Ubuntu 10.10 - Brasero check disk

After having burned the ISO to a CD using Brasero, I go in the menu check disk. I've specified the md5sum file and then pressed, check. However, after about 30 seconds I get this message on the screen: "the verification of the integrity of the file could not be performed. You do not have permissions to use this drive. I was able to sucessfully burn a CD, but not check. Screenshot is here: link: [https://dl-web.dropbox.com/get/Public/Checking%20Error.png?w=85cb0196]

It's a laptop Toshiba Satellite A210 - 1 4 running under Ubuntu 10.10. Please let me know if you need more info.

We cannot see the screenshot without connection.

By the way: Toshiba doesn't support Linux and most likely to get Linux help is this post on various Linux forums.

Tags: Toshiba

Similar Questions

  • Satellite A660 - check disk upward on reboot

    every few months where I start or restart my laptop, the check disk starts automatically and takes all day (10 to 12 hours) to perform a disk check! worse yet, it's that I can't interrupt, this means no work that day there.

    I can't work if it is a scheduled task or when the laptop is out of battery when it is 'sleep'.

    did someone have the same problem and if so is it possible to stop what is happening?
    Thank you
    Ramin

    Looks like the hard drive is faulty. You must back up your data and create recovery disks, then test the HARD drive by using a CD bootable as Seagate Seatools for DOS.

    Replace the HARD drive if it is defective and execution of recovery, then put your data.

  • Volume D: is dirty. Check Disk Local Disk d does not solve the problem

    Whenever I start my computer under WindowsXP SP3, chkdsk runs indicating that the D: Volume is dirty.  He noted no other problems.  I tried to run check disk Local Disk d with two checked options, but it does not solve the probem.  What should I try next?

    That is right.

    First of all, let us look at the ideas of the Microsoft support engineer:

    I would never not follow the suggestion of Microsoft Engineer in method 1.  This idea makes no sense.

    The Microsoft Support Engineer method 2 does not work for you (or most people), unless you have a XP installation CD bootable authentic with the same Service Pack as your installation.  In your case, you would need a true bootable XP with SP3 installation CD and most of the people do not have such an animal.  It is therefore extremely unlikely that will help you at all - and if your file system is damaged or dirty, I of course never suggests that in the first place until your file system is straightened.

    Volumes that contain file system errors is known as "Sales". When a volume is dirty, he has known file system errors, and you must run chkdsk on the volume to repair the problem.

    When XP starts, it automatically checks the on each volume's dirty bit (C, D, E, etc.), and if any volume is dirty, XP will automatically run chkdsk/p on next reboot on the volumes in an attempt to clear the dirty bit.  Which does not clear the bit of impurity or it may take several passes.

    If the volume dirty bit, one is set, this indicates that the file system may be in an inconsistent state. The dirty bit can be set because the volume is online and has some remarkable changes, because changes have been made to the volume and the computer shutdown until the changes have been committed to disk, or because corruption has been detected on the volume. If the dirty bit is set when the computer restarts, chkdsk runs to verify the consistency of the volume.

    Whenever you start a computer that is running one of the Windows XP operating system or the Windows Server 2003 family, autochk.exe is called by the kernel for all volumes to check if the volume dirty bit is set. If the dirty bit is set, autochk performs an immediate chkdsk /f on that volume. Chkdsk /f verifies file system integrity and attempts to fix any problems with the volume.

    A simple power interruption is something that could result in a disc was marked as dirty.  Have you had a power failure these days?

    You can query the dirty bit on a volume from the command prompt window.  Here's how:

    Click Start, run and enter in the box:

    cmd

    Click OK to open the command prompt window.

    For example, to query the bit of impurity on drive D, type:

    fsutil dirty query D:

    The sample output:
    Volume D: is dirty
    Volume D: is not dirty

    Type "exit" to close the command prompt window.

    You can not enter any command to clear the dirty bit - only chkdsk /r or chkdsk/p can clear the dirty bit.

    When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you decide to schedule the chkdsk with error correction during the next reboot, the results appear in the viewing Application event log.  You should look there for the chkdsk log to see what happened and no problems after running chkdsk.

    To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

    A shortcut to the event viewer is to click on start, run and enter in the box:

    %SystemRoot%\system32\eventvwr.msc

    Click OK to launch the event viewer.

    Search the Application log for an event originally by Winlogon, something like:

    Event type: Information
    Event source: Winlogon
    Event category: no
    Event ID: 1001
    Date: 04/08/2010
    Time: 11:25:57
    Description:
    Checking file system on C:

    The type of the file system is NTFS.

    One of your disks needs to be checked for consistency. You
    may cancel the disk check, but it is strongly recommended
    that you continue.

    Windows will now check the disk.

    Cleaning of minor inconsistencies on the drive.
    CHKDSK checks Usn Journal...
    Audit of the USN Journal is complete.

    39070048 KB total disk space.
    28017948 KB in 100571 files.
    56540 Ko 10556 index.
    0 KB in bad sectors.
    236440 KB in use by the system.
    65536 KB occupied by the log file.
    10759120 KB available on disk.

    4 096 bytes in each allocation unit.
    9767512 total allocation on the drive units.
    2689780 allocation units available on disk.

    Windows has finished checking your disk.
    Please wait while your computer restarts.

    The dirty bit fade not until chkdsk /r (or chkdsk/p) tracks clean when the system reboots (as in the example) or when you run chkdsk /r from the XP Recovery Console.

    Many times, the best remedy is to just run chkdsk /r from the XP Recovery Console so you can actually see what it does.  Sometimes, this also seems to be the only way to clear the dirty bit and this way you can see what he does.

    Note that you can not also question the bit of impurity of the Recovery Console and you can't turn off the bit of impurity to enter any command.

    If for some reason chkdsk will not erase the dirty, you can simply say XP never check the volume dirty bit, but who will not fix your fault of potentially hard drive, or it could be the drive just need to have chkdsk run on that (sometimes you need to run it more than once) or you will have to think about replacing the drive.

    If you have a genuine XP bootable installation CD, you can boot into XP from that (even a SP2) Recovery Console CD will work and run chkdsk /r manually from there and repeat until chkdsk /r is clean.

    If you have a genuine XP bootable installation CD, say so and I'll post instructions so you can make a CD of XP Recovery Console and how to run chkdsk from there.   There is no required XP media.

    I wonder why it is that I have never see an engineer Microsoft Support post instructions on how to make a bootable CD of XP (no XP media required) Recovery Console... probably because there is no KB article for them to post.

  • I tried to run Check Disk and get an error message on the completion of the phase 2

    I tried to run Check Disk and get an error message on the completion of the phase 2. If I try to run a defrag without having completed verification of the disc it comes up with error message Disk Defragmenter has detected Chkdsk is scheduled to run on the Volume: c. Please run f / dskchk. I tried to run it and nothing seems to happen. I checked that I have no other programs running and she thinks that this is the case.

    * original title - I check disk / defrag problems *.

    Kevin.

    How old is the hard drive? It is still under warranty? The easiest way forward is to replace the drive.

  • event/application of display screen shows 'Warning' to an entry (after "check disk"), how do I do now?

    Hello-

    After the race "check disk", I went to the visualization/event application screen.  I had a 'warning' / / source, windows search service / / category, Gatherer / / event, 3086. "When I clicked on it, I arrived at the EVENTS AND ERRORS MESSAGE CENTER.  I did a search for 3086, refined by XP pro.  She did an article; When I clicked the link to this article, I came to http://support.microsoft.com/kb/931760 (I show the title only because the article is very long) - you can not install Windows XP successfully after you use Windows Vista or Windows PE 2.0 to create partitions on a hard drive on the article has something to do with the creation of partitions , which i know I never did.  more I never had vista installed, and I did not know "windows preinstallation environment 2.0" is.
     
    My Qs-

    (1) this article is applicable to me?  There a fix which are related, but he also says not to apply the fix, I'm not exactly the article describes the problem.  I don't think that I do, but I'm not positive that I even understand what the problem right is described in article.

    (2) am, supposed to do something as a result of the original 'WARNING' from the screen of application of visualization/event and if so, what?

    (3) am I supposed to bring some type of change some setting somewhere, and if so, what change, how and where?

    (4) am I hopelessly paralyzed my computer, and if so, how can I solve this?

    (5) I even asked the Qs right?

    Thank you very much to all those who can help you!

    -susie margaret

    Hello susie margaret

    No, I wouldn't use this hotfix.

    1. Why did you decide to run the check disk in the first place?

    2. is your partitioned hard drive?  You have more than one listed partiton for example in workstation?

    3. the machine works well?

    .

  • Check disk freezes on stage 5? HARD disk errors?

    Hello

    I am sure that my HARD drive has errors on this subject and needs a good Defrag.

    When you perform a check disk with bad sectors recovery option, it always freezes just after starting step 5.

    Without the check be able to complete the errors that I don't think are cannot be fixed properly.

    How can I get it to end?

    Thank you

    Try running a HDD diagnostic of the manufacturer of the drive, then Windows is running.  Most hard disk manufacturers have utility software that can boot from the CD, DVD or USB and HDD test while Windows is not running.  This software may be able to find and fix the problems - but if the problem is severe enough, then it will do no good. But it certainly won't hurt to try.

  • Computer runs continuously check disk and automatically goes into power saving mode.

    2 days ago my computer was working fine, then yesterday he wanted to run the check disk at startup upward. Finished, he found no errors and proceeded to vista loading which then stated that he was going to power saving mode, the screen went black and clear screen turned yellow. Now he wants to run the check disk on every restart and ends with her past in power saving mode. I've only got 1 successful start since this all started. I tried to start in safe mode but it freezes. I also tried to boot to the last known configuration but that only prompted an another disk check and ended just as vain as other attempts. The hard drive is only a year so it should not be failing already. I don't know what I should try. Any help would be greatly appreciated. Thank you!

    Hello

    1. have you made changes on the computer recently?

    2. What is the brand and model of the computer?

    Method 1.

    Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.

    The correct way to disable CHKDSK to start use the on command chkntfs /x switch in command prompt. The /x switch will exclude a verification by default startup car. If you have drive C: as your hard drive, then the command to disable chkdsk C: drive analysis would be:

    chkntfs /x c:

    If you have 2 drives C and D, you can disable chkdsk with the command below

    chkntfs /x c: d:

    So go ahead and restart.

     

    Method 2. 

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    Here are the steps to disable checkdisk at startup.

    1 - click on the 'Start' menu of Windows on the desktop and click on "Search" (Windows Vista or 7).

    2. Type "regedit" in the search box and press 'Enter' to start recording.

    3 - Click on '+' in the folder 'HKEY_LOCAL_MACHINE' to develop. Click on the 'SYSTEM' folder and click on the folder "CurrentControlSet". Click on the 'Control' folder and then click on the "Session Manager" folder.

    4 double click on 'BootExecute' on the right pane. You should see the default value of the key defined as autocheck autochk * (with asterisk). The asterisk (*) means that the Windows controls every drive for consistency. Add "/ K:C" at the end of the autocheck autochk * after the addition, the final value should look like this: autocheck autochk / k: C *.

    5 - Click on "file" and click "Exit" to close the damper. Restart your computer. The disk check is no longer lance to the computer startup.

    Method 3.

    After the checkdisk has been disabled, I suggest you to reset the power to the control panel settings and check if that helps.

    Solve power problems: http://Windows.Microsoft.com/en-za/Windows-Vista/troubleshoot-power-problems

    Change, create, or delete a power plan (scheme): http://windows.microsoft.com/en-us/windows-vista/Change-create-or-delete-a-power-plan-scheme

    I hope this helps.

  • How often should I run check disk in windows vista edition Home premium?

    How often should I run check disk in windows vista edition Home premium? Part of a regular maintenance schedule disk check?

    How often should I run check disk in windows vista edition Home premium? Part of a regular maintenance schedule disk check?

    There is no reason to run it on a regular basis. Run only when you have reason to suspect a problem.

  • When I try to use automatic dates, I get code 8007005. I ran the check disk and there is no problem here.

    When I try to use automatic dates, I get code 8007005. I ran the check disk and there is no problem here.

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

     

    or please repost your question in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • Messages of error and check disk every time I start my laptop

    When I start my phone first, I get an error message saying: "error loading C:\Users\Mandy\ntuser.dll". -What this means and how do I fix it? He also runs a scan whenever I start it by saying that one of the drives may have been damaged, and then it is said that it is correct.

    Hello

    1 during how long have you had the problem?
    2. don't you make changes to your computer before the problem?
    3. don't you want to disable check disk at startup?

    I suggest that you follow these steps and check if the problem persists.

    Step 1:

    Test the issue in safe mode.

    Step 2:

    If the problem does not occur in safe mode, I have you perform the clean boot in order to check if the problem is caused by a third-party program conflict.

    Note: Follow step 7 to your computer as usual.

    Step 3:

    This could also be a virus, run a full scan using your security software or by using the Microsoft Safety Scannerscanner.

    Step 4:

    You want to disable the disk check at the beginning upward, follow the steps in this link.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/how-to-disable-the-Chkdsk-check-disk-on-start-up/35f58c69-7a6c-4e1b-AEC3-26d7131ec643

  • Check check disk results in Win Vista

    How can I run chkntfs c: Vista? I try it on the command line, but it does not say that if the volume is clean or dirty, it gives me just another command prompt line. He always gave me a response in XP.

    Hello

    Here is the information available in method 3 linked below

    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  • Will be Check Disk wipe-out the restore points?

    Vista SP2 on and HP m8000

    If I run the disk check is it existing of smoothing on restore points?

    Thank you

    M.

    Hello

    No, unless there's something wrong with the part the drive on which the Restore Points are
    writing the. He would remove them is possible but unlikely. If you want to see
    If drive a mistake yet not be repaired then run CheckDisk (chkdsk) and
    do not check the option FIX or RECOVER. Checkdisk will then tell you if there
    all errors and where they are. Then, if necessary, and there are errors, you can run
    CheckDisk again with the FIX (/ f) and necessary RECOVERY options (/ r).

    To simply check the drive without affecting it uncheck the boxes here displayed in method 1
    #8 and then no data will be affected if there are any errors found.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ======================================================

    CheckDisk will show its results with a report on the screen but if you wanted to
    read the newspaper subsequently use these methods.

    CHKDSK (short for Checkdisk)-<-- see="" the="" vista="" log="">
    http://en.Wikipedia.org/wiki/chkdsk

    Journal of checkdisk is EventViewer which is easy to read with MyEventViewer utility.

    Look in the Event Viewer to see the newspaper.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    Control Panel - Classic view - administrative tools - event - left panel - Windows logs Viewer - under the
    above - click on request - in the middle column, scroll down the list that indicates the Source - click Wininit.
    good Panel - Wininit event - click on the event properties - new window will open with the journal you want.
    Scroll as needed. Event ID is 1001.

    ---------------------------------------------------------------------------------

    If you clear the log before you checkdisk annex, it is easier to find but by time and Date
    should be easy enough.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Ran "Check Disk". Windows unbootable.

    I received a newsletter from AOL, which suggests that I run 'Check Disk' to improve the speed of my computer (Dell Inspiron 531 that running Vista Home Premium 32 bit). The program ran through all five steps without problem. Once completed, the computer went to black screen. When I start the computer, I get the logo Dell, microsoft Corp. loading defiler, then it will fail to start Windows. At this point, it goes to a black screen with only the visible mobile mouse cursor. I tried to restart and tried to insert the Vista installation disc that came with my Dell and "Computer repair" running, without result. At the start of attempt a "Startup Repair" appeared indicating that it may restart the computer several times to correct the problem. He ran once rebooted to black screen and I didn't know (or raised) since then.

    Hello

    You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
    The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
    Right click on the device and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you do not have the disks
    the manufacturer of your system will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (to do the system restore
    It only needs to be bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
    (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
    3.

    You can use another DVD that aren't copy protected but you you need to own
    Product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
    or "BOLD"
    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Check Disk station

    I have windows vista. Whenever I boot, windows attempts to run the disk check. I tried what allows him to repeat three times and received the report that there are no errors. Is there a way to prevent the 'scheduled' check the disk?

    Hello

    Disable or stop Auto CHKDSK during Windows startup - scroll to it.
    http://rahuldpatel.WordPress.com/2008/11/22/

    How can I stop CHKDSK from running each time my PC?
    http://www.OCModShop.com/OCModShop.aspx?a=874

    How to run check disk at startup in Vista - check methods 3 and 4
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    Video: Stop Check Disk from constantly running at startup in Windows Vista
    http://blogs.TechRepublic.com.com/itdojo/?p=193

    ChkDsk runs every time Windows starts.
    http://www.WinVistaClub.com/T20.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Is it normal to find errors when running Check Disk manually with Vista?

    For some time my computer would not start without automatically run the disk check. It now starts and works well, but Check Disk find errors every time I have manually run the disk check. Is it normal to find some cluster errors when you run Check Disk? It runs today, he finds and replaced two bad clusters. Two is not much, but I ran as a few days ago. Thanks for any information, that everyone has.

    It would be wise now to test the hard drive. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

    http://www.ImgBurn.com

    http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
    http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

    Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it. MS - MVP - Elephant Boy computers - don't panic!

Maybe you are looking for

  • I lost my button send and can't find it in one of the solutions, please help

    My Send button was there last night and worked well, but I can't find them anywhere now. I tried a draft and he changed his edit, but still not good.

  • New IPhone SE does not sync for Macbook Pro

    My new that i Phone SE will not aync to my Macbook Pro.  The States of error message that my phone can't synchronize on i tunes because it requires a new version of custom i.  Currently, I have version 12.2.2 and tried to update, but the Mac says tha

  • Automatic addition of new songs to playlist?

    Hello is it possible to add new songs from a specific playlist automatically when the song is imported to iTunes? Otherwise, I will add all my new songs to the playlist on mine. I don't know how to do it may with Apple Script or Automator? Thank you

  • ICS STABLE PRE-RELEASE

    Hi I am interested in pre release software for photon 4G and saved my camera too. When I'm likely to have counted on the preliminary software download?

  • Strange SD card volume / mount point name

    1. open contacts > modify a contact 2. change the contact photo 3. choose the photo Album 4 settings > enable advanced (default active) display devices I see the strange name of volume for the SD card... M ^ IPNG ^ M ^ J ^ Z ^ J in my case.  Please r