U330 Ethernet does not, wireless works fine
I have an Ideapad U330, which will not get online with the help of ethernet in windows. Before ask you, no, this isn't my router. When I use a Ubuntu bootable disk, ethernet works fine and I can surf the web without problem. I reformatted and installed windows 7 x 86 (it had windows XP before and the ethernet didn't work there either), installed all the drivers and updated the BIOS, ethernet still does not then that works fine wireless. I thought it was a hardware problem, until the ethernet worked without problem under Ubuntu.
try to use the manual ip configuration instead of dhcp.
Tags: Lenovo Notebooks
Similar Questions
-
OfficeJet 6500 and USB on Windows 7 64 bit does not (wireless works fine)
Hello world.
New printer. WiFi Of my different laptops works very well. However my main system is not in wireless. Try to install via a USB port. When I plug the printer Windows 7 sees it but I can't get the drivers to install correctly to where I can use fax/scan options. I can print, but I can't do anything else. If I go to the device, the printer appears with the correct name, but says that the driver is not installed. If I try to install manually (using the disk) it barfs and says that the driver is not digitally signed.
When I run the installation of the software (I downloaded the new installation driver package Basic and full) and I get to the point he wants me to plug the printer, it starts the installation but then Windows barfs and said "no driver found" and then the HP installation fails. It's almost as if Windows 7 is blocking the device when it cannot find a driver. I tried to disable 'automatically install the drivers', but then the installation of HP does not see the printer when it is plugged.
Basically I'm going nuts and is getting ready to send this printer to Costco, get a Canon. I know the drivers of Canon works because my neighbor has the same configuration as me and his printer, installed fine. I prefer the HP (well, I did) but tired of beating my head against the wall. Anyone have any ideas?
Thank you
. / height
I figured this out. The USB driver would never install. I beat my head against the wall for days and never thought about it. However, I didn't know that I could install the drivers on my main PC with no wireless connectivity wireless. Has a cable LAN connectivity. Apparently my wireless router is smart enough (like most) to send the print queue through my local network to the wireless printer.
So I just installed the software wireless on my 64 bit WIndows 7 system and I print just as if I was of my laptops wireless.
I wanted to just update everyone because it isn't really all that clear that you do know. print even if you are wired to the wireless printer.
See you soon,.
Dave
-
HP Officejet 6500E710a-f in network - scan does not. printing works fine.
Post again - not sure it went through the first time.
My laptop MAC (10.6.8) network with my "Big Mac" (Maverick). I used to be able to scan, print, and the Big Mac could use my lap top I-tunes as well. I can print, but I can't scan or use I-tunes.
Help!
Thanks, AK (redcharvel)
Hello
problem solved - I didn't turn off the printer on and outside. DUH! I did the repair disk utility, and that did nothing. Then I plugged the lap top directly to the printer (and restarted the printer). It worked. For grins, I thought I would try the option of sharing between the two printers and that worked! Thanks for your help.
-
Satellite A665D-S5175... I loaded windows 8 preview... I was really in LOVE... Afterwards, I had to reformat back to the original "out of the box" due to windows 8 not to recognize seagate hard drive (even if the compatibility check does not list)... Since then my wireless internet works fine when on the current but will not work on battery... my battery works fine and wireless works fine on all my other wireless devices... can't help but to think it's some type option to power supply but I can't find it to save my life... Help! Toshiba wants to much $$ to ask me this? their staff... I don't HAVE a big $$$ LOL! Thanks to anyone who can shed some light on this...
Hello
Change the power setting on default battery for the wireless network adapter. Configure the wireless network adapter to use the maximum performance setting when Windows Vista or Windows 7 is configured to use the balanced power plan or the power saver Power plan. To do this, follow these steps:1. click on start2 type Power Options in the start search box, and then click Power Options in the list programs.
If you are prompted for an administrator password or a confirmation, type your password or click on continue.3. click on change settings for the plan under the management of the diet that is selected. For example, if the balance is selected, click on change settings under balanced plan.4. click on change advanced power settings.5. in the Power Options dialog box, expand wireless adapter settings, and then power saving Mode.6. in the list that appears next to a pile, click performance, and then click OK.For more information, see the link.You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point
http://support.Microsoft.com/kb/928152 -
USB ethernet does not work after update to Mac OS sierra
Hello
I use end of 2014 Macbook pro 15 "running Mac OS Sierra.
Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.
Please advise and thanks in advance.
Do you use the Thunderbolt Apple > Ethernet card?
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
https://support.Apple.com/en-us/HT201295
Subject of memory NVRAM and PRAM
https://support.Apple.com/en-us/HT204063
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
https://support.Apple.com/en-us/HT201262
-Start to recovery and repair the startup disk
OS X: on OS X Recovery - Apple Support
https://support.Apple.com/en-us/HT201314
The adapter works in recovery mode?
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
Z460, Ethernet does not work after wakes up after hibernation
Hi, I used Ideapad Z460 for nearly 3 months. I have this problem. Ethernet does not work after wakes up to the top of hibernation. I have already updated the bios to the lates version (release date: 14/02/2011) but still this problem. Someone has an idea?
Thanks for reading!
try reinstalling power management, the default settings of the bios and also try this:
Right click on my computer > manage > device management > network cards > select ethernet adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".
Restart your computer and check if it works.
-
Driver Realtek 8103e does not work under Vista (DV4T), ethernet does not work
I got a new motherboard under the vices, but now the ethernet does not (rj45). I tried several drivers of other work say but it isn't on mine.
Included are version 8/20, 9/21 and 1/24 (dates or latest codes) everything has been loaded at the front desk.
I have the icon and when the cable is unplugged shows red X, which disappears when reconnected.
Anyone have an idea when else I can do?
I can't understand how a company like HP sends a non-working back unit after repair.
If you had any driver installed for Ethernet before installing what I gave you...
Then uninstall them all and also this driver which I gave you.
Restart the system and reinstall this driver from me.
-
My computer is a Vista desktop Dell Vostra. I've upgraded to Windows 7 and did not like (a lot of my programs wouldn't run well on it) so I tried to demote him back to Vista. Now my ethernet does not work. The drivers are there, but he says won't work, code 10. How can I fix it? I can't solve the problems on the computer, because I have no network.
Hello
go to dell and get the latest drivers for vista for your machine using one, you're on to get here
Save the drivers for the flash player and then transfer them
http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen
-
problem with Boot Camp, VMware Fusion 3, ethernet does not (not driver)
Hello guys,.
I have Windows 7 Pro 64 bit installed in Boot Camp and I'm running as a virtual machine using VMware Fusion OSX 10.6.6 3.1.2.
The problem I have is that the ethernet does not work under VMware, even with VMware Tools installed. Device Manager shows no driver installed.
I googled and found a lot of suggestions to add ethernet0.virtualDEV = "e1000" to the simultaneous file, but I looked and this line is already there.
I tried reinstalling VMware, VMware Tools, the Boot Camp drivers, NIC Add/Remove VMware settings, change NAT to the deck and vice versa. Nothing works.
Any suggestions?
The CARD is an Intel PRO 1000 MT and uses the E1G6032E.sys driver that is located in the:
C:\Windows\System32\DriverStore\FileRepository\nete1g3e.inf_amd64_neutral_7f08406e40c6ede2
You will need to copy the 3 files to a temporary folder or on the desktop to be able to access it from the device for a manual installation manager.
-
Update of Firefox 4. Realize some websites does not yet work with FF4. How/where can I download the older version of FF?
^ Why post if you don't have the answer to the question?
You can get Firefox here 3.6.16.
http://www.Mozilla.com/en-us/Firefox/all-older.html -
HP Pavilion x 360: micro does not always work
Hello!
I recently had problems with my microphone, which does not always work when using Skype. What is strange, is that sometimes it works perfectly, while other times that it is impossible for the other person to hear me. There is nothing wrong with the Wi - Fi connection while... Any ideas of what could be the problem?
Hi @katarint ,
Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion 360 and problems with the microphone and Skype fading out or does not. Hereis a link to download a new version which may help to solve the issue of the gradual estrangement. Please uninstall your current version and restart your computer before installing the new version.
Here is a linkto Skype help under technical questions.
I hope this helps.
Thank you.
-
Firefox won't always minimize or resize. The upper right just vibrates. Searching through forums, I found that using f11 can help, but it does not always work. Often I have to restart.
This has happened
Don't know how many times
Is a year before, perhaps
Problem occurred during the simultaneous use 3.5.9 and 3.5.10 (now). I use Vista. Right-click menu options do not appear often. Firefox often stops responding and then crashes shortly after that starts the pulse. It is a major issue.
-
Hyperlink navigation does not always work
I decided to use a bar of hyperlink pinned for navigation on my site and it works for the first round of the navigation / click, but if I try to click on the site a second time the hyperlinks do not work. Unless - I will return to my logo which is a redirect to the home page and then they work again, but only for a round of click. Here is the link to my site. I have also attached screenshot of how I have the implementation of hyperlink.
Any ideas what is ahppening here?
http://httppitchedmediabusinesscatalystcom.BusinessCatalyst.com/index.html#home
Seems to work ok for me in mac Safari.
Often, when there is a problem with the hyperlinks does not always work, it's because there is an object that is located on the navigation. In Muse, open your page in design creation and "select all." See if there is a block of text empty big or rectangle off the coast to the right somewhere which will overlap your menu when you scroll. If so remove it or move behind the menu.
-
Microsoft Wireless Multimedia Keyboard does not completely work in Vista
I have the MS Wireless Multimedia Keyboard 1.1 installed on my PC.
I recently had a few separate issues with my computer and technology at Geek Squad did some work cleaning on my PC for best performance and to get rid of a bad program. I am running Vista SP2.
On my keyboard, there are a series of buttons on the top which opens to different folders, or programs. I had to open Excel and open Word. The others are default Media Player, email, IE 8, My Documents and my pictures. Everything worked correctly and opened the program folder / to, before cleaning. Now mail, IE 8, and Media Player buttons still work, but others did not. However if I open the Microsoft Keyboard program buttons become functional and remain so until I restart the computer. The keyboard works fine otherwise. Y at - it a boot option which can have been withdrawn inadvertently during the cleaning process, which is the cause and if so how can I have reconstitute?
Thanks for any help.
Hi BCfromKY,
To test the response of the keys on the keyboard, use the Microsoft keyboard Diagnostics (MS Key), a utility program that is included with the Microsoft IntelliType software. To use MS Key, follow these steps.
Note the MS key utility is only supplied with the version of the Microsoft IntelliType 1.1 and later versions. If you do not have Microsoft IntelliType installed, you can visit the following Microsoft Web site to install this software:
http://www.Microsoft.com/hardware/download/download.aspx?category=MK (http://www.microsoft.com/hardware/download/download.aspx?category=MK)
Start Microsoft Keyboard Diagnostics. To do this, use one of the following methods:
a. Click Start, click principally made programs, accessories and then click Run.
(b) in the Open box, type mskey and then click OK.
c. If you get no response in MS Key on your keyboard, test the keyboard on another computer. If the keyboard does not work on another computer, see the "Références" section for more information on how to contact Microsoft Supplemental parts to get a replacement.
For more information, you can consult the following article:
Troubleshoot wired keyboards that do not or only the erroneous characters category
http://support.Microsoft.com/kb/258826/en-us
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
HP compaq 6530 b ethernet does not work
I have a laptop hp compaq 6530 b. A few days ago, I installed it for the first time Windows, in particular Windows7 Ultimate 64 bit (I used Ubuntu). Since the ethernet connection installation does not work (so that wireless gives no problem) although I installed all drivers HP hp websites...
Can someone help me?
Thank you
Ciao,.
You can go back and enable this setting. I assumed that you had installed the drivers.
LAN save mode power turns off your wired ethernet card to save battery when it is not connected to an ethernet cable.
People get alarmed when they don't see the wired ethernet controller, which is listed in Device Manager when there is no cable connected, and they think their wired network adapter is defective.
When you disable the LAN power save setting, always wired ethernet controller is on and remains visible in the Device Manager if a cable is connected.
Now in regards to the pilot, you must...
It can be found on the link below. Select windows 7 x 64 driver file.
http://www.Broadcom.com/support/ethernet_nic/netxtreme_server.php
Paul
Maybe you are looking for
-
Place the Parental control over the Admin account
I use a Macbook Pro with El Capitan 11.1 2012 Today, I put Parental controls on my admin account, which resulted in the managed account. I can now use my normal administrator username / combo of password to remove it. I tried everything I found on th
-
HP all-in-one 22-3110 desktop: screen brightness control for Windows 10 while a HP 22-3110
Could not find a way to control the brightness of the display. And no there is no "cursor" in the menu display options. Please let me know how I can turn down the extreme brightness?
-
original title: corel draw X 3 need a file to upgrade to work and will not install Windows install. I am running XP Windows Installer won't install Corel Draw X 3 patch for Corel SP1 and SP2. Corel X 3 was released at the end of the 1980s, well befo
-
M1319f mfp: m1319f -! Light, not printing
Printer worked without problem before a short power failure. I tried all the steps mentioned in other posts. The printer will be turned, makes noises during the warm-up - then the! lights up and there is nothing on the screen.
-
Problems with dual monitor: VGA is out only work
I have a dual monitor card galaxy geforce gf430 who worked on Sunday night before putting the computer to sleep. When I came back Wednesday on the side of the hdmi/vga/dvi vga worked the only possible output. After having checked all the settings and