U3014; problems to get maximum performance via HDMI

Similar Questions

• MacBook Pro & Samsung Smart TV: could not get the display via HDMI

  Hi Forum members,

  I'm not able to get the display of macbook to smart tv via HDMI cable.  Here are some of the conclusions that I have. Can someone please shed some light on this weird question.

  MacBook Pro Rentina 13 "El Capitan 10.11.5.

  Samsung Smart TV 48 "UA48J6200

  Crush - HDMI cable.

  
  

  -TV says 'No Signal'.

  -J' checked the cable is good since I'm able to get my Dell Latitude processors E7450 and controller display.

  -Go to Preferences > display. I see no possibility to detect the display etc...

  -Able to connect same macbook to the sony smart tv at my friend using the same cable and it's all good.

  At this point, I am not able to understand where is the problem... TV or Macbook

  Thank you.

  Hmm. Have you tried to get your friend or someone connect to your Samsung Smart TV?  It does seem like your Macbook or the cable are the issue.

  Edit: actually re read your post. I think that to see the option detect go to Preferences > poster under view press on and hold down the option key. bottom right, it should appear.

• Get her out via hdmi

  I use an Envy15 on Windows 7 Pro.  When I connect my laptop to watch a DVD through HDMI, I get video on my TV, but the sound is produced by the speakers of the laptop instead of my sound bar.  I looked in the Beats Audio Control Panel to adjust a setting but couldn't fid nothing relevant there. Any ideas?

  Hello

  Try the following.

  Open windows control panel, open Device Manager and open display devices - note equipment listed here i.e. ATI, Nvidia or Intel.

  Then connect your laptop via HDMI to your TV.  Do a right-click the speaker icon in the taskbar, and select playback devices.  Once (just to emphasize the entrance), the HDMI output which has the same name as your graphics card, and then click the set as default, see if you now audio left click.

  Kind regards

  DP - K

• Can I get maximum performance with dual processor socket

  Hi all

  a dealer offer me a HP workstation xw8600 with this specification:

  HP xw 8600
  Intel Xenon CPU E5440
  NVIDIA Quadro FX 4600
  power electric 1050 watts

  Motherboard is a socket for dual processor with two processor E5440 xenon (12 M Cache, 2.83 GHz, four hearts, 1333 MHz FSB)

  My question is:

  is the work of two processor together?  Or a job and the other spare part?

  and can I get sum of them?  Say I have: 2 * 4 core processor * 2.83 GHZ 22,64 = total?

  Thank you

  The HP QuickSpecs for the xw8600:

  

  You can see that there are faster quad hearts that the E5440, but those running with 120 or 150 watts max output each (4 cores) processor and the motherboard can detect those more power needs and want you to use the 'double height' radiators posted on this forum in the past, for each processor.

  So this processor of 80 watt is the fastest, you can officially run only big radiator/fans with the smaller accompanying these processors.

  The second processor is used... is not a spare part.  All 8 cores running simultaneously, each at the speed indicated.  Many programs can use additional drivers, so speed tests a computer running 8 cores are twice that of the computer that runs the 4 cores of the processor even speed.  For example, as previously posted here, some of my speed tests on a single versus installation double processor on the same workstation HP upped the partitions Windows 7 Windows Experience Index of 7.2 to 7.6.  Noticeable, but not a doubling.

  Unless you have obtained the xw8600 for a purchase cost best eBay to them (which you won't) I would advise to buy a used Z600.  You will get a more mature workaholic.  Regarding the Z620... my work on those who told me that HP is still perfecting things.  Right now, it's more like a race horse.  So, there are a few good reasons to fall back a generation of the Z620 if you buy used... benefit from important and bugs costs worked better.  All you get to do all the updates that are available from HP for this workstation.

• Satellite P200 1EE - this can produce to 1080 p via HDMI?

  Hello

  My first post on this forum.

  I recently bought this laptop and plugged into my LCD TV at home. However, I can't seem to get 1080 p via HDMI 1080i (my TV is able to accept 1080 p via HDMI). Anyone know if this is possible? (I've updated the latest Toshiba display drivers).

  Also watching movies, I notice a lot of grain/noise on the screen of the laptop. Is this normal or is it a defect? I was watching transformers HD DVD last night and could see lots of noise, not only during dark scenes, but generally throughout the film.

  Any help will be much appreciated.

  Thanks in advance.

  Shak.

  Hi Shak.

  It is useful that you have insured your LCD TV supports 1080 p. This resolution you must check in your graphic card driver catalyst a required option. Open the control center and find the dvi settings and uncheck the option "reduce frequenzy dvi on the screens to high-resolution. 1080 p should work now.

  The grainy/noisy thing with HD-DVD of Transformers. I don't think that it is a defect or something like that. Just put in another movie and see if the image quality is better or not. Quality differs from a movie to a movie.

  Check it out and give me a quick answer if it worked.

  Kind regards
  Joey

• I have my Toshiba computer connected to my TV via HDMI. Video works fine, but I can't get any audio.

  I have my t.v. from tom toshiba satellite connected via an hdmi cable. Internet and work video grat. I can't get the audio signal to the TV.

  Hello

  To add a bit to the excellent advice of RajithR:

  You can check with the help of Toshiba, their documentation online and ask in their forums
  on the problems known.

  How to activate Audio via HDMI
  http://www.MyToshiba.com.au/support/items/FAQ/316

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  With the help of PC Audio on HDMI
  http://www.brighthub.com/computing/hardware/articles/27727.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot get DTS/multi channel audio via HDMI

  Hello
  I'm trying to connect my VAIO SVT15112CXS to my Bravia HDTV via HDMI to get multi-channel audio (DTS/DD) from my Bravia HT (connected to the TV via optical) with no luck at all.

  I have the same setup for PS3 works well, is it cable or equipment.

  I have already updated all the drivers.

  When the TV is not connected I don't get an Audio HDMI option in the playback devices (I checked to show disconnected devices / disabled) and when it is connected I do not get an option to change the configuration of stereo speaker.

  This way I get only Stereo sound.

  I tried passthough HDMI via ffdshow config (installed K-Lite codec pack) and there is no sound in this way.

  Is there a solution? something escapes me?

  Thanks to all in advance,

  Thanks for your time and your response.

  I got it actually work! updated drivers audio and video (not Sony ones sugested, but later of Intel and Realtek) and now I have everything works as it should.

  The only minor problem is that Vaio Care now wants me to go back to the previous version of the driver, but I'll just ignore it.

  Everyone, try this if you experience this problem.

• How to get an audio output to the TV via HDMI on my satellite

  I have connected to the TV via HDMI to view downloaded content from BBC.
  How can I get the sound?

  Go to the control panel-> Sound-> playback tab
  Here you must choose a digital output as default device.

  Also check this:

  + HDMI port allows her too?
  + http://aps2.toshiba-tro.de/kb0/FAQ9401AY0001R01.htm

• Satellite P200 - 1EE, problems of HD - DVD after you connect to the TV via HDMI

  Hello

  Like many others I have read on here that I'm too have problems with playback of HD DVD.

  However the difference for me seems to be that, initially, I was able to read my DVD HD (it was the movie 300 passing) until I tried to connect the laptop to my HDTV via HDMI (it is only 720 p not 1080i). He doesn't have to play with the message "not responding". Now, the HD-DVD will not play even on the laptop.

  Any suggestions?

  I tried to use windows restore without success and also tried to download the update of the driver, as described in other posts, but the download is not completed. (also I can't find an update of the firmware on the Toshiba site)

  Any help is greatly appreciated.

  Thank you
  John

  Hello

  After watching HD-DVD on your TV you have arrested film closed HD-DVD player, back switched to LCD screen using FN + F5 key combination and then disconnected the HDMI cable?

• Toshiba 46WL768 - abandonment of the photo while streaming from a PC via HDMI

  I believe I have exactly the same problem for a year on my 46WL768 when running from a computer via HDMI.
  The problem seems to be related to the level of the input signal that happens much more often a source of the computer, but seems to be the same problem you describe clear or too dark.

  I tried all versions of firmware that I can find.
  I tried, as far as I know, all combinations of each including triggering turnng the options in each mode of TV (something still on in-House who controls this however, no matter what you do).
  I tried several computers and several graphics cards very expensive.
  I even sent listed you for repair where a number of parts, including the motherboard have been replaced (as a precaution because they could not find the same question, yet I can reproduce instantly).

  You can make it less annoying by opting for one of the default views Hollywood, but you can't, in my experience, get rid of it. Your only two options seem to be flashing constantly with a very high level of responses for actions on the screen, or it is less often stumble but have an image on the screen "lag". If you look at the Movies TV/no-act, the second option is not too bad but there not acceptable for computer use which is what I use it for.

  The problem, as I understand it, is once the bright/dark ratio of the image displayed on the screen will over/under a certain level of relaxation, the screen flashes on an another secondary display mode and the white you see is this switch.

  Maybe you should try to disable some additional features like local sponsorpark, clean scan, view auto or erase the image.
  AutoView mode automatically adjusts the picture settings based on the ambient light conditions and input signal.
  http://us.Toshiba.com/TV/research-center/technology-guides

  Also recommend that you use the PC mode in case the laptop is connected. PC mode is available in mode of RGB/PC Input / input HDMI

• HP TouchSmart 600-1265qd does not connect to Samsung LED 55 '' TV via HDMI

  HP TouchSmart 600-1265qd does not connect to Samsung LED 55 '' TV via HDMI. I have connected the same cable to your laptop and it connects, suggesting that there is a problem with the CV. The TouchSmart has a GeForce GT230 graphics controlled by the control panel NVIDIAnView. By using the system control panel and the control panel NVIDIAnView, I have not been able to locate the Samsung monitor.

  I made restarts it etc. also without success. Does anyone have a suggestion that I could follow.

  Hello

  It is a machine CTO, but have many models of the Touchsmart 600 HIMI IN port series, not OUT port so you can't connect to a TV using HDMI in order to get the picture on the TV.

  

  Kind regards.

• Satellite P300D connected via HDMI to TV - screen becames black for a second

  I have the Satellite P300D.
  But now I have a problem with the P300 HDMI port.

  I have connected to my TV via HDMI.
  The photo is here.
  Every two minutes the black screen for a seconds fue becames, then the picture comes back.
  It is very annoying when I watch a movie.

  Is there a problem with a hdmi cable or with drivers?

  Is it possible to get this working?

  Thanks for any help

  > Is there a problem with a hdmi cable or with drivers?
  Who knows?  :| I think that you will have to test it.

  You could try to reinstall the HDMI Control Manager. This driver is required for your HDMI controller.
  If the question will always be, I recommend that you test different HDMI cables.

• Sound is more output via HDMI

  Hello

  I have a desktop HP m9300t with Vista 64 Bit SP2. It has a video card Nvidia GeForce 9300 256 MB with a HDMI output (and DVI).

  I've always been able to play the video and sound through an HDMI cable connected to my TV. A few weeks ago, I ran a few updates and uninstall several programs I do not use or need. I installed the Vista SP2 and updated my nvidia driver for the last available on the nvidia website. Now, I can only video output via HDMI, but no sound.

  I have the Realtek HDMI output defined as the default device under sound-> read (and it shows like 'work'). When I test it, I can see the volume up and down bar, but there is no sound on my TV. I also tried many different programs (WMP, Winamp, Media Player classic, Firefox, but still no sound.)

  Sound works fine in my computer speakers when I put as device by default.

  I tried two different HDMI cables, which I know work because they took out his other devices.

  I've updated my audio driver for the last available.

  I installed an older video driver without success.

  I scoured the internet for hours, but nothing I can find solves my problem.

  Hello

  Check the device settings in device that receives the stream of video and audio HDMI.

  What camera brand and model has no sound via HDMI?

  What is plugged into the SPDIF Jack on the back of your PC, no matter what?

  Go to www.realtek.com and download and install the latest audio driver.

  Go to www.nvidia.com and download and install the latest video driver.

  You could also try to uncheck HDMI and check digtial output and see if that produces sounds.

  These "how-to" HP articles can also provide assistance.

  Even the latest drivers and updates may cause the problem.  I have run into a problem of sound with Realtek and had to fall back to the original audio driver supplied with the PC to get his job.  Five months later, Realtek audio driver problem fixed.  You need to maybe do this or maybe go back to the last good Windows restore point known. Of course if it does not then you would have to depend on your image less hard drive backup.

  It is also possible that your HDMI audio circuits are bad.

• DTS - HD and Dolby TrueHD audio via HDMI or S/PIDF. Is this possible with HPE-140sc?

  I have an audio DTS - HD and Dolby TrueHD via HDMI or S/PIDF of blu - ray movie? I request because the Nvidia homepage not listed this support function for gtx260 (http://www.nvidia.com/object/3d-vision-requirements.html) and the homepage of Reatek'a is the same for ALC888S (http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=28&Level=5&Conn=4&ProdID=141).  What kind of problems is if there is no support in the HPE-140sc for Dolby TrueHD or DTS - HD audio? 3D-Cinema compatible reading is necessarily I can't find reading compatible sound card 3d video. Is the cheapest solution in this case buying gtx460 if I want to get DTS - HD and Dolby TrueHD audio?

  Pether, I don't think it's possible with the GTX260.

• HP pavilion dv6 3131tx no sound via hdmi

  I met an audio problem that only started since this morning, but is very frustrating, I have my hp pavilion dv6 3131tx windows 7 Home premium, connected to my TV via hdmi, it worked perfectly until this morning where the audio stopped working through the TV, hdmi output disappeared in the sounds menu, I tried the following :

  reinstall and update the drivers audio, update display drivers and chipset drivers, try the different hdmi ports and cables (to make sure it wasn't a bad cable) as well several solutions in the forums, my problem is that the hdmi output does not appear in the menu sounds and cannot be selected as default device How can I get that back?

  Problem solved, high definition driver Amd was automatically disabled somehow he was reactivated by going to the Device Manager and the bottom right click on amd/driver high definition codec and pressing enable (note that there are 2 of them, a permit and a disabled person) also allow many of them and YAY dolby digital surround sound works again! After 2 days of hard to find an answer I did it myself >. >, but still having a problem where my ATI / AMD drivers will not be updated due to a conflict between the hp hardware and the ATI Radeon Hd 5650-. -.