U2713HM, max resolution with a laptop without DVI and DisplayPort?

Similar Questions

• Connectors HDMI, DVI and DisplayPort on the video card, do I need a special DP to DVI connector?

  HPE H8 1280t HDMI, DVI and DisplayPort on the graphics card.  I want to connect 3 monitors HP,

  1 do I need a DisplayPort to DVI cable do

  2. do I need a special DP to DVI cable, or will be a lot of work.

  3. is there another way to do it?

  Hello

  DP and DVI ports using digital signals, no conversion needed, so you only need something like one of them:

  http://www.shopbot.com.au/DisplayPort-to-DVI-cable/price/Australia/320660

  Kind regards.

• latitude dell max resolution with e-port replicator

  I have the following scenario:

  • Laptop: Dell Latitude E6420 i7 with Intel HD Graphics 3000
  • Monitor: Dell 3007WFP 30' (up to 2560 x 1600 resolution)
  • Docking station: e-port replicator for Dell T308d
  • Adapter: Dell Display Port to DVI - D adapter cable DP/N 023NVR

  Problem: the screen 30 '' Maximum available resolution is 1280 x 800.

  Question:

  Say that I can't get the monitor resolution of 2560 x 1600 with the integrated Intel HD3000 card or the e-port replicator as the laptop has no native DVI - D Dual Link, I should be able to get at least 1920 x 1080 per display port. No difficulty to get the best resolution of 1280 x 800?

  Among the measures taken so far:

  1. The monitor has only a DVI - D Dual Link port so I use a DVI - D Dual link to cable DVI - D Dual Link to connect to the docking station does not work, I read somewhere that the e-port replicator is actually DVI - D Single Link inside so won't work because the monitor needs native DVI - D Dual Link.
  2. Using the same DVI - D Dual Link connection cable double DVI - D, but this time I add a DVI - D Dual link adapter port screen and connect to the port of display in the e-port replicator port, always the same question.
  3. To connect directly to the laptop using DVI - D Dual Link to HDMI Cable, always the same.
  4. Also tried manually add resolutions custom in the Intel like 1920 x 1800 Graphics Control Panel, or by using p 50 Hz frequency refresh, 30 Hz, etc. timing standard CVT or FTE or CVT - RB. When I apply these custom settings, the monitor screen goes black as if it does not support so it changes again in 1280 x 800.
  5. All the drivers are up to date.

  Help will be greatly appreciated! -

  You will need an active displayport to DVI. Here is the link to the purchase page.

  http://Accessories.Dell.com/SNA/ProductDetail.aspx?c=us&l=en&s=Gen&SKU=a7102180

• I have a problem with my laptop system restore and I can't open it

  Original title: Please help me
  -----

  Dear friends
  I have a problem of my laptop whit system restore and I can't open it.
  A few days ago, my windows xp reboot both and colud not restart my computer. I had to use my back for recovery system because the other option as in mode without failure or last good configuration didn't ' work corectly.
  This event occure to me several times and I am very confusede on this subject. . I have latest version of avast anti virus in my laptop. Please guide me and give me your solution for my problem towing?
   
  Thank you for your kidness

  What happens and what do you see when you try to open the system restore?

  When you say things "did not work", we need to know which "did not work" means exactly... I get an error message, nothing seems to happen, the system crashes, etc.

  Try answering the following questions, the better you can:

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• How do I reset my computer new laptop without password and remove account that does not belong me

  I got my laptop back to scambag, I can just turn on and off my laptop now, been trying to recover and return to the point before stolen, but that CAC always there with the locked password. What can I do?

  Try typing in the F11 key immediately after powering on - choose Recovery - no system system restore.

• HP Notebook: My Ethernet cable supplied with the laptop is damaged and needs new cord. How can I get a new one.

  Need new Ethernet cord that attaches to my router. But I have an extra cord (yellow) for my router. Can I use this rope? The case where and how to get the new cord. Connection is lowsy...

  Hello

  Many router vendors include a CAT5e cable with routers and in many cases, they are yellow. Didn't the yellow cable come with your router? If Yes, you can use it.

  Kind regards.

• BlackBerry Smartphones Blackberry Curve 9300 3: Problem with the camera without flash and don't take pictures

  Hello!

  I have a Blackberry Curve 9300 3 phone. Until recently my camera was working fine that is the camera takes pictures. But recently I can't take pictures. I can access the camera screen I can zoom in I can see old photos but when I click on the camera icon to take a photo there is no flash and no picture is taken (as a video of tmy note side works fine)

  Any ideas of what can be the problem? Also is it a good idea to remove the battery to fix the problem and if I did so will alll my similar memos, contacts etc. be erased?

  Thank you very much!

  removing the battery may fix some glitches on the phone but it clear files from the DOE.

• Networking my laptop Windows XP, and the Windows Vista desktop

  Hello

  Can someone help me with my laptop Windows XP and Windows Vista desktop network?  Despite many attempts (and failures!) I was not able to get the two machines on the same network.  It's very frustrating because I'm unable to access the documents from one computer to another, i.e. file sharing etc and have spent ages trying to do this!

  I would be very gratful if anyone can solve this for me!

  Kind regards

  Here is an article on how do: http://www.informit.com/articles/article.aspx?p=1165037.

  Here is another article on how to do it: http://technet.microsoft.com/en-us/library/bb727037.aspx.

  The next thread can shed some light on the process (and provides a number of useful links):http://forums.techguy.org/networking/545552-how-do-i-network-my.html.

  I hope this helps.  Read all the articles and their references before you start, then use the one you think is the best and follow the process as indicated.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• U2713HM monitor - cable DVI standard / max resolution

  Hello.  I just received a U2713HM monitor (from the output of Dell) and connected to my video card (ATI Radeon HD 5450 in a desktop Dell Studio XPS 8100) with the supplied DVI cable.  I am allowed to select the maximum resolution (2560 x 1440) but when I do all past "fuzzy" and "pixelated" in white.  If I lower the resolution 1920 x 1080 then everything works fine.

  A little on my own, including a few similar questions posted here, I think that my video card should certainly support 2560 x 1440, via the DVI port but that the cable delivered with my monitor is a single instead of double link link (I checked this in another post on this forum that included a photo of what single bond and double connectors look like) , and that the double bond is necessary to get the max resolution works correctly?

  I you'd be grateful if someone could please confirm my assumption of what's going on and also cables dual link DVI should come standard (through the output also) with U2713HM in view of its resolution monitor?  Or is there any other question that I'm not aware of that could cause this problem instead?

  Thank you very much.

  Technical contact Dell Support. Tell them that making Dell sent you incorrect wiring for your monitor U2713HM. Provide your monitor e-mail, service tag address number, delivery address, telephone number. Ask them to set one up in order to send you the following missing cables:
  Cable HCX4X or DL DVI - D MPGMR
  DN137 VGA cable
  Cable USB3.0 PN81N

• With the help of a laptop without battery

  Use the laptop without the battery course... because some people say its not recommended to do so if they affect other components of the laptop. So is to use a laptop without the battery safely.

  What they say is true. With a battery that the laptop is protected against the fluctuation of voltage, the power cut etc. Also you will reduce the ability of your laptop to be mobile...

• What is the resolution of the max screen with speed Port Replicator Hi (PA3838E-1PRP)

  Hello

  I have a Toshiba Portege R700 - 11 p and I want to buy a duplicator of Port speed Hi (PA3838E-1PRP), but I want to know the maximum screen resolution with ang VGA HDMI on the port replicator.

  Thanks in advance for your answer

  Hello

  The maximum display resolution depends on the laptop (graphics card) and the external display that is connected to the port replicator to Port Hi-Speed.

  The internal graphics INTEL QM57 (incorporated into the Portégé R700) overview card provides this info:
  http://www.Intel.com/products/Notebook/chipsets/QM57/QM57-overview.htm
  + This chipset supports the DisplayPort interface * with a resolution up to 2560 x 1600. +

  Therefore, check the properties of the external monitor.

• I tried to connect wifi with my laptop, including wireless I use for a month now, but shows only 2 blue screens without the world down on the right, and he said "unidentified network".

  "Unidentified network".

  Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanks

  Go to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.

  Do not put a check in the box: remove the software driver for this device.

  Restart your computer and Windows will install your wireless network.

  If the problem persists, see if your computer manufacturer has an updated driver.

  These articles may help:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://support.Microsoft.com/kb/313242

• New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  VAIO laptop

  New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  To restore the software preinstalled on the computer, or to install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

  Sony support:
  http://eSupport.Sony.com/

• How can I remove Vista and replace it with XP on a Dell laptop without losing my partition to factory?

  Vista has conflicts and no current update on my laptop and the mouse keyboard, so it is erratically. Since an upgrade of Vista has been added to my laptop, it has been in place. The cursor seems to have a mind of its own and I can't change the mouse settings. There is not an update to Vista since the device mouse or keyboard. After countless hours of lost looking for a solution, I decided to give up the garbage of Vista and I refuse to pay more money for the upgrade to Windows 7. So I want to go back to XP, but I can not install XP with the installation disc that came with the laptop. It stops the installation and tells me that I have a newer version of Windows. What I read, I have to do a clean install, but I want to do, so I do not lose the hidden partition that has been installed by Dell. Any help would be greatly appreciated! I've used Windows years but this abortion of Vista is too heavy for me. And it's like cancer, I can't seem to get rid of it! Time to think about a Mac soon, I guess.

  A clean install will go to the C:\ drive and does not affect your partition recovery disk D:\ (as long as you tell him installed on C:\ assuming the disk that is the drive of the current system and disk D:\ is the recovery disc).  Note that, with a clean install you will lose all your data (everything on the partition - not everything on the disc if it has more than one partition) then you should backup your data first.

  Here is more information on the operation of a clean install: http://www.winsupersite.com/showcase/winvista_install_03.asp.

  Frankly, I would transfer this question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in Windows Update issues will be more than happy to help you with your problem.  Perhaps, it can be fixed without the need to resort to the downgrading to XP (and these people would be able to help as best as we).

  Keep in mind that Mac have their own set of problems - different from Windows, but they are not without problems (and you probably have some software that works with Windows and it would be a shame to lose that).  You just need to help solve your problem (or, if you wish, to return to XP which is probably more stable than Vista).

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• I can get online with the Ipad, but neither my laptop without the ethernet cable. Help, please

  For some time, I was not able to access the internet on my laptop without the ethernet cable, but I have no problem with my Ipad.  I recently changed my security of Mcfee, for EXAMPLE.  Help, please

  Hi Lizgill,

  You receive messages or error codes?

  You can try the following steps and check if it helps:

  Method 1:

  You can review the article and check if that helps:

  Windows wireless and wired network connection problems

  Method 2:

  You can also temporarily disable third-party security software and the firewall installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.