Unable to connect my Satellite A200 - 1 MB to new router WLAN

Hi all

I recently bought the LinkSys Router (model No.: WRT120N) and configured it. But it does not connect to my TOSHIBA laptop (model No.: Satellite A200 - 1 MB) with this new router.
This is a wireless connection. I don't think its something to do with the router because other laptops can access the signal and they can connect to this router.

Can someone please help me to solve this?

Thank you best regards &,.
Razzaq.

Hello

First, check if your WiFi is turned on!
The wireless network card must be enabled using FN + F8 and the WLan switch located on the side of the laptop.
Then you check the points listed by Al - ex.

How about WLan driver update? Do it if a newer version is available!

Tags: Toshiba

Similar Questions

  • Unable to connect by Satellite C70 - A - 16 L to my WLAN

    I bought a Satellite C70 - A - 16 L today, when I tried to set up a wifi connection using my known password I got the message "cannot connect to this network.

    I'm not a techie whizz, far from it and I wonder if I am missing something that may be obvious. The laptop detects my network OK.

    I will be grateful to anyone who can help you with this.

    Thank you.

    If your laptop can detect your WLAN means WLAN is successfully activated. Please make sure that you use the correct password and make sure you have it points right.

    What you can try is to remove the WIFI password for several minutes just check the WLAN connectivity.

    Using LAN, everything must be OK, right?

  • How to connect my Satellite A200 with LCS Philips TV?

    Hi, I have problems to connect my Satellite A200 1E1 with a PF9967D 32 Philips TV LCD HD ready.
    Manuals recommend an HDMI extension that is unfortunately not available with my laptop.

    However, is possible to use an S-Video connection instead? I could accept a lower quality. When I connect the laptop with the TV, I feel that the Satellite doesn't send out any signal. The combination "FN + F5" does not have the ability to switch between screens. Once, I connected a projector and had no problem at all with switching between the video-projector, computer screen or both.

    Any comments would be much appreciated, thank you in advance.

    Hello

    In the user manuals, it is written in almost each of the chapters on ports or machines slot a short comment: depending on the configuration. This means that this s manuals can be used for different laptop A200 models.

    Each laptop comes with optical disc drive HD-DVD also has an HDMI port. According to the specifications of the laptop, your laptop has no ODD of HD - DVD, and because of this, there is also no HDMI port.

    There sonly a S-video to TV-out port. Using this port you can send the video signal to your TV. I have too many LCD TV and I have used it several times with my laptop A200. It's very simple, but make sure you use the right channel (S-Video) on your TV. Using the FN + F5 key combination, you can switch to the TV.

    If this does not work you are doing something wrong.

  • Is it perhaps connect my Satellite A200-10W for TV

    I could connect my satellite A200-10W to TV?
    If so, should what device I buy?

    Yes you can, simply buy a S-video (http://www.laptopaccessoriesinc.com/images/5FT_4_PIN_S-VIDEO_to_3_RCA_TV_male_Cable.jpg) cable you connect and you also need an Audio cable that can give an audio output to the TV (http://www.germes-online.com/direct/dbimage/50103844/Audio_Video_Cable.jpg)

  • Cannot connect my Satellite A200 with my Headset HBH-PV708

    I have laptop Toshiba Satellite A200 with Win Vista Home Premium.

    My Blootooth recognizes and connects everything right from my mobile phone NOKIA, but NOT NOT connect my Sony Ericsson Bluetooth Headset HBH-PV708.
    Could someone help me please to solve this problem?
    I would like to use the headset with my SKYPE.

    Thank you.

    I wonder if you can connect if you enable 'link level apply secuirty... '. "in the Bluetooth Options > Security > custom level

  • Satellite A200-1N2: I should udpate Intel Wlan driver through update of Vista?

    Hello

    I have two questions pls...

    1. I have a laptop Toshiba Satellite A200-1N2 core 2 Duo

    There is a * (optional) * updated by Windows Vista to...
    * Update driver Intel (R) PRO/Wireless 3945ABG Network connection *.

    I would like to know if it's a good idea to go for the update of this window gave or not?

    2. I've heard that it has deepened the Start button > all programs > Toshiba > a place where I can go and it could me check for all needed updates for the drivers of Toshiba and all necessary updates...

    Pls any idea where to do it?

    Thank you

    Hello

    This update seems to be linked to the Intel WLan driver.
    I think it s not necessary to update the Intel WLan driver through update of Windows Vista.
    If you want to update the WLan driver then visit the page of the Toshiba Wlan driver or the Intel page.

    With regard to the second question.
    You can visit the European driver Toshiba page and there you can check what newer drivers have been released.

    There is also a tool called Toshiba [Tempro | http://eu.computers.toshiba-europe.com/innovation/generic/TEMPO_RELEASE/] that keep you abreast of software updates and the latest Toshiba driver as soon as they are released

  • Satellite A200 (PSAE6E) - Impossible to recognize the WLAN driver

    Hello

    I have a Satellite A200 PSAE6E with Vista.
    I want to just install WXp and erase Vista.

    When installing Xp, everything is Ok, except that my computer does not recognize my wireless card...
    Still, after the boot sequence, windows desktop appeared and a message: new hardware found...
    When I decide to do an automatic search and install... nothing.
    When I look in the control panel > Device Manager
    In the "Other devices" section appears: with a yellow network controller!
    And can't find a good driver...
    In properties, detail sheet, it is written:
    PCI\VEN_8086 & DEV_4229 & SUBSYS_00008086 & REV_57\...

    I have download all the drivers from toshiba (for XP) Download Center and I also try to download Intel drivers... NOTHING...

    Please if someone can help me...
    François

    You have installed Windows XP SP2 home edition?

  • Unable to connect to the URL of planning after new installation & configuration 11.1.2

    I installed 11.1.2 on Windows 64 bit environment and configured.

    This is my environment:
    Box 1. FS, Essbase, Weblogic, Oracle HTTP. Successfully set up and works great no problem (I don't not configured web server in FS yet)
    Box 2. Planning. Installation and configuration was successful.

    Question: but unable to connect to the URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I'm not expecting 19000 will connect)

    Trobleshooting:
    When executing netstat, 8300 does not run on this box.
    Also configured to 'Manage the clusters of planning' with no luck.
    The WebLogic (11g) server indicated State planning is unknown.
    Diagnosis indicates: 1. There is no 2 System-jazn-"Data.xml" file. Web application for planning has no reason of error: java.net.ConnectException: Connection refused: connect
    I stopped and restarted service app planning several passages of time without any problem but unable to connect to the URL and no port is running.
    Journal of planning does not reveal the error messages.
    EMP system log shows ServletContainerAdapter manager not initialized successfully
    There is no error in start-HyS9Planning - out .log.
    Start-HyS9Planning - error.log shows the requested service has already been started.

    There is an error in the validation log:

    [2010-10 - 06T 10: 18:23.171 - 04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle. EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU ^ MG1Cf8KW00000E, 0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] verification code error response: []
    java.lang.Exception: java.net.ConnectException: connection refused: connect
    at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
    at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
    at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
    at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
    at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
    at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
    to org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
    to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
    at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
    at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
    to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
    to org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
    at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
    at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
    at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
    to com.hyperion.cis.validation.RunningEnviroment.access$ 000 (RunningEnviroment.java:40)
    to com.hyperion.cis.validation.RunningEnviroment$ 1.run(RunningEnviroment.java:132)
    Caused by: java.net.ConnectException: connection refused: connect
    at java.net.PlainSocketImpl.socketConnect (Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
    at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
    at java.net.Socket.connect(Socket.java:519)
    at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
    at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
    at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
    to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
    at sun.net.www.http.HttpClient.New (HttpClient.java:306)
    at sun.net.www.http.HttpClient.New (HttpClient.java:323)
    at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:852)
    at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:793)
    at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:718)
    at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
    ... 21 more

    ]]


    What am I not doing?

    Thanks for your help in advance!

    Published by: VenuRamini on October 6, 2010 07:25

    Published by: VenuRamini on October 6, 2010 07:35

    Make sure that the Weblogic password is correct in the boot.properties and restart the services.

    Boot.properties files would be present in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\\security\boot.properties

    For example,.

    For APS:
    D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\AnalyticProviderServices1\security\boot. Properties

    For Regional service:
    D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices1\security\boot. Properties

    HTH-
    Jasmine.

  • Cannot connect by Satellite A200 - 1 X 1 to two hubs of WLan

    Hello

    having a problem with the connection to a new laptop A200 - 1 X 1 with the wireless card Atheros for 2 different wireless home hub.
    I'm assuming that its todo with the Atheros card not taken support WPA / WPA2 a, b, or g mode.

    Can someone confirm please.
    If so, it will connect using WPA mode with draft 11n wireless hubs?
    If this is the case, install the 3945ABG card Intel would work in this phone?

    If so, how easy is it to spend?
    The laptop is used by my mother who lives away from me for more than 3 hours.

    I can get the card for about £15 Inc., but I want to know if he's going to cure the problem.

    See you soon
    Nick

    I have Satellite P200D with Atheros AR5007EG Wireless Network adapt and use at home. WLAN is encrypted using WPA and for the speed of data transfer, I use standard g.

  • Very unstable WIFI connection on Satellite A200 PSAE4E

    Just had my Equium A100 replaced with a satellite pro A200 and for some reason that I am fighting to get it connected to my wireless network. I had the old laptop connected properly and used channel 11 on my WAP.

    Now, after trying to connect my new laptop I find the connection very unstable. I tried different channel numbers, and these worked mainly the lower numbers, but are proved to be slow and unreliable. I have other laptops that are very well using my WAP to channel 11.

    Anyone who has experienced this trouble and what is the solution.

    WAP Netgear wg602. No firmware update available

    See #.

    Macca

    Hello

    Just a question: do you use pre-installed Vista or maybe WXP on your new laptop computer?

  • Unable to connect by Satellite 1410 604 to WLAN when enabled WEP in

    Hello!

    Well, all I was looking for this forum, but I was not able to find what is happening with this computer.

    News of the laptop:

    Toshiba Satellite
    Model: 1410-604
    Installed wireless network adapter:
    Toshiba Wireless LAN Mini PCI Card
    Texas Instruments PCI-1410 CardBus Controladora

    From what I could find so far (the laptop is not mine, I'm helping a friend to get solved this problem) this card supports the standard 802.11/b. This should not be a problem, because the A / P supports 802. 11b standard.

    Anyway, there is absolutely no way to get the laptop connected to the WLAN...

    Or, to be more correct: it does not connect to the WLAN when WEP encryption is enabled (WEP or WPA give the same thing: it seems to get connected, but never address IP of DHCP), but this drug is going very well, if I turn off the WEP encryption.

    The worst is that the installed drivers don't support almost any configuration. Advanced configuration supports the following:

    1. the station name
    2 channel
    3 speed transmission
    4. power management card

    In addition, the card doesn't have any network manager (as others have, where it is possible to adjust some settings and ensure that WEP is used properly).

    I don't know what is happening here. I wasn't able to get the card working in Windows XP and or in LINUX (knoppix, ubuntu and xubuntu I tried).

    I'm starting to think that this has to do with the card and it is the inability to work under encriptación WEP or WAP (it works OK in open WLANs), and I do not see how to solve this problem.

    It seems that there are no newer drivers than what I (downloaded at Toshiba),
    I don't know if an update of the BIOS, will probably not solve.

    The card is maybe just too old... but if I'm not wrong... It should work. Shouldn't it?

    All ideas are absolutely our guests!

    Best regards

    Fenix_D

    Hello

    It seems that this map was made by Agere (it comes to WLan driver appearing on the Toshiba page).
    The INF file provides a few details and the driver appear to come from v7.42.0.300 19/12/2001

    However, the encryption WEP or WAP is features material and if the equipment (WLan card) does not support this then an update of the driver would not help you!

    But what you might check is the option in the Device Manager-> card Wlan-> properties-> Advanced tab
    Usually, there is all necessary settings and if the encryption would be supported then you should find it there.

    If this doesn't help then I advise you to buy a USB WLan stick who favour more recent ciphers

  • Unable to connect by Satellite A100 for TV using a cable SCART

    Hello
    Please help me! I'm trying to connect my laptop Toshiba Satellite A 100; Video card from NVIDIA 7600 with my LCD TV Panasonic Viera.
    When I connect it with the cable SCART there is no signal on the TV.

    Maybe my video drivers are not real, but when I download again on the Internet it displays the error message?

    Before that, I was with the old CRT TV-Goldstar I there is no problems.
    Now, I can't change my resolution he remains on 800 x 600 for the second screen and does not find it.

    I hope someone will give me useful advice!

    First check the TV settings in the properties of the nVidia graphics card!
    I put t remember where you go exactly and what settings are important, but you should definitely check out everything in the graphic properties-> advanced.

    In addition, the user manual describes exactly how to connect a TV to the laptop.
    To my knowledge, you must use an s-video cable.

  • Unable to connect by Satellite Z30 - A - 1 8 external projector

    Hello

    I have problems to connect to this laptop to an external projector.

    When I connect the cable, it recognize the projector and screen is displayed, but after 15-30 seconds, the screen goes black and computer keeps trying to connect again to projector and problem keeps when its connected.

    The connection to the projector is made hollow VGA cable with about 10 meters, I have tested on several other projectors with other cables and the problem persists.

    The computer is new and I have installed the latest drivers. What can I do to fix this?

    Thank you.

    Have you tried to use a shorter cable?
    Not very well but it might be possible that the problem appears due to the cable (10 m).
    That would you say, using a HDMI cable? Have you tested it?

    On the other hand I also recommend a graphics card driver.

    By the way: to switch between the internal and external monitor, you must use the Fn + F5 key combination.
    Note: If you use the simultaneous mode, you must set the internal display resolution to match the resolution of the external display.

  • Re: Unable to connect by Satellite C660 for TV

    Hello

    Please be gentle, I'm new here!

    I bought a new HDMI cable to connect my laptop to the TV, but nothing happens.
    The processor usage is Intel64 family 6 model 23.
    Ehwn I click on the parameters of the monitor/TV, that is to say that the ' TV/monitor settings are not supported.

    Any help/suggestions to rectify much apprciated
    Roger

    Hello

    First, you must connect both devices (TV and laptop) using a suitable cable, which is supported by the TV and laptop.
    You can then turn on the TV and the laptop and activate the HDMI on the TV channel.
    Now, use the FN + F5 key combination to switch the video TV output.

    It work?

  • WLAN is unable to allow my Satellite A200

    Hi people!

    I have an A200 (PSAE6E) running under Windows Vista 32. Intel wifi link 4965AGN wireless card. vs 12.2.0.11.

    I can't have a wireless card works at all.
    Hardware button is enabled; Software control F8 is enabled;
    ConfigFree and Task Manager 'said' it's all ok.
    But the center of windows network just can't turn it on.
    Windows Network Diagnostics (what is the right way to write it?) can not solve the problem.
    I'm just nuts with it.

    Any ideas?
    Thanks in any case.

    I don't know what the problem is here, but the fact is that the wireless network card must be turned on if:
    WLAN switch is activated and the WLAN light should be as WE
    FN + F8 using the WLAN card must be assigned to too

    So, if you think that two parameters are passed to start Toshiba Assist > ConfigFree > WLAN and run RADAR to see if your WIFI at home will be detected correctly.

    Please post the result.

Maybe you are looking for