Unable to access updates for windows xp home edition (sp3) via "Fix - it", Windows Update or Microsoft Update and Windows Update

Hello

I have download a new download "Fix - it"; all the convenience of work with the exception of "Windows Update".  Also I went through self-help suggestions in "go-microsoft", but nothing helped.  I also tried the "cmd" method (i.e.: start, run, cmd and then copy and paste each .dll for windows update); 1 a .dll could not be found, and two other 2 couldn't register.  After Windows Update represented existing 'cmd' method, I then, well my system recognized the appropriate software update and allowed me to press the 'Express' butotn to an update of high priority for installation (e.g.: Cumulative Security Update for Windows XP...) Sorry, but I forgot the KB #), unfortunately, he could not install, then I ran Windows Update again and pressed the 'Custom' button and three 3 software update optional appeared, as well as an XP update.  Once again, all the selected custom updates has not installed.  I am therefore at a disadvantage as to how I can access necessary security updates for my computer and would appreciate contact me promptly to address this urgent problem.  Thank you much in advance - arldarl

Hello Tommy.

Thanks for sharing the information above to remedy my Windows Update and please accept my apologies for my being too general with my question.

After many hours of running the programs above, SuperAntivirus found 1 an Adware and 55 Tracking Cookies; MalwareBytes found 1 1 that a horse of Troy, and EsET found Trojan horse more!  My computer is vulnerable, so 'thank you '... I would never have known to load/run these particular l, and nor would I knew I had these TAPI problems in my computer.

After several attempts of installing/re-installing 'Fix - it' (i.e.: deletion of multiple copies associated with my Microsoft Online ID), I was unable to make progress, so I ended up check my Services and found BITS to be set up as 'Network' instead of 'Local '.  I made this change, Windows Update, and the Cumulative Update has began to download - finally!

I suspect that any of your suggestions, and my little trick got Windows Update to work?

Thanks a lot a lot - arldarl

Tags: Windows

Similar Questions

  • I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

    Original title: connection problem

    I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

    The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.

    Hello

    Thanks for posting your query on the Microsoft Community.

    With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.

    I would be grateful if you could help me with more information:

    1. Since when you are facing this problem?

    2. What is the exact error you receive by accessing the computer?

    I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

    Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

    For more information, you can consult the Microsoft article.

    What to do if you forget your Windows password

    http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

    Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

  • Unable to download itunes for windows 7

    Unable to download itunes for windows 7, when I try, it comes up with the message "service" apple mobile device "(device mobile apple) is not start.verify that you have sufficient privileges to start system services.

    Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.Apple.com/kb/HT1923

    Uninstall software, remove programs and solve uninstalling problems
    http://www.revouninstaller.com/

    Remove and reinstall iTunes, QuickTime, and other software components for Windows XP
    http://support.Apple.com/kb/ht1925

    Hello questions, see if that helps: http://www.raymond.cc/blog/archives/2008/02/10/how-to-uninstall-or-remove-bonjour-mdnsresponderexe/

    Problem installing iTunes or QuickTime for Windows
    http://support.Apple.com/kb/HT1926

    Turn on Windows 7 'Compatibility Mode' to iTunes:
    http://www.PCWorld.com/article/188534/turn_off_windows_7_compatibility_mode_for_itunes.html

    Windows reports that iTunesSetup.exe is not a valid Win32 program
    http://support.Apple.com/kb/TS1406

    First of all check if you have a version of 32 or 64-bit Windows:
    1) click the Start button, right-click computer and then click Properties.
    (2) in the system, see the system type - it will say either 32 or 64 bits.
    (3) download the appropriate version using the links.

    ITunes download (32-bit):
    http://www.Apple.com/iTunes/download/

    Download 64 - bit:
    http://support.Apple.com/kb/DL1037

    Make sure that the "Windows Installer" service is running, or force start to begin.

    (1) open run, and type services.msc, and then press ENTER. You can also go
    Control Panel/Admin Tools/Services.

    (2) locate the Windows Installer in the list of installed services.

    (3) check that the status is "started".
    If the condition column is empty, right-click Windows Installer, and then select start.

    (4) If you get the error trying to force start the Windows Installer service,
    and then change the Startup Type to automatic (the default value is 'Manual').
    and then restart the computer.

    (5) very Installation Service runs after you restart the system.

    Also:
    Forum of Apple's Itunes: you can find a solution (if none of the above is of no help) to your problem when you post on their forum.

    http://discussions.Apple.com/category.jspa?categoryID=150

    J W Stuart: http://www.pagestart.com

  • MAJOR ISSUE: ThinkVantage Access Connections for Windows Vista causing the range problems

    Community salvation and Lenovo,

    He took a whole day to stem actually happening. Note: That there is no discussion on the software or defective equipment: my equipment is working properly. All the software has been uninstalled and installed properly. I would like to highlight: (read on to find out why)

    THE PROBLEM IS CERTAINLY: ThinkVantage Access Connections for Windows Vista.

    Hi Ran,

    Thank you!

    I have not yet tried.

    In the meantime I did several tests and discovered that even with only Power Manager version 2.41 has installed the latest driver wireless Intel Pro, also supported by lenovo is not stabel and FN + F5 or windows network connection fails also to turn the radio back on to after a reboot when the radio is off Prime ;-(

    Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283

    again and again, I decided to return to the old driver wireless Intel on this page.

    http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67256

    Reinstalled ThinkVantage Access Connections for Windows Vista version 5.12

    I tested it again... THIS MARKET!

    Please try this combination:

    BIOS version: 1.15

    Bluetooth with Enhanced Data Rate software II for Windows Vista Version: 6.2.0.5000

    ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62

    Driver ThinkPad Power Management for Windows Vista, XP, 2000, Me, 98 Version SE: 1.52

    ThinkVantage Productivity Center Pack Version: 3.02

    Power Manager for Windows Vista Version: 2.41 has

    ThinkVantage Access Connections for Windows Vista Version 5.12.

    Intel Wireless LAN (11abgn, abg, bg) for Windows Vista API 11.05.0

    Kind regards

    Ritchy

  • Adobe cloud locked out and unable to access updates. Released and NONE of my passwords (written down) work?

    Adobe cloud locked out and unable to access updates. Released and NONE of my passwords (written down) work?

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)
    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • Update XP Home Edition SP3 for XP Professional SP2. It's less work to do an upgrade?

    I am running XP Home Edition SP3 and loaded Visual 2005 and find the tutorial that I use for Visual c# 2005 must have XP Professional SP2 (but I don't know SP3 would also work) and I don't want to have to do whold many other changes.  Am I right that installing a version upgrade is the best option?  Any suggestions?  The speed of machine and disk space is fine.

    What Daave said... more

    It is difficult nowadays to find the installation CD of infringement for any version of XP, so before you go to eBay or a similar place to find an XP Pro upgrade CD, really tried your tutorial and it had fail or are you just read the 'minimum requirements' from somewhere?

    If you have not tried to run on your system, I suggest to try this before doing anything else.  If you have failed, what was the specific error, without paraphrasing, that was displayed? There may be a workaround solution that someone here might suggest.

  • Bootsect.dat file is corrupt, NTLDR is missing/compressed on x 86 pc with Windows XP Home Edition Sp3 and Ie8

    I have a x 86 pc with Windows XP Home Edition SP3 and IE8.

    While preparing for a possible update for Win 7, I thought repartioning and "multiboot" my HARD drive.

    I tried to get WinXP operating as best I can.  I was also check out how to use the Windows Recovery Console to reinstall WinXP and transfer files to a clean reinstall.

    Found while searching "All boot paths" to Start\Run\msconfig\BOOT. INI that one boot path has been highlighted with errors indicating that "file is corrupt because playing a disc error has occurred" and that NTLDR is missing or corrupt.  In fact, it is blurred.  It points to "Recovery Console Microsoft Windows/cmdcon.  I've not used the Recovery Console, ever.

    I have a desktop Gateway 5310 S (detail) and no original XP disc, apparently.

    I have, but never used, a 4ea. set of recovery CD as of 12/05/05 I need to have created after purchase.

    I also had many, odd, problems that come and go, including worth displaying various websites, Yahoo Home Pages and E-mail that keep switch to compatibility mode or outright deletion.  The video and audio on Hulu and video-on-demand online services are always out of sync.  I have problems with editing posts on sites like this even if I can edit my profile fine pages.

    This particular set of problems started recently and very suddenly, from one day to the other.  It was after he worked actually pretty good for a change.

    I don't know how long the boot.ini file has been damaged, I actually discovered by chance.

    I can also not to reinstall some programs such as Family Tree Maker 2005 and 2008, when it was suggested to me by ancestry.com to uninstall/reinstall.

    I have the latest Java and Adobe Flash Player.  I've defragged and disc verified my discs.

    I used CCleaner to delete temp and unwanted files per day.  I ran Hitman Pro, MBAM, MBAR, MSE and SAS several times without detected virus or malware.

    And, as I mentioned above, I have problems with the editor of this site, right now.  Sometimes it just freezes and I have to leave to clear.  Other times it's duplicating entire sentences.  He also flip/flip flops between a Publisher full page and, as now, a half page window of the editor on the half left of the page.

    Suggestions from what people you can come would be greatly appreciated.  This gets really annoying.

    Thank you

    Vernon

    When you check the paths in the boot.ini file, and the recovery console is installed, you will always get an error message indicating that the startup path is not valid.

    If the recovery console is actually corrupted just to uninstall, you can reinstall or burn a cd with the recovery console.

    go here for instructions on deleting the recovery console.

    ===========

    Here's how to make a bootable xp recovery console cd

    Courtesy of JoseIbarra

    You need start by booting in XP using a CD Recovery Console, you can do (no XP media required) and run a chkdsk with error correction command enough times until it is clean and if it does not, you can create a new boot.ini file (this is usually one of two things).

    Here's how:

    Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    RC. ISO

    Download the ISO from here:

    http://www.thecomputerparamedic.com/?p=8    (courtesy of Daavee)

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    When you install ImgBurn, DO NOT install the Ask toolbar.

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient. If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

    ===============

    as for the other problems:

    did you use Registry cleaners?

    These can damage your system

    You seem to be free of infection, it would seem that a part of your process cleaning has removed a necessary file.

    ===============

    Checkdisk with parameter/r should be run. and run it again until there is no error.

    ==========

    you are fully updated and patched to Microsoft updates?

  • I need to upgrade Windows Home Edition SP3 to Windows Professional SP2.

    I need to upgrade Windows Home Edition SP3 to Windows Professional SP2.  I have the CD SP2 Professional.  I need to remove SP3 so that can perform the update.  How can I do this?

    I ask why you "may need to be upgraded" Win XP (I guess) professional?

    How to remove Windows XP Service Pack 3 from your computer
    http://support.Microsoft.com/kb/950249

    NB: If your computer came with WinXP SP3 preinstalled, you can not uninstall it.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • How to uninstall Windows XP Home Edition SP3?

    Specifications:

    Sony VAIO, XP Home Edition SP3 computer - if any other information is needed, please let me know.

    --------

    The main problem is that after the update via Windows Update from SP2 to SP3 has caused the USB ports to stop working. I tried everything that is listed on this Web site: http://support.microsoft.com/kb/950249, contacting Sony, System Restore (for some reason, I did not define a restore point before installing SP3!), unplug the computer for a few hours (which works for about 10 seconds after putting a flash drive into a USB port, but then the USB port stops working) , research in the folder where the update is supposed to be in (but he's not here), looking in Add/Remove Programs, remove registry, searched files via Google answers, etc., etc.

    Help is greatly appreciated. Thank you.

    You do not use / have you used "Registry cleaners" (e.g., Registry Mechanic;) Registry Booster; CCleaner)?

    The above, if WinXP SP3 is not listed in Add/Remove Programs, the only way you can remove it would be formatting your HARD drive and do a clean install of Windows XP. A repair installation (AKA In - Place Upgrade) will not fix it! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • How to save with pre-installed Windows XP Home edition SP3 but no install disc?

    I want to save data files on desktop with preinstalled Windows XP Home Edition SP3.  I don't have access to an installation disc.   How can I get a?

    You don't need a Windows installation CD in order to backup data files.  What makes you think do you?

    [The light bulb turns]: you're probably trying to install NTBackup.  My advice to you is to forget NTBackup and get a disk imaging or cloning application.  I propose the following actions:

    Acronis True Image Home 
    Paragon backup and recovery home
    Casper 6.0
    Norton Ghost (used to be the standard for imaging applications, but I haven't used recent editions; if you really want to use a Symantec product, read the reviews on Amazon)

    If you really want to use NTBackup (worth what you pay for it), see http://www.ihatedroz.com/windows-backup-utility-without-cd

  • XP Home Edition, SP3. Active window becomes inactive, no clicks, then becomes active after 5-10 seconds.

    I use XP Home Edition, SP3.  When I'm working in an active window (say, MS Word), the window has become suddenly idle for 5 to 10 seconds and then becomes active again.  Everyone knows about this problem?  I thought it might be a problem of Outlook and run the detect and repair command, but that did not help.

    I had the same problem except that it was on Windows 7.  Well, it would not matter what OS is in my case.

    Symptoms: Everything seemed normal until I opened Outlook 2007 and had messages in my Inbox.  Once the messages have arrived in my Inbox outlook began to lose his accent all ~ 5 seconds. I would try to compose an email and he would lose his orientation (became inactive) for about 3-5 seconds then it would possibly come crazy me backwards.

    Solution: Open the the Task Manager and sorted in addition to the processor.  Open outlook and left he opened in such a way that I would be able to display the Task Manager and Outlook-by-side.  Click outlook so that it had the focus.  With outlook open, I started noticing that whenever he would lose his focus a process called TMAS_OS.exe jump upward.  I searched my computer for the file "TMAS_OS.exe" and found its location in Trend new application called "Titanium".  Apparently, it is associated with a software component plug-in 'purchase of Outlook outlook extension support?' and it seemed to go nuts.  I have uninstalled/reinstalled the app and now everything is fine.  It drove me crazy and it was the first time that the trend has never made me heartache.

    UPDATE: the issue made ugly reappeared the next day.  Apparently, initial installation, antispam behaves but on reboot antispam titanium going nuts once more.  It may be an incompatibility between the add-in (AntiSpam) TMA of trend microphones for Outlook 2007 running on a Windows7 64-bit operating system?

    For now I have disabled the supplement product TMA Titanium Internet Security 2011 trendmicro until they found a solution.  I'll just have to idetify and deal with any spam myself.

    To turn off the snap TMA:

    1. close Outlook, and then open the main console for Trend Micro Titanium Internet Security
    2. click on the 'Settings' button at the bottom
    3. click on 'Internet & Email orders' on the left
    4. click on 'Spam' on the left
    5 uncheck "Filter unsolicited advertisements and other unwanted e-mail messages" > apply > OK
    6. exit the main Console

    You can check THAT TMA is disabled:
    1. open Outlook
    2 tools > Trust Center > click on Add-ins > on the bottom, make sure that the ' Manage: ' drop-down list is set to "COM Add-ins" and click on the "..." button. "> Search FRO"TMA"must be unchecked

  • I have Windows XP Home Edition SP3, 32-bit and IE8. Do I need to upgrade to Windows 7?

    I have Windows XP Home Edition SP3, 32-bit and IE8.  Do I need to upgrade to Windows 7?

    The upgrade to Windows 7 is a personal decision.  Chances are that if you can do what you need to do on Windows XP then it is 'useless' to upgrade.  If you plan the upgrade anyway, you should first check to see that your hardware is supported under Windows 7.  To do this, Microsoft has provided a program of "Windows 7 Upgrade Advisor" to run on your current computer.

    <>http://Windows.Microsoft.com/UpgradeAdvisor >

    HTH,
    JW

  • Dead screen MPT V3re unable to access phone for contacts

    The MPT 5.05, have updated it entirely online - 5.31 has. Downloaded Motorola Driver Install 5.20 and makes a clean and reinstall those. Windows XP SP3 recognize phone when it is connected with the appropriate USB (Motorola OEM cable for this phone). The husbands of customers phone, screen went black, AT & T said that they would have to fix the phone before being able to withdraw from the list of contacts and photos. Cooler for the process to wrest. Right.

    First thing I noticed, if I plug the USB into the phone, and then in the port USB to the PC so that the phone is OFF, turn on the outdoor screen and inside the screen lights up with the home screen HELLOMOTO, after a few moments, both screens turns off and don't come back.

    MPT sees that the phone is there, however, constantly returns that he is not ready because of the possible OTA or start-up, wait... message when you try to find contacts on the phone.

    Question - are there at - it something on the phone what to do to put it in a mode where he can talk to the computer?

    Issue 2 - the screen isn't DEAD, I can say the start HELLOMOTO screen, what could be the cause until it off when you leave the splash screen?

    Trying to get contacts and Photos off the phone - think I've read THAT MPT is unable to take photos on a phone from AT & T, is that correct?

    Edit: Motorcycle support told me about myinteractivemobile site, however, was not able to get her yesterday evening or today because she has been down for some reason any. I was able to pull up a cached Google of this version and V3re is not a list, anyone know what model the unit menu system would be the same? I just need the right, left, bottom, top of clicks to get to the settings > connection > then set it to Sync (if I read other posts correctly)

    Here's the scoop... First of ALL, the phone requires a SIM card if AT & T/Cingular! Does not need to interact with the SIM at all, just have to be able to access all the menus!

    The menu structure: different graphical if menu or based on a list, to get to settings. If the graphic base, press Menu then to the right, down, select. So based on the list, press menu, then upward, select. You are now in the settings menu. (For those in my situation with white screen, try one, if it doesn't work, try the other after phone electric bike so that you know you are on the main screen)

    Settings - low, low, low, Select (it comes for connections), down, select (this is for the USB settings). No matter which is "proven" already, press left "shoulder" button (upper left button on phone) for the change. Data always connection as first item in menu and is highlighted even if not the checked item, press Select to choose.

    Plug USB cable, open MPT, Contacts, click Refresh on the side of the phone, look at the contacts to be paid.

    MPT will grab also the photos on AT & T phone - had read somewhere it wouldn't, it does.

    I hope this can help someone!

  • A security update for Microsoft Infopath 2007 (KB2596786) for my XP Home Edition can not install?

    He goes through the installation of the "green bar", then said next update has not been installed.

    Have Windows XP Home Edition Version 2002 Service Pack 3, generic Sempson AMD 3000 + 1.99 ghz, 960 MB RAM

    Please advise as soon as possible... Thank you.

    Have you tried to install the update manually?

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=30275

    If this isn't the case, have you tried to install the update with the original installation media for Infopath 2007 in the drive?

    Is there an error code to give us a clue as to why the update fails?

  • Windows XP Home Edition SP3 (error: files which are required for Windows to run properly have been replaced by unrecognized versions)

    I get this message: files which are required for Windows to run properly have been replaced by unrecognized versions.  To maintain system stability, Windows must restore the original versions of these files.  Insert Win XP SP3.  Please help - I can't find the disk.

    If the original xp installation disk had sp2, files for sp3 are not on it.

    on the right side of this page is a link for sp3.

Maybe you are looking for

  • Palm Desktop 6.2.2: Memo Pad showing is no longer

    I upgraded to Windows 10 and downloaded and installed 6.2.2. When I run it I can't see Memo Pad or a way to import. What I am doing wrong?

  • PREMIUM HP: HP PREMIUM: improve 2 VAR APP with interception of axis Y

    Here the desired improvement: With MS Excel, in linear regression is chosen, it is possible to define the intercept with the y-axis. Its is interesting when you know that the correct answer is y = M * X (for example: d = V * t or A = k * C (beer-Lamb

  • Key records is not on Satellite C660

    The keyboard on my month Satellite C660 often doesn't seem to work properly 100% - lack of characters, double and generally does not record the capital letter when you use the SHIFT key (shows apital rather than Capital). It is intermittent then mayb

  • NetBook - cannot start from the CD live Ubuntu 8.10

    Try to boot from Ubuntu 8.10 live CD on my Netbook NB100 to see if everything works before upgrading - starts OK but then after a few minutes I get just a screen rolling filled with dev sr0 and block numbers of the IO error.The CD starts OK on my Tos

  • Lost everything, since the new update!

    I recently without date my iphone 4 with the new ios software 5 but the back toward the top of my phone has failed and now I lost my videos and pictures - it will be on itunes as I try to sync it fails every time? Can anyone help