Unable to connect to my Kodak ESP 9 wireless

I tried everything in the book.  When I went through the wifi set up after having successfully entered my SSID and the WEP key, it came with an ip address that was not even close to my other network IP address.  I then manually entered a correct IP, printer says connected with my ip, disabled norton 360 antivirus and smart firewall and tried both installing Kodak printer and windows add a printer and also windows connect to wireless devices. has run troubleshooting windows printer and troubleshooting adapter without success.

Make it so that the rules of the program for norton were correct, and still nothing.

Help

Hello

a. the printer not be recognized at all?
b. you see the printer in devices and printers?

If it is visible in devices and printers, and then follow these steps and check if this solves the problem.

Uninstall completely the printer and printer drivers. Then unplug the printer.

You can follow these steps to remove the printer:
1. open devices and printers, click the Start button, and then click the start menu, click devices and printers.
2 right-click the printer you want to remove, click on remove the device and then click Yes.
If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes. If you are prompted for a
Administrator password or a confirmation, type the password or provide confirmation.

Then download the latest version of Kodak ESP 9 for Windows 7 software.

You can download the driver from the link below:
http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?PQ-path=13658/13661&product=EKN035328

After you download the driver, connect the printer and install the driver manually.

You can check this link for help:
http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

If the problem persists, contact Kodak support for further assistance.

Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Unable to connect to secure linksys WRT54GS2 V1 wireless router

    I just moved in with my friend and I'm unable to connect to linksys WRT54GS2 V1 wireless router.  My roommate can connect his computer laptop and desktop to the wireless router, but my iphone and the laptop cannot connect.  I tried both of my devices on a wireless network to a friend, and all both worked well.  We even changed AND removed the password and it won't let me log on to internet.  I went through the forumns and FAQS on the site, looking for suggestions.

    Thank you

    Are you MAC to your iphone and laptop addresses in the filter?

  • Unable to connect my other laptop to my wireless more

    In addition to having the same problem with the new Ipad. tried to reset the homegroup, sharing, even changed to no password to connect. Same problem does not connect.

    Hi Bernie Niehus,.

    Thanks for posting your query in the Microsoft Community. According to the description of the problem, you are not able to connect to the network via a wireless connection. Provide the following information:

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         What is the brand and model of the laptop?

    ·         You use a third-party security software?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    Startup options (including safe mode)

    Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

    Method 3: Follow the steps in the article.

    Windows wireless and wired network connection problems

    You can see these articles for more information:

    How can I troubleshoot network card?

    How to reset the Protocol Internet (TCP/IP)

    I hope this helps. Let us know if you need more assistance.

  • Unable to connect to the network via a wireless connection.

    cannot connect to a wireless network adapter not connected

    can get Wi - Fi adapters

    Hello

    Do you have any software installed on your computer network monitoring?

    Monitor mode, or RFMON (Radio frequency monitor), allows a computer with a NIC (NIC) to monitor all traffic received from the wireless network. Unlike promiscuous mode, which is also used for packet sniffing, monitor mode allows packets to capture without having to associate with a network access point or ad - hoc first. Surveillance mode applies only to wireless networks, while "Promiscuous" mode can be used on cable networks and wireless. Surveillance mode is one of the six modes of 802.11 wireless cards can function in: Master (acting as an access point), Managed (client, also known as station), Ad - hoc mode, mesh, Repeater, and monitor.

    Limits

    Usually, the wireless adapter is unable to transmit in monitor mode and is limited to a single wireless channel, if it depends on the driver of the wireless card, its firmware and features of all of his chip. In addition, in monitor mode, the adapter does not check to see if the control of cyclic redundancy check (CRC) are correct for packets captured, then some captured packets is maybe damaged.

    If a network monitoring program is running on your computer, the wireless network adapter will be set to follow the fashion, which prevents Windows to connect to wireless networks.

    To connect to a wireless network, close the network monitoring program, or follow the instructions in the program to exit the monitor mode.

    Solve problems, find wireless networks
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

    Let us know if this helps

    Concerning
    Anthony

  • Unable to connect to the Network Time Capsule wireless

    I just changed ISP (AT & T to Time Warner) and I use my own modem cable (Arris SB6141). I connected by TC via the WAN and knitting laptop via the connection to the local network, but now only my MacBook Air (El Capitan running) connects to the wifi network of TC. Nothing else connects; AppleTV (w/Siri), iPhone 6s (9.3.1). Is there a compatibility issue that could be the cause of the problem between the modem and the TC? Or is there something I'm supposed to change with the settings? It worked fine when I was using a router 2WIRE AT & T U-Verse.

    Looks like the router Mode of the time Capsule airport is set to Off (Bridge Mode)... (which would have been correct for use with a 2Wire product)... but, it must be set to DHCP and NAT to use with a simple modem.

    Turn off the modem for at least 20 minutes... more won't hurt

    Turning off time Capsule

    Make sure the Ethernet cable from the modem connects to the "O" on the Time Capsule WAN port

    After the 20 + minute modem switch off period has finished, turn on the modem and let it run for 10 minutes

    Then, turn the time Capsule and let it run for 5 minutes

    On your MacBook Air...

    Open AirPort Utility... (Finder > Applications > utilities > AirPort Utility)

    Click on the image of the time Capsule

    Click on edit in the window that appears

    Click on the network at the top of the next window tab

    Make sure that the setting of router Mode = DHCP and NAT

    Click Update at the bottom right of the window and give the time Capsule a minute full to restart

    Recheck the network and report on your results

    Unfortunately, the SB6141 and Apple routers not always who hear well together, so keep an eye on the issues

  • NB100 - new user. Unable to connect to the internet via a wireless connection

    * What can someone help please.*

    I bought a NB100 (Ubuntu) yesterday.
    He walks and he finds our Wi - Fi connection and got to the web. Large.

    I then ran "Update Manager" and since then I can not get internet connection.
    In 'Network settings' it shows only "Wired" & "Point to point" as the connection types.

    Also when I now click on 'Firefox Web Browser', 'Update Manager', 'Pilot' or 'Add Remove Programs' the equivalent circular hourglass appears for a few seconds, then disappears. The application does not start.

    Any guidance would be appreciated.
    Thank you.

    Post edited by: ikelsey

    That's exactly what happened here. See my post very recent inquiry about obtaining later to work. Which might be of interest, you can try the latest version to see what you think without having to install.

    With personal advice of an expert, we got the original Toshiba up-to-date and very well with the internet installation, but he still had "problems" with the sharing of files on my Windows network.

  • HP Photosmart D110a: unable to connect to my my router D110a wireless Comcast

    I tried to connect the printer D110a to my router to Comcast Dual-Band 802.11ac, I can connect to the xfinitywifi with no problem, but not my router

    Replacement/change your wireless router, try here.

    http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

    Make sure that your router is set to a fixed channel wireless as the 1, 6 or 11, never 'auto '.  Try channel 1 first and then the other one at a time.  Make sure that the printer and the router are spaced at least 5 feet.

    However, if you have a gateway device (modem + router), all gateway devices are terrible for connectivity and wireless performance.   If this does not work, suggest you put this bridge in full bridge mode device and install your own router of high quality that YOU have full control over.

  • Unable to connect my laptop to the new wireless printer - error "installation failed" after entering my password/security key (WPA)

    I just bought an Epson printer. I went through the installation process on my laptop but I get the "Failed to install" error message after entering my password/security key (WPA). I am with BT and my home hub I have "Wireless Key", "PIN WPS wireless" and "Admin password" - which is it? I tried all three and not joy. Help!

    It is almost certainly looking for your "wireless key".

    The WPS Pin is only used if the printer supports "Wi - Fi Protected Setup" - which it probably isn't, and the "Admin" password is used to access your BT home hub to make configuration changes.

    In addition to identifying what wireless Epson printer you have, you can either

    • b changes to the configuration of the printer from a screen on the front or
    • (b) to connect to the printer by an Ethernet cable or
    • (c) to connect to the printer with a USB cable?
  • Unable to connect to the internet through the wireless network

    original title: this computer does not have an installed and configured wireless network adapter

    Hello, about a week ago I just reformatted my Windows vista computer, and now I do not have a wireless network and I cannot connect to the internet, I use another computer to do this, and only the network card I have is Marvell Yukon 8888036 PCI - E Fast ethernet controller. Please help I really wanet to go on the intrnet. My computer is mobile intel r 945gm express chipset controller 0 microsoft corporation wddm

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > looking for Vista drivers newer network adapters/etc > download/install the.

    The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Troubleshoot network adapter problems to Microsoft link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • DeskJet 3630: Unable to connect my Deskjet 3630 for Mac wireless

    Hello

    Whenever I have disable my printer - or it is idle for a while - my mac loses his connection with it. Does anyone have any solution for this? It's quite irritating to uninstall and reinstall the printer software every time.

    Thanks in advance.

    Hello

    I have included some additional information below on the question about printers that log regularly and who can also help.

    http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876/document/c04249334/

  • Unable to connect to the broadband router by wireless or cable ethernet hub is active as my xbox living works through it will need to activate the ethernet port and wireless function bt someway

    may need to download drivers

    It comes with Vista, upgrade install and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

    "Connect to a network, mail and the Internet."

    They will help you with your question in the Vista Networking Forum above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Unable to connect to a network (Windows 7) wireless

    Hi, I recently installed Windows 7 (build 7000) as my main OS in my laptop. Everything works out of the box, with the exception of a few things. The most important of them is my (rtl8187b) wireless device.

    After you install the operating system, the device gets recognized and installed normally with a windows driver. At home I have a secure WPA network, lets say named X.

    When it gets detected I try to connect to it. After writing the network password, I get a window like the following

    http://img14.imageshack.us/img14/6835/step1h.jpg
     
    So I press the link Search and solve the problem , and he told me it's a question of connectivity, as I press fix of the problem, it resets my adapter and tells me that the problem was of Solver. But it does not. Any idea? I thought to install another driver for the card, but I do not know how to replace the default driver with the operating system.

    Thanks in advance

    Hello JuanPablo89,

    Yes, you must install the driver appropriate for you network adapter.  You are able to replace the default driver by accessing just the manufacturer's Web site and download the driver.  Normally the package is extracted into a directory, don't forget toe do not forget this place.  Follow the wizard to install accordingly.  This process would replace your default driver.  Or, you can download the driver from the manufacturers website and extract it in a directory, remember the location.  You can enter in the Device Manager and right click on your network adapter and click Properties and select the option "update driver" do not forget to specify the location where the files were extracted.  More likely that you will be prompted with a generic driver, you may need to click on "Disk" and specify the location that you, the drivers were extracted to.  If you would please with me are soon, I'd be very happy.

    Thank you

    Aaron Griffin
    Support engineer
    Microsoft technical support

  • Unable to connect my 110 e want to wireless

    I tried for several months to connect my HP Envy 110F wireless... I followed Hp troubleshooting. I am now at the direction to add my printer mac address to my drivers so that it can access. How can you add the Mac address, without indications on how to do it. Help!

    Oh, it looks like that your radio has failed.  Please contact HP support: www.hp.com/go/totalcare (click on printers & monitors, there is a phone number on the resulting page).

  • Unable to connect to the internet via the wireless HP Pavilion DV2120us

    Recently, I did a new install of XP and updated all my drivers. It took me awhile, but I was able to correctly update all the drivers in Device Manager so that there are no more yellow question marks. But now I can't connect to wireless internet. I don't know if I need to install something that I did not already.

    H, Shannon:

    This is not good news...

    Your series of templates had motherboard problems and one of the problems is that the card mother overheating demolishes the video and takes the mini-PCIe port that feeds the wireless card.

    http://Forum.NotebookReview.com/HP-Pavilion-notebooks/233974-DV2000-dv6000-DV9000-recall.html

    Paul

  • S10 - 3 is unable to connect to the Internet (wired and wireless)

    I just buy an Ideapad S10-3 five days ago. It cannot connect to the Internet.  When I connected the cable, ago no light if the cable worked fine on other computer laptop just now.   I checked the Local area connection status and it showed as follows:

    Support: IP address: 169.254.15.3 mask: 255.255.0.0

    He can't work wireless even if I turned on the radio.  My netbook OS is Windows XP.  Thank you!

    Hello and welcome,

    Make sure that this router have no firewall or filtered mac address running...

    try to reset the router and plug in wired LAN...

    don't forget to turn on wireless, the S10-3 is on the side of the right screen key near the hinge...

    IP Address: 169.254.15.3 wrong - should be 192.168.xxx.xxx in this range

    Subnet mask: 255.255.0.0 - wrongly - must be 255.255.255.0

    cordially KalvinKlein

Maybe you are looking for

  • The Distribution Service of software update

    Hello I got a laptop and it's a Toshiba Satellite with Windows XP Media Center Edition. Each day about 12 o´clock he said that some update is almost done, and I have to restart my PC. When I do this, I find that I don't have internet, but MSN Messeng

  • Potential problem of keyboard - special characters

    Hello! I recently encountered a problem, and it is reproducible. When you type in Chrome on my Macbook Pro 13 inch Yosemite running, if I try to type a special character (for example, an 'e' with an accent), the keyboard becomes unresponsive. If I re

  • Ran the system recovery and now all my pictures are gone

    Original title: photos of lost. my photos have disappeared since I ran the system recovery. Can I get back them?

  • sndvol32.exe

    My sndvol32.exe file is missing, is at - it another way to install except downloading them out of my windows xp cd, because I lost that. I don't really have anyone that I can borrow one. Can I get a free download online somewhere?

  • Unable to access Internet

    Unidentified network I have a network not identified on my computer is blocking internet access. How can I remove it?