U2515H CDM/DP, single computer DVI out?

Similar Questions

• My Nano Gen 7 is recognized on a single computer, but not the other

  My Nano Gen 7 is recognized on a single computer, but not the other.  I went through all the troubleshooting tips.  Different cables, try all USB ports, uninstall/reinstall itunes, etc.  I have itunes more up-to-date software.  I was able to connect the ipod to my backup computer and confirmed that I also have the software more up-to-date on the ipod.  Since I am able to connect to it, I also did a factory reset the iPod, but it still wouldn't connect to my main computer.  Nothing has worked.  I think there must be a setting on my pc.  I use the latest version of windows 10.  Any suggestions are welcome.  Thank you

  I just bought an Ipod Nano 7th generation and itunes does not recognize it.  Had by all the standard troubleshooting (uninstall/install itunes, etc.) and no luck.  My PC recognizes, he calls the 'nano' but acknowledges as a USB mass storage device.  I spoke to a support person from apple for more than an hour to help me troubleshoot it, finally they just said it was a windows problem, and I need to contact Microsoft.

• Professional information package launched by mistake on my Mac. Since then, the computer is out of order.  The app is always open to the dock, but cannot close or force quit it. Power button doesn, t make a stop. Computer is NOT frozen, but apps does not

  Professional information file on my Mac. Since then, the computer is out of order.  App always opens in the dock, but cannot close or force quit it. Start button / stop is not make a judgment. Computer is NOT frozen, but apps does not open. Cannot shut down, restart, or use something else! Help!

  If you hold the button power for more than 10 seconds, it will not shut the MBP?

  Try a SMC reset:

  https://support.Apple.com/en-us/HT201295

  Ciao.

• I have different bookmarks I want to keep on each computer, synchronization will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place

  I have not yet used sync, but I sense it's going to be a problem if I do. I have different bookmarks I want to keep it on each computer. Sync will delete the bookmarks on a single computer and replace the bookmarks from another computer in their place? So I think that will erase the bookmarks on the second computer you configured to synchronize. Is there a way to merge bookmarks on every computer in the library of a bookmark that contains all bookmarks on both computers, so I'm not all bookmarks in sync?

  Just to be clear, this is something that we have commented several times in the forum, Firefox Sync adds everything that is already in the device for the account and pushes this info for the rest of the devices.

  So if you have 2 computers with data X and the other with the data from there, once you set up synchronization in both computers you will have X + Y at the same time.

  I hope that clarifies the doubts...

• Synchronization on a single computer.

  Hello
  I reinstall my operating system after accident, installation of firefox and set up synchronization using my sync key, but it does not, where are my favorites, settings, passwords?
  Maybe understand something wrong? The synchronization works only not on a single computer, need two or more?
  Will be possible recovery of my favorites, settings?

  Hello!

  Sorry to read this. Unfortunately, Firefox Sync is not a backup service and information is stored on the servers temporarily for the rest of your devices can get the information.

• Pavilion ELite HPE-250f: ATI Radeon HD 5770 have double or Single Link DVI

  I have a HP Pavilion Elite HPE-250f come with a special version of the HP of the HD5770 AMD. Features HP say the Single-Link DVI. However, the Board of Directors contains 2 DVI - I connectors, which suggests that it is related to two. I want to buy a 2560 x 1440 screen, but it requires a DVI Dual-Linked. Can anyone confirm that the version of HP is double-linked or indead SIngle-Link? Thank you.

  Hello

  From the following link, it says DVI dual-link:

  http://www.Walmart.com/IP/HP-HP-HPE-250F/14271926

  I hope this helps.

• Cannot read the video error code is 8007000E computer ran out of memory.

  OT: Media Player
  I recorded the video with lightwave usb webcam when I tried to read that I got the error message that my computer ran out of memory and so I should close other programs and try again. The error message given is C00D11C6 and gives as origional error code 8007000E

  You can help me solve the problem

  Joseph

  Hello

  1. don't you make changes to the computer before the show?
  2. do you have any third-party codecs installed on the computer?
  3. what operating system is installed on the computer?

  Method 1
  I suggest you to run the fixit from the following link:

  Fix Windows Media Player video and other media or http://support.microsoft.com/mats/windows_media_player_diagnostic/ question library

  Method 2
  In the meantime, download and install MPEG-2 DVD decoders and check if that helps fix the problem:

  Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

  http://support.Microsoft.com/kb/306331

• I'm going on vacation and need access to my computer then out. How can I do this?

  Original title: remote access

  I'm going on vacation and need access to my computer then out. How can I do this?

  Hello

  Which edition of windows XP you are using?

  See the articles that may be useful.
  How to use the Windows XP Professional Remote Desktop feature
  http://support.Microsoft.com/kb/315328
  Installation Windows XP Remote Desktop Web connection
  http://support.Microsoft.com/kb/284931

• I need to download windows xp service pack 2 on a computer professional home for a single computer.

  I need to download windows xp service pack 2 on a computer professional home for a single computer.

  I am the administrator please help thanks vicki.

  Links to a downloadable version of all Service Pack for Windows XP updates can be found here:

  "How to obtain the latest Service Pack for XP"
    <>http://support.Microsoft.com/kb/322389 >

  Ignore any verbiage that says "for the professionals' because that's exactly what you're looking for.  They put that when service packs have been made public to cut down on bandwidth for everyone both this download.

  HTH,
  JW

• My 'C' drive is full of 98%. What should I do to keep my computer running out of space?

  My 'C' drive is full of 98%. What should I do to keep my computer running out of space?

  You can visit your C: drive and straight copy / paste your images and data that keep a lot of spaces in an external hard drive.

  If you want to save, then take a look at:

  http://support.Microsoft.com/kb/308422

• Computer locked out, says incorrect password, has not changed the password.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: computer locked out, says incorrect password, haven't changed the password.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  These things don't happen by themselves. Once you're in the system, do a thorough analysis of the malware.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• Install the SP1 and SP2 on a single computer?

  I thought installing SP 2 on my Vista computer.

  But I see that Microsoft tells me that SP 1 is a sine qua non for the SP 2.

  When I go to page 1 SP from Microsoft it tells me that it is not necessary to install Service Pack 1 - just turn on Windows Update.

  Windows Update is enabled on my computer.

  So should I install Service Pack 1? SP 2?

  ... But I thought that SP 1 is not for individual computers?

  Presumably to the Windows Vista Service Pack 1 five language standalone (434.5 MB!), which is not intended to be use on a single computer, but Windows Update will provide & install SP1. The download of that Windows Update uses is considerably smaller.

  Now that SP1 is installed, the prerequisite updates SP2 (for KB955430 and KB947821) should be offered by the automatic updates very soon. [1] once the installed updates, automatic updates should offer SP2.

  Yet once, SP2 must be installed by on Tuesday, July 12, 2011 for your computer receive additional updates (i.e., updates published after July 12, 2011).

  Other references:

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  Learn how to install Vista SP2
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Windows Vista service packs are not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  ===============================================================
  [1] Microsoft plans to release an updated version of the KB947821 on Tuesday, May 24, 2011.

• The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

  The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  Hello

  It seems that the blackberry is not more.

  Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

• How to install two operating systems on a single computer

  Original title: windows

  How to install two operating systems on a single computer, xp and windows 7... ?

  Hello

  Thank you for contacting Microsoft Community.
  For the installation of two Windows OS (called Dual Boot), you first determine what exactly the BONES. Based on this, you can proceed to install the oldest operating system first, then installing the latest OS. Here, in your case, Windows XP first and then Windows 7.
  If you change the order, the latest version of Windows will not work correctly.
  In addition, you can use Virtual PC or VMware to use Windows XP in Windows 7. Windows XP Mode is another version of Microsoft which allows you to use Windows XP in Windows 7 through Virtual PC. You can download Windows XP Mode from here:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx
  To install Windows XP Mode, you must have Windows 7 Professional or higher, with hardware virtualization enabled in your PC (you should check in the BIOS of your PC). If you prefer Windows XP Mode, you don't have to install Windows XP in the above mentioned way. It installs like any other program on Windows 7.
  Note that if you have Windows 7 Edition Home Premium or lower edition, you can try Windows XP using Virtual PC/VMware or dual-boot.

• I need to deploy a single application to a single computer or user. How can I do that.

  Hello

  I am new to SCCM 2012 R2.  I need to deploy a single application to a single computer or user.  How can I do that.

  Thank you

  SlimKalim

  Tip 1: ask in the Technet forums and not the forums of final consumers.  ;-)

  SCCM 2012 / 2012 SCCM R2?

  https://social.technet.Microsoft.com/forums/en-us/home?category=systemcenter2012configurationmanager