UDP protocol? IPv4?

Similar Questions

• UDP protocol

  I have ver8.6 UDP commo protocol that works, but when upgraded to LabView2009, he mistakes. It mistakes in the basic vi UDP open. My only job around is to uninstall 2009, moaning.

  Hi Ronrodrig

  The conversion of the VI in 2009 seems to be the problem. I had 1 error when I ran your VI, it worked only if the net address was my local address. I have rebuilt your VI from scratch in 2009 and I had no errors. I did not see that it comes to LabVIEW 2009 known issues. There is a patch of 2009, but I have not installed to see if that fixes it. Unless perhaps I missed something

  J

• Localhost UDP connection between FCR and Matlab

  Hi all

  I have a question about the connection between Matlab and FCR UDP. My idea is to Exchange data between Matlab and Labview on the same computer.

  So I found the 'UDP Simple' of the FCR 2.0 sample project where periodically a datasample is generated randomly and sent to the remoteport 61557 local host. In the project a 'fractional number of string for transmission' is used for the transmission of data. The receiver of the sample project reads from the same port to receive the datasample.

  Now, I'm interested to read this simple stream from Matlab (just at first), however, it does not work and I'm not sure why. What I do in Matlab is the following (code Matlab)

  delete variables;
  u = udp ('127.0.0.1', 61557); % Of installation UDP Object
  fopen (u); open reading port %
  A = fread (u, 1);  % read an element
  fclose (u);

  With this code, however, I get a timeout by saying: "' WARNING: unsuccessful reading: the amount of data specified has not been returned within the time limit." "

  I'm not sure why this happens, maybe you could help me out here? I guess that the formet serving to VCF is not the same as in Matlab? Maybe the Terminators are not the same?

  See you soon,.

  Steve0

  Hey

  So, regarding the problem actually, I found the solution today. It was not the firewall, but a simple configuration in Matlab seting the UDP port. So the side of Matlab, to change the definition of udp object according to

  u = udp ('127.0.0.1', 'Thelocalport', 61557);

  If you have

  u = udp ('127.0.0.1', 'Thelocalport', 61557);
  fopen (u);

  A = fread (u)

  fclose (u);
  Delete (u);

  Who does the trick and you can read from the port. Then of course you say Matlab that you read from the "LocalPort" x, which I wasn't aware of.

  On the transmitter side, you simply:

  u = udp ('127.0.0.1', 61557);

  fopen (u);

  fwrite (u, '1');

  fclose (u);
  Delete (u);

  Here, you set just the port of transmiting.

  About the format of the data: I used the simple UDP protocol streaming Comms project where a random number is generated as a double, transformed into a string (ASCII values) and transmitted. At the level of the receiver, you get as much the UDP packet with the ASCII values that you must turn if you want to find the number.

  I hope this helps anyone having the same problem.

  See you soon

• Convert data from text file to display for hex UDP transmission controls

  Hello

  I'm reading packets ethernet from a text file containing the actual hex data packets to then send these accurate return through a writing UDP hex data. I can't understand how to feed data into the function of writing UDP as real rather than characters ASCII hex data, as it does by default. I had the screen on the last VI before the writing of the UDP to "hexadecimal display mode" and if I manually type the hexadecimal values in the VI (hexadecimal string to binary String.vi - attached), then it passes the commands correctly. However,... when I fed the string of text in my text file data in this VI, it seems to be the substitution of this hexadecimal display on the VI input mode and the resulting entry in my UDP is still ASCII character mode. I tried to use a cast inside this VI, type... but that doesn't seem to work right. I have attached the main VI and VI which tries to prepare data before reading the UDP protocol. I've also attached an example of text file of data that I am an attempt of analysis.

  Any help would be appreciated,

  Thank you

  Hi jsrocket,

  the attached example should work as a transformation.

  Mike

• UDP communication with microcontroller

  Hello

  I need to access a controller for some engines. The controller can be accesed by Ethernet. Unfortunately, I know very little such communications.

  So I worked by the UDP-examples of LabView provides. That helped a lot, however, some questions remain:

  What I don't understand is how I'm supposed to open a connection to the controller. In all the examples of LabView you still need to enter the Port number on the server and the ability to use vi. However with the microcontroller, I can't just enter a port number. I guess, that the microcontrroller already has some kind of a port and is similarly to the reciver.vi in the examples, but how can I find the port number or manipulate?

  I found documentation for the microcontroller. It is said that all commands to the microcontroller and the answers will be to send UDP-protocoll text encoded in UTF - 8. The orders correctly decoded will be responded with a package "ACK"and return to the "Commander".»

  The commands are the following:

  overall. Exit = ends the server

  overall. Socket = opens UDP-socket

  overall. IsConnected = responds with 0 or 1, if the port can be used

  global.getPort = returns the port number where the server is listening

  There are more of course. Some for setting up a gerneral I/O-Port and a lot more to move the motors of course. However, I think that the above is those that I need to open a connection.

  Of course, there are child of all that I need. I don't know how to use it. How is it I am destined to one of these commands sent to the controller without having a connection already?

  Do I have to sort of send orders 'everywhere', hope that this device is the only one who responds, ask for its port and then open a connection?

  I am really lost!

  Thanks for your help already!

  Hello

  Thank you very much to all those who helped.

  I managed to make it work, writing type of an own port scanner. The controller has been programmed to send a response to every shipment of order, I wrote a UDP server in LabView that would send a command to the controller that he had to answer. In the 'open UDP', I specified the IP address of my computer's ethernet card, which was connected to the microcontroller only via the crossover cable.

  The server sends the command to an unspecified IP (xFFFFFFFF). First of all to channel 1, then 2-port, etc... and waited for a response. In this way, that I have to know the IP address.

  In the end, the Port number is (of course) 1234.

  Thanks again for your time and all your ideas!

  Greetings

• Regarding UDP Rx. custom map FPGA for PC

  Dear Sir.

  We are not able to receive the data in LabVIEW which is captured in WireShark. We pass the FPGA card data to PC. Here we use the UDP protocol.

  We follow the procedure below to send and receive data :

  1. Side map FPGA:
     1. We get the PC ARP request.
     2. Then, we give the answer ARP for PC.
     3. Then, we receive a PC UDP packet.
     4. After that, we send a UDP packet to PC.

  We monitor all frames with WireShark Analyzer.

  Let me know the solution and fill in the gap.

  Thank you best regards &,.

  Chick S

  The only thing I see is I think you mixed up of your ports. Looking at your OCAP paper, it seems that the FPGA (10.1.8.121) sends to the destination port 1234, but your VI of receiver UDP listening on port 1200. However, if you change the receiver port on the VI of UDP Rx, you get an error: I don't know if you will be allowed to open the same port twice (once in the TX, once in the RX). If this is the case, you must move the two functions in the same VI so that they use the same refnum UDP.

• WAG320N - automatically opens and close a UDP port (3658)

  Hello

  I noticed that in my router as the router EOP journal a port automatically without human intervention, and after a few router time closes the port.

  Here is the log file from my router which opens the port and closes after a couple of hours.

  LOG------------------------------

  Tue, 2010-02-09 10:02:16 - AddPortMapping: NULL: 3658 external to the UDP Protocol 10.1.1.253:3658 for: 10.1.1.253:3658 to 3658 (UDP) with timeout:0
  Tue, 2010-02-09 10:02:16 - no authorization rule corresponding: accept the default (n_perms = 0)
  Tue, 2010-02-09 10:02:16 - redirect port 3658 UDP protocol 10.1.1.253:3658 for: 10.1.1.253:3658 to 3658 (UDP)
  Tue, 2010-02-09 10:02:16 - creating pass rule UDP Protocol 10.1.1.253:3658 for: 10.1.1.253:3658 to 3658 (UDP)

  .....

  Tue, 2010-02-09 12:52:59 - DeletePortMapping: external port: 3658, Protocol: UDP
  Tue, 2010-02-09 12:52:59 - deleting the port UDP 3658 forwarding rule
  Tue, 2010-02-09 12:52:59 - trying to delete rules at index 0

  ----------------------------------------------------------------------------------

  Why is this happening?

  Yes. Exactly. Your PS3 will open this port via UPnP.

• How to stop srw/EMS shipment 239.255.255.250.1900: UDP

  SRW / EMS switches are sending packages as below:

  IP 172.16.57.100.1900 > 239.255.255.250.1900: UDP, length 296
  IP 172.16.57.100.1900 > 239.255.255.250.1900: UDP, length 313

  (a message from discovery to the multicast address 239.255.255.250 port 1900 via the UDP protocol)

  This behavior can be disabled?

  It seems that this is for uPnP.

  This is normally come from a windows machine, you're sure it's the switch?

  For the switch, here's a guide to the administrator:

  http://www.Cisco.com/en/us/docs/switches/LAN/CSBMs/srw248g4p/Administration/Guide/SRW224G4P-248G4P_User_Guide.PDF

  Here is the specific platform, however you need basically disable upnp if it's an inconvenience for you.  It is harmless for the switch to send however if you just want to ignore it.

  HTH,

  Andrew Lissitz

• VCS IPv4/IPv6 interoperability

  Hello everyone,

  I'm challenged to a customer who is deployed IPv6 for video with VCS control do IPv6/IPv4 Interworking. I need to validate the design to ensure that interoperability is as provided by the network of the customer team.

  As I understand it (at least for SIP-H323) interoperability is the closest VCS of the EP that should the interoperability that supports interoperability.

  So in any design with VCS supporting protocols IPv4 and IPv6 interoperability could occur on any VCS according to the direction of the call.

  This is very critical to my client: he still wants the same VCS do interoperability.

  I enclose the deployed infrastructure and I would like to be sure how the media is routed when IPv4 to IPv6 interoperability.

  The idea of the client is to get an environment

  -Zone 1: IPv6 only where VCS and video systems only communicate over IPv6

  -Zone 2: IPv4 and IPv6 where VCS manages video systems IPv6 or IPv4

  -Neighbour Zone between Zone 1 and Zone 2 in IPv6 only

  Design seeks ONLY to VCS who manages the Protocol IPv6 and IPv4 interworking and no interoperability at all on the CV in area 1 IPv6 only. It is matter of bandwidth that VCS in Zone 1 is limited to media routing would be beyond the network.

  In the VCS, I have not found how to disable IPv4-IPv6 interoperability, as this can be done for the interoperability of SIP-H323 (there is a menu for this), so I hope I can cope with such a design. The idea is to force interoperability on VCS in Zone 2 ONLY.

  I take any suggestion of design or configuration of the VCS that guarantees interoperability only on the CV in Zone 2 comes the call from the Zone 1 or Zone 2.

  Thank you for any answer you could provide on any point of this topic, especially if I am wrong on the understanding of the works of interoperability or configuration on VCS.

  Kind regards

  Cécile

  IPv4 - IPv6 interoperability would only happen on a device with IPv4 and IPv6 available-active, then in your diagram, it would be on the VCS in your joint zone (Zone 2), not in IPv6 only area, so it should work as you are eager to.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• UDP is blocked...

  There is no work around?

  We have developers on various networks of flaky and this causes some hiccups RTMFP development...

  With our thanks!

  RTMFP is a UDP protocol only.  in general, if UDP is blocked, RTMFP will not work.

  Flash Player can talk to/via a UDP - UDP proxy running pre - RFC draft 8 of the TOUR:

  https://Tools.ietf.org/html/draft-ietf-behave-turn-08

  You can configure Flash Player to use a proxy in mms.cfg (the location varies depending on your platform).  the property in this file is RTMFPTURNProxy =.

• No internet access through VPN

  Hi, I have the router Cisco 881 (MPC8300) with c880data-universalk9 - mz.153 - 3.M4.bin when users establish a VPN connection to the corporate network, had access to all the resources but no internet access, please help me what else I need to configure to achieve my goal. I don't want to split the tunnel, internet via VPN, users must have. In my opinion, I have put an additional configuration for NAT, but my router not recognize u-Turn and NAT commands on the object on the network.

  My config:

  Building configuration...

  Current configuration: 13562 bytes
  !
  ! Last configuration change at 09:52:38 PCTime Saturday, May 16, 2015, by admin
  version 15.3
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  XXX host name
  !
  boot-start-marker
  start the flash system: c880data-universalk9 - mz.153 - 3.M4.bin
  boot-end-marker
  !
  !
  logging buffered 51200 warnings
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authentication login ciscocp_vpn_xauth_ml_2 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  AAA authorization ciscocp_vpn_group_ml_2 LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  iomem 10 memory size
  clock timezone PCTime 1 0
  PCTime of summer time clock day March 30, 2003 02:00 October 26, 2003 03:00
  !
  Crypto pki trustpoint TP-self-signed-1751279470
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1751279470
  revocation checking no
  rsakeypair TP-self-signed-1751279470
  !
  !
  TP-self-signed-1751279470 crypto pki certificate chain
  certificate self-signed 01
  XXXX
  !
  !
  Protocol-IP port-map user - 2 tcp 8443 port
  user-Protocol IP port-map - 1 tcp 3389 port
  !

  !
  !
  !
  IP domain name dmn.local
  8.8.8.8 IP name-server
  IP-server names 8.8.4.4
  IP cef
  No ipv6 cef
  !
  !
  license udi pid CISCO881-K9 sn FCZ174992C8
  !
  !
  username privilege 15 secret 5 xxxx xxxx
  username secret VPNUSER 5 xxxx
  !
  !
  !
  !
  !
  !
  type of class-card inspect sdm-nat-user-protocol--2-1 correspondence
  game group-access 105
  corresponds to the user-Protocol - 2
  type of class-card inspect entire game SDM_AH
  match the name of group-access SDM_AH
  type of class-card inspect entire game PAC-skinny-inspect
  Skinny Protocol game
  type of class-card inspect entire game SDM_IP
  match the name of group-access SDM_IP
  type of class-card inspect entire game PAC-h323nxg-inspect
  match Protocol h323-nxg
  type of class-card inspect entire game PAC-cls-icmp-access
  match icmp Protocol
  tcp protocol match
  udp Protocol game
  type of class-card inspect entire game PAC-h225ras-inspect
  match Protocol h225ras
  type of class-card inspect entire game SDM_ESP
  match the name of group-access SDM_ESP
  type of class-card inspect entire game PAC-h323annexe-inspect
  match Protocol h323-annex
  type of class-card inspect entire game PAC-cls-insp-traffic
  match Protocol pptp
  dns protocol game
  ftp protocol game
  https protocol game
  match icmp Protocol
  match the imap Protocol
  pop3 Protocol game
  netshow Protocol game
  Protocol shell game
  match Protocol realmedia
  match rtsp Protocol
  smtp Protocol game
  sql-net Protocol game
  streamworks Protocol game
  tftp Protocol game
  vdolive Protocol game
  tcp protocol match
  udp Protocol game
  type of class-card inspect the correspondence SDM_GRE
  match the name of group-access SDM_GRE
  type of class-card inspect entire game PAC-h323-inspect
  h323 Protocol game
  type of class-card inspect correspondence ccp-invalid-src
  game group-access 103
  type of class-card inspect entire game PAC-sip-inspect
  sip protocol game
  type of class-card inspect correspondence sdm-nat-https-1
  game group-access 104
  https protocol game
  type of class-card inspect all match mysql
  match the mysql Protocol
  type of class-card inspect correspondence ccp-Protocol-http
  http protocol game
  type of class-card inspect entire game CCP_PPTP
  corresponds to the SDM_GRE class-map
  inspect the class-map match PAC-insp-traffic type
  corresponds to the class-map PAC-cls-insp-traffic
  type of class-card inspect entire game SDM_EASY_VPN_SERVER_TRAFFIC
  match Protocol isakmp
  match Protocol ipsec-msft
  corresponds to the SDM_AH class-map
  corresponds to the SDM_ESP class-map
  type of class-card inspect correspondence ccp-icmp-access
  corresponds to the class-ccp-cls-icmp-access card
  type of class-card inspect the correspondence SDM_EASY_VPN_SERVER_PT
  corresponds to the SDM_EASY_VPN_SERVER_TRAFFIC class-map
  !
  type of policy-map inspect PCB - inspect
  class type inspect PCB-invalid-src
  Drop newspaper
  class type inspect mysql
  inspect
  class type inspect PCB-Protocol-http
  inspect
  class type inspect PCB-insp-traffic
  inspect
  class type inspect PCB-sip-inspect
  inspect
  class type inspect PCB-h323-inspect
  inspect
  class type inspect ccp-h323annexe-inspect
  inspect
  class type inspect ccp-h225ras-inspect
  inspect
  class type inspect ccp-h323nxg-inspect
  inspect
  class type inspect PCB-skinny-inspect
  inspect
  class class by default
  drop
  type of policy-card inspect sdm-license-ip
  class type inspect SDM_IP
  Pass
  class class by default
  Drop newspaper
  type of policy-card inspect sdm-pol-NATOutsideToInside-1
  class type inspect sdm-nat-https-1
  inspect
  class type inspect sdm-nat-user-protocol--2-1
  inspect
  class type inspect CCP_PPTP
  Pass
  class class by default
  Drop newspaper
  type of policy-card inspect PCB-enabled
  class type inspect SDM_EASY_VPN_SERVER_PT
  Pass
  class class by default
  drop
  type of policy-card inspect PCB-permits-icmpreply
  class type inspect PCB-icmp-access
  inspect
  class class by default
  Pass
  !
  safety zone-to-zone
  security of the area outside the area
  ezvpn-safe area of zone
  zone-pair security PAC-zp-self-out source destination outside zone auto
  type of service-strategy inspect PCB-permits-icmpreply
  zone-pair security PAC-zp-in-out source in the area of destination outside the area
  type of service-strategy inspect PCB - inspect
  source of PAC-zp-out-auto security area outside zone destination auto pair
  type of service-strategy inspect PCB-enabled
  sdm-zp-NATOutsideToInside-1 zone-pair security source outside the area of destination in the area
  type of service-strategy inspect sdm-pol-NATOutsideToInside-1
  in the destination box source sdm-zp-in-ezvpn1 ezvpn-pairs area security
  type of service-strategy inspect sdm-license-ip
  source of sdm-zp-out-ezpn1 of security area outside zone ezvpn-zone time pair of destination
  type of service-strategy inspect sdm-license-ip
  safety zone-pair sdm-zp-ezvpn-out1-source ezvpn-zone of destination outside the area
  type of service-strategy inspect sdm-license-ip
  safety zone-pair source sdm-zp-ezvpn-in1 ezvpn-area destination in the area
  type of service-strategy inspect sdm-license-ip
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  BA aes 256
  preshared authentication
  Group 2
  !
  Configuration group customer crypto isakmp Domena
  key XXXXXX
  DNS 192.168.1.2
  Dmn.local field
  pool SDM_POOL_1
  Save-password
  Max-users 90
  netmask 255.255.255.0
  banner ^ Cwelcome ^ C
  ISAKMP crypto ciscocp-ike-profile-1 profile
  match of group identity Domena
  client authentication list ciscocp_vpn_xauth_ml_2
  ISAKMP authorization list ciscocp_vpn_group_ml_2
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac ESP_AES-256_SHA
  tunnel mode
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-ESP_AES-256_SHA
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  !
  interface Loopback0
  IP 192.168.9.1 255.255.255.0
  !
  interface FastEthernet0
  no ip address
  !
  interface FastEthernet1
  no ip address
  !
  interface FastEthernet2
  no ip address
  !
  interface FastEthernet3
  no ip address
  !
  interface FastEthernet4
  Description $ETH - WAN$ $FW_OUTSIDE$
  IP x.x.x.x 255.255.255.248
  NAT outside IP
  IP virtual-reassembly in
  outside the area of security of Member's area
  automatic duplex
  automatic speed
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered Loopback0
  ezvpn-safe area of Member's area
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  interface Vlan1
  Description $ETH_LAN$ $FW_INSIDE$
  IP 192.168.1.1 255.255.255.0
  IP access-group 100 to
  IP nat inside
  IP virtual-reassembly in
  Security members in the box area
  IP tcp adjust-mss 1452
  !
  local IP SDM_POOL_1 192.168.10.10 pool 192.168.10.100
  IP forward-Protocol ND
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  The dns server IP
  IP nat inside source list 3 interface FastEthernet4 overload
  IP nat inside source static tcp 192.168.1.3 interface FastEthernet4 443 443
  IP nat inside source static tcp 192.168.1.2 8443 interface FastEthernet4 8443
  IP route 0.0.0.0 0.0.0.0 X.x.x.x
  !
  SDM_AH extended IP access list
  Note the category CCP_ACL = 1
  allow a whole ahp
  SDM_ESP extended IP access list
  Note the category CCP_ACL = 1
  allow an esp
  SDM_GRE extended IP access list
  Note the category CCP_ACL = 1
  allow a gre
  SDM_IP extended IP access list
  Note the category CCP_ACL = 1
  allow an ip
  !
  not run cdp
  !
  Note access-list 3 INSIDE_IF = Vlan1
  Note CCP_ACL category in the list to access 3 = 2
  access-list 3 Let 192.168.1.0 0.0.0.255
  Note access-list 23 category CCP_ACL = 17
  access-list 23 permit 192.168.1.0 0.0.0.255
  access-list 23 allow 10.10.10.0 0.0.0.7
  Note access-list 100 Auto generated by SDM management access feature
  Note access-list 100 category CCP_ACL = 1
  access-list 100 permit tcp 192.168.1.0 0.0.0.255 host 192.168.1.1 eq 22
  access-list 100 permit tcp 192.168.1.0 0.0.0.255 host 192.168.1.1 eq www
  access-list 100 permit tcp 192.168.1.0 0.0.0.255 host 192.168.1.1 eq 443
  access-list 100 permit tcp 192.168.1.0 0.0.0.255 host 192.168.1.1 eq cmd
  access-list 100 tcp refuse any host 192.168.1.1 eq telnet
  access-list 100 tcp refuse any host 192.168.1.1 eq 22
  access-list 100 tcp refuse any host 192.168.1.1 eq www
  access-list 100 tcp refuse any host 192.168.1.1 eq 443
  access-list 100 tcp refuse any host 192.168.1.1 eq cmd
  access-list 100 deny udp any host 192.168.1.1 eq snmp
  access ip-list 100 permit a whole
  Note access-list 101 category CCP_ACL = 1
  access-list 101 permit ip 192.168.1.0 0.0.0.255 any
  Note access-list 102 CCP_ACL category = 1
  access-list 102 permit ip 192.168.1.0 0.0.0.255 any
  Note access-list 103 CCP_ACL category = 128
  access-list 103 allow the ip 255.255.255.255 host everything
  access-list 103 allow ip 127.0.0.0 0.255.255.255 everything
  access-list 103 allow ip 93.179.203.160 0.0.0.7 everything
  Note 104 CCP_ACL category = 0 access-list
  IP access-list 104 allow any host 192.168.1.3
  Note access-list 105 CCP_ACL category = 0
  IP access-list 105 allow any host 192.168.1.2

  -----------------------------------------------------------------------
  ^ C
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  access-class 102 in
  transport input telnet ssh
  line vty 5 15
  access class 101 in
  transport input telnet ssh
  !
  !
  end

  I'd be grateful for help

  concerning

  Hello

  Enter the subnet pool VPN to access-list 3 for source NAT

  You may need to check the firewall also rules to allow the connection based on areas you

  HTH,

  Averroès

• Cisco 1812 no contact to the Radius Server

  Hi guys,.

  IM pretty new to cisco and plays with an 1812 products... I am trying set up an easy VPN server, with the support of ray and I can see that I did everything right, but there is a problem, because the router do not contact the RADIUS server and the RADIUS server has been tested ok.

  Anyone who can see what I'm missing? Worked with this problem for 3 days now.

  Here is my CONF.

  Current configuration: 9170 bytes

  !

  ! Last modification of the configuration to 13:44:49 UTC Tuesday, October 12, 2010

  !

  version 15.1

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  router host name

  !

  boot-start-marker

  boot-end-marker

  !

  !

  no set record in buffered memory

  !

  AAA new-model

  !

  !

  AAA server radius sdm-vpn-server-group 1 group

  auth-port 1645 90.0.0.245 Server acct-port 1646

  !

  AAA authentication login default local

  AAA authentication login sdm_vpn_xauth_ml_1-passwd-expiry group sdm-vpn-server-group 1

  AAA authorization exec default local

  AAA authorization sdm_vpn_group_ml_1 LAN

  !

  !

  !

  !

  !

  AAA - the id of the joint session

  !

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-250973313

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 250973313

  revocation checking no

  !

  !

  TP-self-signed-250973313 crypto pki certificate chain

  certificate self-signed 01

  308201A 5 A0030201 02020101 3082023C 300 D 0609 2A 864886 F70D0101 04050030

  2 040355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30

  69666963 32353039 37333331 33301E17 313031 30313230 39343333 0D 6174652D

  395A170D 2E302C06 1325494F 03540403 32303031 30313030 30303030 5A 303031

  532D 5365 6C662D53 69676E65 4365 72746966 69636174 652 3235 30393733 642D

  06092A 86 4886F70D 01010105 33313330 819F300D 00308189 02818100 0003818D

  BCF94FB0 77240E92 B703CE70 556D5D22 A57823E5 DD4CD4C4 12D639DE 5E97DB2D

  81FBB304 9FA677A6 CAD84F96 9734081B F8F8FAAE 000B02FB AEF7C7B1 73AFA44B

  7D27E112 8991F03B 3D4FD484 34E2EA9F BD426F73 48778F2A AD35AAD6 EC00805D

  249B 8702 D545AEEA 40670DFD 3E6BEC29 EE48A0C6 CB7694FD 722D1A62 3A499CC5

  02030100 01A 36630 03551 D 13 64300F06 0101FF04 05300301 01FF3011 0603551D

  11040A 30 08820652 6F757465 72301F06 23 04183016 801462CB F6BD12F6 03551D

  080C8A89 F9FBBDCE 9751528A FFFD301D 0603551D 0E041604 1462CBF6 BD12F608

  0C8A89F9 FBBDCE97 51528AFF FD300D06 092 HAS 8648 01040500 03818100 86F70D01

  ACA87977 CF 55225 6 9147E57E 8B5A8CA8 46348CAF 801D11C6 9DA57C69 14FA5076

  6844F0CC 4CBEB541 136A483A 69F7B7F0 E44474E8 14DC2E80 CC04F840 B 3531, 884

  F08A492D 8C3902C0 725EE93D AC83A29F 799AAE0F 5795484B B3D02F84 911DB135

  5 189766 C30DA111 6B9B4E46 E999DA5B 202 21B0B9D4 HAS 6900 07A93D8D 41C7FD21

  quit smoking

  dot11 syslog

  IP source-route

  !

  !

  !

  !

  !

  IP cef

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  !

  license udi pid CISCO1812/K9 sn FCZ10232108

  username admin privilege 15 secret 5 P677 $1$ $ Rggfdgt8MeD8letZDL08d.

  !

  !

  !

  type of class-card inspect correspondence sdm-nat-smtp-1

  game group-access 101

  smtp Protocol game

  type of class-card inspect entire game SDM_AH

  match the name of group-access SDM_AH

  type of class-card inspect all sdm-cls-insp-traffic game

  match Protocol cuseeme

  dns protocol game

  ftp protocol game

  h323 Protocol game

  https protocol game

  match icmp Protocol

  match the imap Protocol

  pop3 Protocol game

  netshow Protocol game

  Protocol shell game

  match Protocol realmedia

  match rtsp Protocol

  smtp Protocol game

  sql-net Protocol game

  streamworks Protocol game

  tftp Protocol game

  vdolive Protocol game

  tcp protocol match

  udp Protocol game

  inspect the class-map match sdm-insp-traffic type

  corresponds to the class-map sdm-cls-insp-traffic

  type of class-card inspect all SDM-voice-enabled game

  h323 Protocol game

  Skinny Protocol game

  sip protocol game

  type of class-card inspect entire game SDM_IP

  match the name of group-access SDM_IP

  type of class-card inspect entire game SDM_ESP

  match the name of group-access SDM_ESP

  type of class-card inspect entire game SDM_EASY_VPN_SERVER_TRAFFIC

  match Protocol isakmp

  match Protocol ipsec-msft

  corresponds to the SDM_AH class-map

  corresponds to the SDM_ESP class-map

  type of class-card inspect the correspondence SDM_EASY_VPN_SERVER_PT

  corresponds to the SDM_EASY_VPN_SERVER_TRAFFIC class-map

  type of class-card inspect all match sdm-cls-icmp-access

  match icmp Protocol

  tcp protocol match

  udp Protocol game

  type of class-card inspect correspondence sdm-invalid-src

  game group-access 100

  type of class-card inspect correspondence sdm-icmp-access

  corresponds to the class-map sdm-cls-icmp-access

  type of class-card inspect correspondence sdm-Protocol-http

  http protocol game

  !

  !

  type of policy-card inspect sdm-permits-icmpreply

  class type inspect sdm-icmp-access

  inspect

  class class by default

  Pass

  type of policy-card inspect sdm-pol-NATOutsideToInside-1

  class type inspect sdm-nat-smtp-1

  inspect

  class class by default

  drop

  type of policy-map inspect sdm - inspect

  class type inspect sdm-invalid-src

  Drop newspaper

  class type inspect sdm-insp-traffic

  inspect

  class type inspect sdm-Protocol-http

  inspect

  class type inspect SDM-voice-enabled

  inspect

  class class by default

  Pass

  type of policy-card inspect sdm-enabled

  class type inspect SDM_EASY_VPN_SERVER_PT

  Pass

  class class by default

  drop

  type of policy-card inspect sdm-license-ip

  class type inspect SDM_IP

  Pass

  class class by default

  Drop newspaper

  !

  security of the area outside the area

  safety zone-to-zone

  ezvpn-safe area of zone

  safety zone-pair sdm-zp-self-out source destination outside zone auto

  type of service-strategy inspect sdm-permits-icmpreply

  source of sdm-zp-out-auto security area outside zone destination auto pair

  type of service-strategy inspect sdm-enabled

  safety zone-pair sdm-zp-in-out source in the area of destination outside the area

  type of service-strategy inspect sdm - inspect

  sdm-zp-NATOutsideToInside-1 zone-pair security source outside the area of destination in the area

  type of service-strategy inspect sdm-pol-NATOutsideToInside-1

  in the destination box source sdm-zp-in-ezvpn1 ezvpn-pairs area security

  type of service-strategy inspect sdm-license-ip

  source of sdm-zp-out-ezpn1 of security area outside zone ezvpn-zone time pair of destination

  type of service-strategy inspect sdm-license-ip

  safety zone-pair sdm-zp-ezvpn-out1-source ezvpn-zone of destination outside the area

  type of service-strategy inspect sdm-license-ip

  safety zone-pair source sdm-zp-ezvpn-in1 ezvpn-area destination in the area

  type of service-strategy inspect sdm-license-ip

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  !

  Configuration group Sindby crypto isakmp client

  key TheSommerOf03

  90.0.0.240 DNS 8.8.8.8

  win 90.0.0.240

  SBYNET field

  pool SDM_POOL_2

  Max-users 15

  netmask 255.255.255.0

  ISAKMP crypto sdm-ike-profile-1 profile

  identity Sindby group match

  client authentication list sdm_vpn_xauth_ml_1

  ISAKMP authorization list sdm_vpn_group_ml_1

  client configuration address respond

  virtual-model 1

  !

  !

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac

  Crypto ipsec transform-set esp-SHA2-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA3-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA4-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA5-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA6-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA7-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA8-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA9-ESP-3DES esp-sha-hmac

  Crypto ipsec transform-set esp-3des SHA10-ESP-3DES esp-sha-hmac

  !

  Profile of crypto ipsec SDM_Profile1

  game of transformation-ESP-3DES-SHA10

  isakmp-profile sdm-ike-profile-1 game

  !

  !

  !

  !

  !

  !

  interface BRI0

  no ip address

  encapsulation hdlc

  Shutdown

  !

  interface FastEthernet0

  Description $FW_OUTSIDE$

  IP address 93.166.xxx.xxx 255.255.255.248

  NAT outside IP

  IP virtual-reassembly in

  outside the area of security of Member's area

  automatic duplex

  automatic speed

  !

  interface FastEthernet1

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface FastEthernet4

  !

  interface FastEthernet5

  !

  FastEthernet6 interface

  !

  interface FastEthernet7

  !

  interface FastEthernet8

  !

  interface FastEthernet9

  !

  type of interface virtual-Template1 tunnel

  IP unnumbered FastEthernet0

  ezvpn-safe area of Member's area

  ipv4 ipsec tunnel mode

  Tunnel SDM_Profile1 ipsec protection profile

  !

  interface Vlan1

  Description $FW_INSIDE$

  IP 90.0.0.190 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  Security members in the box area

  !

  local IP SDM_POOL_1 90.0.0.25 pool 90.0.0.29

  local IP SDM_POOL_2 90.0.0.75 pool 90.0.0.90

  IP forward-Protocol ND

  IP http server

  local IP http authentication

  IP http secure server

  IP http timeout policy inactive 600 life 86400 request 10000

  !

  !

  IP nat inside source static tcp 192.168.1.200 25 interface FastEthernet0 25

  the IP nat inside source 1 interface FastEthernet0 overload list

  IP route 0.0.0.0 0.0.0.0 93.166.xxx.xxx

  !

  SDM_AH extended IP access list

  Remark SDM_ACL = 1 category

  allow a whole ahp

  SDM_ESP extended IP access list

  Remark SDM_ACL = 1 category

  allow an esp

  SDM_IP extended IP access list

  Remark SDM_ACL = 1 category

  allow an ip

  !

  exploitation forest esm config

  access-list 1 permit 90.0.0.0 0.0.0.255

  Access-list 100 = 128 SDM_ACL category note

  access-list 100 permit ip 255.255.255.255 host everything

  access-list 100 permit ip 127.0.0.0 0.255.255.255 everything

  access-list 100 permit ip 93.166.xxx.xxx 0.0.0.7 everything

  Remark SDM_ACL category of access list 101 = 0

  IP access-list 101 permit any host 192.168.1.200

  !

  !

  !

  !

  !

  !

  RADIUS-server host 90.0.0.245 auth-port 1645 acct-port 1646

  !

  control plan

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  transport input telnet ssh

  !

  end

  Hello

  Looks like you're missing the key from the radius server configuration "RADIUS-server host 90.0.0.245 auth-port 1645 1646 key your_keyacct-port»

  Thank you

  Wen

• EZ - VPN Cisco cannot access internal network

  Hello

  I configured an EZ - VPN on my router, but after a login successful in the VPN, I can't ping my internal network or access all the resources. Also, I can't ping my router VPN Client IP address.

  Can someone take a look at my Config?

  Here is my config:

  Current configuration: 7730 bytes

  !

  ! Last configuration change at 16:24:55 UTC Tuesday, June 14, 2011 by suncci

  ! NVRAM config update at 20:21:30 UTC Friday, June 10, 2011 by suncci

  !

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  router host name

  !

  boot-start-marker

  boot-end-marker

  !

  no set record in buffered memory

  no console logging

  !

  AAA new-model

  !

  !

  AAA authentication login default local

  local AUTH_VPN AAA authentication login

  AAA authorization exec default local

  local AUTHORIZE_VPN AAA authorization network

  !

  !

  AAA - the id of the joint session

  IP cef

  !

  !

  !

  !

  name-server IP 208.67.222.222

  name of the IP-server 205.188.146.145

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  Crypto pki trustpoint TP-self-signed-1861908046

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 1861908046

  revocation checking no

  rsakeypair TP-self-signed-1861908046

  !

  !

  TP-self-signed-1861908046 crypto pki certificate chain

  certificate self-signed 01

  3082023E 308201A 7 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  69666963 31383631 39303830 6174652D 3436301E 170 3032 30333031 30313431

  30365A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 38363139 65642D

  30383034 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

  8100AD30 FB88278D F9010218 AD58E479 21C00A39 76974 HAS 87 DF43C948 D56E65CC

  98F484A1 1F5BA429 449E416F B3C5729C 78598186 8873 HAS 168 DB9EEAAA B0521523

  C8011877 14888C9A 193E43E3 C3575491 74A940A2 B2970549 FE436E4A 4DA6FB23

  C 21, 20110 0CD3A8F6 32EAD292 648F9E32 7EE6C86F 181FC3C2 8F91DA66 A3886F5C

  0203 010001A 3 66306430 1 130101 FF040530 030101FF 30110603 0F060355 467D

  1104 A 0, 300882 06526F75 74657230 551D 1 230418 30168014 FD800727 1F060355

  5FA9AD41 6EAE99B0 1EDA2735 C0DBBBCC 301D 0603 551D0E04 160414FD 8007275F

  A9AD416E AE99B01E DA2735C0 DBBBCC30 0D06092A 864886F7 0D 010104 05000381

  810076CE E5030E51 5BD6FE9F A8A42483 53E7D250 CDE09E87 6AD77195 09D225AF

  25858304 034D146B C4970C31 F6EF496B 7F57C772 7A1F0DFE 8A06B878 919AFD58

  212E475A 0346ADA6 D629BDFC AE58C42A 36D971D1 3BAB8541 EAC0AA10 919816A 1

  E22F5015 52086757 2171A4C7 6832C2BC 89ADEF72 95A81A51 0B888B1C 9EE9EE58 8E65

  quit smoking

  !

  !

  username privilege 15 password 0 xxxxx xxxxxx

  Archives

  The config log

  hidekeys

  !

  !

  crypto ISAKMP policy 1

  BA aes

  preshared authentication

  Group 2

  !

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto nat keepalive 5

  !

  crypto ISAKMP client VPN-Sun-group configuration group

  key to 12345

  DNS 208.67.222.222

  pool VPN_Pool

  ACL VPN_Test

  Crypto isakmp ISAKMP_Profile_EZVPN profile

  Group of Sun-VPN-Group identity match

  list of authentication of client AUTH_VPN

  AUTHORIZE_VPN of ISAKMP authorization list.

  client configuration address respond

  Client configuration group Sun-VPN-Group

  virtual-model 1

  !

  !

  Crypto ipsec transform-set Sun-VPN aes - esp esp-sha-hmac

  !

  Profile of crypto ipsec IPSEC_Profile_EZVPN

  game of transformation-Sun-VPN

  ISAKMP_Profile_EZVPN Set isakmp-profile

  !

  !

  !

  !

  !

  !

  !

  !

  type of class-card inspect all internal match

  tcp protocol match

  udp Protocol game

  dns protocol game

  http protocol game

  https protocol game

  match icmp Protocol

  type of class-card inspect entire game Internet

  tcp protocol match

  udp Protocol game

  match icmp Protocol

  type of class-card inspect match, all the traffic-IntraNet-InterNet

  tcp protocol match

  udp Protocol game

  match icmp Protocol

  match the group-access InterNet-to-IntraNet-ACL name

  type of class-card inspect match, all the traffic-InterNet-IntraNet

  tcp protocol match

  udp Protocol game

  match icmp Protocol

  !

  !

  type of policy-card inspect InterNet-IntraNet-policy

  class type inspect traffic-IntraNet-InterNet

  inspect

  class class by default

  drop

  type of policy-card inspect IntraNet-InterNet-policy

  class type inspect traffic-InterNet-IntraNet

  inspect

  class class by default

  drop

  type of policy-card inspect sdm-policy-Internet

  class type inspect Internet

  inspect

  class class by default

  type of policy-card inspect internal sdm-policy

  class type inspect internal

  inspect

  class class by default

  drop

  !

  Security for the Internet zone

  security of the inner area

  the IntraNet zone security

  Description Interfaces all connected to the Intranet

  Security for the InterNet zone

  Description of all Interfaces connected to the Internet

  destination inner security zone-pair source sdm-zp-internal-self self

  type of service-strategy inspect sdm-policy-Internet

  zone-pair security IntraNet - InterNet source IntraNet InterNet destination

  type of service-strategy inspect IntraNet-InterNet-policy

  InterNet - IntraNet source InterNet destination IntraNet security zone-pair

  inspect the type of service-strategy InterNet-IntraNet-policy

  !

  !

  !

  !

  interface Loopback0

  IP 192.168.1.1 255.255.255.0

  !

  interface FastEthernet0/0

  Description external PPPOE Interface ETH - WAN$

  no ip address

  response to IP mask

  NAT outside IP

  IP virtual-reassembly

  automatic speed

  PPPoE enable global group

  PPPoE-client dial-pool-number 1

  No cdp enable

  !

  interface FastEthernet0/1

  switchport access vlan 10

  !

  interface FastEthernet0/2

  switchport access vlan 10

  !

  interface FastEthernet0/3

  switchport access vlan 10

  !

  interface FastEthernet0/4

  switchport access vlan 10

  !

  type of interface virtual-Template1 tunnel

  IP unnumbered Loopback0

  members of the IntraNet zone security

  source of Dialer1 tunnel

  ipv4 ipsec tunnel mode

  Tunnel IPSEC_Profile_EZVPN ipsec protection profile

  !

  interface Vlan10

  Description $FW_INSIDE$

  IP 192.168.0.3 255.255.255.0

  response to IP mask

  no ip redirection

  no ip unreachable

  IP nat inside

  IP virtual-reassembly

  members of the IntraNet zone security

  route IP cache flow

  !

  interface Dialer1

  Description $FW_OUTSIDE$

  the negotiated IP address

  no ip redirection

  no ip unreachable

  no ip proxy-arp

  IP mtu 1492

  NAT outside IP

  IP virtual-reassembly

  the Member's area InterNet security

  encapsulation ppp

  IP tcp adjust-mss 1452

  Dialer pool 1

  Dialer-Group 1

  No cdp enable

  PPP authentication chap callin pap

  PPP chap hostname pty/69733

  password PPP chap 0 DSLconnect

  PPP pap sent-username pty/69733 password 0 DSLconnect

  !

  IP pool local VPN_Pool 192.168.1.30 192.168.1.40

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0 Dialer1

  IP route 192.168.1.0 255.255.255.0 Dialer1

  !

  !

  IP http server

  local IP http authentication

  IP http secure server

  IP nat inside source overload map route NAT interface Dialer1

  !

  InterNet-to-IntraNet-ACL extended IP access list

  permit tcp any 192.168.0.0 0.0.0.255

  allow udp all 192.168.0.0 0.0.0.255

  allow icmp any 192.168.0.0 0.0.0.255

  refuse an entire ip

  Internet extended IP access list

  Note Internet

  Remark SDM_ACL = 2 category

  Notice all THE

  allow a full tcp

  allow a udp

  allow icmp a whole

  allow an ip

  NAT extended IP access list

  Licensing ip 192.168.0.0 0.0.0.255 any

  deny ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255

  VPN_Test extended IP access list

  Licensing ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255

  !

  Remark SDM_ACL category of access list 1 = 2

  access-list 1 permit 192.168.0.0 0.0.0.255

  access-list 1 permit 192.168.1.0 0.0.0.255

  Note access-list 2 = 2 SDM_ACL category

  access-list 2 allow to 192.168.1.0 0.0.0.255

  access-list 5 permit one

  access-list 10 permit 192.168.0.0 0.0.0.255

  access-list 102 deny ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 102 permit ip 192.168.0.0 0.0.0.255 any

  not run cdp

  !

  !

  !

  route NAT allowed 10 map

  corresponds to the IP NAT

  !

  !

  !

  control plan

  !

  !

  !

  !

  !

  !

  !

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  exec-timeout 30 12

  privilege level 15

  Synchronous recording

  transport input telnet ssh

  !

  NTP-period clock 17208070

  NTP 17.151.16.21 Server

  end

  As I've mentioned earlier, you can of course ping from router to 192.168.0.2 because they are in the same subnet. It uses ARP instead of routing to the device when you are pinging on the same subnet.

  The switch is configured with the correct default gateway? The switch must be configured with the default gateway 192.168.0.3.

  You also mention that you can ping 192.168.0.30 which is beyond the router. This means that it is not the router VPN configuration error, but rather the terminal that you are trying to ping since you can ping 192.168.0.30.

• CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION

  Hello

  I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match?   Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.

  Please see my full configuration:

  Router #sh run
  Building configuration...

  Current configuration: 8150 bytes
  !
  ! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  ! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
  version 15.1
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  Passwords security min-length 6
  no set record in buffered memory
  enable secret 5 xxxxxxxxxxx
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  !
  No ipv6 cef
  IP source-route
  no ip free-arps
  IP cef
  !
  Xxxxxxxxx name server IP
  IP server name yyyyyyyyy
  !
  Authenticated MultiLink bundle-name Panel
  !

  parameter-map local urlfpolicy TSQ-URL-FILTER type
  offshore alert
  block-page message "Blocked according to policy"
  parameter-card type urlf-glob FACEBOOK
  model facebook.com
  model *. Facebook.com

  parameter-card type urlf-glob YOUTUBE
  mires of youtube.com
  model *. YouTube.com

  parameter-card type urlf-glob CRICKET
  model espncricinfo.com
  model *. espncricinfo.com

  parameter-card type urlf-glob CRICKET1
  webcric.com model
  model *. webcric.com

  parameter-card type urlf-glob YAHOO
  model *. Yahoo.com
  model yapo

  parameter-card type urlf-glob PERMITTEDSITES
  model *.

  parameter-card type urlf-glob HOTMAIL
  model hotmail.com
  model *. Hotmail.com

  Crypto pki token removal timeout default 0
  !
  Crypto pki trustpoint TP-self-signed-2049533683
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2049533683
  revocation checking no
  rsakeypair TP-self-signed-2049533683
  !
  Crypto pki trustpoint tti
  crl revocation checking
  !
  Crypto pki trustpoint test_trustpoint_config_created_for_sdm
  name of the object [email protected] / * /
  crl revocation checking
  !
  !
  TP-self-signed-4966226213 crypto pki certificate chain
  certificate self-signed 01
  3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
  69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332

  quit smoking
  encryption pki certificate chain tti
  for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
  license udi pid CISCO1905/K9 sn xxxxxx
  licence start-up module c1900 technology-package datak9
  username privilege 15 password 0 xxxxx xxxxxxx
  !
  redundancy
  !
  !
  !
  !
  !
  type of class-card inspect entire tsq-inspection-traffic game
  dns protocol game
  ftp protocol game
  https protocol game
  match icmp Protocol
  match the imap Protocol
  pop3 Protocol game
  netshow Protocol game
  Protocol shell game
  match Protocol realmedia
  match rtsp Protocol
  smtp Protocol game
  sql-net Protocol game
  streamworks Protocol game
  tftp Protocol game
  vdolive Protocol game
  tcp protocol match
  udp Protocol game
  match Protocol l2tp
  class-card type match - all BLOCKEDSITES urlfilter
  Server-domain urlf-glob FACEBOOK game
  Server-domain urlf-glob YOUTUBE game
  CRICKET urlf-glob-domain of the server match
  game server-domain urlf-glob CRICKET1
  game server-domain urlf-glob HOTMAIL
  class-map type urlfilter match - all PERMITTEDSITES
  Server-domain urlf-glob PERMITTEDSITES match
  inspect the class-map match tsq-insp-traffic type
  corresponds to the class-map tsq-inspection-traffic
  type of class-card inspect correspondence tsq-http
  http protocol game
  type of class-card inspect all match tsq-icmp
  match icmp Protocol
  tcp protocol match
  udp Protocol game
  type of class-card inspect correspondence tsq-invalid-src
  game group-access 100
  type of class-card inspect correspondence tsq-icmp-access
  corresponds to the class-map tsq-icmp
  !
  !
  type of policy-card inspect urlfilter TSQBLOCKEDSITES
  class type urlfilter BLOCKEDSITES
  Journal
  reset
  class type urlfilter PERMITTEDSITES
  allow
  Journal
  type of policy-card inspect SELF - AUX-OUT-policy
  class type inspect tsq-icmp-access
  inspect
  class class by default
  Pass
  policy-card type check IN and OUT - POLICIES
  class type inspect tsq-invalid-src
  Drop newspaper
  class type inspect tsq-http
  inspect
  service-policy urlfilter TSQBLOCKEDSITES
  class type inspect tsq-insp-traffic
  inspect
  class class by default
  drop
  policy-card type check OUT IN-POLICY
  class class by default
  drop
  !
  area inside security
  security of the OUTSIDE area
  source of security OUT-OF-IN zone-pair outside the destination inside
  type of service-strategy check OUT IN-POLICY
  zone-pair IN-to-OUT DOMESTIC destination outside source security
  type of service-strategy inspect IN and OUT - POLICIES
  security of the FREE-to-OUT source destination free outdoors pair box
  type of service-strategy inspect SELF - AUX-OUT-policy
  !
  Crypto ctcp port 10000
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  Group 2
  !
  ISAKMP crypto client configuration group vpntunnel
  XXXXXXX key
  pool SDM_POOL_1
  include-local-lan
  10 Max-users
  ISAKMP crypto ciscocp-ike-profile-1 profile
  vpntunnel group identity match
  client authentication list ciscocp_vpn_xauth_ml_1
  ISAKMP authorization list ciscocp_vpn_group_ml_1
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-TRANSFORMATION TSQ
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  !
  interface GigabitEthernet0/0
  Description LAN INTERFACE-FW-INSIDE
  IP 172.17.0.71 255.255.0.0
  IP nat inside
  IP virtual-reassembly in
  security of the inside members area
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  Description WAN-INTERNET-INTERNET-FW-OUTSIDE
  IP address xxxxxx yyyyyyy
  NAT outside IP
  IP virtual-reassembly in
  security of the OUTSIDE member area
  automatic duplex
  automatic speed
  !
  interface Serial0/0/0
  no ip address
  response to IP mask
  IP directed broadcast to the
  Shutdown
  no fair queue
  2000000 clock frequency
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered GigabitEthernet0/0
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
  IP forward-Protocol ND
  !
  no ip address of the http server
  local IP http authentication
  IP http secure server
  !
  IP nat inside source list 1 interface GigabitEthernet0/1 overload
  IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
  IP route 192.168.1.0 255.255.255.0 172.17.0.6
  IP route 192.168.4.0 255.255.255.0 172.17.0.6
  !
  access-list 1 permit 172.17.0.0 0.0.255.255
  access-list 100 permit ip 255.255.255.255 host everything
  access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
  access-list 100 permit ip yyyyyy yyyyyy everything
  !
  !
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  transport input ssh rlogin
  !
  Scheduler allocate 20000 1000
  end

  A few things to change:

  (1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.

  (2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:

  access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255

  access-list 120 allow ip 172.17.0.0 0.0.255.255 everything

  overload of IP nat inside source list 120 interface GigabitEthernet0/1

  No inside source list 1 interface GigabitEthernet0/1 ip nat overload

  (3) OUT POLICY need to include VPN traffic:

  access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255

  type of class-card inspect correspondence vpn-access

  game group-access 121

  policy-card type check OUT IN-POLICY

  vpn-access class

  inspect

• Impossible to clone virtual machines to VSAN datastore

  Hi all

  Whenever we try to clone a virtual machine using vCenter vSAN not store data to the vSAN data store fails with the following error.

  File /vmfs/volumes/540024e7-2d8bb59e-0bef-40a8f0305c2c/blr7-dhcp-1/***.vmdk not found.

  It is a cluster of vSAN 3 node with 1 * 2 SSD * magnetic disk by the configuration of the node.

  ! 0 gig uplink connected to vDS with one vlan separate tag group of ports (Distributed Switch). Multicast IGMP snooping is enabled on the VIRTUAL LAN that is used for the VTEP.

  Storage strategy is: tolerate 1, band 3, 70% cache read

  Storage strategy using 3-band

  Cluster shows also in good health

  ~ # esxcli vsan cluster get

  Cluster information

  Enabled: true

  Current local time: 2015-01 - 05 T 14: 33:05Z

  Local node UUID: 54a7b9fa-afde-3f59-1d67-40a8f0305c2c

  State of the local node: BACKUP

  Health status of local node: HEALTHY

  Cluster under master UUID: 53e07d1e-4154-1e32-1cc6-40a8f0305c68

  Cluster under backup UUID: 54a7b9fa-afde-3f59-1d67-40a8f0305c2c

  Cluster under UUID: 5276ec11-3024-d7e5-6696-cb2b47017814

  Cluster under membership entry revision: 2

  Subgroup Member UUID: 53e07d1e-4154-1e32-1cc6-40a8f0305c68, 54a7b9fa-afde-3f59-1 d 67-40a8f0305c2c, 54a6abf6-9350-0741-2815-40a8f030f494

  Under Cluster Membership UUID: 9f6eaa54-5573-d61e-d26f-40a8f0305c68

  ~ network vsan # esxcli list

  Interface

  VmkNic name: vmk3

  IP Protocol: IPv4

  Interface UUID: 1f6ca254-337e-9641-1c50-40a8f0305c68

  Agent group multicast address: 224.2.3.4

  Agent Group Multicast Port: 23451

  Multicast Address Group Master: 224.1.2.3

  Master Group Multicast Port: 12345

  Multicast TTL: 5

  ~ # esxcli network ip connection list | egrep 224

  UDP 0 0 224.1.2.3:12345 0.0.0.0:0 34586 worker spend

  UDP 0 0 224.2.3.4:23451 0.0.0.0:0 34586 worker spend

  Also the deployment of the virtual machine to vSAN datastore also very slow.

  Could you please help me understand the issue.with cloning.

  With respect,

  Aju

  This post should help determine the number of hosts.

  VSAN part 25 - hosts much-needed to tolerate failures? CormacHogan.com

  The number of disks is harder once you start adding bandwidth, because you also have to take into components witness account.

  Each band will require a disc, and you increase FTT, you will need to double the number of disks you want to mirror any of the components score. And then, of course, welcome the witnesses.