Unable to connect a printer cable wireless PC networking wireless/wired

Similar Questions

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• Dell Inspiron 2650-system of operating Windows XP. I am unable to connect to the internet. Status: Network cable unplugged. Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  The network port is the port on the laptop (it is not that large - look around) that looks like a large phone connection.

  You have a router/network to connect to and a cable network to connect with?

  Look at the 'Network option' part of the poster:
  http://support.Dell.com/support/eDOCS/systems/ins2600/placemat1.PDF

• Unable to connect my printer (HP Deskjet 3052 a) wireless

  original title: wireless printer

  Purchase a printer HP Deskjet 3052 has and can't get my Toshiba Satellite phone so he could work. Will not work using the USB cable or wireless. Any Advisor. Downloaded the software and also used my cd, but the computer shows it's there, but when I go to print said I need to select the printer. When I do it does not help because it does not find.

  You have perhaps confused things by trying to connect with the USB connection or wireless.

  Subsequently, I guess you have a wireless router.  What is the make and model?
  Or are you simply trying to connect wireless to the printer WITHOUT a wireless connection between your computer and the Internet (i.e. without a wireless router)?

  If you click Start > devices and printers, do you (a) see an icon for the Deskjet printer, (b) see two icons for the Deskjet printer or (c) not see some icons for the Deskjet printer?

  Assuming that the answer is (a), right-click on the icon, select "Printer properties" and click on the "Ports" tab

  By ensuring NOT to click in the list of ports, use the scroll bar on the right side so that you can see the line with the box checked.  What he does say to the title of 'Port' and 'Description'?  You will have to perhaps to click and drag on the low vertical line in the header (between the word 'Port' and 'Description') in order to make the column wide enough to view the entire entry).  Click Cancel to exit the printer properties dialog box.

  Now, go to the printer.
  Print a Network Setup page:

  1. Press the wireless button to display the wireless Menu.
  2. In the wireless Menu, select print reports.
  3. Printing reports, select the menu Configuration.

  What is reported as the IP address of the printer?

  You can also print the wireless network test report:

  1. Press the wireless button to display the wireless Menu.
  2. In the wireless Menu, select print reports.
  3. In the printing of reports, select Test Wireless.

  The manual of your printer is not an example of these two reports, so I'm not sure what will be included.  On one or the other (if there are not two), it should show the name of your wireless network.  T it?

• I am unable to connect to my router wirelessly to parents. I tried to reset the modem and the router and it still does not work.

  Presented labtop parents and can connect via ethernet, but still cannot connect to the wireless router. Ive rebooted both the modem and the router and ive also unplugged the power source. Help, please...

  original title: unable to connect to the wireless router?

  Hi Brandon,.

  What operating system do you use? (Windows 7, Vista, XP?)
  You receive any type of error message when you try to connect?
  What exactly happens when you try to connect?
  You receive an internet connection when you connect with an Ethernet cable?
  There are a few good troubleshooting in this thread. I suggest to look to see if it helps at all:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-a-wireless-network-Windows-7/734ecdef-99fb-4862-b63a-04cfa448cc06

• Unable to connect to the drop folder digital network after the installation of the new wireless router

  I have already scanned to the folder of network of digital repository on a printer HP 8500 wireless, connected to a wireless G home network. However, I recently bought a new superisolants wireless router and am no longer able to use the scan function. I now get an error message that says: unable to connect to \\Computer\Folder Make sure the remote computer is turned on. The printer on the wireless network and works very well except for scanning to the folder of the network of Direct deposit. Thank you.

  I called HP tech support last night that had me add IP address of the printer to the McAfee Firewall as an approved connection. Digital archiving to the network folder scan function works now.

• How can I connect Epson printer by wireless to 2wire modem from Bell?

  Hello there, I would like to ask how can I connect my Epson printer to my new internet network from Bell? In fact, I used more then one of Rogers, their internet service connected to the decoder of Rogers cable, in the meantime, I used wifi router connected with printer, but currently, I went to the Bell company, Bell connect system is difference, their modem was Bell 2WIRE, they had wifi build in for all my cell phone in the House. Simply because with the new Bell network, I could not turn on my wifi printer, can everything you help me fix it? Please... Thank you and have a nice day.

  WinneTran

  Hi WinneTran,

  You can see the following article on the Epson printer on wireless network connection:

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

   

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

   

  Add a Bluetooth device or other wireless or network device: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Satellite Pro 6100: unable to connect to internet via wireless network

  Have had some problems with the audio device Yamaha for another thread, which now seems to be resolved. Thank you!

  However, do not know why, but now unable to connect to the internet via a wireless network, although the router works well as another computer in the House is connected wireless.

  When you check the available wireless networks it comes up with "no wireless networks were found in range, make sure that your computer's wireless switch is on.
  Where to check it, can anyone help?

  Thank you

  On the left side, there is WLAN switch. Make sure that the switch is in on IT. After doing this using FN + F8 key combination and activate WLAN device.

  After having done that, you should be able to see the WLAN networks available in your area.

• Connection and printer cable

  I need cable for printer officejet 4500 G510a series. Can not locate one in any store. They gave me the printer without any accessories.

  Also need the instruction manual to connect the printer to the computer - disk drive does not work properly.

  Hello Lisa_Veale

  First of all, you can find the manual here: Officejet 4500 manual.

  You can order are available from the shop online from HP.

  Cable USB 9 feet

  Cable USB 6 feet

  If you need the software because your hard drive does not work you can get them at the link below.

  Software Officejet 4500

  I hope I've been helpful!

  If you have more questions please post back.

• EA3500 unable to connect USB printer

  I'm unable to connect to a printer using the USB port on my new Linksys EA3500 router.

  I followed the instructions here: Support Page , but my version of Cisco Connect not not the option "connect a USB printer»

  I'm on a macbook pro OSX 10.7.4 and my version of Cisco Connect is 1.4 (12005.2). Version of the firmware on my router is 1.0.30.126544. A screenshot of what I see after having clicked on "Add a device" in Cisco Connect is below. The printer is a HP DeskJet F4280.

  

  Please notify.

  Thank you.

  I began to question my purchase of this router, as it was rather costly unitl a mod contacted me and asked me to try to update my firmware again. This time, there was an update available installed tonight firmware Cisco Connect Cloud (version 1.1.38.138143) that I was able to connect my USB printer. I know that this sounds like a commercial of Cisco, but the Cloud Connect software and interface is amazing! It's a management tool complete recommended router on the web making it pretty useless old Cisco Connect.  Cisco thank you, I am happy that I now have a refreshed and awesome router! (which printed on my printer usb too)

• Satellite A300 - 12K unable to connect to the ADSL wireless modem

  My Satellite A300 - 12K suddenly cannot connect to a dsl wireless modem... There are no changes made to the parameters of
  However it connects to a modem that is not encrypted.

  Any idea what the parameters might have changed?

  Hello

  Why you n t reset the modem and check the settings?
  Configure encryption of the modem settings and encryption settings of the WLan card.
  Check if you are using the right key and change it if necessary.

  Sorry but there is no magic answer for you question, we must check everything and if necessary you must reconfigure everything!

• Unable to connect to ground or wireless network

  I can't connect to my land or wireless network.  I tried to connect through my laptop to work and land / wireless worked as expected (e.g. problem is not with the router).  Previously, I was able to connect to the network via my computer at home.  Some information:

  1. I get the following message when I consult my network connections:

  "Connection status: unknown.

  The dependency service or group was able to start. »

  2 Windows cannot find any wireless networks in range.

  3. I tried to use Windows Network Diagnostics and the message I got was "The Windows Wireless Service is not running on this computer."  I tried to start the service, but couldn't.

  I would appreciate any you can give troubleshooting tips!  Thank you.

  Hi Kelly1986,

  1. what happens when you try to connect by using wired connection?
  2. do you have security software installed on the computer?
  3. did you of recent changes on the computer?
  4. What is the error message when the service started?

  First of all, I would say that check you what happens when you connect using the wired connection.

  Check also in mode safe mode with Networking if you are able to connect to internet using wired connection.

  Steps to start in safe mode with networking
  1 restart your computer if it is running.
  2. press the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. Select Safe Mode with network and pressenter.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Disable the security software on the computer and try to start the service and check.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If you still cannot start the try running SFC scan service that would have a search system files corrupted on the computer and replace them.

  For more information please visit the link below.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Go back with the results!

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to get the wireless event ID: 8002 task category: AcmConnection; Event ID: 12013, event ID: 11006

  Hello

  I have a Dell Latitude E6440 Win 7 Enterprise 64 running on a domain. It will connect to an unsecured network, and he can see the secure network in the list when I click the icon for the wireless connection on the system tray. When I go on manage wireless networks, the secure network is not displayed (and so I can not delete the network to try to add new). Normally, we would add the network protected here. I click Add, type the name in the correct syntax, add the necessary information (2/WPA-Enterprise TKIP or EAS) and click Next, it returns immediately with "an unexpected error has occurred." The same thing happens when I hit the connection in the list of available networks that appears when I open system tray icon: he said that it was impossible to connect, when I hit the Troubleshoot, it is said that he could not identify the problem. The event log shows error below. I could not find any resolution here or elsewhere who respond to the fact that I can connect to networks unsecured wireless, but unsecured wireless networks.

  Other notable troubleshooting procedures:

  • Uninstalled/Reinstalled with the latest wireless adapter driver
  • Other laptops may have access to the same secure wireless network
  • The first configuration error automatic WLAN in the event log is event ID: 12013, attempting authentication 802. 1 x. Then the event ID: 11006; declaring "explicit Eap received to fail". After a few days of alternating every 3 errors, they started only error event ID 8002.

  Log name: Microsoft-Windows-WLAN-AutoConfig/Operational
  Source: Microsoft-Windows - autoconfiguration WLAN Service
  Date: 04/06/2014 11:53:55
  Event ID: 8002
  Task category: AcmConnection
  Level: error
  Key words: (512)
  User: SYSTEM
  Computer: [ComputerName. AREA]
  Description:
  Autoconfiguration WLAN service cannot connect to a wireless network.
  Network adapter: Intel Centrino Advanced - N 6235 Interface GUID: {f27af762-dff8-4927-84e0-7f4ade30dcc9}
  Connection mode: connect to a network secure without a profile profile name: [NAME of the SECURE NETWORK]
  SSID: SECURE NETWORK [SSID]
  Type BSS: Infrastructure
  Reason for the failure: the specific network is not available.

  The event XML:

  8002

  0

  2

  24010

  191

  0 x 8000000000000200

  1475

  Microsoft-Windows-WLAN-AutoConfig/Operational

  [COMPUTERNAME. AREA]

  {F27AF762-DFF8-4927-84E0-7F4ADE30DCC9}

  Intel Centrino Advanced-N 6235

  Connect to a network without a profile

  [NAME OF THE SECURE NETWORK]

  [NAME OF THE SECURE NETWORK]

  Infrastructure

  The specific network is not available.

  163851

  0 x 6

  Hello

  The question you posted would be better suited in the TechNet Forums. Large networks, domains and windowsserver questions version are supported via TechNet so best to check with Experts there. I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?filter=AllTypes&sort=lastpostdesc&brandIgnore=true

  Hope this information is useful.

• Unable to connect via radio - impossible to obtain network address

  All,

  I had to restore this laptop due to virus problems (my daughter system..).  I have put back it and it works except that I am unable to connect to the wireless network.  It says 'Acquiring Network Address' and goes then to the "Limited or no connectivity."

  Here are the details:

  System:

  Inspiron 1300 - XP Pro SP2

  Dell Wireless 1370 WLAN Mini-PCI Card

  Parameters:

  o use Windows to configure the verified wireless network

  o in Dell Wireless Utility, unchecked "let this tool manage your network."

  o WZC: start & automatic

  o TCP/IP: Obtain IP automatically and obtain DNS automatically

  I took action:

  o reloaded all drivers available for my service tag, including the pilot for

  the network card

  o went through all the Dell relevant troubleshooting steps

  o I have a different laptop that connects to the wireless network and I

  compared the parameters between the systems of work and non-working - they

  seem to be the same (another pc and card)

  o the 'bad' system can connect to the network via ethernet cable

  The status bar displays the network icon (pc screen) with yellow trinangle and!

  and 5 green bars for the network card has an excellent signal with unknown status.

  I'm not clear on the question of whether Windows or the utility of the card should be network management; I tried both to no avail.  I'm basically out of options to try and hoping someone can help me.

  Please let me know if there are any additional necessary information.

  Thank you in advance for your help!

  
  

• Unable to connect to Xbox 360 via the network.

  Original title: network host down

  OK, so I have my xbox 360 and a laptop of HP under win7 set up on my home network to my dell PC winVISTA.  One day the network just stopped working no real reason.  The xbox and the laptop can connent to the internet but do not communicate with each other.  Pls help and nothing changed just, it stopped working.  The xbox is my media hub and my laptop for work, this is all very frustrating.  Thnx in advance for any help.

  Hello

  1 have you made changes to your computer recently?

  2. what happens when you try to connect between computer and Xbox 360?

  I suggest you follow the methods and check if it helps.

  Method 1: Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Links and check if it helps.

  Xbox LIVE connection problems
  
  http://support.Xbox.com/en-us/pages/Xbox-Live/troubleshoot/connection-issues/connect-Xbox-Live.aspx
   
   
  Error: Unable to connect to your wireless network
  
  http://support.Xbox.com/en-us/pages/Xbox-360/troubleshoot/KB/error-cant-connect-wireless-network.aspx?kbid=978945
   
   
  Xbox LIVE connection errors troubleshooting
  
  http://support.Xbox.com/en-us/pages/Xbox-Live/troubleshoot/connection-issues/errors.aspx