3.5U3 to ESXi4 by vSphere update Utility error: host not supported - unhandled setting in startup disk page

  When I try to upgrade my ESXi3.5 Server (which is Xeon E5310 on ASUS DSBV/SAS box with 5 SATA drive on the SAS controller unRAID) to ESXi4

  I got error: unsupported Host - not support layout of startup disk

  What can I do now? Is this bug or just, do not boot from the local disk support?

  Since the fdisk-l to output provided, its clear that the 2nd partition is missing. The 2nd parition in ESXi Installable is the partition scratch (FAT16 file system), which is by default to 4 GB. During the upgrade the parition is resized to scrape (about 150 MB of space is used 4 GB) to extend the bootbanks of 49 MB to 256 MB.

  I don't know the exact reason why the partition scratch missing here since it is generally created during the default installation. One possibility could be that there was a parition scratch already available on a secondary drive during installation and setup it has not created on the primary drive.

  A standard partition for ESXi 3.5 with partition table scratch would look something like the following...

  Disk/dev/disk / vmhba1:0:0:0: 8589 MB, 8589934592 bytes

  Heads of 64, 32 sectors/track, 8192 bottles

  Units = cylinders of 2048 * 512 = 1048576 bytes

  Device boot start end blocks Id system

  / dev/discs / 5 750 763904 5 Extended vmhba1:0:0:1

  / dev/discs / 751 4845 4193280 6 FAT16 vmhba1:0:0:2 < -.

• Bit Trip Beat game error: input not supported

  Original title: input not supported

  What came was a floating message saying "input not supported", then so about 2 hours ago I double clicked on the game "Bit Trip Beat." so I thought well ill just alt tab and change the resolution and others, but I could not alt tab... I could hear my msn flashes... I could hear trip beat bit sounds in the game, everything except the screen worked...

  so I restarted my comp in safe mode with network connections so I could google a few answers but nothing helped me to this day...
  things I've tried are, restart in safe mode, and then change the resolution to something, I know that it can handle (did not work)... by clicking on "last known good configuration" (did not work)... ive tried rebooting with command prompt and typing a few commands that I found from google that is supposed to restore the resolution that doesn't work anymore , I also chose another option in windows boot manager "enable video low resolution (640 x 480), which also did not work."
  Ive kept googling and nothing seems to work, I'm running a windows OS vista and I'm not sure of my monitor acer... model someone at - he a clue whats up?
  What, in my view, that has happened, is that the game Bit Trip Beat made the default resolution of my something computers it can not handle... that is what happened?... because when I started, I had to force shutdown my computer and restart from there. any help would be appreciated

  Hello

   
  I suggest you to try Method 2 from the previous post and adjust graphics hardware acceleration. If it does not resolve the problem, then try to uninstall the graphics drivers and reinstall it.
  Let us know if it helps.

• Error does not support 64-bit Windows, Explorer of Titanic on Win 7 64 bit installation

  Original title: Titanic Explorer on Win 7 64 bit Running

  Hello, I just got an application called James Cameron's Titanic Explorer, it's cool, but I have a problem installing it.

  When I try to install it, it says it does not support 64-bit Windows. I am running Windows 7 Home Premium x 64 bit.

  Is there a way I could run in 64-bit Windows? Thanks for help

  EDIT: I tried compatibility mode, no luck.

  According to the program, it does not work on a 64-bit so make OS run natively is very likely.

  If you have another Windows license, you can still use Windows Virtual PC to run virtually, but keep in mind any visualization program has limited graphics ability and it may not always work well or very quickly.

• Factory unlocked iphone 6s gives error sim not supported

  Hey guys

  I recently bought a new iphone unlocked factory 6 sec New York, and he has not used in the States. Now I'm back in my country Pakistan, and it does not recognize the sim card I inserted even if it supports an iphone officially. It gives the same error as below as in the phone itself. Care of apple, I called and they said to restore and update hard resetting, which, after hitting a few tests, does not always work.

  would be really grateful for the help

  Thank you

  

  If restore you like new - then you should see this image-

  If you do not see this image - the phone is not unlocked - contact Apple Care and ask them to check what operator it is locked for

  How to unlock your iPhone for use with another carrier - Apple Support

• Computer error is not supported when you download the Fix It for Windows XP Professional tool

  Hello

  I write a question on behalf of a client. The client tries to download the Fix It tool: http://support.microsoft.com/mats/hardware_device_problems/

  for its hardware problem Windows XP when it has encountered an error that the store does not apply to its system. According to the error current configuration of the computer system is not compatible. Windows XP was purchased from Dell.

  The reason that the client downloaded the tool is because it can not use the TV as a monitor because exclamation point in device for VGA Manager.

  Please help solve us this problem. Thank you.

  Hello

  1. What is the full error message received when installing the tool on the computer fixit?
  2. The problem persists during the installation of any other tool fixit?
  3. Did you the latest changes on the computer?

  For the exclamation mark next to VGA device is the Device Manager I would suggest that you manually download and install the latest driver for graphics card on the computer by visiting the card manufacturer's Web site and see if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Why I get a loading error when not supported and wear my watch?

  I wonder why I get this error when you wear my watch, it appears like 5 or 6 times a day

  Hello

  It can help to boost your watch:

  -To turn off: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To reactivate: press and hold the side button until you see the Apple logo.

  If the problem persists, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:

  https://www.Apple.com/support/watch/contact/

• Error format not supported.

  Cannot import. In first MFX files.  Converted to MP4 with Media Encoder and they still won't matter.

  With phone support, we discovered that it was missing an association with Quicktime.  Uninstalled and reinstalled.  Now works.  Thanks for your help.

• Resolve error: series 1200 Protocol not supported network home

  1 Laserjet 1200 HP

  2. Windows 8 64-bit

  3 Error Message: PCL XL error

  Subsystem - kernel

  Error - Protocol not supported

  Operator - 0x0

  Position - 0

  4. no changes to the network printer

  Have already installed a printing device to a laptop connected to a shared printer on the desktop computer.  Installed the HP Universal printing PCL 6 (v 5.6.0). Also have a printer all-in-one wireless inkjet that works successfully from the laptop.

  He worked successfully for about a month. Then suddenly would not print, but has continued to communicate with the printer via the office. Wireless printing still works fine.

  Print path

  Laptop to router to desktop for printer 1200

  Configuration of the laptop Port

  Port: \\DesktopName\hplaserj

  Port Description: Local

  Printer: HP Universal PCL 6 (v 5.6.0)

  To date:

  1. have you deleted device printing PCL 6 of the laptop, reinstalled.

  2. the footsteps of PCL 6 removed from the register; re-installed the printing device, deleted the old port and created a new port.

  3. just did print no, same error message.

  4 repeat step 2, but installed the universal HP PCL 6 driver. Same result and same error message.

  Can anyone suggest something else to try or point me in the right direction?

  Basically, Shlomi has proposed a solution that worked. Thank you.

  That's what I actually did.

  For Windows 7 and 8, HP has apparently developed universal print (UPD) for the old PCL 6 and PCL 5 drivers. Had already downloaded the 64 bit version of the UPD PCL 6. 64 bit versions re-downloaded and re-installed UPD PC5 and PCL 6. It wasn't the problem.

  Then I followed the suggestion to connect directly to the printer 1200 via the USB cable.

  1 first removed from the registry, references to PCL 6 and PCL 5 printers

  2. then restarted the print spooler (computer-> manage-> services)

  3. Add a printer in devices and printers, this time using the DOT4 port.

  4 bingo, could print a test page.

  5. from print properties, change the local port to \\computer name\hplaserj, the shared printer on the wireless network.

  7 bingo again. Has been able to print a test page and were able to print additional documents.

  Still don't understand what the problem was or what caused it suddenly appear, but it works now.

• Msg says error browser does not support HTML5 video. My FF and Flash to date. Now what?

  To access the cam on the site Web of Cornell bird's nest. Plays fine on PC. For my Samsung phone error says "== browser does not support html5" FF for Android and Flash for Android updated, rebooted the phone and got the same error message. The parameters defined for tap to play. Help

  It seems that YouTube provides no content in h264 or webm for this video. https://www.YouTube.com/embed/Q4iKJIiYRek breaks for me on any Firefox or chrome without Flash.

• Firefox error: video format or an MS type is not supported

  Customer said that the video cannot load on firefox except for other browsers.
  It shows "video format or the MIME type is not supported.
  Firefox version is 33.0.3. The video is mp4 format.

  Hi all

  I thank and appreciate all your suggestions.
  I solved the problem I posted.
  In fact, this error does not appear on my firefox browser, shows on firefox to the customer only.
  To resolve this problem, I also downloaded type of format .webm video to support the firefox browser that cannot read the .mp4 format.
  Bravo guys! Sorry for the late reply.

  Best regards
  Myat

• Satellite Pro L20: Configfree Setup error - system only is not supported

  I tried to update the Configfree with a version more recent on the Toshiba support (for PRO L20 series) site.

  Setup uninstall me the old version and after that it me to say that "the system is not supported.

  How to recover or reinstall my Configfree without using the recovery CD.

  Thank you

  I m wondering if you used the right and compatible ConfigFree Utility.
  It seems you didn t, and so this error message occurred.

  > How to recover or reinstall my Configfree without using the recovery CD.
  I don t think you will be able to reinstall it from the recovery CD without having to install the entire operating system because you will find on the only recovery CD image file. That's why it of not possible to extract individual files, the image of Toshiba programs.

  If you n t want to reinstall the whole OS using the recovery CD, then you can try putting the BONE to this early time by using the System Restore tool.

  Check it out!

  Ciao