Unable to connect to network WPA2 with Windows 7 64-bit (Intel 4965 and Cisco WUSB600N)

Similar Questions

• Unable to connect to network WPA2-Enterprise with Broadcom BCM4352HMB 802.11ac WiFi 2 x 2

  HP Envy 15 t-J100 using BCM4352HMB 802.11ac 2 x 2 WiFi driver version 6.30.223.221 on Windows 8.1 Pro 64-bit.

  I get an error trying to connect to my network wireless to work with "Unable to connect to this network." using WPA2-Enterprise authentication.

  The network appears in the list of available networks and the guests for my credentials (username & password), then it attempts to connect to it.

  A co-worker next to me has no problem with Win8.1, but has a 802.11n chipset (non - ac).

  I connect very well to my home network (802.11n) using the WEP protocols.

  I saw a post that might be one that this driver tries initially to connect with the COMPUTER instead of the USER name?  He suggested demotion to a Win7 64 bit, but I'm not find driver that I am willing to try.

  In the network configuration (802.1 x settings), I set myself to SPECIFY the MODE of AUTHENTICATION = "User authentication" without success.

  Solved the problem by installing the version of the driver 6.30.223.9 Win7-specific (sp64737).

  I can now connect to WPA2-Enterprise through Cisco Access Points.

  Driver is here:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D3%257CswItem%253Dob_126926_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Solution found in this post:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-software-recovery/Windows-7-x64-envy-700-109cb-only-missing-2-drivers/TD-p/3352711

• Unable to connect to the router with windows 7?

  I have just bought an Acer Revo R3700 and installed Windows 7 above, but I can't connect to my router.

  My router is heaven and successfully has 4 laptops (both under Vista, two 7 running), an Xbox and a Wii and two smartphones connected to him. Yet I just can't do this system to connect to him.

  I'm at my wits end... I've tried absolutely everything. I searched the Microsoft answers site found several similar problems and tried a lot of solutions, including adding files in the registry and update drivers.

  At first I could connect to the internet every now and then, but it was biblically slow (I tried to download Google Chrome and got him to 0.2 Kbps) and soon disconnected. Now I can't connect at all.

  I just downloaded a the Ethernet controller driver and updated a driver WLAN as they apparently do not come with Windows, but it still doesn't work. Although the message has now changed to "Unable to connect" to "Limited connectivity" (even though I think it's more coincidence than anything else)

  It should not be a question of signal strength, like the Xbox and laptop computers work fine when placed next to her.

  Really needed a solution to what running an ethernet cable is not really an option :(

  Thanks in advance guys. I'll be happy to provide any additional details if you need it :-)

  EDIT: / / I would add that I seem to be able to connect fine with a phone as a hotspot? It is very very weird.

  EDIT: / / I just managed to connect, but its very slow and not changed anything for the last 100 times? Everything seems to be completely random when it let me? : S

  Hardware support comes equipment - including the drivers/software manufacturers to use such software in all operating systems.

  Looks like a possibly faulty hardware or shotty (the wireless network device.  Make and model)?

• Receiver wireless XBOX 360 will not connect to the controller with Windows XP 32-bit

  I bought the receiver the other day and tried it on my computer. I installed the stuff that came on the disc, no problem. I plugged the receiver and tried to turn on the controller and it simply not picking up the controllers. I tried on all 3 of the controllers that I own, but nothing helped. I looked the problem on google and all say to install the new drivers on the "unknown device", but that doesn't seem to be the issue.   My computer doesn't pick up the 'Xbox 360 wireless receiver for Windows' device no problem. But when I try to sync the receiver with the controllers I get nothing.  He also says that I have driver 2.1.0.1349 if that helps

  Hello

  You can download Xbox 360 Controller for Windows using the following link:

  http://www.Microsoft.com/hardware/en-us/d/Xbox-360-controller-for-Windows

  If the problem persists, I suggest you to contact Xbox support for help.

  http://support.Xbox.com/en-us/contact-us

  I hope that helps!

• Printer still prints nothing or only partial pages with Windows 7 64 bit

  I have a laptop HP with Windows 7, 64-bit four months and I am currently on my THIRD new printer.  When I send a print job to the printer, the printer lights up and prepares to print, and then print anything at all or part of a page and then gives me an error message and cancels the job.  This happened to start with a new HP printer, so I took it and got a new Lexmark printer.  When the same problem happened with the Lexmark, I brought back and now have a brand new Epson.  All three printers have had the same problem.  With the last two, I have tried everything - unplug the printer, the print queue, compensation uninstall, and then reinstall the software, ensuring that programs have been allowed on the Windows Firewall, temporarily disable AVG etc.  A recent post, I found said that to change the print of 'Print immediately' settings to "Printing after last Page is wound" (or something like that) helped, but I tried and it did not help me.  I did a lot of research on Google and it seems to be a persistant problem with Windows 7.  Admittedly, I found that it is not a problem with my printer.  Help, please.  I am a student who is very desperate to print and do not know what else to do...

  Hi Lady Justice.

  I suggest to test your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to internet home with Blackberry 8900 for windows 7

  Unable to connect to internet home with Blackberry 8900 to windows 7, error = a network cable is not plugged in correctly or may be broken, tried a different cable, same problem?

  Hello

  1. are you able to use the Blackberry 8900 on any other computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Support for attached modem use

  http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=55C4DA5CE489E53E47CDDDB9FA0C6A59?externalId=KB05178&sliceId=2&cmd=displayKC&docType=kc&noCount=true&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl

  If you are still experiencing a problem, I suggest you to contact Blackberry support team for assistance.

  http://supportforums.BlackBerry.com/T5/community-corner/BD-p/corner

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Unable to connect 660 s Inspiron with Win 7 Ultimate to the internet

  Unable to connect 660 s Inspiron with Win 7 Ultimate to the internet. Window, says "you are not connected to a network.  Clicked on the difficulty of the problem of connection and new window says "install a driver for your network adapter."   The computer is connected to a Xfinity modem via an ethernet cable and no wifi.  Still nothing. How to connect?

  Happy it all resolved now.

  Please mark this thread as answered.

• I can't connect to wireless internet with windows vista

  I bought a new HP Pavilion dv6 laptop with Windows Vista and I tried to connect to the internet from my laptop via router ADSL2 + wireless D-link but my network is not visible wireless.

  I tried to plug my ether cable and this time my network was visible, but it would not connect.

  I am able to connect from another laptop with windows XP wireless through the same router.

  My HP laptop connects via WiFi in other places, but not at home via D-link router.

  I am not able to connect to internet from my laptop HP since I bought it 9 months ago.

  
  

  What can possibly be the reason? Can you help me connect to the internet?

  Thank you

  It seems that your settings are not correct for the access provider or router (or both).  I suggest that you contact your ISP and have them walk you step by step in the process of installation and configuration and do not let them off the coast of the Nigerian line you have a good connection, as you wish.  They know that the parameters so that we don't have, so they can help you better than we can, and I'm sure they will be happy to do.

  Here is an article (with many additional useful links) on how to set up a home network in Vista:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on how configure and connect to a Vista wireless network: http://www.watchingthenet.com/windows-vista-tip-how-to-setup-and-connect-to-a-wireless-network.html.

  Here is a Microsoft Technet article on how to install and connect to a Vista wireless network:http://technet.microsoft.com/en-us/library/bb878035.aspx.

  Between these three articles and assisancce by your ISP, you should be running without delay.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• General bluetooth connectivity issues phone & mouse with Windows 7

  Hello

  I had a lot of difficulty trying to connect my bluetooth mouse and the phone to a new installation of Windows 7 64. It is not a Toshiba PC but the Toshiba stack is the only one that I can get my phone to connect with now and this seems to be a forum active bluetooth hoping there might be some bluetooth here experts who have answers or at least can point me in the right direction.

  I found a lot of people on google which seem to have similar problems, but after hours of searching and trying allsorts it doesn't seem to be something close to a final solution - only a variety of trial & error solutions that look they have worked for some people but not others.

  In any case... I have a mouse of laptop from Microsoft 5000 and a mobile PHONE Nokia 2330, I've already had TWO drivers bluetooth windows standard and connected together with no problems at all on my laptop Dell D620 (with built-in bluetooth) and also my old PC using a cheap no brand bluetooth dongle.

  Two of these computers were running XP (that's the problem I would say haha - why didn't I I never 'improved' for Win 7?)

  So after a fresh install of Win 7 64 I also got first wired mouse and works very well and on the other hand the phone on and works fine via Nokia PC Suite. It worked perfectly until a few days later I found that the phone wouldn't connect (mouse doesn't always work well).

  In Device Manager there is an "unknown device" named ' device Bluetooth Device "" which is the phone I think, but Windows can not find the drivers for this device.

  So I tried now following...

  Disconnect and reconnect the dongle (in different USB Sockets)
  Making sure the phone and the computer are set to discover
  Change the bluetooth support service manual and not automatic
  Change the service to support bluetooth in the journal on as the Local System account
  Unpairing the phone with the computer, but it still won't detect it again.
  The dongle of uninstalling and reinstalling

  By this time he had met on the website of Nokia showing what batteries are compatible with the software PC Suite - it does not say what the PHONE has, rather that software, but I can't even phone to connect with Windows.
  32-bit editions and 64-bit Windows 7:
  Microsoft Windows Bluetooth stack
  Battery Bluetooth WIDCOMM, the driver 6.x versions
  Toshiba Bluetooth stack, versions 5.10.12 and 6.10.10 drivers 6.30.01
  IVT BlueSoleil Bluetooth stack, versions of the drivers 5.0.5, 6.2.227.11 and 6.4.245.0

  > But then found that this happens if you try to use it with material not Toshiba. Although she is supposed to be a 30 trial and what past 1 hour after installation?

  You know what?
  Find BT base of knowledge here on the Toshiba EU support page:
  http://APS2.toshiba-tro.de/Bluetooth/

  There is an area of the Knowledge Base where you might find interesting FAQ How use BT

  I read that BT stack can be used only with the module BT Toshiba or Toshiba BT material.
  For other materials BT only a 30 days trial version is available.

• laptop computer (HDD 320GB) with windows 7-64 bit OS.iam unable to shrink the drive c less than 155 GB

  Hello Sir,

  recently I bought the laptop (320GB hard drive) with windows 7-64 bit OS.iam unable to shrink less than 155 GB c drive please help me. I want to reduce this to 90 GB

  Its also the case that win7 takes only supported 4 basic partitions and you can't mention what Disk Management displays for drive 0.

  And also if a pre-installed version of victory, if you manage to create partitions and at a later date, you will need to use your recovery disks, that may well destroy all created partitions.

  For what reason you want to partition?

• whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and then restart windows.

  whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and windows restart.can any1 help me with this problem. my wireless card is qualcomm atheros AR5007 802.11b/g.my windows is windows 7 ultimate.please help with this issue.i m attaching files and dump the error image
  screenshot of error:

  http://sdrv.Ms/Nn8gDA

  memory dump file:
  http://sdrv.Ms/NiXJdJ

  Also, can you provide the latest files minidump since reinstalling the NIC driver.

• How to add a second connection of the user with windows 8

  How to add a second connection of the user with windows 8

  Go to the Control Panel, then click on change the Type of account in respect of the accounts of users and parental control.  Beneath the box with user accounts, there should be a link that says add a user account.  Click on that and follow the instructions to set up another user.

• HP990Cse connection via print sever in Windows 7 64 bit

  I want to install drivers for a printer HP990Cse that is connected through a print server built into my WD Netcenter network drive. Windows 7 (64-bit) can find the printer, but not the driver. In addition, this printer is not in the list provided in Windows. He asked that the location of the driver files (Browse button), however, I am unable to download driver from the HP website files. All they have is an Assistant to allow the connection via USB or ask the user to just plug the printer on Windows and that it will give the driver. I'm not connect via the USB port, so I don't know what to do.

  When you install a Brother printer, I have had no problems since I could download the driver files, place them in a folder and then point Windows to this folder. Where can I get the driver of this printer files or what procedure should I use to install this printer?

  Thank you

  I'll answer this question myself in the interest of all those who might find themselves in this position. After some advice I found on the Internet. I did the following:

  1. I installed the printer as a local printer on the USB port allowing Windows to provide the driver. He worked to find plugged into a USB port.
  2. I then backed up the printer to the print server in the NetCenter.
  3. Then, I went to the driver on the ports tab and added a new port with the network printer path. For example \\printer_server_name\printers\DESKJET-990C.

  It did not work, however. So I went the network and sharing Center and selected the option to view computers and devices which shows print server. I double clicked on the print server, which then displays the connected printer. I double click on the printer to connect to it. I got a message saying that the driver is not found. I clicked on OK to install the driver. When the list of drivers appeared, I have selected HP in the left column and guess what? The 990C printer driver and a bunch of HP printer drivers more have been listed. I chose the 990c and everything worked fine.

  I don't know if the installation of the printer locally caused Windows fill the list with several drivers of HP, but it seems like if she did because these drivers were not in the list before.

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi