UNABLE TO ACCESS THE USER NAME PASSWORD

I AM the ADMINISTRATOR AND I HAVE SET a PASSWORD FOR IT.

ALL OF A SUDDEN, I CAN NOT CONNECT TO MY PASSWORD I CAN STILL REMEMBERED

LUCKY I HAVE OPEN A GUEST ACCOUNT AND I CAN CONNECT USING THE SAME PASSWORD BUT I CAN'T DEFRAG BECAUSE I NEED TO BE AN INORDER TO ADMINISTRATOR TO LOG THAT BELONGS TO ME.

I TRIED TO USE THE USB OR BLANK DISCS AND IT SAYS CAN NOT.

HOW CAN I GET IT AGAIN? PLS HELP TQ

Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your system repair CD. If you do not have one, ask a friend to burn you through the control panel / backup and restore. It takes less than five minutes.
  3. Press a key when prompted to boot from the CD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point when you were able to log in.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

By elsewhere, together write messages all uppercase is known as SHOUTING. Many respondents do not like being shouted at.

Tags: Windows

Similar Questions

  • Unable to access the user account

    I have an old computer, but it is always useful.  On startup, I get this message:

    "Windows cannot load the locally stored profile.  Possible causes of this error include insufficient security rights or a damaged local profile.  If the problem persists, contact your network administrator.

    DETAILS - an operation i/o initiated by the registry failed irreparably.  The registry could not read, write or flush, one of the files that it contains the image of the registry system. »

    What can I do to access my account and My Documents with all my stuff in it?

    Thank you very much!

    Try to find that the problem with the user account is probably not worth the time it would take. Restart the computer in Safe Mode. When you are prompted, choose to log in to the administrator account. Go to control panel > user accounts. Create a new account here. Name anything at random for now. Now navigate to my computer > C drive open > Documents and Settings folder. Your old user account. Now locate all records containing your files. Copy and paste them in the folder appropriate for the new account. Now delete the old account.  You can now change the name of the new account name you had in the old account. It is probably the best way to fix it.

  • How can I connect to Windows without using a guest account active or know the user name password?

    original title: access Windows

    How can I access my computer from the Windows screen when I do not have an icon of comments and it won't recognize my password?  I have Windows 7 on my laptop but Windows XP on the PC that I can't access.

    Unless you have added a password for the built-in Administrator account, you can use this account to log in and reset the password of other users or creating new users:

    'Forgotten your Windows XP Home password? "- Part 3: define a new password as an administrator.
      <>http://support.Microsoft.com/kb/894902 >

    HTH,
    JW

  • Get on my wireless network - I'm in the prompt for the user name, password, and domain

    I tried to connect to my home wireless network. with most wireless networks, I will ask you for a password and I can enter and connect, but my home network wonder with additional credentials, including username, password and domain. My home network does not work with all other computers that are used in my house. What can I do to connect?

    Hello

    1. try relative to wireless networking and make sure that you set the level of security to WPA2-Personal, as it is recommended. Follow the steps listed in the link below and check if that helps:http://windows.microsoft.com/en-us/windows7/Setting-up-a-wireless-network

    2 disable the software firewall and windows AntiVirus installed on your computer and then try to connect to the wireless network. Make sure that you turn on once connected to the network.

    3. you can also try the steps listed in the link below:http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-network-connection-problems (for Windows 7)

    4. run the built-in network troubleshooting utility, follow the steps listed in the below link for the same thing: using the utility in Windows 7 Network Troubleshooter:http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Diagram of authentication with user name / password stored in the Table of the App

    Hi all

    So far, all of our applications have used sign-ON, but I have now spread to allow users from outside of our Organization (and so not in our system OID) to use a specific application.

    So, I have a table in my application that stores the user name and password. I have a function that compares the input of user name and password at this table and returns a Boolean result. This function is then entered in my scheme of authentication as the authentication function.

    This works well and is causing no problem. The problem is that the password is stored and verified to plain text - not very good lie.

    How can I do to change the password of my table column, pages which allow the password to be updated, and authentication which checks the user name / password to use a form of encryption?

    Also, do I need to worry about all the other fields (Page Sentry function to check the authentication session, prerequisite process etc.) that the authentication scheme can offer me - or can I just leave these virgins as they are now.

    If someone can give me a complete "out-of-the-box" solution that would be wonderful - otherwise a good hard pusj in the right direction would be much appreciated.

    Thank you very much
    Martin

    Hello Martin,

    If you discover here the application of Discussion Board, you should find the information you need. This application stores an encrypted version of the password of the user in the table.

    http://www.Oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#Forum

    Good luck
    Don.

    You can reward this answer by marking as being useful or correct :)

  • Smartphones blackBerry how to change the user name of e-mail on a Blackberry Curve 9320.

    Dear community,

    I have a Blackberry Curve 9320. My company has recently changed their messaging system so I need to create a new e-mail account. Creating the account of electronic mail is not a problem. However. some settings need to be changed. When I go on settings, navigation key allows me to change the change the server info, type my password etc. However, I'm unable to change the user name. My device automatically generates a username of email that is not correct and I am unable to change because the navigation button jumps on this area. Can someone advise me on how a change the username of email on a curve 9320. Thank you.

    IT WORKED! Thank you very much. Force the unit to offer "I'll give you the parameters" was the thing. Have a great day.

  • Access PC after startup, password no longer works. "The user name or password is incorrect" message appears.

    My friend has an e-machine (8 months) with Vista Home Basic. She started this morning and typed his password and go: 'the user name or password is incorrect'.  She could not clear the checkpoint.  A few times there was a pause as if he was going to go on the desktop, to finish with 'the user name or password is incorrect'. Regardless of how many times she hit, the results were the same. Everything was fine the night before.  What are his options?
    My brother thinks that his computer may have a virus.
    Thanks for the review.

    Hello Triavatar,

    You can try this link: http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your problem of password easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for the video on how to use and for questions or you may need extra help. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • remote VPN and vpn site to site vpn remote users unable to access the local network

    As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

    The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

    ASA Version 8.2 (2)
    !
    host name
    domain kunchevrolet
    activate r8xwsBuKsSP7kABz encrypted password
    r8xwsBuKsSP7kABz encrypted passwd
    names of
    !
    interface Ethernet0/0
    nameif outside
    security-level 0
    PPPoE client vpdn group dataone
    IP address pppoe
    !
    interface Ethernet0/1
    nameif inside
    security-level 50
    IP 192.168.215.2 255.255.255.0
    !
    interface Ethernet0/2
    nameif Internet
    security-level 0
    IP address dhcp setroute
    !
    interface Ethernet0/3
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface Management0/0
    Shutdown
    No nameif
    no level of security
    no ip address
    management only
    !
    passive FTP mode
    clock timezone IST 5 30
    DNS server-group DefaultDNS
    domain kunchevrolet
    permit same-security-traffic intra-interface
    object-group network GM-DC-VPN-Gateway
    object-group, net-LAN
    access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
    192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
    tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
    pager lines 24
    Enable logging
    asdm of logging of information
    Outside 1500 MTU
    Within 1500 MTU
    MTU 1500 Internet
    IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
    ICMP unreachable rate-limit 1 burst-size 1
    enable ASDM history
    ARP timeout 14400
    NAT-control
    Global 1 interface (outside)
    NAT (inside) 1 0.0.0.0 0.0.0.0
    Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-registration DfltAccessPolicy
    the ssh LOCAL console AAA authentication
    AAA authentication LOCAL telnet console
    AAA authentication http LOCAL console
    AAA authentication enable LOCAL console
    LOCAL AAA authentication serial console
    Enable http server
    x.x.x.x 255.255.255.252 out http
    http 192.168.215.0 255.255.255.252 inside
    http 192.168.215.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    Crypto-map dynamic dynmap 65500 transform-set RIGHT
    card crypto 10 VPN ipsec-isakmp dynamic dynmap
    card crypto VPN outside interface
    card crypto 10 ASA-01 set peer 221.135.138.130
    card crypto 10 ASA - 01 the transform-set RIGHT value
    crypto ISAKMP allow outside
    crypto ISAKMP policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    crypto ISAKMP policy 65535
    preshared authentication
    the Encryption
    sha hash
    Group 2
    lifetime 28800
    Telnet 192.168.215.0 255.255.255.0 inside
    Telnet timeout 5
    SSH 0.0.0.0 0.0.0.0 outdoors
    SSH timeout 5
    Console timeout 0
    management-access inside
    VPDN group dataone request dialout pppoe
    VPDN group dataone localname bb4027654187_scdrid
    VPDN group dataone ppp authentication chap
    VPDN username bb4027654187_scdrid password * local store
    interface for identifying DHCP-client Internet customer
    dhcpd dns 218.248.255.141 218.248.245.1
    !
    dhcpd address 192.168.215.11 - 192.168.215.254 inside
    dhcpd allow inside
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    Des-sha1 encryption SSL
    WebVPN
    allow outside
    tunnel-group-list activate
    internal kun group policy
    kun group policy attributes
    VPN - connections 8
    Protocol-tunnel-VPN IPSec
    Split-tunnel-policy tunnelspecified
    Split-tunnel-network-list value split tunnel
    kunchevrolet value by default-field
    test P4ttSyrm33SV8TYp encrypted password username
    username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
    username kunauto attributes
    Strategy Group-VPN-kun
    Protocol-tunnel-VPN IPSec
    tunnel-group vpngroup type remote access
    tunnel-group vpngroup General attributes
    address pool VPN_Users
    Group Policy - by default-kun
    tunnel-group vpngroup webvpn-attributes
    the vpngroup group alias activation
    vpngroup group tunnel ipsec-attributes
    pre-shared key *.
    type tunnel-group test remote access
    tunnel-group x.x.x.x type ipsec-l2l
    tunnel-group ipsec-attributes x.x.x.x
    pre-shared key *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    Review the ip options
    inspect the netbios
    inspect the rsh
    inspect the rtsp
    inspect the skinny
    inspect esmtp
    inspect sqlnet
    inspect sunrpc
    inspect the tftp
    inspect the sip
    inspect xdmcp
    inspect the icmp
    !
    global service-policy global_policy
    context of prompt hostname
    call-home
    Profile of CiscoTAC-1
    no active account
    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
    email address of destination [email protected] / * /
    destination-mode http transport
    Subscribe to alert-group diagnosis
    Subscribe to alert-group environment
    Subscribe to alert-group monthly periodic inventory
    monthly periodicals to subscribe to alert-group configuration
    daily periodic subscribe to alert-group telemetry
    Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
    : end
    kunauto #.

    Hello

    Looking at the configuration, there is an access list this nat exemption: -.

    192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

    But it is not applied in the States of nat.

    Send the following command to the nat exemption to apply: -.

    NAT (inside) 0 access-list sheep

    Kind regards

    Dinesh Moudgil

    P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

  • I gave a comuter the person who owned it died. How can I change the user name and password?

    A few months ago, I gave a comuter the person who owned it died. The window indicates Micrsoft Window XP Professional-HP. My problem is that I do not have access on behalf of users and password. What should I do?

    Hello

    Many on this forum suggests that when you "inherit" a PC, you should do a clean install of Windows to delete the unwanted "baggage" that the previous owner has left behind. For example (but not limited to) viruses and criminal and illegal downloads. Such a procedure will reset all the passwords anyway. The PC may have a factory reset mechanism still intact. Visit the manufacturer website for more information, or we do know the number of brand, range and model of your PC for assistance.

    If you are using XP Home Edition, the built-in Administrator account probably doesn't have a defined password. You can start in safe mode, where this account will be selectable when connecting. It allows to connect and change the password of any other connection.

    To start in safe mode, keep hitting F8 twice a second after turning on the PC until you get the start menu where safe mode is selectable by the up/down arrow keys, and then press ENTER.

    If you are using XP Professional, try to connect using the built-in Administrator account. You don't need to do it in safe mode (although you can if you wish). If your normal login screen is a display of the user symbol and hit ctrl-alt-del twice to get to login to text entry. Type administrator as the user name and try a blank password.

    See also http://support.microsoft.com/kb/321305

    Other than the foregoing, this forum has a policy of unknown passwords

    http://support.Microsoft.com/kb/189126

    Tricky

  • User name password of the modem

    Original title: user name password

    Bought a modem and thought that it was all removed from the privous owner, but once I've implemented windows journal XP can get a username and password... it does not accept the than mine so I suppose he wants privous of the owner, have no way to know that. How can I get the computer set up.

    Thank you

    Bought a modem and thought that it was all removed from the privous owner, but once I've implemented windows journal XP can get a username and password... it does not accept the than mine so I suppose he wants privous of the owner, have no way to know that. How can I get the computer set up.

    Thank you

    It is a very confusing post.

    What do you exactly mean by "Windows XP log in"?

    You get the application a name of user and password when you are:

    (a) you try to start Windows,
    (b) attempts to connect to the Internet, or
    (c) try to access the utility to set up your "modem"?

    If (a), this has nothing to do with a modem.

    (B) or (c), and if by 'modem', you hear a modem/router combination, there is always a method to reset the default device.  Describing this method requires you that you identify the make and model of the device.

  • How can I change the user name and password

    I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

    However I don't know how to change the user name and password.

    I would also like to know how it works?

    We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

    If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

    The default user name and password so that the robot is root/vmware"."

  • How can I get automatic fill-in of the user name and password?

    It is similar but different from my previous question. On a computer when I open Firefox it opens automatically log me in my homepage (a Yahoo mail account). When I open a new tab in my gmail login happens with my already filled username. All I have to do is click NEXT and it goes to the login with my password information page. I can't get firefox my my other computer to do this. My homepage comes up with my informed user name, but I have to manually go through the login process. When I open gmail in a new tab, I can't do anything except: 1. press ENTER and get an error message, and then click in the user name box, or 2. Re - click the gmail to re - open the tab. Once I did this the page comes with connection two names - the strange correct one and a few. (I've not been able to get rid of the weird name, either). I would like to be able to fix things, so Firefox will do the same thing on this computer as it does on the other.

    Someone at - it suggestions?

    A detail as a website to remember you (automatically log you) is stored in a cookie.

    You can use these steps to make a Web site recognize and remember you:

    • Create a cookie 'allow' except to keep these cookies, in particular in the case of secure websites and when the cookies expire when Firefox is closed.
    • Tools > Options > privacy > "Use the custom settings for history" > Cookies: Exceptions

    You can delete cookies for a Web site to make the site forget about you.

  • Have not used my email in a long time and I forgot the user name and password

    Hello. I don't use my thunderbird email in a long time and can't remember my user name or password if I remember my email address. How can I connect?

    Your user name is all or part of your e-mail address.
    The user name and the password is given with your email provider. You need to communicate with them.
    Most providers have a password reset link on their page for help by e-mail.

  • message: configuration cannot be verified - is the user name and password? None of them are wrong. I'm trying to set up my work email. How to solve the thi

    I have been using Thunderbird for a long time. One day he told me that my password is incorrect. After several attempts, the correct password decided to remove the e-mail account and start to charge. Now, when I put the account it says "configuration could not be verified - is the user name and password? None of them are wrong. I tried to change the password, contact my email provider and everything works fine except when trying to use Thunderbird. The email that I had tried to set up is at work. Any help in fixing this will really appreciate it.

    The best suggestion is to get the correct settings from your provider. They move to the top of their servers. They know the settings that work.

  • I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

    I can not access my Verizon email on my iPad. I can access the login page, but there is no box to enter the user name. I talked to Verizon support, and they say no problem at their end. Any ideas?

    Macbeth,

    From your description, it appears you are trying to get your mail using Safari to access your e-mail account. Why you do not use the Mail App?

    http://www.Verizon.com/cs/groups/public/documents/adacct/Setup-email-mobile-Devi Ed.pdf

Maybe you are looking for