Unable to access the Windows 7 network or via router or ad hoc homegroup

Similar Questions

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• Unable to access the Windows Update Web site.

  When you try to access the Microsoft Windows Update site, the following occurs. the Web page that says "checking to see if you have the latest version of..." "is displayed briefly. It is immediately replaced by a page of information. This has "[error number: 0x800A0005] the website has encountered a problem and cannot display the page you are trying to display." The options provided below may help you solve the problem,"with the other possibilities in clickable (I went through them but nothing helped...

  I tried Microsoft FixIt Center, but all she could do is to tell me that "necessary attachment components" but not which.

  I also tried to reset Windows Update components according to the instructions on "http://support.microsoft.com/kb/971058".. .no luck.

  I am running XPPro SP3 IE8.

  Symantec Endpoint Protection version 11.0.7101.1056.

  Any help much appreciated.

  Hello

  Perform the steps mentioned below and check if that helps:

  Method 1

  Check if the Windows Update Service is selected as a starting point.

  To do this, follow these steps:

  1. on Start, run and type services.msc in the Open box, and then click OK.

  In services.msc find the automatic updates service and double-click it.

  1. click on the tab log and ensure that the "Local System account" is selected for the account logon and the box "Allow service to interact with desktop" is DISABLED.
  2. in the hardware profile sectionin the log tab, check that the service is activated.
  3. on the general tab, the Startup Type should be Automatic, otherwise, the drop-down list box and select automatic.
  4. under "Status of Service" under the general tab, the service must be started, click the Start button enable.

  Repeat the above steps for the service "BITS Background Intelligent Transfer Service ()".

  Method 2:

  You can also re - register dll in Windows Update.

  To do this, follow these steps:

  1. Start, run, type CMD and click ok
  2. in the black command window, type the following command and press enter

  REGSVR32 WUAPI. DLL

  Wait until you receive the "DllRegisterServer in WUAPI. DLL succeeded"message and click OK."

  * Repeat the same step for each of the following commands:

  REGSVR32 WUAUENG. DLL
  REGSVR32 WUAUENG1. DLL
  REGSVR32 ATL. DLL
  REGSVR32 WUCLTUI. DLL
  REGSVR32 STINKS. DLL
  REGSVR32 WUPS2. DLL
  REGSVR32 WUWEB. DLL

  Method 3:

  Delete the corrupted Windows Update files. To do this, follow these steps:

  a. at the command prompt, type the following command and press enter

  net stop WuAuServ

  b. at the command prompt,

  type cd %windir% , and then press enter

  c. in the opened folder, type the following command and press ENTER to rename the Software Distribution folder

  Ren C:\Windows\SoftwareDistribution SD_OLD

  d. restart the Windows Update Service by typing the following at the command prompt

  net start WuAuServ

  Type Exit and press ENTER to close the command prompt.

  e. restart the computer and check if you have a similar question.

  
  For reference:

  You can access the event viewer on your computer and check the newspaper of windows for messages/error codes important related to the question and after return from errors in the event viewer.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://support.Microsoft.com/kb/308427

  Let us know if it helps.

• Satellite C660-11K - keeps freezing and unable to access the windows

  Recently purchased by Satellite C660 11 K and load a game on it, after a few hours it froze (ctrl alt del wouldn't work) I stopped and he started up and I got a message saying some software or hardware was the stoppage of work Windows.

  I restored it to factory with the recovery disk. However, I have not loaded all the games or other software since then, but it keeps freezing, and I had to use the drive recovery 3 times!
  I don't know what else to try!

  What happen exactly when you use own OS preinstalled?
  What do you do when your computer crashes?

• Error after fresh install Windows XP Pro Service Pack 3: you may be unable to access the Windows Update site... If these versions of Windows are not updated with the latest Service Pack

  I tried that at this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f?page=4&TM=1313954410562

  In particular, I tried everything (except #7-la destruction - because I just destroyed yesterday... LOL)

  1 reset
  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
  3 run the difficulty of method 2 here: http://support.microsoft.com/kb/943144
  4 run the difficulty from here: http://support.microsoft.com/kb/971058
  5 reset
  6 try Windows Update
  7 if it does not, repeat steps 1-6 before using your preferred method of destruction of the computer.

  I have a completely fresh installation. I reformatted yesterday installed the operating system, which comes with 3 SP.

  I used the Dell site to get the rest of my drivers and then began the process of trying to update. Immediately, I got the error above.

  According to that link above, 'FinnGange @ & anyone else having a similar problem: to avoid confusion, please start your own, new thread on YOUR specific problem and your computer. " Indicate your current version of IE, and the full version of Windows.

  So, here is my new thread! :)

  I am running XP Pro 2002 SP3 and IE8

  Please help me with this problem.

  Thank you

  Kris

  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144

  If you go to that page and made scroll to Method1, you will see there are three installers. Which did you use?

  Also, what is the make, model and model number of your PC? Is your Windows XP 32-bit or 64-bit?

  Did reboot you after you run the Update Agent Installer?

  Dump you all your IE8 temporary Internet files and cookies?

• Unable to access the network using Edimax N300 universal Wi - Fi extender

  Original title: Edimax Extender will not get internet access

  I naoual got a N300 Eimax universal Wi - Fi extender but I am unable to connect to the internet.  They suggest setting up near the wi - fi access point to get the signal stronger and I got to show connected in the window ' currently logged in ', but it does not connect to the network.  EDIMAX has proposed upgrading the firmware, but I was unable to get any joy with that either.  Anyone with any ideas would be appreciated.

  Hi Gofchap,

  Thanks for the question of validation in Microsoft answers community!

  I imagine the frustration you feel when you are unable to access the network.

  The problem may be because of the Extender, diverter, or with the network adapter.

  1 did you do changes on the computer before the show?

  2. do you receive any error messages?

  3. What is brand and model computer?

  4. have you tried to connect without using the extender?

  I suggest you to visit:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab3&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

  Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Dell has developed a passwoord and cannot access the Windows XP system on a network share in Windows 7.

  Original title: network router, XP computer and Windows 7 laptop computer dilemma.

  My system XP computer is part of a network using a router. I also have a laptop Windows 7, using the same network. Reference Dell set up a password so that the network is not accessible without password, reducing the risk of piracy. Now, I can not in the XP system because of the defined password.  How to reset or enter the password on the XP computer?

  Hi Scottid2,

  1. do you receive error messages when you access the Windows XP system?

  2. What is the password being set by Dell?

  You can check in the Windows 7 system if the password protected sharing is enabled. When protected by password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer.

  You can turn off password protected sharing and check if it helps.

  For more information, see the articles:

  Why can't I connect to other computers?

  Networking of computers running different versions of Windows

  As the password is set by Dell, you can also consult with support of Dell for the same thing:

  Dell support

• remote VPN and vpn site to site vpn remote users unable to access the local network

  As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

  The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

  ASA Version 8.2 (2)
  !
  host name
  domain kunchevrolet
  activate r8xwsBuKsSP7kABz encrypted password
  r8xwsBuKsSP7kABz encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  PPPoE client vpdn group dataone
  IP address pppoe
  !
  interface Ethernet0/1
  nameif inside
  security-level 50
  IP 192.168.215.2 255.255.255.0
  !
  interface Ethernet0/2
  nameif Internet
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  management only
  !
  passive FTP mode
  clock timezone IST 5 30
  DNS server-group DefaultDNS
  domain kunchevrolet
  permit same-security-traffic intra-interface
  object-group network GM-DC-VPN-Gateway
  object-group, net-LAN
  access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
  tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 Internet
  IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  AAA authentication enable LOCAL console
  LOCAL AAA authentication serial console
  Enable http server
  x.x.x.x 255.255.255.252 out http
  http 192.168.215.0 255.255.255.252 inside
  http 192.168.215.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dynmap 65500 transform-set RIGHT
  card crypto 10 VPN ipsec-isakmp dynamic dynmap
  card crypto VPN outside interface
  card crypto 10 ASA-01 set peer 221.135.138.130
  card crypto 10 ASA - 01 the transform-set RIGHT value
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  lifetime 28800
  Telnet 192.168.215.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  management-access inside
  VPDN group dataone request dialout pppoe
  VPDN group dataone localname bb4027654187_scdrid
  VPDN group dataone ppp authentication chap
  VPDN username bb4027654187_scdrid password * local store
  interface for identifying DHCP-client Internet customer
  dhcpd dns 218.248.255.141 218.248.245.1
  !
  dhcpd address 192.168.215.11 - 192.168.215.254 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Des-sha1 encryption SSL
  WebVPN
  allow outside
  tunnel-group-list activate
  internal kun group policy
  kun group policy attributes
  VPN - connections 8
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel
  kunchevrolet value by default-field
  test P4ttSyrm33SV8TYp encrypted password username
  username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
  username kunauto attributes
  Strategy Group-VPN-kun
  Protocol-tunnel-VPN IPSec
  tunnel-group vpngroup type remote access
  tunnel-group vpngroup General attributes
  address pool VPN_Users
  Group Policy - by default-kun
  tunnel-group vpngroup webvpn-attributes
  the vpngroup group alias activation
  vpngroup group tunnel ipsec-attributes
  pre-shared key *.
  type tunnel-group test remote access
  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
  : end
  kunauto #.

  Hello

  Looking at the configuration, there is an access list this nat exemption: -.

  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

  But it is not applied in the States of nat.

  Send the following command to the nat exemption to apply: -.

  NAT (inside) 0 access-list sheep

  Kind regards

  Dinesh Moudgil

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• Unable to access the store using the proxy server.

  I'm in Windows 8. I'm unable to access the app Store. He said:-"we were not able to connect to the Store.This could not have come because of a problem with the server or the connection network has expired. Please, wait a few minutes and try again.and some other applications also. I use a 1.1 proxyserver (squid) that requires basic authentication.
  However I m able to use some of them as weather, maps, etc.

  I read solutions who suggested to temporary disable firewall and antivirus for test, I even try it but fails again.

  Other suggestions where has been going for windows 8.1 upgrade level, but how can I get this update, as it is downloaded in store that I can't access. Help, please.

  Hi Anand,

  Your computer is connected to a domain?

  Using a proxy server can allow the administrator to limit access to the Internet.

  You can reduce the effect of these problems by allowing unauthenticated through your proxy server access. We recommend that you enable unauthenticated access only for connections to URLs used by each application that has a problem. Some proxy servers may suggest that you create a list of URLs (also known as the 'white list') permissions.

  Please refer to the article to address these issues that relate to the use of Windows Store apps or use of Microsoft applications that are included with Windows Update or Windows 8, you can include the addresses mentioned in the article in a list of permissions ('white list') on your proxy server and enable HTTP and HTTPS access for them :

  The use of proxies authenticated with Windows 8

  For more information, see the article:

  Using the Proxy selection and Proxy bypass lists

  You can also consult the steps by Rajesh Govind, Support Engineer, may 4, 2013 and check.

  Windows 8 apps not able to detect the proxy for my machine settings.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot access the windows service install

  Initial Setup error title: windows
  I'm unable to download the latest version of java as well as the updates of windows and the reason given was that "cannot access the windows service install" Pls advise

  Hello

  What happens when you try to perform windows updates?

  Check the status of the Windows Installer service and make sure that it is started

  Method 1:
  Start the Windows Installer service
  a. Click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. the value of the Windows Installer Manual startup type
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Unregister and register the Windows Setup program again
  Method 2:

  Unsubscribe and re - register the Windows Installer to do this follow the steps below.

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.
  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.
  c. try your application based on Windows Installer again.

  Method 3:
  You can follow the steps in knowledge base article and check:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• Try to install adobe reader & I continue to get this message... Error 1606. Could access the location %APPDATA%\ network what do I do?

  Try to install adobe reader & I continue to get this message... Error 1606. Could access the location %APPDATA%\ network what do I do?

  Check the registry values listed in the present statutes are suitable:

  http://support.Microsoft.com/kb/886549

  http://support.Microsoft.com/kb/2258121

  If this does not resolve the problem, create a new administrator account and use it to do the installation.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• error message 1606 could access the location %APPDATA%\ network

  Hello

  I tried to install office 2007 on my computer. I now have 2003 on my computer. When I try to install I get the error message

  error message 1606 could access the location %APPDATA%\ network

  I have window vista home basic edition. What should I do next. Thank you

  Please try this FixIt:

  http://support.Microsoft.com/kb/2258121

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• We have a Nextbook but are unable to access the Internet at home

  We have a Nextbook but are unable to access the Internet at home, even if we have a laptop and PC. How to solve this problem? Thank you.

  Hi Vernon,

  1. you are trying to connect the Nextbook to wireless (Wi - fi) network in your home?

  It is a tablet based on Google's Android. As it comes to one product other than Microsoft, I suggest that get you in touch with the manufacturer about this issue. You can contact them at the following link:

  http://www.nextbookusa.com/techsupport.php

  Hope this information is useful.

• An error occurred when accessing the Windows CardSpace...

  So, I get this error message whenever I clicked on Windows CardSpace in Control Panel. "An error has occurred all by accessing the Windows CardSpace. Please see the the event log for more details. "I checked the event log and I read a bunch of posts which basically means the same thing. "An error occurred when communicating with the Windows CardSpace service." "" An unknown exception caused the request to fail. For more information, please see the event log. Inner exception: attempted to perform an unauthorized operation. ""An error occurrred while accessing the card collection.  The store directory or file ACL Bank had is shown to be altered. The ACL have now been restored to their default settings. ""An error occurrred while accessing the card collection.  Unable to open the store. »

  WHAT DOES THIS MEAN?
  

  I logged the administrator account and noticed that Windows CardSpace actually worked. Well, it's good to know he works at least on one account...

  I would try to make a new user account, but I haven't the time to copy everything back. I'm not seriously. Last week, I spent three hours to copy my files after reinstalling Windows. I really want to do it again.

  I read that this may be evidence of a corrupted user profile, but I don't get any messages on my user profile be corrupt.

  Is there an another fix for this error?

  Please help me with this, I know other people had this problem.

  Thanks in advance,

  ~ yosecchi1098

  Hello

  You can post your question here for assistance:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro