UILoader question-different sources, but the same content appears. Why?

Similar Questions

• A target table is in charge of two different sources but the same columns, but a source is one database and another in a flat file.

  We all hope you are doing well.

  I have a business problem to implement in ODI 11 G. It's here. I'm trying to load a target table from two sources that have the same column names. But a source is to the file format and the other is in the Oracle database.

  That's what I think I'll create two mappings in the same interface by using the Union between the sources. But I don't know how the interface would connect to different logical architecture to connect to two different sources.

  Thank you

  SM

  You are on the right track, all in a single interface. Follow these steps

  (1) pull model of your data in the designer of the source file and your table model target to the target pane.

  (2) all relevant columns map

  (3) in the source designer to create a new dataset and choose as the UNION join type (this will create a separate tab in the source designer pane)

  (4) select the new dataset tab in the source designer pane and pull your source oracle table data model in the designer of the source. All columns that are relevant to the target card

  (5) make sure that your staging location is set to a relational technology i.e. in this case the target would be an ideal candidate because it is where the ODI will organize the data from source two files and oracle and perform the UNION before loading to the target

  If you want to watch some pretty screenshots showing the steps above, take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

• Sales order form, line status code is displayed as "WITHDRAWN". but the same code appears as "AWAITING_SHIPPING" for the same line in the database. can you please explain, where the value in frontend comes? It differs from the flow_status_code in oe_or

  Sales order form, line status code is displayed as "WITHDRAWN". but the same code appears as "AWAITING_SHIPPING" for the same line in the database.

  Where the value in the frontend is filling?

  It differs from the flow_status_code in oe_order_lines_all?

  Thanks for the correction.

  He slipped right out of my mind!

  Here is a detailed explanation of this case:

  Status of orders picked and picked partial

  Kind regards

  Bashar

• Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Why I get two files with different names but the same image when I save in 2015 CC Photoshop?

  Try resetting the PS preferences - Preferences in Photoshop

  ~ Rohit

• Copy from HDD to disc results external hard of different sizes but the same number of records

  Backup hard drive to external drive, 800 GB in total. When finished copying the file on the external drive size is smaller than 40 GB, but there is the same number of records.

  Different disks often present of thisdue fragmentation on each disk and the differences in the block sizes used on each disc. As long as all your data are present then there is no need to worry.

• How can I change an application to use another library with a different name but the same name for public (easily)?

  When you perform comparisons between the programming approaches I create two libs with the same public calls but different internal components. Nothing special there. Unfortunately when I pass my test app to a lib to another, the application loader asks an all audiences of vi. But I thought I read somewhere that the application loader would get the idea where to look after that I saw the first public call to the new lib. Doesn't seem to work. With the help of 2010.

  Pull the lib not used out of the machine. Rename the current library under the same name that you used. Project save everything. Close to LabVIEW. Remove the current lib. Copy the another lib to the machine. Not necessarily easy but here's how I did similar exercises in the past.

• Profiles of lenses for different organizations, but the same sensor size?

  I downloaded LR 4.1 RC today.  Some of my lenses are not explained in LR so I downloaded then Lens profile Downloader Preview 3 to see if there are all the profiles available for download.  For some lenses I found profiles, but they did not go on the same body I have (same sensor size however).   Can I use profiles for the lenses if they are for a camera body that is different from mine, but always the same sensor size?  I know that with a lens profile LR auto corrects distortion, vignetting and CA.  That will work if my body is different from that of the body used for the profile of the lens?  Thank you.

  Yes it is possible.

  I downloaded it with Adobe Lensprofile Downloader

  In LR, I choose it bonded.

  I have the Panasonic Lumix G 20 mm f 1.7 ASPH on Panasonic GF1

  and the available profile is (same lens) for Panasonic Lumix DMC - G3.

  Works very well.

  Frans

• I need several Web sites with different models but the same data. (Headers and footers different no body)

  I use Dreamweaver 20141. I do it literately tons of sites and each has hundreds of pages, so I need a way almost drag and then just change the links which would make things go a lot faster. Data or the body is going to be the same as the model data.

  Use the SSI (SSI) to put the code of the repetitive content body in a separate include file.

  Build your various pages with unique headers and footers, and then "call" content with a PHP link.

• Illustrator 282C pantone color numbers different for example RBG, CMYK, Web color compared indesign colors and photoshops which has the same values of color for the two C. 282 I typed in a different color and the same issue. Why would it be different in a

  This is illustrator

  

  It's photoshop

  

  Libraries are the same? The two RGB colors are different and they have different look on the screen.

  None of this has to do if you are not working with color management and conversion of spot color to a CMYK process color, which seems to be the case here...

  Mylenium

• How can I use notifications to send data from different sources for the same chart?

  Hello

  I use the model of 'Continuous measurement and logging' project comes with LV 2013.

  It is extremenly helpful in understanding the messaging between the acquisition, graphic and loops of newspaper. (Thank you NEITHER!)

  I ran into a snag though.

  I want to change so that my graphic loop receives notifications of data from two sources of acquisition by the declarant.

  I have trouble getting the data from the two sources to display on one graph.

  I've isolated the problem in the attached vi.

  Here's what happens:

  1. I create 2 parallel loops data and send the data to a third parallel loop with the notifiers.

  2. the third loop receives data from one of the loops because one of the authors of just receiving notifications is to expire instead of receive data.

  Can anyone suggest how can I fix?

  Thank you.

  -Matt

  Here's my modification of your VI. I put notes on the block diagram to explain the changes. He uses a queue for data transfer to avoid data loss. It uses a notifier to stop loops. All local variables and value property nodes have been eliminated.

  The way loops are arrested probably let some data in the queue. No more of one or two iterations of each of the loops of data acquisition. If you need ensure that all data has been displayed (or recorded in a real application), then you must stop acquiring loop first and read the queue until you know it's empty and both other loops stopped. Then stop the render loop and release the queue and the notifier.

  Lynn

• Combine data sources with different granularity in the same fact table?

  I have two operating tables 'Incident (157 columns)' and 'unit (70 Colums) '. For all the "incidents" happening there could be one or more records in the table of the 'unit '.
  
  As part of my design of data mart, I have merged the tables in one "makes the incident (227 columns)" and insert records from two tables with a join condition between them [incident. IN_NUM = Unit.IN_NUM].
  
  Is this correct, is my question? or am I mix data sources with different granularity in the same fact table. Appreciate your help.
  
  Best regards
  Bees

  Bees,
  Are the measures of the 'Incident', repeated during an incident given, in more than one record in the table of the unit? If so, then the sum (indicent.measure) will give an incorrect result?

  What is there to merge physically tables set outside OBIEE? With OBIEE you might have a table of 'facts' logic to present the user with report, which from tables separated units and Incidents and would stop the occurrence of incorrect aggregations. A common piece of modeling in the same way would be arrested in OBIEE headers and lines of command, quite common to have a logical fact 'orders' which contained the two header orders and order line, this translates into the Incidents-> relationship of units.

  To do what I mentioned, is relatively simple, you need a "Dim - Incident" at two levels, unit, mapp and Incident unique identifiers as keys to level and then use these levels to define the content of the levels correctly in your 2 tables logic sources logic "done", IE the LTS Incidents at incident level LTS units as level of units.

  Hope this helps, let us know if you get stuck.
  See you soon
  Alastair

• Clip of MultiCam, but with audio from SEVERAL sources at the same time?

  I recorded a seminar using several audio and video sources. Audio sources include a wire tie, room microphone and read directly from a computer.

  I got all the raw materials imported into FCPX and created a multicam clip, and everything is synchronized perfectly.

  For the video, I know how to make the cut between my different cameras.

  But for audio, I would be able to play several audio channels at once - namely, lapel mic and the mic to the audience. How can I do this?

  I know I could put the multicam audio clip: setback (for example) then also drag the microphone to the audience for the game. But that means every time I make an edit, I have to make it through two sources and must be absolutely sure that they fall never out of sync.

  I guess I could drag the multicam clip in the timeline twice (one above the other, so two are playing simultaneously), with a video source set to none. But the same problem - I always have to be very careful with the changes, two parallel versions never move out of sync.

  Is there a better way to do it?

  There are also sometimes I can do some automation of the volume of the different channels... so everything what you are proposing, please keep this in mind.

  Thank you!

  In fact with a multicam clip you need not "stuff" to work with multiple audio. It has excellent support directly in the application.

  See Steve Martin explain this: https://www.youtube.com/watch?v=HE4FRDMJBS0

• content of the different session for the same session, CF9

  Two URLS:

  http://domain/zshowsession.cfm

  http://domain/institutes/Office/zshowsession.cfm

  The DOMAIN part is identical.  Same site.  Same server see

  The two files contain this code:

  < cfdump var = "#session #" >

  A poster this:

  

  The other displays this:

  

  You can see it's the same cfid and cftoken, but the session content is different.  It causes me problems.

  Someone is aware of any legitimate reason, why this is happening?  Maybe some configurations weird CF in the CFIDE or something?  I already checked the two relevant Application.cfc files (one in /, one in institutes) and there is nothing that changes the session.

  I fixed it.  The problem was that both Application.cfc files have different values for myIdName.  When I made them equal session data becomes synchronized.

• Reinstall Windows 7 on a different drive on the same computer - related issue of the license

  A license Windows 7 partners question

  Can I reinstall Windows 7 on a drive different than where I did the initial installation? I have to cancel registration of the software because the initial installation? If so, how this is done? I have to follow a special procedure for the installation of system 7 on the hot spare?

  The reason for my situation

  I decided to upgrade the operating system of my laptop Toshiba Windows XP to Windows 7. As it was my first time, I decided to buy a HDD replacement so that I'd be able to do a clean install of Windows 7 without compromising my data and programs on the old disk. That went well, but the data and previously installed programs that I had used for the years remained in the hard disk which has been deleted.

  Now, I would replace the new hard drive (on which I have installed Windows 7) with the original hard disk (which contains Wndows XP and all my data, all my programs). With that done, I would like to perform an installation upgrade of Windows 7 (on Windows XP). In order to make a second installation on another hard drive (but the same work) what I should do to meet the legal installation MS for Windows 7?

  Please let me know.

  Thank you

  Carlos Tavora

  Monday, January 27, 2014 20:37:16 + 0000, tetraethyle3 wrote:

  Now, I would replace the new hard drive (on which I have installed Windows 7) with the original hard disk (which contains Wndows XP and all my data, all my programs). With that done, I would like to make a * level of installation of Windows 7 (on Windows XP). order to make a second installation on another hard drive (but the same work) what I should do to meet the legal installation MS for Windows 7?

  In addition, there is no installation upgrade to Windows 7 from Windows XP.

  Yes, thank you. I missed that he had 'upgrade '.

  You must perform a new installation and reinstall your programs.

  It's the best thing to do, but the 'must' is too strong a Word. Allow me to
  mention the alternative (although I do not recommend to do so): make a
  two-step upgrade - first upgrade XP to Vista, and Vista upgrade for
  Windows 7.

  I do not recommend because it doubles the risk of problems. But one
  while back I've tasted, to check that it worked, and I got lucky
  enough to have any resulting problems.

• The different poses in the same psd file store

  Hi, I imported a character of fuse for Photoshop - now my question is: how to back up different poses for the same character?

  I watched layers, but it seems that this would require duplicating all active 3D - which means that I would not be able to update the character and then export it in different poses, I have set myself.

  After trying, it seems not possible to update a fuse character and these changes appear in Photoshop. I get another file with the same name in the library. Apparently the fuse does not recognize when there are two files with the same name and it seems not to be a dynamic link between the fuse and Photoshop. Perhaps there is a function in Ps similar to the function of sequences to replace or recharge in After Effects, but I don't the have not found.