UEFI auto turn on after power failure

I bought a desktop computer HP Pavillion PC500-225es (have a holiday home in Spain where the suffix are).

It is running Windows 8.1 equipped a UEFI BIOS.

I want the PC automatically restarts when power is restored after a power failure, but I don't see any option to do this in the UEFI BIOS. Is it normal for a UEFI BIOS? I have had many computers with a BIOS for old style and that I can remember all had the ability to set the auto restart after power fail.

I don't know how a UEFI BIOS integrates with Windows 8.1 but I see no option for this in point 8.1 of Windows either.

Someone at - it ideas?

In addition, because the PC was bought in Spain, the BIOS is in Spanish. It seems not be anyway to change that in English, my native language. Not a big problem I can get in Spanish and may apply to the Google translate if I have to, but it would be easier if there was an option to switch to English.

I ran the HP Support Assistant, and everything is up-to-date, there is no update to download BIOS.

I guess I'm just stuck with the situation unless HP come with an update of the BIOS to add installation.

Please see the BIOS for the motherboard Jasmine settings the settings you are looking for. Although this document is intended for the 'Jasmine' motherboard and your computer uses the "JasmineR', the settings should be similar if not the same thing.

To access the BIOS Setup page... "Turn on the computer and immediately press the F10 key repeatedly, once per second, until the opening of the Computer Configuration utility."

The following options are found in the Power Options:

Messages POST (Power On Self Test) Turn on or off
After the loss of power Previous state, or disable
POSITION of delay (in seconds) Zero, 5, 10, 15, 20 or 60 seconds

If you have any other questions, feel free to ask.

Please click the 'Thumbs Up' white LAURELS to show your appreciation

Tags: HP Desktops

Similar Questions

  • I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

    I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

    I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

    There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

    Hey AmnonMikeCohen,

    Thank you for being a part of the communities of Apple Support.

    I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

    Reset the management system (SCM) controller on your Mac.

    How to reset the NVRAM on your Mac.

    See you soon.

  • HP 280 G1 (N9E78EA): Partition disappears after power failure, watch now unallocated

    Hello!
    I have a PC
    HP 280 i5 - 4590S G1 / 8 GB/500/DVD-RW/W10P + 7Pro64
    and
    Pro series SSD Plextor 128GB 2.5 "SATA SSD M6.

    Partition disappears after power failure, watch now unallocated.
    I tried to use TestDisk to see what was going on. After crossing the 'Analysis' command and deep research, but the partition disappears.
    Any suggestions on what I should do next?

    Your SSD have lost files due to the power failure system sudden. I suggest you run CHKDSK to fix this error. Also remember, if the data stored in your SSD are important to you, then first the software of raw data as WDR pro of stellar phoenix recovery and then apply diagnoses to repair.

  • Lenovo IdeaCentre Q180 behavior after power failure

    Hello

    I need a computer that automatically restarts after a power failure.
    I find nothing on the IdeaCentre Q180 behavior in such a case.

    Did the reboot of the IdeaCentre Q180 himself after power failure or is it possible to activate this feature?

    This behavior is very important for my new system.

    Thank you for your response.

    Kind regards
    Theodoor

    Hi theodoor, welcome to the forums.

    I am not personally acquainted with the Q180, but I had a quick glance in the simulator of BIOS and I am sure that the service you're looking for is available in the BIOS.

    Please see the photo attached, (too big to post), it will open in the same window, so please click on your back button on the browser to return to this site.

  • root > \system32/had.dll message after power failure.

    After power failure, I got the above message.  I tried to rebuild the CD system following the instructions Microsoft but still can't het PC to start.  Any ideas anyone?

    Thank you

    Since you didn't say what were these instructions, we do not know what you were doing!

    You need to start the recovery console, run chkdsk r, then /Rebuild. bootcfg The first part can be read here:

    http://www.icompute.info/System_restore_from_xp_cd.htm

    You will need to understand how your PC (you neglected to tell us the make, model and model number!) can boot from the CD-ROM. Then, run the Recovery Console. DO NOT ENTER THE INSTALLER! (If you do, you run the risk to wipe your entire disk clean!) Follow the indications of the above page and then stops after having successfully performed chkdsk/r. In other words, don't do the fixmbr part!

    Then, for the second part, read here:

    http://www.icompute.info/halldll_error.htm

    Restart the PC in the usual way (that is, start with the hard drive) and let us know if you are at the back of buisiness.

  • How to wake up a T42 - after power failure.

    I just changed to a T42 as a home automation web application server in a vacation home that is unoccupied for weeks and months.  I'm gone with a Thinkpad retired because the processor running at 40 degrees Centrigrade with its fan-Off in our cool basement unless there is some computer activity... hoping the Thinkpad would unnattended for years in this quiet situation with the HDD as the only moving part.

    When the power goes out, I have an inverter for 2 hours, plus the Thinkpad battery for 4-5 hours (off screen), but then it stops with an extended power failure.  We cannot go back to this place for months to re - turn on the computer.

    The bios settings on T42 for "Startup Timed" do not work for me or anyone else I saw on the Thinkpad forums.

    Or, using the Task Scheduler with the "wake the computer" option when you run an application (such as the calculator or Notepad) do not wake the T42 from sleep mode. (The laptop could go to sleep when the battery reaches 50%)... then having the scheduler run Notepad all morning at the cases where the computer is in standby due to a power failure in the course of 24 hours prior... but it does not work.

    Is there another way to start or wake a T42 on a calendar or a network drive?   I didn't "want to solder connections in the power switch - although if it is possible if I could use a phone remote access to the automation system to turn on the computer with a closing contact, but his disorder at."

    After testing, I switch to Windows 7 Pro. The T42 can going mode sleep after x minutes on battery. It can be awakened by running a lazy batch file by using the Windows Task Scheduler.

    Thanks for your suggestion

  • Fans always operate at high speed after power failure

    HP Pavilion Slimline S5780T - Windows 7 Home Premium 64-bit

    After a power failure a night or more recent, our Pavilion Slimline case fan and CPU fan have both run at high speed all the time, starting from the system. The level of noise is intolerable.

    I opened and cleaned all the dust from the inside of the case, including the removal of the heatsink from the CPU. Everything is clean.

    I ran the following HP Vision diagnostic, test the system, including fans. During the test of fan, the fans ran at 100%, then fell to the former level normal, quiet, then ramp back up to 100%. So says HP fans diagnostic tests are OK when there is always a problem. And it is possible for them to run at slow, normal speed.

    I installed the free SpeedFan utility, but there is not place to adjust the fan speed manually.

    How can I find the problem and the fans run at normal speed, as they did before the power failure? Everything that controls the speed of the CPU fan and the fan is broken.

    Thank you and best regards,

    Stephen - Myrtle Beach, SC

    Strange things happen when power flucuations or failures occur.  Most probably the motherboard has been damaged by the PPE and that is normally not as repairable by a DIY.  If you could find a newer BIOS, that to solve the problem.  Since there can be no more recent BIOS, try to remove the battery from the motherboard for the night and then put the file in and reset the BIOS to see if that helps the default value.  Otherwise, it might be repairable.

  • Re: Auto Turn Off after inactivity

    Hello

    Toshiba Satellite Pro L500

    Where can I change the settings to know how well before the computer turns off after a period of inactivity?

    Thank you

    Choose change settings in "Power Options." You can see several option there.

  • ReadyNAS 104 unable to boot after power failure

    Hello

    My Readynas 104 unit is in a suspended state. Power blue led continues to blink (for hours) when I restarted after a power failure. The disply screen says "READYNAS 6.4.0" and no button works. I can only remove the power cable and connect back to try again to start, but even once, he ends up in the same State of the Power LED flashes continuously.

    Device answering queries ping but actions / iSCSI and admin page not available.

    Someone of you has faced this kind of problem or can help me solve this problem without losing any data please?

    Thank you

    Hussain

    I want to contact support.

  • VMTMS not showing running, not installed, VM TCS after power failure by giving two fake ips

    Nice day

    In fact, we had a power failure at our DC and after restarting servers, 2 of them you have the problem.

    UCS after the beginning of the VMTMS v 14.4.2 showing in summary "does not installed ' and no Ping able.but I can access Internet by IP however.

    TCS giving 2 Fake ips also.

    I just checked our vTCS, it shows only a single IP address.  If the server has more than one virtual nicinstalled, you can probably remove the sound that shouldn't be there.  Although I'm not a VMWare administrator, so I can't say for sure, comparing what has my TCS.

    Note: Your question would be better in the telepresence of the forums section, where these devices are discussed more actively and people can help you get the answers you need.  You can move your question to the appropriate section by editing and modifying the categories at the bottom.

  • Error code 10 cannot install Maxtor 3200 after power failure

    Original title: maxtor 3200 code 10

    After a power failure cannot not re install Maxtor 3200 get response Code 10

    Hello

    The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

    I suggest you run the FIXIT from the link below and if it helps. You can also follow the manual steps and check.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    http://support.Microsoft.com/kb/943104

    Hope this helps and keep us posted.

  • Reference Dell R710 does not start after power failure

    Hello, I tried to find answers on the forum but nothing so far

    I have this R710 at home that I use as a media server, it was working fine before a power outage the other night (no I don't have a UPS :-(

    When the power returned, I noticed one of lighting power supply has been turned off, so I took it out of the unit, but the unit still won't turn.

    I still have a so-called good food because the small green LED on the motherboard lights, and I can access the iDRAC, this feature, I didn't before the net Searchin' for answers, I'm kind of a novice with the servers.

    When I access the iDRAC, on the power supply page, I see nothing, no power supply listed.

    Is it possible that a diet might be "half bad", enough to work the emergency circuits but not the power outlet?

    Symptoms:

    Camera lights.

    Can access the functions of the Idrac, but doesn't do anything if I try to activate it via the tasks "quick launch".

    Power supplies are not visible on the pages of the Idrac.

    Display before work.

    Server was very well just before a power failure which took one of the PSU

    The remaining 870 PSU has the green light on, and the fan works for 2 seconds every time I cut the power it.

    Thanks for any help.

    OK, well... no answers.

    I found a place locally that sold a diet so I arrived with my server, I told them I would buy the power supply that I confirm that the fault was in fact the power supply.

    Well, you know, the unit started correctly with the new power supply, now in IDRAC, I see both power supplies but on that faulty, he reads "present, entry lost.

    So the answer is YES, a power supply may be defective, even if the green light is on.

  • ESX error after power failure.

    Hi all

    I am desperate because this weekend we had a power failure and two of our ESX VM cannot start.

    E-mail error is "cannot open the disk...". »

    Reason: Error handler e/s no valid.

    What can we do?

    A big thank you in advance.

    Check your store for data, the VM configuration, disk descriptor (hard) or anything related to your storage space.

    You can try to create the new virtual machine, add new vritual disk to existing aid & turn on the virtual machine...

    VMware newbie...

    Zen Systems Sdn Bhd

    www.no-x.org

  • Cannot take possession of the two machines after power failure

    Greetings...  Recently, I experienced a power failure to my office when I was running two different virtual machines.  After the reboot, I am unable to connect to machines like VMWare tells me "this virutal machine seems to be running."  If I press the button "Take Ownership", he immediantely is back with a dialog box saying "Appropriation of this virtual machine failed."  How to unlock these machines?

    Thanks in advance

    Jason

    Hello

    First stop of VMware Workstation, then go and have a look at the folders where are stored the your virtual machines.

    It is likely that you will see some .lck .lock files or folders. Which ones you will see (lck or lock) depends on the version of your VMware product.

    Delete these files (move them to another folder if you are more comfortable with it), and then return to VMware Workstation.

    Reopen the virtual machines and chances are big enough to make them work as they used to be.

    Good luck!

    --

    Wil

  • No sound on Satellite a series after power failure

    I had power failure and displays now the peripheral output put no audio.

    I have tried the drivers but not find.

    Any help please

    Is what model? PSA? -??????

    The audio chip may have been damaged due to advanced/power surge, requiring a motherboard replacement.

    Search for C:\TOSAPINS audio driver or download the driver here http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    You can also try a fresh install of windows. back up your data and run recovery now zero for the market. If the audio still does not work, then its most likely a hardware problem.

    Also update the BIOS, but I doubt that would help.

Maybe you are looking for

  • HP LaserJet 1536dnf print, pirouette

    Hello Expert, At our office, we have a printer model HP laserJet 1536dnf that link as a local printer so that the laptop has the following specifications: Windows 7 x 64, 8G OF RAM Graphic AM 1 G 1 TB hard drive This has recently sturdiness with the

  • T520i CPU groan with adapter 90 w only

    Hello I have improved my 4239CTO of i3 - 2310M to i7-2860QM T520i. Since my 65W adapter (US plug) couldn't run i7 at max power, I bought a used 90W (EU plug, 3-wire) adapter. Using the new map, I can hear the so-called "CPU whine" on the left side of

  • The disc you have inserted not readable by this computer. What?

    I have been using an external hard drive (usb) for a few months. As I was falling images to save the disk I got an error that the disc is not readable. I have important files out there that has not been supported until a second source, how to make my

  • HP compaq dc5800 sff: install a new graphics card

    Hello I bought a 240 r7 radeon graphics card to upgrade my hp dc5800 sff, it is running on the q33 chipset from intel. How to install this new graphics card? I want to talk about the installation of the drivers, not the placement in the pc itself. I

  • Cannot open program Windows and internet explore

    I have windows vista, this morning I searched on the internet firefox then suddenly something about malware appear and asked me to delete and then I clicked it. After this happens,I can't open internet Explorer, when I clicked on the icon of internet