ultimate panoramas and sony built in webcam not working not

Sony does not offer a driver for the webcam because they do not justify the upgrade. There is another material that I could use to make it work?

Hi new sony1,

I'm sorry to hear that. Then your webcam would not be supported in Windows Vista Ultimate Edition, hopefully Sony will at some point put out a driver for it. For now, you can try Virtual PC. It is free to download and you can run a different version of Windows Vista inside and use your webcam from there. For more information on Virtual PC 2007 pull on the link below:

http://www.Microsoft.com/Windows/products/winfamily/virtualpc/default.mspx

Brian
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • SAMSUNG RV510 laptop computer and the built-in webcam was working before and now, if I have the webcam the screen is in night vision which is entirely green.

    I have a SAMSUNG RV510 laptop and the built-in webcam was working before and now, if I have the webcam the screen is in night vision which is entirely green. I tried to restore and re - install the drivers and even removed the chip back and webcam is plugged in but nothing works.
    Please give me a solution for this.
    Thank you

    See its unlikely a MS or Win, Samsung help/support solution or their forums, its their equipment and their program

  • I've upgraded to Windows 7 Ultimate and now my system does not connect to internet and my built in webcam does not work.

    help please

    I tried to upgrade the verson windows seven that came on my computer vaio to windows 7 Ultimate edition. now I can't connect to internet, my built-in webcam does not work, the menu drop-down selector top of page disappeared and I do not see where there is no improvement in the operating system. That's happened?

    This thread was created in the Windows Update forum.  The moderation of Microsoft answers team has moved to forum installation, upgrade, and activate.  Thank you.

  • Built in webcam not found on the computer.

    Hi, back for a while that I had to have it replaced my computer screen. After that it has been replaced, my webcam not working not. He said that there is no webcam. Before that the screen had to be replaced, it works beautifully. What could be the problem and how to fix this? Thank you for your help.

    Hi Randalynf,

    Please answer a few questions to refine the question.

    1. What is the brand and model of the computer?

    2. When you say "screen is replaced", hear you screen has replaced for a new one? What was the exact problem with the monitor?

    3. what happens when you try to access with the Webcam software that came with the computer?

    This problem normally occurs when there is no problem with the driver for the Webcam device software.

    I suggest you follow the steps below to see if that helps.

    Method 1:

    Step 1: Find material webcam

    Take a quick moment to visually inspect the top of the screen of your computer. Look closely, you should see a small lens at the top in the Center, if your computer is equipped with a webcam. Some models do not come with a webcam and the area where the webcam would normally be resident is replaced by a small plastic cap.
    Often, there are small holes near the top center of your screen. These holes are for the microphone or other sensors and do not contain any webcam.
    • If your computer lacks a built-in webcam, you must use an external USB webcam.
    • If your computer is equipped with a built-in webcam and you can't use it, go to step 2

    Step 2: Find and use the Webcam software that came with your computer

    Try to access the webcam that is preinstalled on your computer.

    If you can't find and open the webcam for your computer software, then go to the next step.
    If you have found the software of the webcam and it opens and you see a picture, then finished. Your webcam works.
    If you found webcam software and it opens, but you can't see the video in the main display window, restart the computer and try again.
    If the problem persists, use the troubleshooting section "video does not appear in the webcam software.
    Method 2:

    If you are able to find the Webcam on your screen and you cannot view the video using the software installed, you may need to update the Webcam drivers for more later.
    Read the sections "If you have problems with your webcam' in the article and check the results.»

    Hope this information helps. Response with status so that we can help you.

  • built-in webcam not detected on the XPS 17 (L702X)

    8.1 Windows 64-bit, the built-in webcam does not appear in Device Manager. Any software that uses webcams does not detect the webcam. He worked until recently. Drivers & downloads in support Dell offers no help because no driver for the webcam. It seems to be a bit stupid because he recommended me to install some things already installed. Or even a few years nVidia graphics card controllers! 'My Dell' application does not offer the posibility to test the webcam, just the microphone. Therefore, none of the solutions I've read here are of no help.

    fjmv,

    Recently install you / reinstall the operating system? If so, have you installed the Dell System Software (if applicable) and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

    Windows 7/8 is supposed to provide the drivers of webcam for most Dell computers. If you system needs webcam drivers, go in driver downloads & enter your service tag, and then select your operating system. If your system is in need of drivers for the webcam, they will appear under entry.

    (Windows 8) How to make the webcam work with the help of this youtube. You must open the firstcamera app, and then click settings in the charm bar to see where you can give the app permission to use the webcam.

    Try to read...

    Troubleshoot the Dell Webcam and the Dell Webcam Central software

    You can try this file, also known as the Dell Webcam Central.

    Create a new unrestricted user account and try the webcam. The webcam worked?

    If Yes, sign out and sign back in to your account and try the webcam. The webcam worked?

    If not, then the webcam is detached from the motherboard, usually close to the webcam

    Rick

  • built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

    I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

    Any help to fix this would be greatly appreciated.

    Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

  • Built in webcam not working not

    I have a HP Pavilion dv6565us. It came with Vista Home Premium 32-bit, but I have upgraded to Windows 7 Home Premium 32 - bit. And it has been working well. But recently my integrated webcam has stopped working. It worked fine before with Windows 7 and the last update, but after any changes to the OS or whatever it is he has stopped working. No matter what program I use either doesn't recognize the presence of the webcam or shown as an option for an input device but does not work.

    I did all the solutions I found during the search of similar problems and none have worked. I did few things about updating and reinstalling the drivers, I have spent in my device manager and uninstalled and reinstalled all USB root hubs. I even updated the BIOS for my system.

    The only time it appears to the top is when I go to devices and printers from the Start Menu. The strange thing is, he showed, missing from there and again highlight.

    When it shows up, I go to properties and it says that the device works properly, is not. In the box where it says model number, it says unavailable.

     

    In the details section, there is a whole list of properties. There are too many post in a thread. But if you need to know an any of them, I will post them.

    Hello

    If you updated the drivers and BIOS and the camera don't work there is probably a hardware
    issue. Maybe a bad connection or the camera has gone wrong. Do check it out to a real computer
    Shop (not of leeks and glances at a BestBuy or other stores BigBox) or HP support.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    ================================================================

    I see where the camera has beed works on Windows 7 however is it really compatible with Windows
    7? Below are methods to check and update the drivers that could help even if you have
    tried to do the same.

    You run the Windows 7 Upgrade Advisor to make sure that your system will work correctly on Windows 7?
    And check with the Compatibility Center (for the main devices).

    Windows 7 Upgrade Advisorhttp://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

    Windows 7 Compatibility Center
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Also check with the manufacturer of the system's support and their forums (if any). ("Can" have help
    upgrade your system to Windows 7.)

    ============================

    If the system and the camera will run on Windows 7 and Windows 7 drivers for the camera.

    Vista references apply to Windows 7.

    You probably need to recharge the device drivers and any software control of the'IF' camera, there is
    everything for Windows 7.

    Login as an administrator.

    Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
    on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
    is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
    will update the driver stack.

    Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
    software (if not more recent get the same).

    Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
    to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Then let windows updates on however prevent loading of drivers who are often older than the
    those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
    really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Built in WEBCAM stopped working. Also get the CODE of ERROR 8OOBO100 with Windows Update

    have bee away on vacation for 5 weeks came back and cannot get my webcam integrated in Dungeon is said to turn on the camera, working also get erroe code 800B 010 for a update

    Hello

    for integrated webcam problems looking for the latest drivers and software from the manufacturer of your laptop

    or ask in their forums

    When you try to install the updates on the Windows Update Web site or the Microsoft Update Web site, you may receive the following error message:

    0x800b0100

    http://support.Microsoft.com/kb/956702

    or repost in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • Built-in webcam bent works on HP ProBook 4520 s product number: WH300UT #ABA

    Hi, I have a HP ProBook 4520 s running Windows 7 Professional 64-bit, the number of product WH300UT #ABA. I had tested my camera one day before the trip June 30 and found that it worked very well, however several days after their arrival I used for the first time and found that it only shared no video on the Facebook video chat. I went to Skype to find a similar situation, it identifies the device that is used, but it doesn't send any video. Finally, I checked in her Arc Soft Total Media Suite to see if I could take pictures, once more he identified the connected device and yet nothing was displayed, not even pure black and the buttons to capture and record are grayed out. I made no changes since the last successful use, as far as I know to my system other than the installation of a new mouse and windows updates. I would appreciate help, thank you.

    Hello MADmanHP,

    Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

    Good luck!

  • SONY Vaio built in Webcam not working do not [VPCEB36FG]

    I have a sony vaio VPCEB36FG, the webcam is not detected. It has stopped working. Also there is no "imaging devices" option in the list of system hardware. every time I have arcsoft companion satrt this appears message in the frame "a webcam was not found or does not work properly" Please help me with this problem, thank you

    vinayak0406,

    Try Windows restore to restore again at an earlier date where he worked for you.  It is possible that you may have a bad connection or a faulty unit requiring repairs...

  • Motion Eye built in webcam not working not (VGNNS140E)

    Hello

    I have a VGNNS140E and the problem is that my webcam has suddenly stopped working a few weeks ago. It did not work properly for a long time: I think that since I installed Windows 7 64-bit OS (2 years ago) and reinstalled ArcSoft Companion 2. At that time he used to sometimes work while other times not. whenever it took place, he disappeared in the Device Manager.
    Previously, he had to just restart the system and the pilot would have returned, but now it won't. I have already uninstalled and reinstalled ArcSoft, but in Device Manager it is displayed in the other peripheral tab as a 5U875 device (manufacturer Ricoh).
    Vaio support chat, told me to run a system recovery, but it did not work.
    I would get this specific for Win7 x 64 OS device driver, because I've not found on Sony eSupport. In this forum, I found many other customers who have the same problem, but with different models of webcam and laptop computer.

    Additional information:
    VGNNS140E, running Windows 7 x 64 OS version 6.1.7600
    Device to Ricoh co. Ltd. 5U875
    Hardware ID:
    USB\VID_05CA & PID_18FF & REV_0100
    USB\VID_05CA & PID_18FF

    #2 additional info:
    Windows 7 Ultimate x 64
    VAIO VGNNS140E model PCG - 7141L

  • HP built in webcam not working not

    I have a laptop HP with windows 7. IV had it for about 4 months now. It works today and my webcam is not working... iv tried various things of the other forums, but nothing seems to work... IV checked for updates... the webcam does not work on cyberlink youcam or Skype on Skype the other person can see me, but I have just a black screen. Help, please...

    You must visit the HP support, or their forums - HP software/hardware

    You should ONLY update drivers of HP and NOT windows Update support

  • Lightroom v. 3.6 and Sony A99 RAW does not match

    I recently bought the new Sony A99 camera, but it seems that l.v. 3.6 does not support this (new aparently) type of RAW images.

    What I have to buy the L.v.4 or can I use c. 3.6 with change some settings?

    Thank you

    If you want to stay with raw files, either switch to Lightroom 4 (4.2 or later is required) or you can download the free Adobe DNG Converter and convert your raw files to DNG, which would then be recognized by your current version of 3.6 LR.

  • Compaq 515 built in webcam not working not not on Windows 7.

    I went to MSN, and when I sent the invitation, he said that I have a webcam so I went to tools and also, it said I didn't have a webcam. So, I disconnected and went to add/remove programs and I saw that HP webcam was there for that means that I have the webcam installed right? I don't know how to solve this problem.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > looking for the latest Windows 7 drivers > download/install them.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to / stationed there.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Built in Webcam not working not not on HP Pavilion Notebook PC g7

    I have a camera on the laptop but I can't Camen. my (model) computer, the HP Pavilion Notebook PC on Windows 7 g7. Please help me. How do that you manage webcam started without any problems.

    Richard P.S.

    Computers laptops HP usually come, with integrated software which allows you activate the camera as YouCam software or another program which can use the camera like Skype or Windows Live Messenger.

    Seeing is believing: use a webcam to bring your Instant Messaging...

Maybe you are looking for