Unable to connect to remote PowerShell and get error message.
I have two computer to Windows 7.
Unable to connect to remote PowerShell and this error message
nvoke-command - computername XXXXXX - scriptblock {}
get-process} - administrator credentials
[XXXXXXX] failed to connect to the remote server XXXXXX with the
error message: WinRM client cannot process the request. If the
authentication scheme is different from Kerberos, or if the client computer is
not joined to a domain, then HTTPS transport must be used or the destination
machine must be added to the TrustedHosts configuration. Use winrm.cmd
to configure TrustedHosts. Note that computers in the TrustedHosts list might
do not be authenticated. You can get more information about it by running the
following command: winrm help config. For more information, see the
about_Remote_Troubleshooting help topic.
+ CategoryInfo: OpenError: [XXXXXX], PSRemotingT
ransportException
+ FullyQualifiedErrorId: ServerNotTrusted, PSSessionStateBroken
PS C:\windows\system32 >
PS C:\Users\Administrator > Invoke-Command - ComputerName XXXX - ScriptBlock {get-process} - administrator credentials
[XXXXXX] failed to connect to the remote server XXXXX with the following
error message: the client cannot connect to the specified destination in the
request. Verify that the service on the destination is running and that he accepts the
applications. Consult the logs and documentation for running management service
on the destination, most IIS or WinRM. If the destination is the WinRM
service, run the following command on the destination to analyze and configure the
WinRM service: "winrm quickconfig". For more information, see the
about_Remote_Troubleshooting help topic.
+ CategoryInfo: OpenError: (XXXXX:String)], PSRemotingTranspo
rtException
+ FullyQualifiedErrorId: CannotConnect, PSSessionStateBroken
# Outgoing connection is fine because I can connect to a different machine here. However incoming connection does not work
# Tried several things like "Enable-PSRemoting - Force." and it starts Properperly
# And since I put the machine in workgroup, as well run "Set-Item WSMan: \localhost\Client\TrustedHosts * ' (it is running successfully as well)
# Infact WinRM QuickConfig will not work.
# And tried with and without firewall. and also applied several patches, but has not solved the problem
Please notify
Original title: WinRM
Tags: Windows
Similar Questions
-
Try to install Windows 8.1 and get error message: boot disk cannot be partitioned
I am trying to reinstall Windows on my Mac 8.1 and get the message error "boot disk cannot be partitioned or restored to a single partition. I ran across the 'bugs' usual suggested, that I found online with no luck. Attached are the screenshots that can help.
How have you managed to get two HDs of recovery on the same disc? You have two versions of OS X installed on this drive in the past?
-
Unable connect to the iMessage - and no error message
iMess on my computer stopped working the other day. Similar stuff has been examined in other threads, but my problem is a little different, since I get no error message. iMess wants connect me, and when I enter my details, nothing happens: I support on connect, then the system seems to think for a second, and then he wants me to support again connect as I never have. It does not say that my password is wrong or anything, separates me from other threads.
I not made any changes to my system. I can use on my phone without problem iMess.
I thought that perhaps Little Snitch had something to do with it (even though I made no change to the it for a long time). So I temporarily stopped, but no luck. It reveals the process of akd comes into contact with gsa.apple.com, so at least my part of this communication seems OK.
-
When I tried to connect my Win7 starter Netbook on my HP C5280 printer shared in my XP Pro SP3 desktop computer, this error message until I install the appropriate driver
PS:1 - Win7 allows me to choose the printer in XP to connect to.2 - I tried to create or increase the value of "IRPStarckSize" in the registry, in computersThank you for your helpHello
Thank you for your quick response.I solved the problem as follows:1 correct the evil of "IRPStackSize": instead, I wrote IRPStarckSize! " in the registry2. create / change the value of ""IRPStackSize ' to '25' in XP and Win7 Starter registry "4 - restart both computers.5 -Add a printer in Win7 starter, using 'Add a printer pop-up menu'6 - Select "create a new port. Select "Local Port" as the port type.7. in the "Enter a port name" box, type the address in the following format:\\ my XP Pro SP3 utilisateur\Mes shared the name of the HP C5280 printer8 - click Next9 - Choose the appropriate driver in the list of drivers.If no driver available, click the Windows Update button, wait for the process finishes and then look for the
driver again.10. complete the installation by printing a test page.Hope this will help other members of the Microsoft Community.PS installed anti software virus in my computer have no impact in my case. -
Original title: 1904.Module error cannot save C:\windows\SysWOW64\msxml4dll. HRESULT 2147023782 contact your support staff
I want to install hallmark card studio deluxe 2007 and I got this message
C:\windows\SysWOW64\msxml4dll Error 1904.module cannot save. HRESULT 2147023782 contact your support staff.
Someone knows how to fix this?
Thank you
Hi Roman,.
Thanks for posting in Microsoft Community!
It seems that you have a problem with the installation of Hallmark card studio deluxe 2007 and will receive error message "Error 1904.Module than c:\windows\syswow64\msxml4dll cannot be saved."I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.I may need a few more details to better understand the issue.
1. deal with any issue when installing any other program?2. did you of recent changes on the computer before this problem?
Method 1:
I suggest you to run the fixit and check if it helps.Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/program_install_and_uninstallMethod 2:
If the problem persists, I suggest to perform the clean boot and see if you can install the software.By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.Method 3:
If the problem persists, I suggest you try to remove all the temporary files in the temp folder. And check if it helps.Follow the steps to clear the temp folder:a. click the Start button and in the search in %temp% bar and press ENTER.b. the Temp folder opens, press on Ctrl + A , and then press delete.Note: I suggest that you backup important file or a folder in the Temp folder.You can check the links for more information:Install a program
http://Windows.Microsoft.com/en-us/Windows7/install-a-programInstall programs: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questionsGet back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence. -
Unable to connect to the Wifi router, no error message 'no Internet connection '.
Original title: my laptop is not picking up wireless when there is a WiFi connection available. What's wrong?
He said: "No Internet connections available" even when the router it onand I can get WiFi on other devices.
Original title: my laptop is not picking up wireless when there is a WiFi connection available. What's wrong?
He said: "No Internet connections available" even when the router it onand I can get WiFi on other devices.
Delete networks all memory.
Uninstall all the drivers for the wireless network.
Reset.
Install the latest drivers from support from the manufacturer of the computer's wireless network and the Web site to download drivers for your computer.
Restart your wifi access point.
Wireless Setup to connect to your wireless access point.
-
Had to send the laptop to the fooze and lock me up. Envoy and had the reset of the Bios, re - load and they said to update. I knew that I let go of a few things, but they said they would make sure that it is in good working condition before shipping back some. They never to put my servaice package 2 in most of my players, I had to do it myself, I can't do a backup drive, it lost 3/4 of it and will not be complete. it does not update the flash player, in fact everything was better before, before he locked. It is very frusrtrating and discouraged the service I received. I always try to make things right with her.
Hello
(1) do you have made no changes before this problem?
(2) what is the problem with the backup process?
(3) you receive an error when executing backup?
(4) what is the problem with the flash player?
(5) you receive errors during flash player installation?
For the problem with the slow, I suggest you follow the steps described in the links below.
Difficulty of the Windows system performance on slow Windows problems computers http://support.microsoft.com/mats/slow_windows_performance/
Optimize Windows Vista for better performance
The questions about the update, I suggest you follow the steps described in the article mentioned below
Windows Update error 800b0100
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100?SignedIn=1
To the question related to flash player, I suggest to uninstall and reinstall falsh player. Uninstall Flash Player | Windows
http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html
Install Adobe Flash Player 11.2.202.235
http://get.Adobe.com/flashplayer/
The questions about the backup process, I suggest contact you the hardware manufacturer who repaired and see if he can can send back and fixed it properly.
Hope this information helps.
-
Re-installing CS4 and get error message saying: database installation is corrupt
I'm trying to re - install CS4 on Windows 8 PC - keep getting database installation is damaged error
Error «...» The Installer database is corrupt... "When you install Adobe Creative Suite 3 products
-
Unable to connect to the internet and have problems with the help of program network Toshiba
Original title: I can't go on the internet?
I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.
Hi Alice,.
Please join Microsoft Community where you can find the necessary information on Microsoft products!
You are unable to connect to internet and unable to use a Toshiba network program.
1. what browser do you use?
2 are you able to open other sites?
3. Once you get a white page?
4. do you get error messages when you try to open the site to the Bank?
5 did you do changes on the computer before the show?
6. who is the program of Toshiba network you're talking about?
To work the issue with cannot connect to the internet:
Method 1:
See the site:
The problems of Internet connection
http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-Internet-connection-problems
Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.
To work the issue with Toshiba program:
Method 2:
Reinstall the boot program:
Step 1: Clean boot
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.
Check out the link:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.
Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).
Step 2: Uninstall the program
See the site:
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Step 3: Install the program
If the problem persists, then you try to get help on the Toshiba forums site:
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
I am unable to connect to creative cloud. The error that says Unable to get on the Adobe servers
Please see:
- Creative cloud activation and login troubleshooting
- Adobe Download Manager cannot happen on the Adobe servers
- Cloud cannot create arrived on Adobe servers.
You can try to remove creative cloud app and reinstall it.
- Using creative cloud | Uninstall the creative cloud desktop application
- https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html
Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html
-
I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?
Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.
-
I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)? Fact is need to update itunes?
Hi sonalnj,
I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.
According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.
iPhone 6 s Tech Specs
http://www.Apple.com/iPhone-6s/specs/Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.
OS X Lion mountain
http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lionNow the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.
Update of OS X El Capitan
https://support.Apple.com/en-us/HT201475Nice day!
-
I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH
What is your operating system and Service Pack?
What is your anti-malware?
-
Problems to connect a printer to my lap top using a wi - fi connection and get a message saying "print spooler not working do not ', even though troubleshooting it says it is fixed, any ideas please?
Original title: install a printer
I see an error message about "spooler" problems
A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.
If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.
To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:
To restart the print spooler service
You must be logged on as administrator to perform these steps.
Click Start, type: services , then press on enter on your keyboard
Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Right click on the print spooler service, and then click Properties.
On the general tab, next to startup type, make sure that automatic is selected.
If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
-
We are unable to validate this serial number for adobe lightroom. I just bought the upgrade to lightroom and get this message when installing
Fortunately the Adobe customer service has been able to help me by making a change to my hosts file.
Maybe you are looking for
-
iPhone 7 more - IOS 10.2
Recently, I just got my iPhone more than 7. Once I opened it started the update to iOS 10.0.2 If after that it worked I checked the camera looking for the portrait fearure but he isn't here! How can I have? In addition, the device is slow and hanging
-
How to get permission to write to the network drive access?
I installed a reader Networks to connect it to my router. It works very well for retieving files, but I can't write to it. I get a message saying "You must." authorized to perform this action Samsung computer laptop brand new, 6 GB RAM, CPU Intel San
-
T420 does not take into account the case of letters power on password
Hello! just noticed that when I boot my laptop with power on password, it accepts the password regardless of the case of the letters I get. For example, if the password is set to "qwerty" it starts with "qwerty", "QWERTY", "qWeRtY", "QWErty" and so o
-
Makefile for NT platform in the Windows 7 development kit
I want to create customized SSP/AP (Security Support Provider / authentication package) for Windows 7, so according to MSDN I should download the Windows 7 SDK code samples and start on their part. I did and I found there that folders with the makefi
-
Bought a new laptop today and I have a question.
Today, I bought a HP Envy DV7 - 7270CA C2H79UA, and on specifications, he said that the i7 processor can be turbo increased from 2.4 GHz to 3.4 GHz. My question is, how do I do exactly? Thank you very much. And the HDMI port, is just an exit, or coul