Unable to connect Bluetooth devices

Similar Questions

• Why the memo does not play on a connected Bluetooth device device?

  Why can't I read my voice memos on a connected bluetooth device?

  What type of Bluetooth device? What happens when you try to read this memo?

• Unable to connect any device bluetooth on my windows vista, go to bluetooth devices but the drop down menu will not drop

  Original title: mouse bluetooyh
  Unable to connect any bluetooth devices on my computer windows vista, go to bluetooth devices but the drop down menu will not drop iam so unable to connect any bluetooth. any suggestions

  Hello

  read these tutorials on how to set up bluetooth

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Here are solutions to some common problems with Bluetooth devices.

  You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  f the foregoing does not fix it contact the manufacturer of the device

• Unable to connect bluetooth Stereo Headset for Vista SP2

  Hello

  I use HP Pavilion DV6000 with integrated bluetooth module

  also I got also an A2DP bluetooth car kit in my car I used as stereo bluetooth several times with my cell phone and other portable

  but I don't have to connect it with my HP pavilion computer even if it is paired and recognized BUT received no CONNECT in the right click menu or properties

  the difference of ONLY between my laptop or other computer, tried s than mine recently upgraded to the Vista SP2

  tried the http://support.microsoft.com/kb/970408 update, but did not help

  Need your help

  Thank you

  UPDATE!

  Well, looks like I found a work around for this problem... It seems that the problem may be how some protocols are initialized.

  What has been done differently:
  Firstly, I uninstalled the software of Broadcome of the control panel without removing the installed bluetooth drivers. Go into the Device Manager, I have disabled the Microsoft Bluetooth Enumerator, and THEN proceeded to reinstall the Broadcom (6.3.0.200) software. During the installation I noticed a few differences, such as additional steps in the installation and new options being installed just to do this step.
  Stereo works! :
  Work with my bluetooth device with the disabled enumerator however resulted in matching errors and the connection of my headphones to the audio gateway. Then I enabled it, then connected using the shortcut placed on my desk and instantly had stereo bluetooth.
  The solution for MY problem:
  After disconnection and reconnection, it would not pair in stereo, so I worked around this by disabling the enumerator, reactivation, and then you reconnect. Stereo audio worked properly...
  Hope this helps all users as well as the Microsoft team to find something to prevent users from having to implement this step.
  Thank you!

• Unable to connect Bluetooth mouse error Code 0 x 80070015

  Title of the Moose: 0 x 80070015

  Bluetooth mouse does not connect and displays the error code 0 x 80070015. How can I fix?

  Hello

  ·         What is the brand and model of the mouse?

  This problem may occur when there is a problem of compatibility between the transmitter and the battery Microsoft Bluetooth. Or, it can occur if the computer uses a stack non-Microsoft, and this battery is not compatible with the device of the Bluetooth mouse.

  Method 1: Follow the steps mentioned in the link below

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note:

  The link above also applies to Windows 7.

  Method 2:

  To resolve this issue, contact the manufacturer of the laptop to see if their transceiver works with the Microsoft Bluetooth stack. In addition, ask the manufacturer how to add devices using the Microsoft Bluetooth stack. If the device Microsoft included its own transmitter/receiver, you may need to use the Microsoft transceiver for this problem.

  You can check the link below

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

• Unable to connect Bluetooth speakers with Windows 7 system

  Dear experts,

  I have a laptop HP Pavilion DV7-2014TX running Win7 Ultimate.

  I just bought a new Bose Bluetooth headset. I tried for 2 hours to try to pair it with my phone, but my laptop is not all bluetooth devices.  I tried as much as I know, but I'm out of ideas. The only thing that I think now is that my laptop is old enough that it is no longer compatible with the version of bluetooth on my helmet.

  Any help would be welcome, thank you.

  George

  Original title: Bluetooth

  Hi George,.

  Thanks for posting your query in Microsoft Community.

  I understand that you can not use headsets Bluetooth of Bose enabled on Windows 7, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You are able to connect and use another Bluetooth device on this computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  The question may arise due to the incompatibility with the Bose headphones Bluetooth driver. Then I suggest that you try the following steps Diagnostics to find out the root cause, apply patches, and check if the problem persists:

  Method 1:

  Try to follow the steps in the following link to resolve the problems with Bluetooth devices:

  The problems with Bluetooth devices

  (Note: article also applies to Windows 7)

  Method 2:

  If method 1 does not work, try to run the patch that is available in the following link and look for the question.

  Bluetooth devices do not work correctly on a computer that is running Windows 7

  Method 3:

  Alternatively, you can try to check if the Bluetooth support service is running.

  1. Click Start, type services.msc in the Start Search and press ENTER.
  2. In the list of services, double-click the Bluetooth Support Service.
  3. Change the startup to Automatic type, then click Start to start the service.
  4. Click on apply and then click OK.

  Trying to connect Bluetooth speakers with the computer and check if the problem persists.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Unable to connect IDE device after upgrade to 10.3.1

  Hi all

  I had updated the BlackBerry smartphone to 10.3.1, and after the upgrade, I am unable to connect my machine to Momentics IDE or deploy an application on the device of comand prompt.

  When I try to deploy from the command prompt, I get the following error.

  Error: Cannot connect: Connect to /169.254.0.1:443 timed out. Please check IP address settings for the target. You may have to reboot the target.
  

  Development on my device is set on IT.

  Concerning

  I had mode developer cross checked several times, but without success.

  Problem is solved.

  I deleted the data unit and then installed the upgrade pushed by Blackberry. Magic happened and it started working.

• Unable to connect bluetooth mouse windows 7

  Recently, I bought a bluetooth mouse and now I have trouble with plug it on my Windows 7 32 bit. I tried Control Panel -> Devices and Printers -> Add Device but no device was found. I also tried Add Bluetooth Device button but with the same effect.

  First of all, she perfectly connected and worked on Ubuntu 14 so all goes well with the material. I see bluetooth module in device (with Microsoft Bluetooth Enumarator) without exclamation point Manager, so I think the drivers are fine. My bluetooth support is enabled and works. I pressed on turn on bluetooth button on my laptop. I checked allow bluetooth devices to connect in the bluetooth options. I also tried setting the system account on the LOG support bluetooth service - no effect properties tab.

  Then I pressed on disable adapter in bluetooth settings and somehow it found all my bluetooth devices I don't know what happened, but my mouse worked for a short period. Then my PC told me he needs to restart. After reboooting, the mouse did not work. Once again. I opened bluetooth devices tried to delete and add mice once again, but he says that it is impossible to install bluetooth hid device driver . But at least he saw my devices at this time. So I decided to update the bluetooth drivers, restarted and now he sees nothing. Once again.

  I reinstalled the drivers, I tried to restore drivers update, but this did not help, I can't even get back to the State when windows saw the mouse

  Thanks for your reply, Antoine S

  1. What do you mean? Of course, I made some changes in comparison to a new installation of windows, such as installing applications. Only, I had not had before bluetooth mouse so I don't know if the problem exists since or not.

  2. No, bluetooth don't see not all bluetooth, not only the mouse devices

  3 4Tech, BT-630

  4. Yes, it works perfectly on another computer and even on my computer under different OS (Ubuntu 14)

  I already tried everything, links. Nothing works.

  I don't know what happened but I just rebooted and suddenly my PC found my mouse. Now everything seems fine. Thank you!

• Unable to connect Bluetooth headset

  Original title: need help on the BlueTooth device and other things about that.

  Hello

  I'm in a position really distressed, so, basically, last year (about 2013 November), there were a few problems in sending files from my laptop to my phone, so I thought that bluetooth driver does not work properly, I don't remember anything correctly. I have a Dell XPS 1404 (or something, this is a fine model of 2010). So I thought that and uninstalled this driver in Device Manager, which was a BIG mistake. It was a Broadcom driver as far as I remember, or such. I tried to install the latest driver at this time there, but could not do so, there was a mistake. Now, I can't connect my BlueTooth headset to my laptop and when I connect the DELL BT travel mouse, it connects, but the problem is, the cursor is not going fast, I really don't know what to do. I tried the system restore, but it doesn't have an option for nearly a year there. Please do help me. Now when I go to device, under Bluetooth Radios Manager, there is a pilot who cannot start the device or other, there are only 3 drivers at the moment. I don't REALLY have to remember there's 3 or 4 before one year. Any solution to this?

  AND when I go to the properties for this driver of non-working (which I tried to install both types of drivers on it, then this might work, but there not at all), and when I go to details > hardware IDs, this is the ID, do work to tell what is the real device? or is it about the driver?

  BTHENUM\ {0000110a-0000-1000-8000-00805f9b34fb} _VID & 0001000f_PID & 0000
  BTHENUM\ {0000110a-0000-1000-8000-00805f9b34fb} _LOCALMFG & 000f

  Thank you in advance, hope, I get a response soon.

  Hi Moriya,

  Please keep us updated and my apologies for the late reply.

  If the troubleshooting methods didn't it it helped, I recommend that you contact the manufacturer of the Bluetooth device to check the latest version of the driver that is compatible with Windows 7.

  Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Unable to connect bluetooth microsoft (Yosemite 10.10.5) mouse

  I use Yosemite 10.10.5 on an iMac "mid-2007".  I recently bought a Microsoft Bluetooth Mouse.  When I try to connect, Bluetooth does not recognize the mouse trying to connect with him.  If there is anything I can do otherwise than throw the mouse, I would welcome any suggestions!

  Hello

  It happens the same thing for me. I'm on Mac OSX 10.11.6 El Capitan on a MacBook Pro (13 inch, late 2011).

  I have a Microsoft Bluetooth mouse 3600 (https://www.microsoft.com/accessories/en-us/products/mice/bluetooth-mobile-mouse-3600/pn7-00001) which, under the plug is compatible with MacOS 10.10 (it was the last version for the moment).

  The problem is that my mac does not detect the mouse, so that I can detect it other windows.

  Is it possible that, regardless of the OS x version, the version of bluetooth mouse (4.0) does not work with MacBook of 2011? I checked my version of the laptop was the last of them using bluetooth 2.1.

  Thank you

• Satellite A305-S6825: unable to connect Bluetooth to a wireless mouse

  Hello!

  I'm from Russia and I recently bought a portable Satellite A305-S6825 my friend in the United States (and is not on sale in Russia yet).
  Everything is OK except one thing - I can not connect Bluetooth to a mouse wireless (of course active and put just nearby).
  I went on Bluetooth in "Bluetooth settings" but whenever I press the button "Add a new connection..." I see the following statement appears on
  the display "BLUETOOTH IS NOT READY." But how to make it "ready"?

  This problem really intrigues me.

  Many thanks in advance for me have helped!
  Looking forward to get a quick answer!

  Sergey
  Moscow

  Maybe I'm a little confused, but use BT, to BT mouse too. I'm afraid that your laptop has no BT.

  In addition, Googling around, I found this page. Is this the right specification for Satellite A305-S6825?

• Unable to connect to Device Manager

  I just bought this Clip + 4 GB yesterday for my upcoming birthday, I connect the device to the computer and my device manager will only read my Clip + not at all. I mean not even a usb detection or whatever it is. I downloaded the firmware and put the unit in and it says please plug in device player. I looked in the device via a right-click Manager and selecting manage desktop and which does nothing, it displays the listed device, but how come it does not appear as being read by my OS. IM using Win XP SP2. I have not the slighest clue what Im doing, I spent all morning trying to read messages from the forum for help and couldn't get a direct output to get an idea of what I'm doing. When I plug the device on my computer using the USB of the msg on the screen says 'writing '. Unlike my USB key, I can just plug it into the computer and it will say new detected device.

  Sigh, worst comes situation that I might as well return to the store that I bought. It's really pathetic, I spent 4 hours trying to get this thing to connect. Too much frustration.

  If you react like your USB, go into the settings > system settings > USB mode and select MSC manually.

  Connected in this way your computer "sees" as a similar storage device. You can simply drag & drop files from your computer to the music folder (you will probably need to tell Windows to "uncover" hidden folders & files) on your Clip +.

• Unable to connect new devices to the network

  I have a WRT610N which does not allow me to connect all devices to the wireless network. He is a recent problem I was able to connect new devices before. Devices on the wireless network, those who have been on the network are able to disconnect and reconnect. That new devices are excluded. Went through the admin screens to see if something is wrong, but can't find anything. Any suggestions?

  Disable wireless security all the and try to connect with any temporarily.  Make sure that the MAC address filtering is DISABLED.  If you can connect now to go back and add the security on.

• Unable to connect Bluetooth headset direct Apple Watch 2

  None of my Bluetooth headphones is directly connected to my Apple Watch 2.

  They connect successfully to both my iPhone on iOS10 and my IPad on iOS9.

  Thank you

  Gary

  Hello

  It can help to turn off pairing your headphones for your iPhone / iPad before their pairing at your Apple Watch.

  Also, make sure you put your headphones in pairing / discovery mode, in accordance with the manufacturer's instructions.

  It can also help move the watch and the helmet away from any device Bluetooth enabled when their pairing.

  More information:

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

• Unable to connect bluetooth BH-700 headset for Intel Centrino wireless n-1030 Bluetooth properly (without audio or feature after pairing)

  I spent countless hours trying to figure why my new bluetooth headset (which matched perfectly my evo 4g) not be will pair correctly with my 1030 n.  From what I understand, some have speculated that this is because it lacked the A2DP Protocol from the driver or I have to configure a COM port.  I deleted and reinstalled the device a half-dozen times as well as research in audio playback devices (where it is not found) for trying to run after he pairs.

  To be as clear as possible, I can "pair" the device, it installs successfully the "pilots", but I can't use to listen to music or run any other useful function.  If someone can think of a solution to this, I'd appreciate it.  I talked to the CSR at LG who suggested I look on google to find out how to enable an A2DP connection with the device, but I can't find anywhere, anything that even partially solves this problem.  I found only 2-3 others with this problem and no one has found an answer, but I thought I'd take my chances.  Thanks in advance.

  The Bluetooth A2DP module is usually supplied with most non Microsoft Bluetooth systems.  Microsoft seems not to allow in any audio on their integrated Bluetooth system.