U3 USB stick 4 GB does not work with Vista

Similar Questions

• Logitech USB microphone does not work with Vista, Service Pack 2, PC. ____

  My Logitech USB Desktop Microphone does not work with my Vista, Service Pack 2, the PC.  He asks the driver, but Logitech says it's in the Vista software, here is the largest part of the error message:

  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site.

  Signature of the problem: Problem event name: PnPDriverNotFound Architecture: x 64

  This seems to be a problem that's happened, but after searching for hours, I can't find a quick solution.  Any help?

  Hello

  Please do as I suggested in the answer above is probably the solution.

  You can also do this after the above.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Re: Satellite L300D-13s - WiFi does not work with Vista

  I have a L300D-13s that came with Visa Home Premium on it.

  His work very well outside the wireless that refuses to work.
  I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

  The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

  If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
  Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

  Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
  If the problem obviously lies with Vista and/or the drivers.

  If someone has solved this.

  And no - don't tell me to go out and buy a router "Vista compatible".
  If Vista does not work with router XP and other operating systems compatible with Vista is wrong.

  Hello

  > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
  I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
  In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

  I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

  Maybe you should try that too.

• Satellite A215 S4767 Chicony USB 2.0 camera does not work with Skype

  I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
  I checked the drivers and they work, I have 10 Diretcx and it works.

  When I open the camera program, it works well.
  I put the camera program is not at initial start-up of laptop.
  I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.

  Yesterday, I had installed the Skype 5.5.0.114 version and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  Hello

  > Yesterday I had installed version Skype 5.5.0.114 and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
  You should check if the webcam has been chosen correctly in Skype video settings.

  If this does not work, uninstall the 5.5.0.117 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 5.5.0.117 again if not check the 5.5.0.114 a version that worked correctly in the past.

• Scanner does not work with Vista Windows Equium A210-171on

  I have a Toshiba equium laptop (Vista)
  I am wanting to buy a scanner so I can scan documents to computer. (I have an all-in - one but the scanner does not work)

  Please indicate where to go?

  Thank you

  Hi Suzanne,.

  Sorry, I Don t understand why you want to buy a new scanner. First of all, it would be nice if you tell us what satellite you have. Other useful information would be exactly, what does NOT work on your satellite and your 'all-in-one '...

  Please provide more information on this subject and maybe you shouldn't buy a new scanner.

  THX

• Windows Installer does not work with Vista Home Premium 32-bit system.

  My computer did not an automatic update in over 6 months.  I discovered this when I could not install my tax preparation software.  the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  sfc/scannow
  

  For the results of the SFC
   
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

  The system update tool

  Ensures the consistency of the folder WinSxS (Side by Side).

  http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Reregister Windows install

  Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll
  c:\Windows\System32\Msiexec.exe/reg

  That you re-register Windows Installer.

• HP4050 does not work with Vista.

  I did all the uninstall/install as shown in several places and nothing won't print. I get just "printing error" in the status area.

  This worsens the problem as it used to work fine. It got to where I could unplug/plug in the printer so that it and the laptop, or restart the laptop and the dependiing overnight, one of them would solve the problem. Then, it is to reinstall the drivers, and it worked for a while before returning to the steps of the power.

  Now, it does not matter. No printing. No "job processing" flashes on the printer, only "printing error" when I opened the Printers folder.  I'm on the good (and default) printer and the correct port. All connections are good and the printer works on an old laptop w / XP and ALLOWS to work on my other laptop, also with Vista. Now it does not work it reliable either.

  Using the correct driver for Vista 32-bit, so it isn't.

  It is a great printer and buy another isn't on the horizon of affordability.

  Hello

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Printing problems? Try the Windows HP Print Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02726548&cc=us&DLC=en&LC=en

• Dynadock does not work with Vista

  Press releases USA Toshiba the Dynadock was WXP and compatible with Vista, but it's NOT.
  Nobody knows when it's released software / or ways to get the Dynadock to work with Vista?

  Hi Stuart

  I put t know how it works in the United States, but here in Europe, according to the specification Dynadock, it only works with Windows XP SP2 home edition. I don't think someone can give you info on support for Vista especially here in the user forum.

  Try to learn more, contact your local dealer or partner authorized in your country.

• WLAN manager does not work with vista 64

  Hello

  Recently I've upgraded to Windows Vista 64 bit because I bought the additional RAM. I downloaded the drivers for my USB wireless adapter (which is a WUSB54GR), but they do not come with Wlan Manager. I tried to install the WiFi Manager since XP drivers, but it won't work.

  The reason why I want this to work is that there are several SSID on my network with the same name, and I want to choose the best of them. Vista indicates the name once only and does not automatically select one that suits, and now I have lag spikes in games like World of Warcraft.

  A good third work program would also work I guess, or a vista/hotfix patch for it.

  Need help please, I searched the internet for this many times with no effect

  Thanks in advance.

  Thanks for the reply. After some research more, I found out it was something else that caused the lagspikes.
  Windows Vista checks to see if there is a best available wireless connection every minute or so.

  I downloaded a little program called WLAN Optimizer .do, it runs in the background now and my connection works great.

• Toshiba HDD Protection - Shock Sensor Driver does not work with Vista

  I have improved my Tecra M7 for Vista Ultimate last weekend and there are a number of things that do not work. It's very frustrating because I followed the procedures shown on this website diligently upgrade and will have problems.

  Can someone tell me what zip file contains the utility Toshiba HDD Protection shock as I installed everything (except the Config Free because the Zip file seems to be corrupted) and I can't find it anywhere. I noticed that when Vista was recommend the automatic updates after installation it is recommended an updated driver for the HARD disk Protection utility, but is nowhere to be seen and I can't find an installer for anywhere. Does anyone know how to handle this?

  Thank you very much

  Chris

  I don't know if it will help, but try to use the utility disk for Tecra M9 protection.

• Age of Empires II does not work with Vista or Windows 7

  I could not get Age of Empires II working on my laptop - first with Vista and now Windows 7.

  It installs OK and when you go to launch the small graphics launch box comes up, then the screen becomes phsychedelic before returning to normal and nothing more.

  It is a Compaq Presario with a chipset Mobile Intel R45.

  Any advice?

  RusFry,
  If you weren't able to get the game to run in that same laptop with Vista or Windows 7, it seems that there is a conflict of material with this game.  I see that this game was for older systems and only supports graphics 800 x 600.  You can turn your the desktop resolution to 800 x 600 with 256 colors, and then run the game.  If this does not help then you may install DirectX 9 and see if that helps. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Toshiba secured 500 GB does not work with Vista 64 bit

  I bought a Toshiba 500GB (PX1668e-1he0) guaranteed, and I can't install it on my PC with Windows Vista Ultimate 64-bit.
  On the box says it works at least with Vista, but I can't install it.
  When I plug it i and autorun start I have an error message: the digital signature is not valid and it is impossible to install it.

  Now, I've read that this device must be compatible with 64 bit OS
  http://APS2.toshiba-tro.de/KB0/OPT1103320000R01.htm

  What can I do to make it work?
  Why Toshiba still sell this device if it is not compatible with the current operating system?

  Is it possible to update the digital firm pilot?

  PS.

  The security problem is on:
  Audit with the following \XXXXX\BIOLOGIN\securelogin-x64.sys file of Microsoft Windows security

  Hello

  Yes, according to the document, it is possible to use this HARD drive with 64-bit system.
  The software is updated

  As far as I know, you can connect the HARD drive to the PC then right click the CD part of the hard drive you and choose install or program.
  Should work

• Toshiba Tempro does not work with Vista 64 bit Ultimate

  Why Toshiba Tempro don t works with windows vista 64 bit ultimate mey Satellite A300 - 1 l 4?

  Any idea where I can find a solution?

  Thank you very much

  Hello

  I m not very well why it doesn't work on Vista Ultimate, but to my knowledge, there are a few Vista Toshiba Utilities and tool that are not fully supported by Ultimate.

  But why you use Tempro? This tool reports only if a new driver has been transferred on the Toshiba driver page.
  OK, it's interesting to know that a new driver is available, but if your laptop runs without problem I wouldn't update or reinstall anything s!
  There is a proverb which says: never change a running system.

  Welcome them

• Satellite Pro L10: WLan does not work with Vista

  Hi all

  Have tried to get the WIFI adapter works on Vista, have downloaded the latest drivers but still no joy.

  I know it works because I have a dual operating system: XP & Vista.

  All ideas,

  Thank you

  What do you mean exactly by still no joy? Have you installed the right driver WLan and has been the WLan card recognized in the Device Manager?

  I think the laptop is using wireless Mini-PCI Intel PRO/Wireless 2200BG Network card.
  In order to check again if a good driver was used.

  Please don t be angry with me, but it is a book of 5 years and I m sure that it s not Vista capable of course you can install Vista on this unit but it of not impossible that some devices would not 100% compatible.

• Wireless does not work with Vista on a Satellite L30-10DS

  How do you get the WiFi to work on vista?

  Hello
  Your question implies that you couldn t your work wireless home or both.

  This way, you first make sure you that if you really have wireless or not. It s not that hard. Just look in the windows Device Manager.
  If a wireless card is installed, then give feedback and maybe we'll find a way to connect with something as an access point.

  If no, then buy a card and let it install by a qualified technician, you can also apply this technology for the wireless connection. :)

  Welcome them