Unable to connect to a WLAN secure with router Satellite M30 and BT Voyager 2000

Similar Questions

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• Error: Unable to connect to the database.  Please check the databases and verify the database is accessible.

  Hello.

  Hello

  Do you have any idea of this error, I went through a few forums, but I still got the same message.

  FDM is my server on computer A

  and my Foundation + shared on machine B

  
  

  Error: Unable to connect to the database.  Please check the databases and verify the database is accessible.

  Hello

  Browse the following post

  Failed to create the application of FDM

  (mark this message as useful or appropriate if that helps!)

  concerning

  -DM

• Satellite Pro M70: Unable to connect to the WLan with ConfigFree

  Salvation in the Forum.

  I have problems with a satellite Pro M70, about gaining control of wireless connections.

  When I scan with "The Radar" I have ConfigFree for available wireless accesspoints, I get several points available, but it is not able to connect to one of them. I can read their status and see their marker of WEP encryption.

  When I try to connect to one of them, I get a pop-up dialog, that said (translated from Danish) 'suppliers another software is in control of the wireless network card. When you try to configure a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  Is the unnamed "other provider" associated Windows or perhaps associated McAfee (Security Suite 2007)?

  If you are familiar with this problem or something like that I'd be please to know.

  Also - where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers?

  > Trying to make a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  It should not be a ConfigFree. According to you, an Intel ProSet utility or a Client Atheros wireless network adapter might be controls the Wlan configuration!

  Please check if one of the two control the WiFi network tools and turn off!

  > where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers

  You should have three different tabs in the utility Configfree.
  The second device settings provides the list of devices, and you should see the wireless network connection.
  Choose and use the button network connections.
  There you should find some encryption settings!

  Also check the profile settings tab and the option called security settings

• Tecra 9100 - unable to connect to the WLan access point

  Hello

  I have a Tecra T9100 with miniPCI WLan. I reinstalled XP Pro and all the drivers (downloaded from the Toshiba site) and I've always had a problem with Wifi:

  I can see all access point (in the windows control panel), but when I click on connect, I received a message that the access point is no more...
  He didn't ask me for the security settings?

  does anyone have an idea?

  Much thanks

  Leclere

  Hello

  To my knowledge the Tecra 9100 was equipped with the wireless LAN standard: 802. 11B mini card PCI ORiNOCO.

  You need to check if the WiFi signal is strong enough for a transmission correctly
  I think that the signal of WLan access points is not strong enough because of the distance.

• Satellite A500 - 03P: unable to connect to the WLan using Win 7 + event message

  Hi all

  I recently bought the Satellite A500 with the offer included Windows7 while he was available late October 09.

  So I had the Toshibe DVD for the upgrade and followed the steps and Visa home premium upgrade to Windows 7. Now I have two questions.

  (1) I get a system event Notification after start, talk to me about the system event log. The full message is below.

  Unable to connect to a windows service
  Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service failed

  (2) I was able to use this laptop for the internet before the upgrade, both via a USB wireless drive as well to the office via a DSL modem.
  Now I can't access the internet after the upgarde of Windows 7!

  For example the Optus dial-up box pop up appears commandeLorsque I click on 'connect', it does not connect.

  Can anyone help please?

  Thank you
  C I

  Hey Buddy,

  (1) did you check the Configuration of the Service for this service? The Boot System Event Notification Service type must always be set to automatic. This service is absolutely necessary for Windows and shouldn't t be disabled or set to manual startup type.
  Check it!

  (2) to be honest I never heard on the internet BEFORE, but normally, it should also be possible to access the Internet with Windows 7.
  Make sure that the WLAN or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get on the page of Toshiba.

• Compaq presario c700-c795tu: unable to connect to the WiFi network with WPA2 encryption

  Hi team,

  I tried all the options in your post and I am still unable to connect to WiFi with WPA2-PSK encryption.

  I am currently using the adapter network driver atheros 5007 wireless.

  Some of the links in your message that resolved this issue earlier are currently unavailable.

  It would be great if you could help me to solve this issue.

  Concerning

  Roger

  Here is the patch for WPA2 for XP SP2...

  Install and reboot and then see if you're OK...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1974

  That's the only reason why I can think that now prevents you from being able to connect on a network with WPA2 Personal Security.

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• Unable to connect to a wireless network with Windows 7 computer laptop.

  After resetting my router netgear wireless home network, I have not been able to access my own network with my laptop. I already had access to the internet with a wireless ethernet cable and ankles bound to the router. After reset the netgear router, I was able to access the internet from two other laptops XP and an Acer mini wireless with no problems at all. But my new laptop Toshiba with Windows 7 could not connect, even if he could detect the network. I tried all day even resort to the ethernet socket and wireless cable, but even that would no longer work. I was able to connect using this same cable attached.

  Hello

  Seems that the Wireless does not work on the Dell.

  This is the process to try to find what wrong with it.

  ------------------

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Equium A200: Unable to connect to the Wlan - no IP address of the router

  Dear readers

  I have a laptop Equium A200 Toshiba.
  I TI a year, a little more of it and it did work under Vista perfectly, no problem.

  First of a sudded 4 weeks ago my wife told me that she can no longer connect to the internet.
  I thought that it was something less serious, until I couldn't solve the problem.

  The laptop is not receiving an IP address wireless or cable modem.
  I type cmd and I get an IP starting with 169 in wireless and wireed cases.
  I also tried to reset the NETWORK card, but it does not work.

  It's frustrating seriously because we don't change anything on the other machine, then let updates automatically, this is obviously some update that triggered connect to stop the local distribution of load and internet access now it shows only local access.

  Appreciate any help out there on root causes.
  So far not much dad worked. R/Paulcou

  Hello

  In your case, I would first check the settings of the router.
  I put t know what settings of your router is compatible, but you should go thought the simple options (such as when the first router configuration) and should check if everything is set correctly.

  In addition, you should check the settings of WLan connection. In the properties of WLan connection, you would find the TCP/IP protocol. Check the properties of the TCP/IP Protocol and set all parameters (IP address, getaway, etc.) to get automatically.

  If all of these settings are set correctly, then start the console (CMD) and use the command:
  ipconfig / renew

  This should refresh the IP address and in most cases, it helps.

  Last but not least, you should check if you can update the WLan driver!

• Satellite L505-144: unable to connect to the Wlan 802.11 N

  Hello, I hope someone can help me with this

  I've updated my old network wireless at home so I can stream media.
  I replaced my old netgear G router and bought a netgear DGND3300 dual band N router to the hub and a WNDA3100.

  Office everything is set up ok on these as I can connect up to 300 kbps, which is good.
  The current settings for the router are:
  Up to 130Mbps at 5 GHz & 54Mbps 2.4 GHz"
  channel 36 = N
  Channel 11 = G

  Although the problem is the laptop.
  Now, he says that the wireless laptop is N. When I connect to the router it connects only when G setting and I only have until 45 Kbps.

  Is there a way so that it can connect to BOTH channels to get the full speed or the wireless laptop is only a single tape device?

  Thank you
  Steve

  Hello

  Built into the laptop LAN card is a Realtek RTL8191SE 802.11bgn.
  As you can see the wireless network card supports three WLan standards; 802 11 B, G and N.

  First of all, you must make sure that more recent Wlan driver is installed;
  New WLan driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, you should check if 802.11 N standard has been chosen.
  You should do this in the Device Manager-> card WLan-> properties-> Advanced tab.

  Welcome them

• Qosmio X 300-13 G - unable to connect to the WLan router using Project N

  Hello
  I purchased a Qosmio X 300-13 g (the only one available in Portugal :/) and I tried to connect it to a network wirelles N, but I always get an error message):
  Windows could not connect because the defenitions of the router are different from your...

  Well you know why? I tried with several routers, and it is always the same...

  TKS

  Concerning

  Is your WLan router supports 802.11 N draft standard?

  Did you choose N draft standard on your WLan router?

• Satellite M30-604: unable to connect to the WLan

  Hi all

  I have some problems with my toshiba SM30-604

  First of all, I find the product in the section support somehow, even I can't find it by giving the serial number! ???
  Even with the program auto-detection!

  The other big problem is with the wireless card.
  Since the first time I bought the laptop when I tried to connect with some internet wirless networks I had problems with certain types of escryption of these networks.

  If the network is an escryption
  WPA,
  WPA 2,.
  WPA - PSK
  WPA2-PSK
  I can not connect to this network and he brings a message, something like "the network may not be available at this time" Although it is.

  Even if has a WEP encryption and password isn't a 10-digit is brings a message like "the neck should be 40 bits or 104 bits and 5 or 13 ASCII characters and 10 or 26 hexadecimal characters.

  The last days I can not connect to any wireless network for the above reasons.
  I know that its an old pc, but it is very good even for today an I still use it even I have other laptops

  Please can someone help me?
  Will there be some updates for my card toshiba wireless?
  I downloaded the automatic detection tool, but it does not recognize my pc model

  Under my pc has this data:

  SM30-604
  model No. PSM30E-0SY2K-GK

  the wireless card must be the:
  Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter

  I'm desperate this problem.

  Nick

  Post edited by: niksta

  > First of all, I find the product in the section support somehow, even I can't find it by giving the serial number! ???

  The portable M30-604 PSM30E-0SY2K-GK is an old classic. Right?
  Well, Toshiba driver European page you will find three categories: Archive, book and Options.
  If you don't find this portable model of laptop in the computer category then I would say that the next step should be archiving. Right? To me, it seems plausible to check the area archives due to the age of the laptop.

  In addition, the books are sorted by serial number; means that you won't find satellite M30 604 but Satellite M30 PSM30E.

  To my knowledge the Intel (r) PRO/Wireless LAN 2100 supports only 802.11 B Wlan standard and only the key WEP, WPA, encryption (AES +).
  FTP://download.Intel.com/support/wireless/WLAN/SB/intelprowireless2100mpci_prodbrief.PDF

  This means that if the WiFi network is not set to 802.11 B and if the WiFi network has been set to WPA2 encryption, so you won't be able to connect to this network.

• Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website

  LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi

  Using IMAC OS 10.8.2 with all updates

  Netgear DGN2200v3 router using

  Printer not connect to the HP ePrint website

  Printer connects using Hp and profile for fax set up etc.  But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh.

  "If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection

  ANY IDEAS - HAVE I MISSED SOMETHING?

  Thank you very much

  I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.

  The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.

  Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page.  Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.

  You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.

  Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.