Unable to connect TC after modem swap, although wifi works very well.

Similar Questions

• WiFi worked very well. Tried to connect the second device. "Wi - Fi auto-assignée 169.254.49.8 IP address and won't be able to connect... »

  One of our MacBook has been connected to the internet through our router base station Airport Express wireless and wifi worked very well. All of a sudden, the other MacBook could not connect. After a few days of no connection on one while the other worked, we rebooted the modem. Now neither laptop connects. We called our ISP and they verified that all is well with our internet service or the modem. Internet works fine with the cable plugged directly on each machine. Under network in system preferences, I get this message: "Wi - Fi 169.254.49.8 auto assigned IP address and won't be able to connect to the internet." When I run the diagnostic, I get a message saying that my network configuration has changed, but it has not changed anything. We have never gone and nothing changed since we first set up the modem and the AEBS. Any ideas on how to solve this problem?

  Yes, the express can do that... Suddenly lose the configuration and return to the bridge for example even when connected to a modem to bridge.

  The solution is simple... Press reset and redo the Express installation.

  NOTE... an Express is not expected that the main router... It's light to etc. of airprint, airplay wireless bridge. Don't wait to have no problems when you use the Express to do the work of the extreme or TC or another router should do.

• recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  Hi mikedav,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

  Method 1:

  Follow the instructions in the link below which will help you solve the problem.

  Tips for solving problems with Internet Explorer

  http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

  Method 2:

  Follow the instructions in the link below to optimize Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Unable to access hot mail. can connect but not see e-mail. Works very well with Exployer.

  It is one their recent. Worked well 4 days ago. for the last 3 days that I can go to Windows live (my e-mail account), I can connect, but that's all. When I click on my email, or any tab, tab nothing happens. I can go online with Windows Exployer and it works fine.

  Adblock Plus blocks may be too

  Update your subscriptions in 'Adblock Plus '.

  See "What to do when Adblock Plus blocks too" breast of the following:

  • https://support.Mozilla.com/en-us/questions/893525

• Cant connect my 5 c for pc but works very well with my 5

  Hello

  Maybe it's an old question, but I can not find my solution after trying a lot of suggestions on this forum. I have iphone 5 c (ios 9.2) and 5 (ios 8.1), I can not connect my 5 c with my pc (windows 7 64), it says device not recognized and listed as unknown device in Device Manager. But when I connect my iphone 5s the same pc with same cable it works fine, I can import as mobile devices or itunes.

  I tried to uninstall itunes installation, restart my pc and my iphone, reinstall or update the drivers, use another cable litghning, but still have the same problem.

  is there another way I can try?

  Thanks in advance

  What version of iTunes you have installed on the computer? The version number present, not only "later". Also, when you have removed and reinstalled iTunes, did you do that according to the instructions in the document of support for Apple? Remove and reinstall iTunes and the components of the software for Windows 7 and later versions - Apple Support

• Very slow internet connection on Win 7 on SSD, but works very well with the OS on the HARD disk and the mode safe on SSD

  Original title: network very slow connection on the current installation of Windows?

  So my situation is that I have two disks (SSD and HDD) who both have a Windows installation.

  Because this SSD is an I got free and is in used condition, I left my copy of Windows 7 intact on my mechanical failure of the SSD drive.

  Now the question is, my internet connection is very, very poor, unless I run in safe mode, or the installation on my mechanical drive.

  I use a wired connection, and our connection at home is limited to 120/10 mbit/s, while I have 5/10 at the most.

  I tried to replace the LAN drivers of my motherboard (MSI FM2-A85XA-G43) using both the driver disc that was bundled with my motherboard, Device Manager and the official site of MSI, I also checked my entire system using Malwarebytes, which detected 7 threats and were abducted, nothing helps.

  I also tried the DNS which did nothing either of hot flashes. Now notice what computer of my brother is also connected and works well.

  Now as I type this, I discovered that my speed has suddenly got stable again out of the blue, but I'm skeptical it will remain, so I still want to ask what is / was going on here.

  Thank you for your time.

  Sorry for the late response here, I've been very busy with the developments in the last days and completely focused on it.

  More than a week has passed since the problem disappeared as if by magic, and so far I don't see the signs of what is going on again.

  I think that the problem has passed away now, but if it arises again I will probably update this.

  Thanks for all the suggestions and your time in this issue.

• X 51 headset does not work after nearly three years of work very well

  I got my X 51 since August 2014 with no problems. Since a few days ago, the microphone on my headset (Vibration of genius) has stopped working. The headphones work fine.

  I tried the front of rear catch and two different helmets - even. Same headphones on different external co work very well.

  Manage Audio, micro devices has the default value. Nothing is cut according to the levels.

  Downloaded the latest drivers from Realtek, run the installer twice (which uninstalls and reinstalls) - no change.

  When I go to hardware and audio, he has his usual - manage Audio devices, where I did these things. There is also a NVidia control panel with a tab to Set Up Digital Audio, but that just seems to post a link to the Audio devices to manage. Under hardware and sound, there is also an Alienware Audio option (which I don't remember seen before), but still, nothing is cut.

  I tested the microphone on the recording of the acoustic window tab, but no green lines rise when I talk. I also tried a video game, with in-game talk (Mechwarrior Online), no luck there. I also tried the call sound test on Skype, no luck there.

  I'm not sure things:

  I have three listed under record on my acoustic window: Microphone, Line In and Stereo Mix - the other two are disabled...?

  I read something that suggested to uninstall the driver manually and reinstall, but I know not where to do. For example, according to uninstall programs, I see an Nvidia HD Audio Driver 1.3.34.3 which was installed a couple of days - very probably the same day that my microphone no longer works. There is actually a half dozen NVidia components installed so far-should I just uninstall all?

  I read a suggestion on these forums about ePSA running, so I did - and not that fast - and he said no problems.

  I tried the system restore to two days ago, has not always worked. (I'm trying to overthrow that now)

  Only options I can think are either use AlienRespawn to reset to the factory settings, and if it does not, in my view, that I still have the Alienware W7 install disc - could start all over again.

  Any other suggestions before I resort to that?

  cosmic55

  1. There were two jacks for headphones and microphone - which is analog?

  2. I plugged a microphone to the USB - a literal hand micro - and it worked!

  3 do suggest that material analog microphone is broken?

  4. maybe a USB headset work until I get fixed t?

  1 Yes
  2. right kind USB still works. Microphones and USB based headsets do not use the analog sound card hardware at all. They use the circuits of USB and USB-Audio corresponding to the device drivers.
  3. Yes.
  4. Yes. Apart from the replacement of the motherboard, it would be the solution. They make nice Helmets on USB gaming these days here.

• I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  network cable unplugged wiundows xp

  I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  Hello Verashanley

  Since how long did begin?
  You have added a new software or hardware to the system?
  If the issue took place recently then you can try the system restore.
  How to perform system restore in Windows XP.
  If you have recently added anything to the system (hardware or software), then remove.
  If the system restore does not then check in Device Manager and verify that the network card is considered and no errors appear.
  To open Device Manager, click Start, and then click Control Panel. Click performance and Maintenanceand then click System. In the hardware tab, click Device Manager.
  Check the type of network card you have and that you try to update the drivers from the hardware manufactures Web site.
  Also, check the connection for the network adapter. Do you see any physical damage. When you plug the NIC saw all the lights on the network card lights up? If not, then you can deal with a hardware problem and need to contact the manufacture of the system and see about obtaining the card replaced.
  Let me know the results. Thank you.

• Unable to connect with the modem router e2500

  I have an old Speedstream 5100 modem hooked to my router e2500. Everything works well except if for any reason any my modem disconnects from the ISP I can not log in via the route to reconnect it. I need to connect a cable modem to computer direct run connect script then modem plug in router all is well again.

  Any ideas why the connection to the modem router is blocked?

  Thnaks,

  Al

  al_mathews wrote:

  My Speedstream has only an Ethernet connection so I did not know that he resembled a router for the local network. I changed the mode of bridge on the PPoE configuration on e2500 / Speedstream and reconnected to the ISP on the e2500 configuration screen. Who can solve the problem of reconnecting from now, it is run on the e2500.

  One thing I see now is since I left the modem IP set to 192.168.0.X can't do it all through the e2500. Is it because my DHCP in e2500 is configured with 192.168.1.X range IP modem is not covered in my network? If I directly connect Speedstream and place you IP 192.168.1.X will become visible on LAN?

  You are unable to access the modem even if you have a PPPoE connection. For PPPoE the E2500 will not need an IP address from the modem so it does not have DHCP on WAN port and so we never see. When you try to access the address of 192.168.0. * the E2500 it will route through the tunnel PPP to the ISP.

  If you connect your computer directly to the SpeedStream it should automatically get a DHCP address (assuming that the computer is still ongoing on the DHCP protocol and not with a static IP address and the SpeedStream does not automatically neutralize the DHCP server in Bridge mode). If you have configured a static IP address on the computer, you must change the IP address to an address of 192.168.0. *.

• Unable to connect even after the user password reset

  Hai all,
  
  10.2.0.3 on Linux
  
  Reset a user password and the user is unable to connect as you can see below
  
  
  [oracle@testdb 10.2.0] $ sqlplus sys/Manager as sysdba
  
  SQL * more: release 10.2.0.3.0 - Production on Tue Nov 27 16:20:21 2012
  
  Copyright (c) 1982, 2006, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production
  With partitioning, OLAP and Data Mining options
  
  SQL > alter user sysman identified by oracle.
  
  Modified user.
  
  SQL > disconnected from Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - Production
  With partitioning, OLAP and Data Mining options
  
  [oracle@testdb 10.2.0] $ sqlplus sysman/oracle
  
  SQL * more: release 10.2.0.3.0 - Production on Tue Nov 27 16:20:32 2012
  
  Copyright (c) 1982, 2006, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  
  Unable to connect even after the user password reset

  Check
  How to change the password of the database user Sysman (DB control repository schema) [ID 259379.1]
  EMCA 11 g fails with the error "ORA-01017: name of user and password invalid; connection refused"and" username/password invalid name; For DBSNMP or user SYSMAN"[ID 741530.1]

• Unable to connect to websites using safari, although my wife use the imac, which has a separate login id can?

  When I open Safari from the dock it shows as usual, but when I try to connect to it looking for Web sites, it does not. can't display preferences etc either. Also, my wife uses the Imac and has a separate login ID and its works very well for her. Worked ok until the end of the week. Any ideas how to fix? Have tried to install the latest version of Mac OS X, but nothing helps.

  What version of Mac OS X is installed, your profile shows 10.7 but I suspect that it is not correct.

• Version 20.01 is "Unable to connect" while the previous Version 19.02 works great!

  My work computer which runs Windows XP Pro with Service pack 3 and beyond has been upgrade FF worm. 20.01 this afternoon and is "unable to connect". It worked very well on the version previous minutes before it has been updated! Nothing has changed in my network connections and my firewall settings! I'm writing this on a Windows 7 computer that is currently running FF worm. 20.02 that works well! I have another Windows XP Pro computer that is currently running FF Ver, 19.02 and there is a "Software Update" window on the screen asking me to update this computer to 20.01 worm. FF. I clicked on "Ask later" in fear that it will have the same problem "unable to connect"! Help!

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified. I wait a few minutes until what he says at last he is identified & seems to work very well.

  Original title: Internet wireless connection

  I use a PC & a cable modem wireless to connect to the Internet.  When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified.  I wait a few minutes until what he says at last he is identified & seems to work very well.  The only other issue I see is once in a while after it is connected, I noticed that it is to identify the network connection, but I see no problem to surf the web.  This could be a looming problem with the modem, or is it something else?  Should I consider it as my modem is still under warranty?  ARRIS / Motorola wants to charge a diagnostic fee is why I write on this forum first.

  Thank you

  [Transferred from Internet Explorer]

  Roll up your sleeves & cross your fingers...

  ACTIONS:

  [You can print these instructions for reference offline. DON'T SKIP ANY STEP! [If a step said to restart, restart!]

  1. click right on the link following, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1. right click on the following link, select SAVE TARGET as... & download the McAfee consumer products removal tool, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step # 1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file that you saved in step # 1 b above and select run as administrator to run the McAfee utility. DO TAP not your keyboard until the race ends, then reboot again.

  4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9, too.

  4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop namedie8-rereg.

  4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  6. reset Internet Explorer according to the instructions on this page: http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings

  Note => for best results, check the option Remove personal settings .

  7. open Internet Explorer (only!) to http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff [ignore the title & symptoms].

  8 b. ignorant of the "not recommended" or similar warnings, run the difficulty (50202 #) DEFAULT modes and AGGRESSIVE. [3]

  9 restart once again & test.

  10. in response to this post with a status report.

  ==================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm one of your other default browsers.

  [3] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• error of connection but my wi - fi works very well

  Everything was going well until I just "woke up" my computer to use after a few hours 'asleep' and he wants me to resign in iCloud (Mail).  When I try to do, it gives me "connection error" - but my wi - fi works very well and charge other sites...

  I closed the tab and then reopened; I am sure that the password is right and I entered manually.  Don't know what else to try.

  Technical info:

  Late 2009 iMac 3.06 GHz Intel Core 2 Duo

  With the help of 1.2 to 2.0 TB of HD space

  OS X El Capitan, 10.11.3 running

  Hello mrsdoc83,

  Thank you for using communities of Apple Support.

  I see that you get a connection error when you try to connect to iCloud after that your Mac has been asleep.  I know this may sound like a simple troubleshooting step, but I suggest first that you restart the computer and see if the problem persists.

  Restart

  Do one of the following:

  Choose the Apple menu > restart.

  Hold the power button until you see the restart, sleep, or close the dialog box, then click on restart, or press R.

  If the pointer is frozen on the screen or your Mac becomes unresponsive, press command (⌘) - power button to force a restart.

  Important: If you force a reboot, you may lose the unsaved changes in open documents.

  If you don't want the application windows you have currently open to reopen when you restart your Mac and open a session, deactivate the option "reopen the windows when you log in.

  OS X Yosemite: log off, sleep, restart and shut down

  Take care.