U2415, Nvidia GTX 950, monitor wake up after the deep sleep?

Similar Questions

• Iconia 10 b3 - A20 waking after the deep sleep without rebooting

  I answered a few questions so now I'm going to ask to my .

  I had a problem with my B3 - A20 Iconia Tablet since I got it: it won't wake up if he has been asleep for more than a few minutes, unless I have hold down the power button and it reboot.

  Here's what I've tried so far:

  -A factory reset

  -Installation of all Liveupdates of Acer.

  -Run the Nova launcher instead of Acer home (this was done to get rid of that screen with the left hand, but I thought I would mention it)

  -EZ toggling reactivation

  -Toggling Acer Liveupdate

  -Configuration wifi sleep mode to "always." (This suggestion was made for the same problem in android 3.1, I understood what the heck)

  If someone has had this problem, and is there a solution? I'm pretty tech savvy (I build PCs as a hobby!), and I'm happy to install firmware etc if necessary.

  Eh, I still did and solved my problem: /. I'll save it here so that others have the solution.

  After some intensive research (i.e. googling stuff), I discovered that refusing to wake can be caused by an application hangs the system to wake up. After reviewing the various applications, I found that it was google cloud print and the Acer Smartcoverapp causing difficulties. Because I do not want to use Cloud print (applications published by the printer manufacturers are fast and efficient), and I do not have a smart cover, I have disabled both and now he wakes up instantly to sleep.

  Here's how to disable an application:

  -Go to settings, then choose "apps".

  -Slide the screen on the side until you reach the tab 'All' scroll down to find the app you want to disable.

  -Press on the name of the application

  -This will bring up a screen with two large buttons to the top: "force stop" and "disable". Depending on the application, there may be a third which reads "uninstall upgrades". If the 'disable' button is grayed out, it is a system application and cannot be deleted.

  -Click 'disable '. Depending on the application, you may be asked if you want to uninstall updates. Click Yes.

  -Fact!

  How to activate an application:

  Just in case you disabled something and then have need in the future, you can reactivate again:

  -Go to settings, then choose "apps".

  -Slide the screen on the side until you reach the ' disabled tab scroll down to find the app you want to activate.

  -Press on the name of the application.

  -This will bring up a screen with a button that says 'enable '. Click on it.

  -Fact! But don't forget to update the application to the latest version! If you do not have faffed all your settings, this happens automatically. Otherwise, go to the reading of Google, click on the three lines at the top of the home screen and choose 'my applications' - you can update the things from there.

  Hope this article is useful.

• keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium

  keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium.  I received once posted this question, an answer of "fix" to a thread that has worked.  Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything.  Could someone please re - send the wire?  I promise you that I'm deleting it this time.

  Thank you very much

  E-mail address is removed from the privacy *.

  Hi RICH0214,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539 (applies to Windows Vista)

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Create a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• ulitmate local Vista only after the mode "sleep" loses the IP address each time.

  Ulitmate Vista wired ethernet.  After the mode 'sleep', 'local only' on awake.  Loses to IP address each time.  IP address needs to be reset.

  Hi C.Jaye,

  You can check out the following link and try the steps to solve the problem:

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/f21fcdda-4372-469d-b983-f4bd50d7f81d

  You can also read the following article and check if it helps:

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HDD turns off after the mode 'sleep'?

  I would like to know if the hard drive would turn out or not after the mode 'sleep'.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  The computer do not hibernate unless it stops the disc after writing the hibernation file.

  Mode for similarly low-power stop discs 1

• HP Envy 14 w / Nvidia GTX 950 m: degradation of Gaming Laptop HP Envy

  Hello

  I recently bought my laptop HP Envy a year ago and I used it moderately for school and work. I made sure to buy the GTX included 950 m graphics card so I could play some of my steam games and I'm just starting to achieve a degradation in the performance of my laptop. I do not speak of degradation when I bought the laptop so far but I'm not talking about just playing a game and having amazing performance (graphics on medium-high and about 50 to 60 images per second), but after like 5 minutes of play he is slowly starting to soak as 14-15 fps. In particular, I tried playing Overwatch today and had an amazing gameplay for the first 5 minutes, but I dropped up to 15 images/s and it's hardly playable. I tried to change the resolution and that seemed to have fixed however the same problem happened five minutes again.  I have no idea why my laptop it would especially since I have not really used a lot for the game this year and I'm sure to maintian computer performance by updating the drivers, reboot often and defraging.

  CrazyAce

  I think that I finally found a solution to the problem. I was on my laptop of friends (which is similar to mine) and noticed that she had not updated its geforce experience. So I've updated for her and she began to notice the same problems I had. It turns out that this experience of NVIDIA GeForce is not really necessary for the games because it does not include the graphics driver. So as soon as I uninstalled, all started to run surprisingly. Time just in the better together performance and faster startup, no fps drop. Who would have known to try to uninstall the software, only that I have to refer to the graphics card to make my graphics card will be smoother and does not affect my computer.

  Thanks for the time to help out me if. I'm so happy that I figured this out.

• U2414H, Dual, laptop, Windows 10, Nvidia GTX 960 M, no STDS to the second monitor?

  Hi all

  I hope that I have included all relevant information in the present, but ask if I missed something. I bought two of the screens U2414H and a Windows 10 laptop computer powered by GTX 960 M with HDMI and Mini DP ports. My goal was to be able to the Garland of the whole U2414H screens so I could use my laptop out and about, and when connection back to the monitors of would have to plug in a cable and get two screens. In theory, but...

  I followed the instructions and using two Mini-DP to DP cables, connected the mini laptop RFP RFP on the first screen. DP on this same screen highlights Mini DP on the second monitor. I activated the DisplayPort 1.2 on both of these screens. I can't get any signal on the second monitor, it boils down to the power saving mode.

  Otherwise, I decided I would try using two cables and ditch the idea of DP STD I can at least use the two screens. So I have laptop HDMI to a screen and the MiniDP to another, and therefore, that alone will never work at a time. Individually, they work very well, both with HDMI or DP. But the two connection fails every time. When I tried to connect a display of alternative supporting HDMI as the second, which works very well.

  So I had an autour reading and it seems that it is common to have problems of connectivity to these screens. This brings me well on my two questions:

  (1) is there something that would work?

  (2) assuming that there is nothing that works, Dell can swap these screens for two that will achieve what I need?

  Thank you

  Dave

  In MST, DP 1.2 should be turned off (disabled) on the second monitor.

  Laptop AMD on--> U2414H CDM to cable DP--> DP U2414H #1 in (DP 1.2 enabled) (Port #3 in the image)

  
  #1 U2414H (Port #5 in photo) DP--> DP U2414H CDM cable--> 2 # U2414H CDM in (DP 1.2 disabled) (Port #4 in photo)

  When you use only no STDS, is the lid of the laptop open all trying to run two monitors of U2414H? This laptop can even run three screens, laptop LCD + 1 # U2414H + 2 # U2414H?

• NVIDIA gtx 950 m no vista da photoshop cc2015

  Salvo ho UN grosso asus laptop un problema con scheda grafica gtx 950 m, problema: knew prestazioni di photoshop non mi fa mettere it flag scheda grafica

  Ho con solved the versione driver 361.75 reinstallato photoshop cc.

  I have driver con piu non andava comments.

  comunque Grazie

• HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

  I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

  Hello @MAlex_B,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

  Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

  Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• New place doesn't wake up after going to sleep

  I'm frustrated with my new coming 11 Pro, because 9 times out of 10, each time that I put it to go to the mode 'sleep', or he falls asleep, he wakes up not again. It seems to go to sleep very well and I push the button once to wake him up and vibrates it immediately for half a second. But then it never wakes or turn on screen for several minutes. I try the power button again to longer and eventually it starts and all my programs are closed and the computer restarted unexpectedly. What could be the cause of the computer to not again wake up after sleeping? It happens that my keyboard is connected or not, but if he plays well, then pressing the button start he wakes up. (It is rare that he wakes up actually sleep).

  Hi rpseekell,

  I'll suggest that you ask questions out of 11 in the forum of mobile devices.

  Good luck!

• Monitor does NOT display the icons on Start Up, after the fashion 'sleep', etc.

  I recently bought my computer (last Monday) and the monitor turns on so I can see the wallpaper. However, no icons appear! If I unplug the monitor from the power supply and then plug it back it, is! the icons!

  I wanted to post here before contacting HP, because it can be a quick fix and I can't sit on the phone for who-knows-how-long.

  I have the HP p7-1234 and the monitor model number is HP2011-xi. I have Windows 7. Any help would be appreciated.

  Thank you!

  So... Guess what I learned?

  How many cables you have plugged into your monitor?  All came with a white and blue, and I connected the two.  Apparently, this causes the problem, as the two cables are designed to provide both screens.

  Disconnect the blue wire from the computer and the monitor, and then press the "Windows" key with the letter p at the same time.  Make sure 'computer only' is selected in the pop-up window, and then press ENTER.  This, according to an HP support technician, should fix the problem.

  The instructions should make that more clear that the two cables must not be connected on a single monitor, but it can also be common sense for those who have experience with two monitors.

  I've yet to leave my computer unattended to see if that solves the problem, so let's keep our fingers crossed.

• P2715Q, Windows size and location change after the mode 'sleep'

  Hey

  After that the monitor wakes up fashion 'sleep', all the windows are in the upper left corner and in different size just before going to sleep. It makes me crazy. Did not help. Found a few registry hacks key, but it can't be that difficult.

  I use following:

  View P2715Q Dell, Windows 10 Pro GTX 1070

  Everything is up-to-date.

  Really hope you can help me!

  #update 1

  It has something to do with how long the mode 'sleep'. I set the Sleep mode function 1 minute, whereas the display 'falling a sleep' and woke up after 30 seconds or more. Everything was in place.

  This isn't a question of monitor. It is a video card driver problem. Tiles from 1920 x 1080 uses two P2715Q sewn together by the video card driver to get the resolution of 3840 x 2160. So if the video card driver is slow to initialize the awakening from sleep mode, all open windows and icons are tossed at top left. We see this issue "tile" on AMD and Nvidia drivers. All you can do is to continue testing video card drivers latest when they are released.

  Workaround solution =
  * Spend 90% of your icons to the taskbar or the far left background
  * Close all open windows before allowing computer standby modes

• DVD - ROM drive not detected after the mode 'sleep'

  I have a HP DVD1170, and it works very well after starting.  After putting my computer in mode 'sleep' and then he wake up, my computer took in not recognizing that there is even a connected DVD player.  He is a recent problem. I got Windows 7 since the beginning of November, and the problem only happened last week.  The drive works again after the restart, but it is not recognized if I put the computer in mode 'sleep' again.

  Hello Neohippie7319,

  Thank you for your message.  You can also click HERE and run the FixIt!  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Waking up after the mode 'sleep'

  My macbook pro doesn't wake up when the two screens are linked via thunderbolt. I have to restart every time.

  Reset the SMC could solve the problem.

  Reset the management system (SCM) controller on your Mac - Apple Support

• L750D-1DQ satellite - black screen after the mode 'sleep'

  My new laptop L750D 1DQ does not start correctly after the return of the mode "Eve".
  The screen is very dark, I can't seem to clear up.

  I tried the combination FN + F7, but it does not work (and other shortcut keys do not work ether).
  When I restart, the screen works again.

  What must I do, so I can start to work after returning from the mode "sleep"?

  Hello

  You are able to change the brightness in Power Options Win 7?

  Check this box:
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  You can choose a power plant that is enabled in the profile of power you use.
  You will see the option to adjust the brightness of the plan.
  Set the control to the right to increase the brightness. Do this for setting battery and area setting

  In addition, you should go to advanced-> display settings
  Here, you must choose the brightness of the display and need to change the value of %. This defined the default display brightness when battery and AC power running