Unable to activate: map Tun Miniport, Microsoft
I get this message... what to do?
can help
Tags: Windows
Similar Questions
-
How can I get Tun Miniport, Microsoft card to work properly.
There is an exclamation on it in Device Manager, but windows declare that it does not work correctly
I'm on hp Pavilion dv6000
Hello
· You are able to go online?
· You receive all code or an error message when you try to connect to the Internet?
Method 1:
I suggest you to reset the TCP/IP stack and check if it helps solve the issue.
To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
http://support.Microsoft.com/kb/299357
Method 2: Turn off IPv6
Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
NOTE:
You should do this for each network connection.
Method 3: Disable the DHCP Broadcast Flag
Follow the link below to disable the DHCP broadcast flag
http://support.Microsoft.com/default.aspx/KB/928233
Important:
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756
How to back up and restore the registry in Windows
You can also try the following items on the advice on common network problems.
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx
http://windowshelp.Microsoft.com/Windows/en-us/help/fc58605e-A2be-470C-95b3-6808a76347991033.mspx
Hope the information will help. Please go back and let us know.
-
Only seems to have happened since the installation of SP3.
Peter-breaking,
Welcome to the responses of the Forums. If you have not tried the troubleshooting steps in this thread, so try them and post back with the results.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Can map of Tun Miniport Microsoft how I solve this
Hello
The mini-port is part of the network driver and should not really cause problems since most never
use its features. The virtual Port is used to allow other WiFi devices to connect to the internet via
WiFi to your computer. If you do not use this function, you can then disable the virtual card. Device
Manager - Network - Virtual WiFi double click on it - the pilot - Disable tab.Check system manufacturer support, online resources, and the drivers and their forums (if any).
Also check the website of the manufacturer of the real device. New drivers may be needed.-------------------
Panel - device - network - WiFi note the check mark and all the info on the model Manager-
Double-click on - write Drivers version tab - then on power tab uncheck 'Allow '.
the computer to turn off this device... »Then on the tab driver, click Update Driver (this can do nothing as MS is far behind certifying)
drivers-) then right click on the device - UNINSTALL - REBOOT - it will refresh the driver
stack.Go to system Maker and search for the WiFi Driver updated - download - SAVE - go to the place where you
He could - just right-click on it - RUN AS ADMIN - REBOOTThen go to the site of the manufacturer of the device and look for even more recent (Realtek, Intel, or whoever's doing the)
device) and try the install again.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Microsoft Tun Miniport adapt #2 /.
Microsoft Tun Miniport Adapter #2 / it is disabled (code 22) / this device cannot start (code 10). I need help to activate the network adapter.
Description: Broadcom 802. 11b / g wlan - Packet Scheduler Miniport
Device ID: root | * tunmp \0001
status 0 x 01802401 has problem
0x0000000a problem (10)Hi GGisin,-Did you change on your computer before this problem?Follow the steps listed in the article below for the mentioned error code:
Explanation of error codes generated by Device Manager in Windows XP Professional
Note: The information provided in this article are applicable to other versions of Windows XP as well.Additional reference on: -
Hello! I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000 (longhorn_rtm 080118-1840). I have a problem because my internet is not working because of the adapter, so I'm not able to use your forum solutions requesting that my internet is working. So, can you give me some advice on how to deal with this problem.
Hello
Refer to the answer posted by Sabrina Shen in the following link to resolve the problem:
See also:
-
problems with the internet connectivity and card # 2 microsoft tun miniport
Hi, I have problems to connect to the internet and my laptop tells me them a problem with the modem / router. However, another laptop computer connected to the modem/router even works very well. in the Device Manager was an exclamation mark beside "teredo tunneling pseudo interface 10. then it disappeared and I found myself with an error with «#2 microsoft Tun miniport map» now his party in error teredo. I still only have a local internet connection i.e. no internet. not really have a lot of knowledge when it comes to computers. any help would be really appreciated.
Hello
You can try the steps in the similar thread to the next with a possible fix:
-
in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez
Hello
Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT
Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
and on some computers, it will always be there but don't cause any trouble.On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
error message
http://support.Microsoft.com/kb/932520I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
#2 Microsoft Tun Miniport Adapter? Error code 10
Hello guys! I couldn't connect to internet from my desktop computer. I found this error message for the Microsoft Tun Miniport «»
Adapter 2 # "describing that the driver could not start. (Error code 10)
I tried uninstalling the driver and then update but failed...
I have a Windows Vista 32 bit and the model is SR5703WM
Any help would be really appreciated :D
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104Hardware devices not detected or does not
http://support.Microsoft.com/GP/hardware_device_problemsIf the steps above fail I would say that you uninstall the network card and later visit the network adapter manufacturer's Web site and download and install the latest drivers for it and check that it works.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyOr Gloria solution try found here
-
Hi all, I tried to figure out why I got with the Teredo Tunneling Pseudo Interface 10 exclamation point error code and the error code 2 adapter 6to4 31, tried to update driver and somehow changed Teredo to Tun Miniport, can someone help me change to Teredo please? 32-bit Pavilion HP running Vista.
Is something that does not? These errors can usually be ignored.
-
Original title: FSX Activation game
Gentlemen: after years of use in FSX (Microsoft Flight Simulator X). Now, I ran into a problem of Activation. His version of "Unable to Activate Online, a technical problem occurred while accessing the server, license authorization was not successful, we apologize for any inconvenience"... Support for the game ended last year. Is this in any way about this? Or is it temporary problem? "My first post" thank you... P.S. When MS comes out with a new Flight Simulator thanks...
Gentlemen: Problem 'Resolved' I went in FSX.exe properties and on the Compatibility tab, Switched setting the compatibility to Win XP SP3 for Windows 7. And it worked the active game. Thank you
for the info and try to help. Simple, I hope someone else can learn from this. Thank you!
-
Unable to activate XP product key
Computer with Windows XP Media Center 2005. It work yesterday and got a message saying: "this copy of Windows must be activated with Microsoft before you can log on." Tried to activate the wizard activate over the internet. Tells me that the product key is not allowed. Tried to activate by ' phone. Tells me that they are unable to activate the product and put an end to my call.
I contacted the manufacturer of the computer (Packard Bell). They tell me that this is a problem with the operating system.
I use this computer for several years with no problems and was never asked to activate before.
What can I do?
Thank you.
How to activate Windows XP
http://support.Microsoft.com/kb/307890See the section titled: "how to activate Windows XP by phone.
Also, make sure that you do not confuse the letters and numbers (number 8 for the)
Letter B, etc.).How to contact a Microsoft Product Activation Center:
http://support.Microsoft.com/default.aspx/KB/950929/en=usMicrosoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx (this site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxNever be afraid to ask. This forum has some of the best people in the world to help.
-
Unable to activate windows 7 Premium, but have produced authentic
Unable to activate windows 7 Premium, but have produced authentic
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
I m unable to activate windows after formatting my pc 8?
I upgarded windows 7 to windows 8 I bought from microsoft.
but after formatting my pc, I am unable to activate it. It shows error always activate windows.Please help if anyone know the solution.I tried activation by telephone, but he always says "IT MUST BE A MISTAKE TECHNIQUE".Help, please...To install a Windows 8 upgrade version, you must already have Windows 7, Windows Vista, or Windows XP installed on your PC.
If you have formatted the drive until the upgrade of Windows 8 version has been installed, you will not be able to use your upgrade product key to activate Windows 8. To activate Windows 8, you will need to install your previous version of Windows, and then reinstall Windows 8. Help with the activation process, contact technical support.
-
For two days, unable to Google Maps works with Firefox. The page opens but no answer to my questions. A message says "loading... Lai is too long? Look at troubleshooting guide or simplified HTML version. »
No problem with Safari.URL of affected sites
I had the same problem. Reset the browser.startup.homepage_override.mstone in all: config. The problem is corrected.
Maybe you are looking for
-
How the repeating table inside a control valve?
Hello Does anyone know how to make the repeating table inside a control valve in LabWindow CVI? I see that there is option for a Panel to scale content in resizing, but not available for a tab control. Any ideas? Thank you very much! Weiming
-
Windows Vista settings related to the opening of the individual windows where live records
When you are using Windows Vista and I opened the file manager or windows Explorer, it opens in a small window full-screen. Is there a way to change the settings is a window or full screen with its opening?
-
I noticed that the app categories has not been updated throughout the week. I see the top and brute unchanged sections. Same applications. New applications category changed a few days again. Anyone having this problem? I am in North America. All my
-
Map of SM BUS controller not found
The system can not find the driver for the SM BUS controller card. What can I do?
-
Hello I have a stack of 5 3750 x switches installed and I have another place with 1 switch, I took one of the 5 switches (last switch # 5) and he stacked to the stand-alone switch. everything works fine, except for the interfcaces, he continues to co