Ultiboard v10

Similar Questions

• Internal matter on the placement of Vias on board four layers with TWO planes of Earth

  My design is a four-layer Board.  Surface upper and lower layers are for routing of traces and power.   Two interior floor plans (the preceding the other separated by an insulating layer) are for all ground connections.  Customer specifies that all ground connections to make for TWO inner floor plans.  When I try to place a via that will connect a trace on the outer surface to the ground, I'm not allowed to connect to more than one internal plan.

  I need to place vias completely through the Board of Directors and connect a trace in inner outer surface for TWO floor plans... Is it possible or assignment that will allow me to do?

  Ultiboard V10.0.144 running.

  Thank you

  Solved my problem.  Do inner Layer 2 the active layer, turn off all other layers.  Internal stressed Layer 2, r/c on the Properties tab copper box, click connected to the Net, drop-down list, choose DGND, apply, OK. Now place a via. R/c, choose Properties, tab, click on assume net, drop-down list, choose DGND, apply, OK.  via moment connects to the inner layer 1 so much inner Layer 2, b/c, the two are now associated with the net DGND.

  Beautiful - thank you...

• DRC error

  Ultiboard V10.1

  Each ultiboard design, I've done so far.

  Each copper bottem line I do gives me an error of the DRC.

  The object "Trace: Width(0.700000 mm) Layer(Copper Bottom) Clearance(0.254000 mm) Net(2B)"is on a layer that is not authorized by the network settings.

  But a colleague his computer: no error in the DRC.

  I have changed some settings, but I don't know where and when...

  All drawings DIND'T have this problem before.

  Hi Paul-a,

  You can select the relevant nets (lines) in the view of the worksheet and change the layer routing for them all at once.

• Vectors force to shut down

  Ultiboard V10.0, Power Pro,

  This question has probably been asked before, but is still annoying me,

  is it possible to disable the Force vectors at all times

  (I mean permanently while they appear not at all, once again, as I do not use this feature)

  the question also with check box rule ratsnest and design, but since these are complete once the circuit board is finished, it is less an annoying problem that Force vectors reappear whenever a file Ultiboard is open?

  does anyone know all the parameters in the registry of Ultiboard affecting this behavior?

  Multisim/Ulticap/Ultboard user for 10 years and more, help!

  Hello

  I get around this by changing the color of the black force vector, which is the same as the background color and I really don't have one notices.  Ultiboard will remember this setting if you start a new design, but if you open a file where the vector of force is a different color, it will take the new color by default, and you must change this setting again.

• Is it possible to edit the ultiboard log file (v10.1.1)?

  I made the mistake of removing parts of a design Ultiboard and will then mark them up a very different conception of Multisim. Now when I try to renumber all reference indicators and annotate back to Multisim, he wants to remove all items first and then make him renumber. It is with the version 10.1.1. Is it possible to edit the log file if it doesn't do the renumbering of part?

  Since this drawing took me 3 days to deliver, she really sucks if I start more can renumber parts.

  I thought that the answer would be no because I think they address this version 11. But I found a way to 'cleansing' of the log file. I created another design, just copied and pasted in the new design. At that time, I had the same exact design, with the same reference indicators and all traces of tact, but none of the nets. I've annotated front of Multisim and introduced all the nets without error. Now I have renumbered all parts and retro-annotation. He wanted to stick all over again but this time that Multisim just said "not supported - add part xxxx" which meant that there nothing done. But she made the reference of all changes of the indicator. Yay. Even if she was in trouble with multi-sectioned parts. He would get a right door, but the rest would be something different with "xx" in the reference indicator. As "Uxx6A". So all I had to do by clicking on the parties and select 'replace the component' and it will show the indicator just with a single gate used and I just had to select the same door.

  So problem solved.

• Unable to access the Ultiboard of Multisim part prints Assistant

  I have re-installed the design of circuits Suite on a new PC (I got active v10.1.372 on the old PC), I have 10.1 on the new PC. I made an EWPRJ file with all made previously. I added each party, through selection, to the Ultiboard database. When you try to bind the new parts of Multisim to prints of not in the Ultiboard database, the prints do not appear for selection. Is there a work around?

  Thank you, Tod

  Hi Tod,

  I have a solution for you. During the creation of components, choose a comparable space in the master database. When you transfer the design to Ultiboard, you can select the form and go to tools-> change the shape. This will allow you to choose the correct form.

  I hope this helps.

• I've just updated v10.11.6 El Capitan and my Outlook for MAC 2016 continues to crash is there a solution?

  I've just updated to v10.11.6 El Cap 0 - my Outlook for MAC 2016 v15.23 (160611) - since the update, he hangs up randomly and must be restarted.  Is there a fix for what is available?  I have not yet tried my other apps O MAC 2016.

  Have you tried Microsoft Office updates? They could of released a compatible update as a result of office automation of 2016:

  tically-bfd1e497-c24d-4754-92ab-910a4074 https://support.Office.com/en-us/article/check-for-Office-for-Mac-updates-automa...

• Since the last Mac OS El Capitan v10.11.6 - The newspaper Mac update off after 1 or 2 minutes automatically

  Information material:

  Model name: MacBook Air

  Identifier of the model: MacBookAir6, 2

  Processor name: Intel Core i5

  Speed of the processor: 1.3 GHz

  Number of processors: 1

  Total number of cores: 2

  Cache level 2 (by heart): 256 KB

  Level 3: 3 MB cache memory

  Memory: 4 GB

  The boot ROM version: MBA61.0099.B22

  Version SCM (System): 2.13f15

  Serial number (System): C02KV24PF5V8

  UUID of the material: 4FC8F223-8B32-5A4B-894F-59227DF21FC1

  Since the last update of my Mac Book Air on OS El Capitan v10.11.6, Mac log after a few minutes, I don't have time to type something on my mac and I'm back to the log on screen.

  This does not happen when I get time to look for something in Chrome, but it does not make sense to me.

  Automatic log is set to 60 minutes.

  Hello, MAXZ,

  Thank you for using communities Support from Apple. I know having your unexpected log of MacBook Air, it's not what you expect. Based on what you said, I would use these steps to identify and fix this software with your MacBook Air:

  1. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. After the boot safe mode, reboot normally and test your question again.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  2. you can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  How to test a question in another account on your Mac.

  See you soon!

• after update to v10.11.6 my hotmail login is not recognized

  After the last Maverick v10.11.6 update my hotmail login is not recognized.

  What happens when you try to connect to and where are you trying to connect?

• Why does v10.11.6 start so slowly?

  Why does v10.11.6 start so slowly?

  Your computer have an SSD or hard drive? A spinning hard drive is much slower and can cause slower start-up times. Can you estimate the time required to start-up?

• What is the difference between firefox v10 and v17 ESR ESR? Thank you.

  Our users would like to migrate to migrate to ESR currenct V10-v17, so I need to study changes to ensure that our application works perfectly

  Hello, you can refer to this wiki article: https://developer.mozilla.org/en-US/docs/Firefox_17_for_developers & work your way back up to 11 Firefox for developers...

• How can I tell if my Mac has been hacked v10.10.5

  In 'Window leave Force', there is a flashing line in and out very quickly it was something like: applekit txt... {code

  I have a Mac Book Pro (2013) v10.10.5 with all the updates that are loaded.  My laptop was running a bit slow... freezing for short periods of time when you save a document or work in Photoshop. I moved a large number of my large video files to a backup disk to ensure that I have a lot of space. After the restart, I had that Chrome and Photoshop and Finder running. In the FINDER, I clicked on FILE / NEW WINDOW FINDER and saw the Rainbow Apple "Spinning wheel" for more than 30 seconds while you wait for a new Finder window open.

  More and more impatient, I clicked on the icon Apple and "force quit." In the window to leave, I saw three running applications but also saw a line of red text jump in, then disappear very quickly a few times. I tried to take a screenshot, but couldn't.  The only thing I could catch was something like applekit .txt... {code and that's all I could catch.} I disconnected from the internet, and he stopped.

  You have reason to believe that your mac is hacked?

  Have you recently installed any software suspect?

  Do you have a person with access to your mac that can install something without your knowledge (which requires an administrative password and the access to the system)

  Apart from that you run any type of Mac anti-virus. If so most, if not all have been cited on these forums as points of failure on the Mac and in many, if not all cases of withdrawal of restores them the response and the functionality of the system. Well-known companies AV display the instructions to remove their products. At this time there is no known Mac viruses in the wild, which means no laboratory of titles in the world posted of any finding of a Mac virus that did appear on the internet at this time, please do not confuse this statement with the absurdity of "Mac cannot get viruses.", what I mean , it's "they don't seem still one and mac AV is not nearly as flexible as it is counterpart windows and has been known to cause serious problems and not offer a lot of protection.

  Secondly you are running any 3rd party utility system or network, once again, these products are known to cause problems and are not only necessary are often contrary to the OS X, remove them from your system.

  If you are not sure what you are using please post a report of etrecheck for the volunteers here to look further as to what your system is running, this report contains personal or confidential information. the software was developed by a long time member of this forum in the first goal to help mac users to isolate a problem in their system and has been very successful in doing this, an overwhelming majority of positions where he asked attests to that.

  https://etrecheck.com/

• CTRL-SHIFT-click to open the link in a new tab (v10)

  I came back to Firefox recently after trying to use Chrome for a while. I welcome my return, except that in the update of v9 to v10, I found one of my favorite keyboard shortcuts no longer work as he had.

  In v9 and precedent, Ctrl-Shift-click opens a link in a new tab and switched to it immediately. V10, Ctrl-Shift-click still opens the link in a new tab, but does not pass, even with Options: tabs: when I open a link in a new tab, switch to it immediately enabled.

  When you use the mouse to open a link in a new tab, it switches on it immediately as expected.

  I thought I was going to have to live with it (or not), but then to find some documentation noting that Ctrl-click now offers the functionality I was used to.

  Great! However, backward compatibility with old features could save me some temporary disappointment and some additional research.

  BTW, I noted in another post several of the reasons why I returned to Firefox from Chrome.

  Two key combinations seem to work in Firefox 8, 9. and 10 for me.

  Change when I open a link in a new tab, switch to it immediately from disabled to enabled reverse functions {Ctrl + click} and {Ctrl + Shift + click}.

• Home page layout would not work in v10 or v3.6.26

  I cannot set up my homepage, it couldn't do in v10 or through tools/options (on my site that you want and clicking on page current use or by dragging the icon above the little house as directed.) My program of the home page will not work with v10 so I uninstalled and installed v3.6.26. I can't put my homepage with it either, even if I click current page and hover over the House. the House will show my page selected, but when I close and reopen, it keeps going back to the search, by default. With the help of XP, SP3

  See the pages on searchqu and these discussions:

  • [816181/questions/816181]
  • [790833/questions/790833]
  • http://bit.LY/searchqutoolbar
  • http://www.ilivid.com/FAQ.htm#8

• V10 is slow and crashes, how to downgrade to v9 for a browser to work again?

  I just got the v10 install automatic update of Firefox. It is now very slow, often hangs for long periods to 100% of the CPU, cannot be interrupted. I can't click on buttons or links for 10s of seconds after loading a page. Now, it is essentially a non-interactive application.

  Decommissioning is not recommended in ordinary situations. Currently with Firefox 10 automatic updates suspended which might be an exception, but if there is an emergency chemspill release you an update, then miss out on that. Advanced users can consider installing multiple versions of firefox, a simpler method would be to install firefox portable 9 as an additional browser to use for the next few days while trying to investigate everything crashes and in the meantime all revised more to upgrade to a newer version of Firefox 10.

  • See install an older version of Firefox
  • Keep also look for info update latest Firefox issues and possibly/forums/contributors/708122
  • Firefox crashes or does not - how to fix
  • http://PortableApps.com/apps/Internet/firefox_portable#legacy
    even if you install portable 3.6 is an additional work supported firefox browser

  change
  
  In fact, firefox portable 9, reasonably; don't not more easily available, as it is now an unsupported version.
  (I also sent you look at Private Message inbox)