Unable to capture video from digital camera Sony DCR-HC26

I replaced a PC under Windows XP with a new PC running Windows 7 Home Premium and I was not able to connect my Sony Handycam DCR-HC26 digital tape camera to the new PC.  I use an I-link (firewire) cable.  The camera seems to be recognized by the PC as a Sony DCR-HC26E, but trying to capture the video, the following message appears: "failed to find the camcorder (band). Check the i.LINK to the Handycam. "I suspect a problem driver type is the cause but I'm running out of ideas on how to solve this problem.  Any ideas?

Curry,

I don't understand your suggestion.

1. When you say "entry for firewire (IEEE1394)", do you mean "entry for controllers Host Bus IEEE 1394"?
2. When you say "pilot LEGACY", what is it and where can I get a "LEGACY driver"?  (I clicked on properties for the Texas Instrument 1394 OHCI Compliant Host Controller and did not find anything on "LEGACY").

Bruce

Hey, maybe I can answer this question.
1 double-click on controllers Host Bus IEEE 1394 you will find the appeal of device 'compatible OHCI 1394 host controller ".
2. highlight the 'compatible OHCI 1394 host controller' right click on "update driver software".
3. Select 'Browse my computer for driver software ".
4. at the bottom of the window, select "Let Me pick from a list of device driver on my computer.
5. you can select "1394 OHCI Compliant Host Controller (legacy)" as the driver and then click "Next".
6 fact

Tags: Windows

Similar Questions

  • Unable to capture video from HDV source (Sony HDR FX1) - DELETED FEATURES 13 elements seriously?

    After the purchase of Premiere Elements to capture HDV or DV video and after trying the trial of 12 items, and see the features that I bought the first 13 items, after troubleshoooting and research I discovered they basically stripped this version down to nothing and they sell under the same name of Premiere Elements. It's the wrong principal to say the least, previous versions having these characteristics. Incredible:

    Deleted features first 13 items that were in the first 12 items... aren't you supposed to ADD basic features a new product or to at least provide backward compatibility?

    The following features have been removed in Adobe Premiere Elements:

    • DV capture
    • Capture HDV
    • Timelapse capture (Stop motion)
    • Export to FLV
    • Export to the Web-DVD
    • Block face Pan & Zoom option
    • Interest in Smart trim slider

    So after paying the $$$ I can capture only in old windows movie maker in the file dvr-ms to 1440 x 1080 container (file properties report it to 720 x 480, but this opening in WMP good properties) using the MPEG-2 compression (not good at all for editing... According to the GOP structure) I am quite shocked that they have lowered the bar so low for this product without HDV or even DV acquisition leaves only the WDM capture?


    I guess they need to force users to pay for Premiere Pro now... it's really disappointing,


    What are my options of acquisition. M2T files now? Are there any plans make the product functional again?

    Briang

    This isn't Adobe, rather user to user forum. The frequency of the presence of Adobe in this forum is not defined.

    Adobe solutions for the elements 13/13.1 first condition are cited in the document that you seem to have already.

    Removed the unsupported file formats and features. Adobe Premiere Elements 13

    First elements 12/12.1 is the latest version which has the DV and HDV firewire capture in a Capture of the first elements window.

    You can capture firewire in another software and import of these captures in Premiere Elements with Premiere elements/Add Media project / files and folder...

    Often seen choices for this purpose if Windows is in question

    WinDV WinDV

    HDV Split 0.77 beta HDVSplit

    (HDVSplit split clips must be MPEG2.m2t files)

    Adobe is expected to release a new version of Premiere Elements in a few days/weeks (name should be first 14 elements). The functionality of the new version are not made known until the time of the release of the new version. I have no insider details information. I am not affiliated with Adobe in any way.

    If you need any clarification on any of the above, feel free to ask.

    RTA

  • I can't get CS6 to recognize my Sony DCR-TRV340 camera to capture video from this camera.  CS6 C

    I can't get CS6 to recognize my Sony DCR-TRV340 camera to capture video from this camera.  The CS6 capture Tin can, set up a message that a capture device is offline.  Camera Sony DCR-TRV340 is not listed in the CS6 device Type list in the CS6-DV/HDV cameras Sony device control settings box.  I downloaded what I believe are the right drivers for the TRV340 and when I connect the camera to the computer, the computer shows it is in the box devices and printers, but CS6 do not recognize.  Do I need to install these drivers in a specific CS6 program folder?  If Yes, where can I find these drivers in the Professional operating system of windows 7, and in which folder CS6 would copy their?

    Thanks John,

    The controller IEEE 1394 of switching for the Legacy driver did the trick.  CS6 now recognizes my camera.  Thank YOU MUCH for the help!

    Chuck

  • However, questions to import videos from digital camera to Windows Vista can import images

    Original title: I can't import videos from my digital camera to my computer (Windows Vista), but it will import the photos.

    is there a download I can use to make the computer to import the videos?

    Hi MartCow45,

    1. what program do you use?

    2. what exactly happens when try to import videos?

    3. do you receive error messages or error codes?

    4. what type of files you are trying to import?

    You can visit the following links and check if it helps:

    Can what types of connections and digital video cameras be used to import video?

    http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

    Troubleshoot importing video problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How can I download videos from my DSLR Sony DHV for later editing and the creation of a DVD?  I just installed Adobe software today and can't find anything about it.

    How can I download videos from my camera Sony HDV for later editing and the creation of a DVD?  I just installed Adobe software today and can't find anything about it.

    I am very familiar with Pinnacle, but I've been disillusioned about their support.

    Ian

    First you connect your device to your computer using your Firewire port, then press F1 and search for capture

    http://helpx.Adobe.com/Premiere-Pro/KB/cant-capture-DV-HDV-video.html

    - and more info on Windows http://forums.adobe.com/message/4708997

    -Legacy driver http://www.studio1productions.com/Articles/Firewire-1.htm

    -All versions of Windows from 7 to 10 need legacy driver!

    This is old, but still a good place to start - CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has many links to help learn... including how to still get to create a DVD

  • Unable to capture video PE 3.0

    I use Prime Elements 3.0 and am unable to capture video from my DV camcorder. I've gone through all of the instructions that might relate to the problem and have re installed the program. When I go to capture a video, at the top left of the screen indicates "Device of Capture offline" but can I start and stop my camera with the buttons on the capture screen. The video button get is not active. It will not download. Once again if cross start the statement with no result.  The use of program work very well, but I the have not used in a while. Any suggestions?

    A few questions:

    You have the 3.0.2 update?

    What brand/model of camera?

    Windows give you the sound of "bing-bong", when you have the device connected FireWire and you turn it on

    Learn what the manual mode of the camera allows you to set the camera to capture?

    Good luck

    Hunt

  • How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card?

    How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card? (I am running windows xp professional).

    PS - I'm a senior and not warned, any computer do pls 'non technical' answers as possible.

    Thanks in advance for the answers to my question!

    Hello Fred!

    • First create a new folder by right click on an open space on your desktop
    • hover the mouse over the new, & click on new folder
    • right-click on the new folder and choose Rename
    • write your selected folder name
    1. Connect your data cable USB & POWER to the camera or insert the memory card
    2. Open the files and Select the files you want to save
    3. Select files butten now the mouse left click and move the mouse over the files
    4. then right click on the selected files and click copy
    5. go to the folder you named and open
    6. right-click and select Paste & that's it!

    I hope this works!
    Do not hesitate to ask, I don't mind!

  • Unable to capture video with the Canon Vixia HV40 HDV - why?

    I am unable to capture video HDV via Firewire to my Cannon Vixia HV40. I am running Windows 7 Professional 64 bit on a computer HP DV6T Quad Edition laptop, using the native Firewire interface. I can capture DV standard definition without problem (when the unit is set to DV mode, Windows detects the device and the guests of action - if you select HDV mode, Windows does not, and the camera does not appear in Device Manager).

    So far, I tried to capture HDV in Sony Vegas, Windows Live Movie Maker, Cyberlink PowerDirector 7 and finally HDVSplit (considered as the common denominator of simpler, the lowest for the capture) without success. NOTE: the camera IS recognized in HDV mode. In all the above applications, I can go back, play and fast forward - there's a link that works at least at this level. When I try to capture HDV, I get different results - no success. HDVSplit starts playback on the camera and stops after 3-4 seconds, indicating that no data has been transferred from the camera. If I turn off scene detection, capture runs indefinitely, but the generated file is never more than 0KB. Director of Windows also appears to capture, but the file is still 70 KB and is not valid. Sony Vegas, same, begins the capture but never see any video. CyberLink Power Director, somehow, HDV recorded once a band - and can always record a live camera HD stream.

    I tried a lot of things:

    1 using the older driver 1394
    2 turn HD/HDV
    3 reinstall the capture software
    4 press the 'PLAY' button first, then enable "record", then the workflow is running.
    5. install the Canon software (despite the fact that it contains all drivers for camcorders) - in fact there is no driver for the Canon Vixia HV40. It is supposed to work with the Windows 7 driver. I tried both (W7 and legacy) with the same result.

    The Canon Vixia HV40 is documented as supported in Windows 7 by Microsoft and Canon - and yet there are many people on the Internet claiming to have this problem (although some people report no problems at all). I am sure that I do not see a 'Pink Elephant'. As this is a forum for Microsoft - I would be happy if I could capture in Windows Live Movie Maker - to keep the inconsistencies of the third part of the road. What should I try next? Is there a 1394 a generic driver that is certified to run on Windows 7?

    I went and hooked the camcorder new just to make sure that I can hardly believe it is now capture HDV. Perfect work. Believe me, I've tried evey solution I could find on the internet and it is the only one that worked for me. I found the solution on this forum and started to find only no sooner. I've only used it with Pinnacle Studio 12 so far... never mind, I just tried HDV Split and it works too. I had also planned to buy a SIIG NN-EC2812-S2 and if it had been less expensive, I did not hesitate. I tried from Best Buy's Dynex Express card, but he had the camera recognition problems and sent. I thought that you get what you pay and was actually looking for the best price on the SIIG when I came across the solution. I wish you good luck.

  • How to capture video from my tuner to go to Movie Maker

    Original title: Windows Movie Maker on Vista: "capture video from Device.

    I'm trying to convert my VHS videos in files that I can store on the hard drive of my PC.  I have my VCR connected to my TV Tuner from Dell, which is connected to the USB port on my Dell.

    Supposedly, I should be able to capture video VHS with Windows Movie Maker.

    However, why the Windows Movie Maker (version 6) on Vista doesn't have a "vidéo Capture Device" option in the file Menu?

    Use the program youre using this tuner. Change to whatever you have plugged in (perhaps S-video or something). Video capture of Movie makers is usually for FireWire cameras / maybe USB. But not a USB tuner

  • someone please help me restore the photos deleted from my camera sony cybershot

    someone please help me restore the photos deleted from my camera sony cybershot downloading on computer. Are there any hidden folder in drive g as basket in pc from where deleted photos can be restored

    N ° when the photos are removed from the Flash of the camera, they are gone.

    If you have not done something since then with the camera, you can download the software on your computer that may be able to recover deleted photos, or you can send the somewhere flash memory card that can do it for you.

  • Y510 unable to get data from the camera.

    Hello

    I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

    Thank you

    Peter

    I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

  • I can hear a wav file, but could not get the video from my camera.

    original title: file WAV on Vista

    I can hear a wav file, but could not get the video from my camera.

    I have windows vista?

    Hello
    WAV files will be audio only.
    You can save this file as an MP4.
    B Eddie

  • Windows Media Player 11 is not play videos from my camera

    I have problems with my Windows Media Player 11. It does not correctly play my videos from my camera. I can hear the sound but nothing appears. I hear the sound but no video. There is no error message. I can play in Quick Time, but not on Windows Media Player.

    If the video file extension .mov...
    Windows Media Player is not natively compatible.

    The 3ivx decoder is supposed to enable WMP to
    play Apple's QuickTime .mov files...

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    decoder 3ivx (not freeware)
    http://www.3ivx.com/download/
    (Windows 2000 - XP - Vista)

    3ivx MPEG-4 5.0.2 Decoder (not freeware)
    http://store.3ivx.com/3ivxStore/product_details.php?ID=11
    (Windows 2000 - XP - Vista)

    The components of the 3ivx decoder read
    most MP4, M4A, 3GP, MOV and AVI files
    with Audio MPEG-4 video and MPEG-4 AAC

    Also... the following freeware players can play QuickTime .mov files.

    Apple QuickTime
    http://www.Apple.com/QuickTime/Download/

    QuickTime Alternative
    http://www.filehippo.com/download_quicktime_alternative/

    VLC Media Player
    http://www.videolan.org/

    Media Player Classic
    http://www.filehippo.com/download_media_player_classic/
    (just unzip and run it... (no installation required)

    Media Player Classic Home Cinema
    http://MPC-HC.sourceforge.NET/

    If you want to install a pack of codecs... one of the following
    may be worth a try:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Proceed at your own risk *.

    Media Player Codec Pack
    http://www.mediaplayercodecpack.com/
    (Windows XP - Vista - 7)

    K - Lite Codec Pack (full)
    http://www.filehippo.com/download_klite_codec_pack/
    (Windows XP - Vista - 7)

    Windows 7 Codec Pack
    http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
    (Windows XP - Vista - 7)

    Info on CCCP (combined Community Codec Pack)
    http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
    (Windows XP - Vista - 7)

    Good luck...

  • No sound after importing video from the camera to Windows Movie Maker

    I imported a video from my camera in movie maker so I can change the direction of the video to share. When I do I play but without audio. How to fix this problem?

    Sounds like you have a compatibility issue with the
    video file. If convert you to WMV format before
    import into Movie Maker, you can get a better
    result.

    There are to many converters available on the net...
    the following links are some examples.

    Proceed at your own risk *.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    (1) format Factory (freeware)
    http://www.videohelp.com/tools/Format_Factory
    (the 'direct link' is faster)
    (the file you want to download is: > FFSetup260.zip<>
    (FWIW... installation..., you can uncheck
    ('all' boxes on the last screen)
    (Windows XP / Vista / 7)

    First, you will need to decompress the file or just open the
    Drag FFSetup260.exe out of the folder
    and drop it on your desktop. To install left click.

    (2) Freemake Free Video Converter (freeware)
    http://www.Freemake.com/free_video_converter/
    (Windows XP / Vista / 7)

    (3) Xilisoft Video Converter
    http://www.Xilisoft.com/video-converter.html
    (not freeware but receives good reviews)
    (Windows XP (SP2 or later) / Vista / 7)

  • IMPORT OF IMAGES FROM DIGITAL CAMERA

    I'm running on Vista and since the update of my safety on Norton 360, I can't load pictures from digital camera.  I had no problem before this installation with more than 4,000 pictures on my computer

    I'm running on Vista and since the update of my safety on Norton 360, I can't load pictures from digital camera.  I had no problem before this installation with more than 4,000 pictures on my computer

    =====================================================
    I have not personally experienced this Issus so cannot check the following solution.

    There is discussion on the site of Norton uninstall/reinstall your USB drivers
    may fix this problem.

    The following article offers instructions:

    Reinstall USB drivers
    http://Acer-UK.custhelp.com/app/answers/detail/A_ID/471/~/reinstalling-USB-drivers

    If you want to find the Norton Community FYI here is the link:

    Norton community
    http://community.Norton.com/

    If you decide to try it... Let us know the result.

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

Maybe you are looking for

  • How to unlock your Mac with your Apple Watch

    Hello How to unlock your Mac with your Apple Watch? my mac: MacBook Pro (13 inch, late 2011) MacOS Sierra 10.12 I can not found "Allow your Apple Watch unlock your Mac" in security and privacy Thank you

  • How can I change the language in firefox 18.0.2?

    I downloaded firefox... but it came with other language rather than English... How can I change?

  • MacBook pro 13 "stops after apple logo

    -Macbook Pro 13 "(end of 2014) with El Capitan After I did a reboot of the machine now my macbook OS X won't start, it just shows essentially the apple logo and a loading bar, and after a long period for the load bar (which is not normal) to arrive a

  • How to store the value in labview

    I write a VI and need set a reference point before I have my operation. Is there a way to hold the values for all 8 channels I am able in a constant number at the push of a button? If I had this, I might just have the VI subtract these core values on

  • Windows XP Professional Disc is bad. How to make a copy?

    While Re-Installing Windows XP I have incountered an error indicating that the installation disc is bad and cannot be read. The drive worked for the first three steps up to the installation preparation. During the stage of installing Windows with 39