Unable to access the web browser 7.0 DSCC

Hello.

I just installed Oracle Directory Server Enterprise version 7.0. on one "5.10 Generic_142900-13 sun4v sparc SUNW, Sun-Blade-T6320. I used the package install and crossed all stated in the installation manual, with the exception of the part of Application Server.

Trying to access the admin gui dscc via internett Explorer (http://directory server host: 3998/dscc7)
I received the message:


$ 0 x PŠ1.3.6.1.4.1.1466.20036



Do I need an application server to start the web console dscc as wel?

Thank you very much

Sigurd Lyngås
Nets of Norway AS

Yes, you must publish the war file (that you have created during installation) to an application server (Tomcat / Glassfish / etc.). I found to be the easiest to configure on Solaris - Glassfish was about as easy as copying files in place and the execution of a single command.

Tags: Fusion Middleware

Similar Questions

  • I'm unable to access the web browser on your laptop. BT infinity focus.

    My daughter is unable to use any type of web browser on your laptop without loading webpages slowly or not at all timeout. Internet connection is fine as programs, such as Spotify, are still working as usual, but browsers often give the message "server sent no data."

    Hello

    (1) did you make any changes before the show?

    (2) you receive an error message?

    (3) what happens when you try to access the Web sites?

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213/no

    Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

    Internet Explorer slow?

    http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

    It will be useful.

  • I'm unable to access the Web site rewards club mail

    I'm unable to access the Daily Mail online REWARDS CLUB site WEB TO ENTER MY NUMBER ONE

    Hi BrianSheridan,

    1. what happens when you try to connect to the site?

    2. you receive an error message?

    3. what web browser do you use?

    4. what version of IE are you using?

    5. are you able to open the Web site in the other computer?

    If you use Internet Explorer, then perform the following troubleshooting methods:

    Method 1:

    Optimize Internet Explorer, and then check how it works.

    Check out the following link to optimize Internet Explorer.

    How to optimize Internet Explorer

    Note: This article is also applicable to Internet Explorer 9.

    Method 2:

    Also perform the following troubleshooting steps.

    Can't access some Web sites in Internet Explorer

    Method 3:

    If you use Internet Explorer 9, then perform the steps in troubleshooting at the following link.

    Some sites Web may not behave as expected in Internet Explorer

  • BlackBerry Smartphones BlackBerry ID - unable to access the Web Login site

    I have problems logging into App World on the Web site. When I click on loggin it brings me to the BlackBerry ID url that shows the site cannot be displayed or problem loading page due to the connection has expired.

    I tried to go through the site ID BlackBerry (BlackBerry - BlackBerry ID) and App World Store (BlackBerry App World - home page), but I still have this problem. I have tried different browsers (IE 8, Firefox, Chrome, Opera) but no luck.

    App World works very well on my BlackBerry but unable to loggin on the Web portal.

    I tried to contact RIM via Twitter but had no solutions of their own.

    * Update
    I contacted the RIM through my wireless support and discovered his works at their end. I contacted my friend and he was able to connect to the site. There must be something with my ISP connection.

    * Update 2

    I contacted my ISP and they said that they can access the login page of the App World. I tried my VPN connection and it works. I still don't understand why I can't access it without VPN

    I need to know what prevents it from my computer. Well, I'm done.

  • Unable to access the web interface for SG200-18

    Hello

    I got a new switch and I am trying to connect a UCS.  I ping the switch very well, but when I try to use IE8 or firefox, I can't go to the web interface to configure.

    Here is my configuration:

    Cisco UCS C210 M2

    IP = 192.168.1.100

    Subnet = 255.555.255.0

    Default gateway = 192.168.1.1

    Switch SG200-18

    Default IP = 192.168.1.254 (it is not DHCP)

    Any pointers?

    Tom G

    You need to set a static IP on the PC that is connected to the switch. The IP address of the PC

    must be on the same subnet as the 192.168.1.254.  You may need to try something lower to IE8. Should be

    works with Firefox and IE7. There is also a browser called GreenBrowser which works usually with switches.

    Thank you

    Rick Roe

    Cisco Small Business Support Center

  • Unable to access the web site.

    When I type my user name and password on a web site (Walmart) that I use frequently. It seems that it will connect then it turns off. As if I had not typed anything...

    Try to clear your temporary Internet files.  You don't tell us what browser you are using, so it is difficult to be more precise than that.

    -B-
    http://www.officeforlawyers.com | http://www.OneNote-tips.com
    Author: Guide to counsel for Microsoft Outlook

  • The user cannot access the web analytics

    I can't a user unable to access the web tests. When the user attempts to log in they get an error box will appear with "an error occurred during initialization of the boot options.

    I heard that this may be because of outdated java, so the machine has been updated, but the problem persists.

    any ideas guys?


    Thank you very much

    Russell

    This problem occurs mainly due to user 'null '.
    You can try the following:
    1. service and return the available to the user.
    2 delete and re-create the user.
    3. ensure that the user is able to connect to the workspace.

  • Since the installation of the last update of iOS on my iPad I'm unable to type in the address bar of safari. I can access the Web sites of my favorites, but when I try to enter a new address safari closes its doors.

    Since the installation of the latest update on my iPad, I'm unable to type a new address in the address bar of Safari. I can access the Web sites of my favorites, but when I press the address bar Safari closes its doors.

    I reset holding home and power button at the same time. I did that 4 times. I also left all the settings.

    I am also unable to access the server from imessage. I don't know if these two things are related, but the two that happened after the update to iOS 9.2.1

    Since this announcement, I found a Reddit thread that suggests a temporary solution by disabling Safari suggestions. It worked for me.

  • After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

    After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.

    What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.

    If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!

  • virtual access using the web browser

    can I access virtual machine that installed on esxi using the web browser (Internet explorer)

    Hello

    You can access the console of the Web Client vSphere.

    lamw wrote a nice script to generate direct links to consoles, if you want to distribute to other people who are not so familiar with the web client:

    http://www.virtuallyghetto.com/2011/10/how-to-generate-VM-remote-console-URL.html

    He also wrote another script to generate previously authenticated links:

    http://www.virtuallyghetto.com/2013/09/how-to-generate-pre-authenticated-HTML5.html

  • Unable to save the changes in the web browser.

    We have a PDF form that was created to allow users to fill out and save changes. The PDF file has been created with Adobe Acrobat 9 and our users use Adobe Reader X. When you open the document in a web browser (FireFox and IE), the shape can be modified, but said that only one copy can be saved locally. However, if they have everything first to save the PDF file locally without opening it in a browser, and then make changes, they can save it. Is there a setting in the web browsers to be changed?

    OK, this particular file is not compatible player, which means that Adobe Reader will not be able to save any changes once it has been filled. You said they can if they open the form outside of a tacit and web browser they used Adobe Reader 10. So, here are a few possibilities:

    1. they are indeed using Adobe Reader when you open the form outside the web browser, but the version of the form that they have enabled for reader. This means that the version they see in their browser is different from the version on their local system. This is probably not the case, but it is possible.

    2. they are in fact not using Adobe Reader when you view the form outside of a browser, but are using a PDF Viewer that allows you to save a document not compatible Reader. These listeners include Adobe Acrobat, the application on a Mac, Foxit Reader, Nitro PDF Reader and a few others.

    In any case, Adobe Reader is not able to save a completed form that has not been enabled player. If you just need to get more details to find out exactly what is happening.

  • Help - LI running, but get Apache2 Ubuntu default page while trying to access the Web interface of log insight

    Hello

    I installed the Log Insight 2.5 VM via vCenter Server ESXi 5, 5. I was able to deploy the virtual computer successfully and you can see the network through VAPP Options settings. (Attached picture - TIME settings).

    Question:

    Unable to access LI web Interface. While trying to access the Web interface, I get 'Apache2 Ubuntu by default Page' (img attachment). Insight of the newspaper runs and opens the web application on port 80.

    Newspapers, controlled far-

    status of /etc/init.d/loginsight

    Open a session running Insight

    Attached image Loginsight2-DURATION - file /storage/core/loginsight/var/runtime.log

    # sh li - cassandra.sh - status

    SH: li-cassandra-sh: not found

    Check if the tcp 80 port is open through the netstat command. Yes, it is open.

    Telnet on port 80, it says connection and crashes. Image attached - telnet-LI

    Able to ping the IP address successfully.

    How can I check http logs on console LI?

    I would really appreciate response to this soon. I'm working on installation LI for more than a week and struggling to get through this way.

    Thank you

    Radhika

    I believe that you with the configuration, but I tell you that the configured IP address and the IP you hit in your browser are not still the same IP, Log Insight does not work on Ubuntu, so you hit another system. To prove this, connect you to the console of the Insight newspaper and run:

    # cat/etc/SuSE - release

    SUSE Linux Enterprise Server 11 (x86_64)

    VERSION = 11

    PATCHLEVEL = 2

    You will see that you are running SuSE to see a Ubuntu screen tells me that you have an IP address duplicate in your environment and you hit a node that is not an Insight newspaper. I hope this helps!

  • Firefox is unable to access the internet

    Hello

    Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.

    Best regards
    Joel Hedestig

    You can try using the beta version of firefox mobile?

    https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta

  • Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

    Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

    It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

    Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

  • Cannot access IP Web Browser Configuration Page OfficeJet 8600 Plus

    Win 7 64 bit

    HP OfficeJet Pro 8600 more

    Wireless connection

    Hello:

    Wireless network test page printing indicates the IP address for HP Officejet Pro 8600 more like: http://192.168.1.104 (The HP Home Watch Network Diagnostic Utility v4.3.0.002 also: 192.168.1.104)

    When I try to access http://192.168.1.104 with IE 9 or 10 of Firefox I get an error message: "Web site is impossible to view the Web page.

    But, on the same computer, I CAN access http://192.168.1.103 HP Officejet 6480 configuration page of the web browser with IE 9 or 10 of Firefox

    Why I can't access the configuration web page: http://192.168.1.104

    Thank you

    FYI: I set the router to various other modes of network, widths of channels, channel and ssid broadcast power and also removed power to the router and the printer reconnected power and rebooted the computer, these efforts did NOT have access to http://192.168.1.104

    Solved!

    It was a program of adblock blocking ONLY le.104 but not the adresse.103.  Closing the Officejet 8600 welcomed au.104 program

Maybe you are looking for