Unable to connect to ANY internet browser after update Firefox? fake

Similar Questions

• Unable to connect to any internet - based programs except windows mail still receives. Windows 8 operating system

  I the origin of this tag on the application of someone else, but thought that might get missed then asked a new question of my own

  I'm having this problem too.  It occurred spontaneously two nights ago. Until now, I had no problem with the connection, now although I can see the internet connection (wireless), it's a signal strong and windows mail will always receive emails, I can't access ALL the web connections.  Can't get windows updates, cannot use any browser (chrome or ie), cannot connect to itunes store.  Sometimes if I reboot I get a shot at a link to a web page and then nothing.  I spent hours on this point - have used norton removal tool to remove the remains of any preinstalled software norton, no proxy box is checked, took

  and protocols tcp readded, tried to change the DNS settings, removed and restarted winsock from registry.  Finally last night I started to remove applications - removed from google chrome, deleted itunes and all the components, report of Trusteer deleted (which may have been the only thing to be updated when the problem started and removed my av (panda) software.)  Finally, several reboots later, I thought that I had cracked because I was able to connect to the internet, reinstalled the av software, reinstalled chrome, reinstalled itunes and has managed to make updates, I tried to do in itunes.  BUT, this morning have restarted - when the PC was closing I got a fleeting glimpse off the coast of the webcheckmonitor error message that disappeared before I could do anything and I'm back to square 1 - I.e.I can get windows mail but NOTHING ELSE through browser windows.

  Responses to help advising a link to Web sites or by downloading tools are useless as I have no Internet connection.  And, Yes, I've tried is doing a restore of windows and while I can restore to the most recent time point on 3 July, to return to any another restore point generates an error (0x8007045b) - a Microsoft.windowscommumicationsappsdocx file cannot be extracted.

  Full scans of my PC with my av software found nothing.

  I'm now about to do a full factory reset, but the thought of reinstalling everything makes me want to cry

  There must be a solution - all the forums I've seen are a few years referring to xp or vista, but I use windows 8 (reluctant valuation) after that xp is out of support and really wish I had that sturdy old BONES back!

  Moreover, I am writing from an iPad connected to the wireless router even though I know that my internet connection works.

  Well, my problem seems to solve as spontaneously as it came! So after trying to solve the problem in the region of 15 hours over 3 days, including a lot of time in the queue to speak to my ISP in case there was a problem in broadband, day 4 when I started my PC everything was OK.

  It's a real conundrum!   When I persuade my ISP to do a speedtest on my line, they measured the line speed at 1.5 Mbit/s.  I couldn't even run speedtest form my PC at the time that I received no response.

  I know not so mobile devices and windows mail is lighter to consumers on the Internet than a complete PC based browser and were able to maintain the internet connection if the line speeds were poor. It seems weird that my mobile could happily connect to mail, google search and internet sites so that my PC can 'see' my router but not access the internet.

  Again, thanks for your response.  The only thing I hadn't tried (and ultimately does not need of) has been updated to network adapter - but notice I could not find updates for her in any case I was getting no response for searches on the web at the time and had already tried to look for windows updates , but he could not connect.

• Pavilion 14-ab051tx N4G24PA: unable to connect to any wireless network after the upgrade to Windows 10

  I recently bought a 14-ab-51tx Pavilion N4G24PA, this is my first laptop from HP, it comes with Windows already installed 8.1 and it worked fine.

  The thing is, I kind of get used to using Windows 10 on my previous laptop, so without further hesitation I upgraded to 64-bit Windows 10.

  Here's what I did wrong:

  Instead of update Windows 8.1 for Windows 10, I indeliberately he installed fresh, with couple of mouse clicks, I didn't realize that I also remove the recovery partition.

  I realized only after the installation process is complete, but then it was too late. I look forward to using my laptop with Windows 10 freshly installed inside to make some games just noticed that I couldn't connect to any network without wire, House or public. It recognizes my wifi at home, but the signal bar is bizarre, there is only 1 bar of signal even if the wireless router is only about 10 feet from him, so I checked my other computers and smartphones, but the signal on them is ridiculously high (full bar), it also detects another wireless network that are further away than my wireless router.

  But back to my HP laptop, I tried to connect to my home network despite the signal bar with the right entry security key, but it does not connect, it says "Cannot connect to the network".

  Tried updating drivers with HP Support Assistant and no luck, the problem persists, tried all the solution on the internet, int ip reset, reset winsock, checking and unchecking, always without success.

  Can someone help me please...

  Hello:

  The BOM indicates that your laptop comes with a Broadcom wireless card.

  Have you tried the last W10 driver for this card to support your PC and driver page?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  Exit the: December 17, 2015

  Version 7.35.317.0 Rev.A

  File name: sp74241.exe

• Unable to connect to the Internet automatically after the restart with Linksys WAG 320n

  We have a problem with Linksys WAG 320n router that after rebooting the router it does not connect to the Internet automatically.

  instead I required to connect manually by clicking on State-> Connect.

  As previously he was showing server status DNS IP addresses, now it does not appear after connecting also.

  "" Could you let me know wheather miss me an option to automatically connect with LAN "' after reboot or anything else the cause.

  Thanks in advance.

  Thanks guys...

  After changing some settings wireless - bandwidth to value 'Standard' and MTU change, its done!

  Finally, the problem has been resolved. Now I can connect automatically when I restart the router and display the DNS IP addresses too.

  Thanks once again for most people trying to help me.

  I have another question and I would like to post separately instead of mention here.

• Unable to connect to the internet, can't update firmware

  HP Envy 110a (D411a) printer all in one

  Installed and set up, everything has gone well and works. Tested on Win XP, Vista, Win 7 64, Apple laptop, iPhone 4, all prints wireless or USB. Now for the problem: it works on my home network, but it does not connect to the internet. Some applications only will be running, or the update of the firmware. They all say that I must be connected to the internet to continue. However, I was able to install ePrint and go to the website of eprintcenter.com, add my printer and see the status. He said that everything was good. I had to do this by using the internet, but why my apps does not nor will not update the firmware? Is it possible to download the firmware and install it via USB? I have a computer repair company and have had many problems with HP wireless printers. I don't recommend any HP product to my clients. But I was impressed by the look and quality of envy, and HP felt could repent of their sins and finally build a quality product. The property is everything printing wireless with little effort works. The bad is picky about the internet. Anyone have any ideas?

  GOOD NEWS!

  I apologize to HP. Yes, they repented of their past sins! The 110 is a great printer. I love the size, color and weight (heavy) of the printer. It seems very professional. The style looks more professional than any printer I've seen to date. All executives would like this printer. All the features now work as advertising. How do I solve this problem? I went from a Netgear router gigabit to a D-Link gigabit router. And then reconnected the radio wireless to the new network. Then he just started to work. I know that the Netgear is always a good router, but something deep in the default settings must have caused the HP does not to work.

  I don't work for HP, nor do I own their stock. I highly recommend this printer for serious users.

• Unable to connect to the internet to check updates

  According to Oracle® Fusion Middleware for Oracle WebCenter 11 g Release 1 (11.1.1) Developer Guide, I download the update of jdeveloper. However, jdeveloper will display error:
  Unable to connect to internet to check updates.
  
  If you are behind a firewall or use a proxy to access web pages, check your proxy setting s below and click OK to try again.
  
  Host name: emeacache.uk.oracle.com
  Port number: 80
  Exception: localhost | 192.168.1.16
  
  I don't use a proxy and I close the firewall. I can get the updates before, but not today.
  
  I have an old version of Jdeveloper 11 g. He can get the updates of Oracel, but I can't find the webcenter extension in the list of results.
  
  How would I know if the webcenter extension has been downloaded and installed in Jdeveloper 11 g.
  
  When I opened the file jspx webcenter application, all the graphic components become rectangle.

  You can get the extension here WebCenter:
  http://www.Oracle.com/technology/products/jdev/101/update/fmw_products.XML
  Once install you it, you can register for this the tools-> preferences-> extensions
  You will also have a new application model for WebCenter available.

• Unable to connect to the internet after the removal of important processes in the task bar

  I am not very tech-savvy then let me explain.

  I have a laptop Lenovo I recently bought in August 2014.  A friend suggested that I have download the free application "Open Office" in line, so I could open a school power point.  Open Office gave me a handful of viruses, which I managed to delete, then having served the system well, panic I accidentally opened the Task Manager and deleted a bunch of processes that are running.

  Now, I find that, although I am connected to WiFi, I can't open Internet.  I click on Firefox, but it shows that I am unable to connect to the Internet.

  I have Windows 8; an easy way I can solve this problem?

  Thank you.

  Original title: I accidentally turned off the program that allows my computer to connect to the Internet

  Hi Tunasushiroll,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  The problem can occur for various reasons, including incorrect TCP/IP settings configured, firewalls third of anti-virus programs blocking the connection, or due to bad the advanced sharing settings. So, I would suggest trying the following methods and check if you system is able to detect the wireless network.

  Method 1:

  Run the troubleshooter network first, and then test your Internet connection.

  Open the Network Troubleshooter by hitting on any fly in the Dashboard screen, quilting Search(or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), entering the network troubleshooterin the search box, type, or by clicking settingsand then by typing or clicking on identify and fix network problems.

  If the problem persists, try the following method.

  Method 2:

  Second of all, please check if the WLAN service is started and set to automatic. If it is stopped, then I suggest you to start the service and set it to automatic.

  1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
  2. Select the Autoconfiguration WLAN service in the list and double-click it.
  3. Change the startup to Automatic type, then click Start to start the service.
  4. Click apply and then click OK.
  5. Restart the computer and verify if the network is detected. If this is not the case, go to method 3.

  Method 3:

  Reset the DNS and TCP/IP settings.

  1. Press the Windows key + X, click prompt (Admin).
  2. Please enter the following commands and press ENTER after each one.

     netsh int ip reset resetlog.txt
     netsh winsock reset
     ipconfig/registerdns
     ipconfig/flushdns
     ipconfig/release

  3. Restart the computer to check the issue.

  Check if the system is able to detect the network. If this is not the case, go to method 4.

  Method 4:
  Temporarily disable the security software (if any), and check if it helps.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Additional information:

  Windows wireless and wired network connection problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• After Microsoft automatically installs the updates, I am unable to connect to the Internet.

  After that Windows update installs on my Vista Home Edition, I can't connect to the Internet. (My updates are automatically installed at 03:00)

  If I come back before 03:00 there 12:A.M. as a restore point. I click Restore system to 12 hours and I am able to retrieve Internet Explorer 8.
  However, updates are eliminated and the same updates are reinstalled at 03:00 the next day. Again not Internet Explorer. It lists the 11:00 the previous day as a Restore Point but then lists it as "undo the restore operation. Further, most number of updates is removed. Any help would be greatly appreciated.
  ptfitzy

  Never, EVER use system restore to 'Cancel' an update, Service Pack, or upgrade of IE! Instead, uninstall the update, Service Pack, or the IE patch & reboot. If that does not resolve the problem,then try System Restore.

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
  http://support.Microsoft.com/kb/942818

  If not help to tweak the parameters of your third-party firewall, try the following:

  1. disable your antivirus, all modules of Norton (as applicable), a real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer of Spybot, AVG AS guard.exe, SpySweeper guards, etc.), disable the third-party firewall AND THEN select Windows Firewall.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) except #4 below until your antivirus application has been reactivated! If you use a free ZA firewall, you may need to uninstall instead of disable.

  2 Uninstall "A security update Cumulative for Internet Explorer 8 for Vista (KB976325)" or "Security Update for Microsoft Windows (KB976325)" viastart | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update | Installed updates & restart.

  3 d - c #1 above.

  4 manually run Windows Update and install important updates available (i.e. KB976325).

  5 reboot & make sure everything in #1 above is on again and, if necessary, disable the Windows Firewall and enable (or reinstalling) your third-party firewall.

  =====================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

  Original title: unable to connect to the internet

  Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

  Oh thanks for the help but I fix it myself. I just did a system restore to a month before

• After xi acrobat update, asking to validate new product, says unable to connect to the internet, but clearly connected as I write this post.

  After xi acrobat update, asking to validate new product, says unable to connect to the internet, but clearly connected as I write this post.

  Seems to be counterfeit software.  Checked the site and has the wrong serial number.  Looking to show several spelling mistakes in the 'fine print' on the box.

• Unable to connect to the internet after the installation of security updates

  Original title: whenever I have install a windows update and restarting, I can't connect to the internet.

  updates of the problem are all updates of security

  Another problem - whenever I try to download a game comes the message that the download is interrupted because the rollback feature

  Hi pjm1948,

  1. you receive messages or error codes?

  2. How are you trying to re-establish the Internet connection?

  3. which of the update that you are trying to install?

  Step 1:

  You can try to run the Network Diagnostics tool and check if it helps.

  Check out the link:

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Step 2:

  You can try to check the history of update to the number of KB of the update that causes the problem.

  Check out the link:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  You try to install the update manually download from the Microsoft Download Center.

  Check out the link:

  http://www.Microsoft.com/downloads/en/default.aspx

  About the issue with the download of the game, you receive this error message when you try to download a particular game?

  You can read the following article and try the suggested steps.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: unable to contact IP driver, code 2 error unable to connect to the internet.

  Original title: failed to contact the driver of the intellectual property, the error code 2.

  Using XP Pro SP3 with MSE, I got, perhaps, AV Protection 2011 virus. After cleaning, I couldn't connect to internet... Internet access icon showed I was connected, but I was unable to connect to any site. On startup, I got the error that spampal is unable to use port 110 and this that I solved it by uninstalling Spampal. As a result, I now get 'unable to contact driver ip, code 2 error '. Device Manager will not display any errors.

  I did reset winsock.

  IPCONFIG/all reports ~ an internal error: the request is not supported.
  Contact the Services de Support technique Microsoft for assistance.
  Additional information: host name of request impossible.

  Are there instructions to resolve intellectual property issues or should I do a system recovery?

  I thought that MicroSoft offers no support virus of cost recovery. Which would include management of this problem?

  Follow-up... I found some good suggestions that I'll try to Jack MVP and Molly Mae found at the related link ~ thank you

  Loss of the internet wireless connection, do not seem to have an ip address now, need help!

  Error code 2 is BACK to talk about 'file not found '.

  If you see this:

  Windows IP configuration

  An internal error has occurred: the request is not supported.
   
  Contact the Services de Support technique Microsoft for assistance.

  Additional information: host name of request impossible.

  Take a look in the folder c:\windows\system32\drivers for this file (assuming that XP is installed on your C drive):

  Tcpip.sys

  If the file is missing, you must replace it.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Look there for a backup copy of the file tcpip.sys and paste in the c:\windows\system32\drivers folder where it belongs.

  If you do not see a copy in the dllcache folder, search for a copy here:

  c:\windows\ServicePackFiles\i386

  If you do not see here, you can download it from my SkyDrive and network disks exceeds the system afflicted on a USB or floppy drive.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called tcpip when the name of the file should really be called tcpip.sys (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• HP ENVY laptop model m7-j020 d: unable to connect to the Internet

  I have a HP ENVY 8.1 Windows running.  No problem until a few days ago, when I couldn't connect to the internet (no e-mail link or a browser).

  Wireless and ethernet connections seem to work. I can connect to the internet via another PC, smart phones, etc.

  E-mail started acting erractically. I tried to restart the computer, and then he started to install updates.  Not sure if she did because it does not connect to the internet.

  Based on the suggestions of another post, I tried: flushing the DNS, reset the battery TCO/IP and resetting the catalog.

  Restart the PC without installation updates has not improved the situation.

  Any help would be greatly appreciated.

  flynkites

  Hello @flynkites,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how you are unable to connect to the Internet on your laptop, and I'd be happy to help you in this case!

  Since you've already tried the DNS of hot flashes, to reset the TCP/IP stack and reset the catalog, I advise you to follow the steps described in this document on the resolution of problems in Internet Explorer (Windows 8), as well as resolve and prevent viruses on your computer (Windows 8). This should help you to access your browser and e-mail on your desktop.

  If the problem persists after completing all the steps in the above resources, please contact our technical support by clicking on the link below to get help from your region number.

  www.HP.com/contacthp/

  I hope this helps!

  Concerning

• Unable to connect to the internet update version

  I've updated to the latest version 35, but since then, the browser seems unable to connect to the internet. I thought it was my firewall that was blocking the program. I did what was suggested to work around this problem, that is, to remove my firewall and then add it again. But it does not solve the problem. There is nothing wrong with my internet, how am I be able to connect to internet by using IE or Chrome. And I was able to connect to the internet in the previous version of Firefox. Unfortunately, the new updated version is not allow me to. Have no solution?

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls