Unable to connect to shares SMB a Mac, another Mac can connect normally
I have a Mac under El Capitan 10.11.2 who years connected easily and normally for a couple of SMB shares on my home LAN. Since arriving at El Capitan (fresh install, bare metal, not an upgrade) that Mac can no longer connect to these shares.
Another Mac that I (also executed 10.11.2) connects easily and normally these actions.
The 'Mac problem,' I completely blew my keychain so way aren't saved SMB credentials. Various tricks using cifs: / / or nsmb.conf a few settings do not work, either.
On this 'Mac problem' I'm never not even invited to the SMB credentials. I get a very "quick fail" and a pop-up that reads:
There was a problem connecting to the server "
Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator. I can also "Browse" and see the servers on my home LAN, but when I click on "connect as...". "I get the same non-credential, quick-failed. I can connect to none of the user accounts on the 'Mac problem' - same failure mode for all user accounts. It's a weird thing. Any tips? I have an update with a bit more information. I have when I try to install it via the command line... $ mkdir/Volumes media $ mount_smbfs //raspberrypi/media/volumes/medias ... I get the error message... mount_smbfs: connection to the server has failed: operation not supported by device When I try to climb through the user of Finder interface ('Browse' then ' Connect under... ") ") a single relevant line appear in newspapers, via the Console and All the Messages . This line is: 16/01/16 12:22:51.297 PM sharingd [309]: 12:22:51.296: SDSharePointBrowser::handleOpenCallBack returned 19 It's the biggest "stumper" I never treated on a Mac since 1986. I am a computer pretty talented guy. I see that other people have this problem (or variations) and I tried most if not all so-called 'remedies' and nothing has worked. Again, my FIRST Mac can connect to all my SMB LAN House just actions. This 'Mac problem' was able to connect to these shares normally prior to my current installation of bare metal to El Capitan, 10.11.2. Tags: Mac OS & System Software Problem with WiFi connectivity with new Ipad Pro. Unable to connect to the wifi at home. My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home. I am able to connect Ipad Pro wifi work. On the Pro iPad, tap settings > general > reset > reset network settings You will need to re enter your Wi - Fi password. Then try to connect to your Wi - Fi network. If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network Identification of customer's Windows 7 NFS UID GID information I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS. I am able to properly connect Client NFS software by a 3rd party on the NFS server. However, when I use the Client for NFS provided by Windows 7, I am unable to connect. The \\ip address\share Z: mount"command fails with the error code"the path not found network ". I can't do a ping of the computer running the NFS server. The NFS Client operating system: Windows 7 Ultimate, 64-bit Data captured by Wireshark MOUNT V1 EXPORT call 3rd party client Machine name: PC MOUNT V1 EXPORT appeal of the NFS client It seems that the credentials of NFS Client are not correct. How can I change the flavor of AUTH_UNIX and the UID and GID to 1000? Hello VDAEMP, As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below: Unable to connect with the Mac computer? Unable to connect with the Mac computer? Please read https://forums.adobe.com/thread/1499014 -try some steps such as changing browsers and disable your firewall -also clear the cache of your browser if you start with a fresh browser -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip. https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html I can't get the client to install on my mac and I'm running out of ideas as to what is happening. The 5.5.2 client seems to work very well and if I broadcast the 6.0.1 client that also seems to work. I can not get the local installation to run. I always get the message "Unable to connect to host" when I try to run it. If I go back to the 5.5.2 client it works fine and I can connect to my 5.5.2 instances. OSX version 10.10.2 Version of Java 7 news 75 (at least that's the installer last ran, jdk installed 1.6.0 shows in /System/Library/Java/JavaVirtualMachines) I also see this error in the Setup log: Install uninstall: vRealize Orchestrator (install all components uninstall) Status: ERROR Additional notes: ERROR - uninstaller installation Error: java.util.zip.ZipException: error in opening zip file Because if this seems not uninstall it app works and I had to manually cancel the installation (which I might be leaving residues). I manually remove the file .vmware to my directory and also remove ~/Library/Preferences/.com.zerog.registry.xml then by removing the orchestrator in the front applications folder directory to re-launch the client install. Paul Paul, please file an SR on your side. Feel free to reference the bug I introduced (1409281) when I had the same problem. Customer filed SRs help push resolutions -Burke Azbill Unable to connect to the network "\\localmachine\sharedname" share I use VMware vCenter Converter Standalone client, v5.0.0 build-470252, running on a 64-bit Windows 7 computer, try to import a Windows 2008 computer virtual (hosted by VMWare infrastructure) on my local machine. At the start of the converter, I have "connecting to a local server. Specification of the source system is OK, even if I don't know the certificate error. The conversion wizard installs his agent and it connects OK. To the Destination System, I said: "When the converter checks the destination settings, it is reported: unable to connect to the network"\\localmachine\sharedfoldername"share So far the measures of investigation: -J' tried specifying the share as '\\localhost\sharedfoldername', but get "the share specified network 'localhost\sharedfoldername' does not exist." It was a bit of a long shot, I guess, but the form does not work in Windows Explorer. -Have you tried with the file and print sharing both power - on and off seemed worth a try after looking at other posts on this forum The help says 'If you are connected to a local Converter Standalone Server, providing a network path or a local path to the destination directory'. I tried the local path "C:\Virtual Machines\sharedfoldername", but got the message "error: specified as a (local) drive Destination.» "Please specify a UNC path such as: \\machine\sharename. Aid also States "You have not to provide user credentials if the location is on the local storage of the machine where Converter Standalone server running." However, the next button is always disabled until credentials are provided. Can anyone help please? You must be able to access the \\localmachine\sharedname of the * SOURCE * machine. The job of conversions P2V of Windows is to install an agent on the source, then the agent connects to the target (this is why it must be on a network share) and transfers the data. You can browse \\localmachine\sharedname of the source (but not where the converter is installed)? Unable to connect to the shares of the host, Windows XP I cloned a VM XP base today. The virtual machine was no shared folders enabled; I had problems with cloning of a machine with shared folders enabled, if I leave it on this virtual machine, that I keep around just to clone. When I try to activate the shared folders on the new virtual machine, I got this error: "could not update performance file sharing status: a message header has been altered or has the version incorrect." and I am unable to connect to the new action. I fixed the machine virtual and uninstalled and reinstalled extensions nothing doesn't. Any ideas what's happening? Version of Workstation 7.1.0 host and the guest XP SP3, update today. Hmm, I googled your error and did not find much. Just some VIX-related stuff, which would be only bite you if you installed programs after the installation of VMware Workstation - of the 'old' VMware 'old' a programs may have installed obsolete libraries for automation of VIX. Just after installing VMware Workstation/Player shouldn't cause a problem VIX. Question, you try to enable the records while the prompt is already on? If so, what happens if you stop the prompt, select the files and then put on the client? Unable to connect to MacBook from other computers on the network original title: I can access all windows for the PC and macbook computers, but I can't access the macbook on the PC. How can I access the macbook via the PC? I have windows xp laptop and a macbook. Computers portable windows communicate with each other and the mac book with correctly. All windows shared folders are accessible from any one of the three laptops. But we cannot access the macbook from the laptops of two windows. All the parameters of the SMB are fixed according to the tutorials and the macbook is visible, but are not accessible! Help please. Similar to that of all questions ask for specific things. I don't know where this question. Novice here I already searched the forums. Hello I suggest to refer to the thread and follow the steps provided by Jack MVP: Note: using third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk. Unable to connect to the Remote Agent of VMware Converter I'm trying to V2V an our old infrastructure of VMware 2.5.x our vSphere infrastructure W2K Server. I've done several servers of the old infrastructure without problem. On this particular server, however, fails with the error "Unable to connect to the Remote Agent of VMware Converter" The journal of the points below on the $ IFC share. [2011-01-14 12:32:40.008 'P2V' 4788 info] [ClientConnection, 101] Connection to IPC$ on 10.101.0.171 like 10.101.0.171\administrator [2011-01-14 12:33:10.086 'P2V' 4788 WARNING] [ClientConnection, 115] Unable to connect to IPC$ on 10.101.0.171. Reason: Error unspecified in the mechanism of the remote execution Any suggestions for a solution would be appreciated. It looks like maybe the firewall on the server. Install the converter directly on the machine you want to convert, or temporarily disable the firewall. Unable to connect to the App/iTune stores Since the 10 update on my iPhone iOS 6s; When I try to open the App Store or iTunes Store, it says "unable to connect". If I'm real quick when I open the App Store I can successfully hit a button update B4 I get the Error Message. It tries to open the iTunes store when I try; but without success. Everything works fine on our iPhone 5 s and my Mac. Ok.. Try here > If you can not connect to the iTunes Store - Apple Support Hi all I have a Power Mac G3 (blue and white case), processor 400 MHz, 512 MB RAM, 120 GB HDD and currently running OS 9.2.2/OS X 10.4.11 and I am unable to connect to my user profile on OS X. The problem started as a loop connection - I have entered my password only to be sent back to the login screen. Following the advice of another site, I deleted 'Preferences' of the user records and records of library system. The system now creates new folders, boots to the login screen, however to enter any letter on the keyboard results in the system locking up in a cursor tip / the "occupied" switches to the Rainbow ball and they're there - I can't do anything else but reset the system or put it to sleep with the power button I've done everything I can think of to try and fix it - safe mode displays the same symptoms above, chatty start freezes with a bluescreen once started, fsck in single user mode says that the disk is ok, like the disk first aid under OS 9. I also tried to reconfigure the memory (one of the modules is problematic intermittently, but no problems do not appear with OS 9 (and have not been apparent in the past with OS X) when he's not working - I tried to remove all the modules problem but possible connection problem) One thing I have not tried yet is to do a system repair / archive and install - my installation disc is an old version (10.4.1) which is currently installed - this would have an effect on the system in its current state with all my apps and folders present? Thank you very much Are you sure that your keyboard does not work properly? Unable to connect to home WiFi Hello. Using a 2012 MacBook Pro runs El Capitan 10.11.4 and unable to connect to Wi Fi home exclusively. We had to Time Warner to get out. They gave us a new modem/router and update the connections/splitter in the basement. All our devices but my laptop can connect to the network. Our iPhones, light fires and Mac Book of wife anything can connect. The mine detects the network but cannot connect. However, I can connect my computer to other networks through my Verizon Wireless hot spot and even a 4 G LTE Kajeet hotspot unit I borrowed from the library. Any ideas what could be going wrong? I ran Wireless Diagnostics and nothing turns upward. The most frustrating part id my computer "thinks" it is online, because the Wifi symbol is obscured. But I'm not connected. Thank you. Processor: 2.3 GHz. Intel core i7. Memory: 4 GB, 1600 MHz, DDR3 If you run any utility, including but not limited to clean my Mac Mac Keeper, Little Snitch, Wireshark, firewalls, etc. you must remove according to developers on their Web sites. Simply by dragging to the trash uninstall these and not help. Also any Mac antivirus application should be withdrawn from the system according to developers, even slide into the basket is ineffective. Once this is done, see this article Recommended settings for the WiFi routers and access points - Apple supported Can't use any search engine of FF 40.0.3 on Macbook Pro model with 10.8.5 OS 9.2. Receive "Unable to connect" message when you try to use a search engine. Other than the search engine and Mozilla Web sites to connect properly. 40.0.3 on another Mac FireFox works fine without any problems. In addition, I can not access the FF "Get modules" page or the home page of Mozilla. Search engines will connect not their home page or the search bar. Problem just started. I had previously been upgrade and have resorted, FF 40.0.3 without problem when it was issued. Solutions of attempts included refresh FF, launch FF in safe mode, run with all plugins disabled, graphics hardware acceleration disabled. None of these fixed the issue. Had already tried your suggestions, without success, but has once again to be sure. Without success. However, I made a further exploration of my own and found out that IPv6 is set to "Link Local" only in my router. I have reset on 'Automatic', the router reset to update, and my problem was solved. So it was the IPv6 setting (unlikely) or the router reset (probably) that solved the problem, or it is your suggestions I tried and did not work, COMBINED with the router reset which solved the problem (quite possible). Thanks for the comments! Suddenly 39.0 FF is "unable to connect" to any web page I use almost identical installations of 39.0 FF on both computers Windows 7 Pro. On computer 1, for the last two hours, I got "unable to connect" on each URL I tried. It can access things stored locally, such as troubleshooting information. FF on computer 2 is fine, and Chrome and IE work fine on computer 1. The problem started watching a movie on Netflix streaming on computer 1. The image suddenly froze and the speakers emitted a wicked repetitive noise - maybe it was 2 seconds of the movie soundtrack play again and again. Commands from the computer totally locked up. I kept only the noise of voltage with power button on the computer. I restarted the computer in safe mode, and then it restarted in normal mode. Now, everything on the computer seems fine - except Firefox. I tried to restart FF in safe mode; same problem in the corresponding mode. I saved copies of information for troubleshooting in safe and regular mode, and a copy of the submitted crash reports also list. I'll share these if you tell me how. (Can't do it with the button "Share data", of course, because I can't go to this form to ask a question on computer 1 - I am posting this to computer 2) The only thing I have not tried is "Refresh Firefox". I'd really rather not do that, because it will scan all my modules and customizations. Would appreciate any help you can offer. Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test. .... Make a check of malware with several malware scanning of programs on the Windows computer. Make sure that you update each program to get the latest version of their databases before scanning. Alternatively, you can write a check for an infection rootkit TDSSKiller. See also: Unable to connect to Apple ID after upgrade to ElCapitan 10.11.5 I have the Macbook Air 11 "1.4 Ghz i5 with 4 GB 1600 MHz DDR3 (early 2014) I can't connect to the Apple ID (iCloud, Appstore...) after upgrade in ElCapitan 10.11.5 About 3 weeks ago I improve my OS in ElCapitan as there was a signal of the Appstore upgrade. The download process and the installation was successful, but stuck on 'prepare your mac' session. It took about 2 hours, with cursor processing... Then I closed (push the power button on the keyboard) and turn. My Mac can work and in "about this Mac" already made it known that the OS is ElCapitan 10.11.5. But unfortunately, since then, I can't sign my Apple ID in the Mac (I use several apple 'iphone', 'ipad' products and my apple ID still works) I came to the nearby authorized Apple service, they don't have that one solution to re - install my Mac and I have to pay Maybe someone has a solution... Hi atiqurrakhman, From the information provided, it appears that you are unable to connect to your Apple ID for several services on your Mac from your update of OS X El Capitan 10.11.5. I know it's very important to have access to these services on your Mac, then I would be happy to provide assistance. Before you start, I recommend that you create a backup of your data using Time Machine. This website will provide more information: Use Time Machine to back up or restore your Mac - Apple Support Since the update seems stuck, it can not been installed properly on your system. The next step, I would recommend that you reinstall OS X from recovery using the steps here: How to reinstall OS X on your Mac - Apple Support If a recent Mac, you can use OS X Recovery to reinstall OS X. Once this process is complete, try to sign in with your Apple ID using multiple services to see if the problem has been resolved. Have a great rest of your day! McAfee Site Advisor does not work with Firefox 6.0.1 Different Firefox users have reported not being able to use McAfee Site Advisor with different versions of Firefox. I have the version update of Firefox (6.0.1) and have been able to use the Site Advisor until September 3, when I renewed my subscript Need Option to lock signal phone 3 g I have a model of the retail of bike E 2nd Gen LTE XT1521 (India). Menu mobile network offering telephone me three option i.e. prefer 4G, prefer 3G and prefer 2G. If I set to prefer the 3G phone can backup to the 2G network, causing loss of speed eve my vaio power up used desktop computer my habit of office power model PCG-2J3L all I can do at home to try where any reason why? I hear the speaker make a noise when I try to turn it on after firing to connect for a few seconds and re plugging in. I put away it in my closet for a little w replaced HD aspire AO756-2840 have disk recovery, need directions step by step what to do next recovery disk made when new. hard drive went out. put the new HD in. so im do not know what to crazy laptop has windows 8 on it. It would guide step by step to get out of here. any help would be appreciated. Thank you It runs pretending to install: each time restarting the computer up to date appears again; I look at all, I can find no cure for installation is complete on the web. all others so far seem to fill. KB 2530548 tried to install several times. shows thaSimilar Questions
Identification information Flavor: AUTH_UNIX (1)
Length: 32
Stamp: 0xc7065970
UID: 1000
GID: 1000
Identification information Flavor: AUTH_NULL (0)
Length: 0
TechNet - Windows Server
Thank you
Type of destination: VMware Workstation or other virtual machines to VMware
Product VMware: VMware Workstation 8.0.x
Information on the virtual machine:
Name: same as the source system, such as detected by the converter
Location for the virtual machine: \\localmachine\sharedfoldername
Username and password: my Windows 7 credentials, with full control over \\localmachine\sharedfoldername, the action and the underlying folder.
-Connection to the share through Windows Explorer works fine; It is possible to write to the share
[2011-01-14 12:33:10.086 'P2V' 4788 info] [, 0] SMB Manager: connection error for share [\\10.101.0.171\IPC$]: 1792
[2011-01-14 12:33:10.086 'P2V' 4788 info] [ClientConnection, 119] Renounce the attempt to connect to IPC$ on 10.101.0.171
[2011-01-14 'P2V' 4788 error 12:33:10.086] [task, 295] Task failed: P2VError REMOTE_UFA_FIREWALLED (10.101.0.171)
[2011-01-14 12:33:10.086 'P2V' 4788 verbose] [task, 339] The transition of InProgress asked congestive
[2011-01-14 12:33:10.086 'P2V' 4788 verbose] [task, 388] Successful passage
You can check problems caused by malware.
Please scan with all programs, because each program detects a different malicious program.
All of these programs have free versions.
http://www.Malwarebytes.org/MBAM.php
http://www.bleepingcomputer.com/download/adwcleaner/
http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
http://www.SUPERAntiSpyware.com/
http://www.Microsoft.com/security/scanner/en-us/default.aspx
http://Windows.Microsoft.com/en-us/Windows/using-Defender
http://www.safer-networking.org/en/index.html
http://www.Kaspersky.com/security-scan
http://support.Kaspersky.com/5350?El=88446Reinstall OS X from recovery
Maybe you are looking for