UDS RoutineControl VI a/d converters

Similar Questions

• Can I use VGA composite converters on Satellite L300?

  Hello.

  I know I can find transformers to convert the VGA to composite, to plug into a TV video. These converters are boxes with electronics in them.

  But I also find this cable:
  ZFR_LC_Informatique_Connectiques http://CGI.eBay.fr/VGA-sur-TV-convertisseur-S-Video-RCA-cable-Adaptateur_W0QQitemZ290286654719QQcmdZViewItemQQpt? hash = item29028665 4719&_trksid=p3286.c0.m14&_trkparms=72%3A1526|66%3 A2 | 65% 3-12 | 39% 3 a 1. 240% 3A 1318 #ebayphotohosting

  They say: "Please check your PC & Video Card manual or manufacturer to make sure that your graphics card has TV-Out function capability through the connector VGA to ensure that this cable will work for you!"

  So I would like to know if the Satellite L300 16 M has such a function, or if I have to buy a converter.

  Thank you.

  Hello.

  The answer is Yes, you can. Check the information here: http://www.intel.com/products/notebook/chipsets/GM965/GM965-overview.htm and search for TV connection. However, it is recommended that you install the latest driver from Intel to get the best performance from the graphics card. To install the driver from intel, you must uninstall the current driver and run the Setup file.

  Hope my answer is clear.

  Kind regards.

• Topology line EtherCAT with fiber/fiber converters

  Hello

  I have a request where I will order several NI 9144 slave chassis in a line of a master cRIO topology. The chassis must be 10kV + isolation from each other and the captain so I'll use converters of fiber on the link ethernet between each frame. The lengths of links are relatively short)<>

  Fiber converters does meet a particular specification, and if so do you have any recommendations?

  I'd better be using using standard Ethernet with NI 9149? I can cope without the deterministic calendar.

  Thank you

  Richard.

  Hi Richard,

  The EtherCAT protocol normally works on 100BASE-TX and can also run on 100BASE-FX (Sources here and here). I'm guessing that you have seen the KB that explains that you need for different cheating / hubs for EtherCAT and makes you wonder if the optical converters fall into this same category?

  The need for special switches / hubs is because EtherCAT junctions stars work differently that normal Ethernet as the packages hubs need a particular routing. However, optical converters online and do not affect the sense go packages. They are just bit conversion of the tensions light pulses. The main thing to consider would be how much latency converters to introduce network - as this will eventually affect your EtherCAT minimum cycle time.

  That said, NEITHER does not test the optical converters, but I've heard customers who use optical converters before (link sorry, not turned to the audience of reference available). As I mentioned above, the EtherCAT protocol specify how 100BASE-TX and 100BASE-FX, so I'll make sure the converter is in conformity with these standards.

• OBD II enhanced PIDs with a/d converters

  The ADCS takes by recovering the extended PIDs or improved through service $22, as specified in J2190? Or supports only services $01 - $10 as specified in J1979?

  Manual linking Hoovah watch it takes in charge ReadDataByIdentifier, which is $ 22.  These services are usually referred to as UDS (ISO 14229), but there is a lot of overlap between all the different specifications.

• Sony TV converters

  I have the full camera framed with Sony A99v. My goal are Sony 70-300mm G, Sigma 150-500mm F5-6. 3 APO HSM. 1.4 to 2.0 of Sony AF teleconverters will work with the A99 motorway and the 2 lens I mentioned. What other Sony lens work with the teleconverters and A99v? I have not found information on what works with these converters. I don't want to put the money without knowing that they will work. Thank you

  That these lenses are compatible with the teleconverters. the two lenses that you are not on the list.

  NOTE: due to the quality of this converter design (elements 5/4 groups), the only teleconverter will adapt and work with a wide selection of lenses. Only the Sony or Minolta following objectives are compatible:

  • f/2.8 300mm (D) SSM
  • f/2.8 70-200mm (D) SSM
  • f/2.8 APO G 200
  • f/2.8 APO G 300
  • f/4 APO G 300
  • f/4.5 APO G 400
  • 600 f/4 APO G

  Note: the following objectives can be used in manual focus mode:

  • 70-400mm f/4-5, 6 G SSM
  • 135mm f/2.8 [T4.5] STF
  • Macro 200mm f/4 G

  all a-mount will work with your A99 but it is strongly recommended that you use a lens that is designed for a full frame as your A99 sensor, also the problem with the teleconverters is that they reduce the amount of light to the sensor so if your using the Converter 2 x one F2.8 it becomes a F5.6.

• Difference between dynamic and static converters

  Hi, I am looking to understand the difference between a static and a dynamic DAC. I will work on a project that has a very high number of analog outputs 30 IO. I need a Board of 16-bit resolution. I intend to update outputs at a low frequency in the order of 1 Hz (on user deand). I have suggested to use the NI PXI-6704 card with 32 outputs. In order to future-proof our equipment, we plan to buy a few boards that are capable of fast output update rate (a few hundred Hz). I want to know what I'm lost and win with static and dynamic converters. What advice (which are quite fast) would work better for this high number of IO? I'm looking at the 6733, but I am not quite convinced that it is the best alternative.

  Hello

  If you get all PXI/SMU modules, you'll either buy a controller MXI to connect to the desktop computer or to spend more money and get a controller embedded to the SMU chassis. If you want to run applications in real time in the future, you can spend more money upfront and get the controller shipped instead of the connection of MXI. MXI connection allows flexibility of system more than the on-board controller because it allows you to run additional devices that may not be available in PXI format. The two methods are the same in terms of future evidence, they just offer different possibilities (flexibility or real-time).

  Eric

• VBA converters for oraxcel?

  I have the full version of oraxcel. It does not work since I couldn't activate macros download data to oracle. VBA converters installed. Help me solve the problem.

  Hello

  As the issue is specifically related to Oraxcel. I suggest that you post the question on the link provided below for assistance.

  http://www.oraxcel.com/Top10/

• HP ENVY TouchSmart 15.6 ": laptop internal voltage converters

  Hello

  I bought two laptops here in the United States that are the envy of HP Touchsmart (model No. M6-n015dx) and HP Pavilion (model No. 17 - f115dx).

  I have will have to be used in Ireland (Europe) and am curious if these laptops have integrated internal voltage converters to deal with the tension of eextra.

  I picked up two Irish caps facing the adapter charger/coonverter (don't know exactly how it's called) and I wonder - is it enough?

  Thanks for your help,

  Brian

  Hello

  No, but he already has EXTERNAL "converter" which is the charger. Please turnthe charger up-side-down to see. He must have a line that says Input: 100V-240V 50 / 60 Hz this means that you can use almost anywhere with the help of domestic electricity. All you need is for about $ 10-$ 15 for a small adapter, you can buy it at several tourist shops and airports.

  http://www.eBay.com/Sch/adapters-converters-/19315/i.html

  Kind regards.

• UDS for Web service URL error

  I try to get authenticator for UDS.

  I created/enterprise/admin/util/ws as URL for bwsUtilService.url.

  I'm gettting an error state HTTP:404.

  Nobody knows which is the url of the UDS (Webservice)?

  I solved the problem. UDS Web service port was not correct.

  Thank you

• Jabber allows two UDS Server?

  I have two domain. They are HK and Taiwan.

  I connect two domain with VPN.

  Can I use two services uds for contact?

  Be setting in CUCM or jabber - config.xml?

  If your question concerns two cucm different clusters then you can follow the deployment guide

  "Resolution contact with multiple Clusters.

  To contact resolution with several clusters of Cisco Unified Communications Manager, synchronize all users in the company for each cluster directory. Implement a subset of these users on the appropriate group.

  For example, your organization has 40,000 users. 20,000 users reside in North America. 20,000 users resident in Europe. Your organization includes the following groups of Cisco Unified Communications Manager for each location:

  • CUCM-cluster-na for North America

  • CUCM-cluster-EU for Europe

  In this example, synchronize all 40,000 users for both groups. Available to the 20,000 users in America on cucm-cluster-na and the 20,000 users in Europe on cucm-cluster-had.

  When users in Europe call users in North America, Cisco Jabber retrieves the coordinates of the user in Europe of cucm-cluster-na.

  When users in North America call users in Europe, Cisco Jabber retrieves the coordinates of the user in North America of cucm-cluster-had. »

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/Jabber/Windows/9_7/ja...

  The guide does not have any support for the definition of two servers NODES diff in the jabber config file.

  HTH

  Manish

• uplinks - fiber to Ethernet converters

  Hello

  I plan to use the fiber to Ethernet converters for all rising 25 and will connect to WS-C3750X-48PF-S.

  I got WS-C3750X-24 s - E in mind but need of copper as well as connections to connect routers and some other systems.

  Is it a good idea to use these converters for all uplinks or should I consider WS-C4506-E?

  You can look at the X 4500 also. They work very well as a distribution switch. Personally, I would stay away from media converters. It's one thing to fail and the majority of them have little visibility when something is not bad. However, if you decide to go with them I would look at Transition Networks.

• Where can I find Master UDS Bus kernel USB driver software Bus by TCP?

  I cloned just my laptop to another laptop similar. I reinstalled all the drivers that came with the laptop recipient... but apparently not the one for the UDS kernel USB software Bus Master Bus by TCP and Windows 7 could not find one on my computer or online.

  Maybe

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/device-problem-driver-for-UDs-master-bus-of-kernal/c97a61ec-906F-4A72-873e-53d067b1c0e5

• offset of pagina completa, uds me can help?

  Hola soy usuario adobe reciente muse, y estoy buscando formation of hacer offset of pagina completa, uds me can help?

  Hello

  If you're talking about single page scrolling site then you can take the references from the links below.

  Adobe Muse CC 2014 | A Page of drop | Muse for you - YouTube

  How to create a scroll one Page Site in Muse - YouTube

  How to make a website simple page that scrolls like this muse adobe site?

  Use of anchors for page designs unique fluid scrolling with Adobe Muse

  Kind regards

  Vivek

• Point-reusable converters

  Can we create point reusable converters in flex?

  As if I have 10 datagrids with different dataproviders

  I want to display a column in each datagrid as a link button, can I make using the rendering engine a single point?

  Kind regards

  Abhishek

  Wel, that no one answered...

  I got the answer and even display...

  /////////////////////////////////////////////////////////////////

  lnBtnItemRenderer

  ////////////////////////////////////////////////////////////////

  package com.nol.atplan.reportresult.view

  {

  import flash.events.MouseEvent;

  Import mx.containers.HBox;

  Import mx.controls.CheckBox;

  SerializableAttribute public class CheckBoxRenderer extends HBox {}

  [Bindable]

  private var selectedItem:Object;

  private var chbox:CheckBox;

  public void CheckBoxRenderer() {}

  Super();

  chbox = new CheckBox();

  chbox.addEventListener (MouseEvent.CLICK, onChangeHandler);

  }

  override public function set data(value:Object):void {}

  selectedItem = value;

  {if(value!=null)}

  If (value. Flag == false) {}

  chbox. Selected = false;

  } else if (value. Flag == true) {}

  chbox. Selected = true;

  }

  }

  addChild (chbox);

  }

  }

  }

  ////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////////

  objCol's advanced datagrid col!

  var colRendererFactory:ClassFactory = new ClassFactory (lnBtnItemRenderer);

  colRendererFactory.properties = {columnName:datagridDetails [i] .hea derText};

  objCol.itemRenderer = colRendererFactory;

• What exactly are the unscaledWidth and unscaledHeight in the mobile element converters?

  Hello

  What are exactly the unscaledWidth and unscaledHeight which are passed to the method Measure [] for a mobile element converter?

  I guess converters start at "default" width and height (so without scales) which is reduced based on the DPI. Isn't it?

  Thank you.

  It is roughly the same as the updateDisplayList method.

  The process to measure and set the minimum limits (measuredWidth and measuredHeight) in the Measure [] function, then in the layoutContents method that you will be spending the actual values (preferred), because it is located in the page layout. Usually, that's what you define as measured limit, but sometimes it can be different, as if the content should be reduced or enlarged to fit a parent container.