Unable to connect to the bridged casting of Chrome with WRT1900ac

Similar Questions

• My cloud of Adobe installer is unable to connect to the animated. No problems with internet... Help, please

  My cloud of Adobe installer is unable to connect to the animated. No problems with internet... Help, please

  Hello

  Thank you for using https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html > and all the steps in "troubleshooting connectivity issues.

  If necessary, and for any other question, click on through http://helpx.adobe.com/contact.html and so "open" Please use the chat, I to can I part had the best experiences. An employee of Adobe Preran I quote: the chat button is enabled as soon as there is an available to help agent.

  Hans-Günter

• "Unable to connect to the printer. Operation failed with error 0 x 00000866", setting up a network printer

  Title of the Moose: error 0 x 00000866

  I have a laptop with windows 7 Professional.

  When I try to install a network printer I always get the message "cannot connect to the printer. Operation failed with error 0 x 00000866.

  What can I do to fix this

  Hi ETPM.

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start troubleshooting printer and check.

  Check out the link:

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Note: You can read this article and try to proceed as for Windows 7 also.

  Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow the steps in the link mentioned above carefully. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/windows7Back-up-the-registry

  Method 3:

  If the fix above is unable to get the printer working on your client machine to vista, so I suggest to follow the steps mentioned by Afzal Taher as of Friday, December 18, 2009 02:00.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/954c4b9d-2F4C-4b1b-8fb6-49204ed96dfc

  Also check out the link:

  Install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the bridge of Sony for Mac.

  Hello

  I have a Xperia Z1 and I can't seem to connect to my mac to transfer files.

  The Xperia is on the latest version of 14.1.G.1.534

  The app I have is 3.5 (5303)

  I tried to unlock the phone before connection etc etc, but not luck.

  He presents himself as load so it looks as if it is plugged on the mac end.

  Any ideas?

  See you soon

  Neil

  Hi Redfern,

  I'm sorry that you can't connect your phone via the bridge. You get an error or nothing happens at all?

  You can try to change the USB cable and a USB port.

  Best regards

  David

• Unable to connect to the internet and have problems with the help of program network Toshiba

  Original title: I can't go on the internet?

  I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.

  Hi Alice,.

   

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You are unable to connect to internet and unable to use a Toshiba network program.

  1. what browser do you use?

  2 are you able to open other sites?

  3. Once you get a white page?

  4. do you get error messages when you try to open the site to the Bank?

  5 did you do changes on the computer before the show?

  6. who is the program of Toshiba network you're talking about?

  To work the issue with cannot connect to the internet:

  Method 1:

  See the site:

  The problems of Internet connection

  http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-Internet-connection-problems

  Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.

  To work the issue with Toshiba program:

  Method 2:

   

  Reinstall the boot program:

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Step 2: Uninstall the program

   

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 3: Install the program

   

  If the problem persists, then you try to get help on the Toshiba forums site:

  http://forums.Toshiba.com/

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

   

   

• Computer with Vista unable to connect to the internet through two computers with Windows 7.

  Dear engineers,

  In our House, we have two new computers Windows 7 connect to Wired internet access.  Our friend came in hoping to play some MMO games with us on our connection (it has windows vista).  When we hung everything upward, by linking to our modem, his computer was visible on my husbands computer, but was visible on mine as a media device.  He could see the two computers, but could not get an internet connection and no viable ping.  We checked the network map and he showed my computer with one? related to my husband then connected to the internet.  Inside, there was an announcement indicating that the following devices are not displayed in the network map.  under of course was listed both our friends media device and the computer device.  I searched Control Panel and gave access to anyone on the login to my husbands system as long as me.  What happens if nothing else can I try to have its system you can connect to our internet?

  Thank you for your attention,

  Cerisea

  Hello

  If a computer is not properly visible it generally means that sharing is not set correctly to match your system.

  You must also set your computers with the computer account of the friend as a user on your computer.

  Everyone does not mean everyone wishing to connect.

  If the accounts are presented only for John, Jill and Jack, setting in the folder with all permissions saves the effort of definition permission separately for John, Jill and Jack.

  Everyone isn't everyone group, only John, Jill and Jack.

  In general.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Unable to connect to the local intranet site now with 40 Firefox on OS 10.10.4, what has changed?

  We have a local intranet site and I get in this very well, but go to click on a link that goes to another internal site for our list of phone and it does not ask for my credentials get into the page, it is just straight up with a 401 error, as I entered the wrong credentials. Things were fine with 39.0.3 and I have since then returned to her. Using Firefox 40 on Windows 7, he asked for credentials. I was wondering if there is some sort of bug in the OS X version?

  I have not registered and not connected to other windows or tabs already passwords.

  Something has changed in Firefox 40, but don't know what. I watched the news of the changes, but haven't seen anything coming out that may have caused this.

  If you control the environment, then you could try to operate by affecting network.auth.allow - subresource-auth 2 as proposed in the article.
  I know too little about the question of why it would work in a windows environment, but not on os x - it's a bit confusing...

• Unable to connect to the site Web SSL VPN with firewall zone configured

  I recently updated my 2911 company and set up a firewall area.  This is my first experience with this and I used Cisco Configuration Professional to build the configuration of the firewall first and then edited the names to make it readable by humans.  The only problem I can't solve is to learn site Web SSL VPN from outside.  I can navigate the website and connect without problem from the inside, and even if it was useful to verify that the Routing and the site work properly it is really not what I.  I don't get anything on the syslog for drops because of the firewall server, or for any other reason but packet capture show that no response is received when you try to navigate to the outside Web site.  I am currently using a customer VPN IPSEC solution until I can get this to work and have no problem with it.  I have attached a sanitized with the included relevant lines configuration (deleted ~ 400 lines including logging, many inspections on the movement of the area to the area and the ipsec vpn, which I already mentioned).  I searched anything about this problem and no one has no problem connecting to their Web site, just to get other features to work correctly.  All thoughts are welcome.

  See the security box

  area to area

  Members of Interfaces:

  GigabitEthernet0/0.15

  GigabitEthernet0/0.30

  GigabitEthernet0/0.35

  GigabitEthernet0/0.45

  area outside zone

  Members of Interfaces:

  GigabitEthernet0/1

  sslvpn area area

  Members of Interfaces:

  Virtual-Template1

  SSLVPN-VIF0

  I tried to change the composition of the area on the interface virtual-Template1 to the outside the area nothing helps.

  See the pair area security

  Name of the pair area SSLVPN - AUX-in

  Source-Zone sslvpn-area-zone of Destination in the area

  Service-SSLVPN-AUX-IN-POLICY

  Name of the pair area IN SSLVPN

  Source-Zone in the Destination zone sslvpn-zone

  service-policy IN SSLVPN-POLICY

  Name of the pair area SELF SSLVPN

  Source-Zone sslvpn-area free-zone Destination schedule

  Service-SELF-to-SSLVPN-POLICY

  Zone-pair name IN-> AUTO

  Source-Zone in the Destination zone auto

  Service-IN-to-SELF-POLICY policy

  Name of the pair IN-> IN box

  In the Destination area source-Zone in the area

  service-policy IN IN-POLICY

  Zone-pair name SELF-> OUT

  Source-Zone auto zone of Destination outside the area

  Service-SELF-AUX-OUT-POLICY

  Name of the pair OUT zone-> AUTO

  Source-Zone out-area Destination-area auto

  Service-OUT-to-SELF-POLICY

  Zone-pair name IN-> OUT

  Source-Zone in the Destination area outside zone

  service-strategy ALLOW-ALL

  The pair OUT zone name-> IN

  Source-out-zone-time zone time Zone of Destination in the area

  Service-OUT-to-IN-POLICY

  Name of the pair area SSLVPN-to-SELF

  Source-Zone-Zone of sslvpn-area auto

  Service-SSLVPN-FOR-SELF-POLICY

  I also tried to add a pair of area for the outside zone sslvpn-zone passing all traffic and it doesn't change anything.

  The area of networks

  G0/0.15

  172.16.0.1 26

  G0/0.30

  172.16.0.65/26

  G0/0.35

  172.16.0.129/25

  G0/0.45

  172.18.0.1 28

  Pool of SSL VPN

  172.20.0.1 - 172.20.0.14

  Latest Version of IOS:

  Cisco IOS software, software C2900 (C2900-UNIVERSALK9-M), Version 15.0 (1) M10, RELEASE SOFTWARE (fc1)

  Glad works now. Weird question, no doubt.

  I guess that on the deployment guide said that the firewall will not support inspection of TCP to the free zone, however, class nested maps are used to accomplish this, to be completely honest, I think it's a mess and the best thing to do is action past to auto for the protocols that you want and then drop the rest.

  Let us know if you have any other problems.

  Mike

• Unable to connect to the domain of Tuxedo

  Hello

  I sent a cloned cartridge of peoplesoft with the list of domains. These areas have created the PS_AppServer Agents that don't collect data because of this message "unable to connect to the domain of smoking: ELMPRD5 ' with message id:"PS_ASRV_212 ".

  I checked the path of smoking and also set the symbolic link, but still its not to collect the data.

  Could someone help me on this issue as soon as POSSIBLE.

  Kind regards

  Shiva G

  The most likely cause of this problem is discussed in the 45907 Knowledge Base article, which relates to additional measures to be taken if the start agents PS_AppServer Manager Agent is running as non-root.

  Kind regards

  Brian Wheeldon

• I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

  I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

  You have tried: If you can not connect to the iTunes Store - Apple Support ?

  And I tried to do a soft-reset/reboot the phone?

• Unable to connect to the App Store and auto delete app

  Hi, I never update my ipad because I never, and I do not have the space for it anyway. Now and then I get the message saying ipad needs space for the update, press ok to allow deletion, or something in that sense. Theres two options cancel or ok. Today I accidentally pressed ok. He deleted my largest app and now I am having problems with the App Store. I can open it and see the recommended page. I think I can upload them as well, but when I use the search bar, it says unable to connect to the App Store. I don't know what to do and how to cancel.

  First of all, make sure that you don't have enough free space before trying to re-download the application. Once you know that you have enough space, try these two ways to get to the app.

  Click on the tab purchased on the App Store and see if the application appears in a search here or just trying to slide through until you see the app and then download it from there.

  If this does not work, do a Google search for the app. It should appear in the search. Tap on the app in the Google search and who should open the description window app on the App Store with the download next to the app icon.

• Unable to connect using the current password

  Using the current password which only had 6 characters - have now changed to 8 hope if this helps solve the problem.
  Have you noticed too there was an update of Mozilla on my laptop the day before that this problem then this could be the reason?

  Unable to connect using the current password

  It is far from a complete problem description.
  Please explain in detail

  • what you were doing
  • That's happened

  Using the current password which only had 6 characters

  6 characters is a very weak password. Consider using a password manager to generate longer and more complex passwords and to remember these passwords.

• Unable to connect to the internet update version

  I've updated to the latest version 35, but since then, the browser seems unable to connect to the internet. I thought it was my firewall that was blocking the program. I did what was suggested to work around this problem, that is, to remove my firewall and then add it again. But it does not solve the problem. There is nothing wrong with my internet, how am I be able to connect to internet by using IE or Chrome. And I was able to connect to the internet in the previous version of Firefox. Unfortunately, the new updated version is not allow me to. Have no solution?

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Unable to connect to the website of 'http', steam and App Store

  I use a Macbook Pro 13 inch, mid-2012 with OSX Yosemite 10.10.5. I had a problem with my network which I cannot connect to the 'http' site in Google Chrome or Safari. It shows ' site is not reachable, refused to sign, ERR_CONNECTION_REFUSED '. In addition, I can not connect to Steam and it shows 'code error - 102, unable to connect to the server. "Server may be offline or you cannot be connected to the internet". I can access the App Store, but most of the app doesn't load the image, and it seems weird that I cannot install or update applications from the App Store. It is said "we could complete the purchase. Cannot connect to the server'. Finally, I can connect to the Web site "https" as google.com, facebook.com, youtube.com, and apple.com. I don't know what I was doing before that happens because I'm not all of the firewall settings or IP network since I bought it. I don't even no matter what antivirus installed on my macbook. I do not think that the problem of my wifi because it works fine on my other devices. I try to fix but still have no luck.

  Here what I was trying to fix my problem:

  1. I try to restart the computer, then reconnect to my wifi - nothing fixed

  2. I have try to change the DNS 8.8.8.8 and 8.8.4.4 - still not fixed, worse still, unable to connect all Web sites

  3. I try to delete the Library/Preferences/SystemConfiguration folder and restart the computer - nothing has changed

  4. I try to start safe mode and it works very well and when I reboot to normal, it still happens

  5. I try to remove and re-add the Chrome in the firewall settings to allow incoming connections - nothing fixed

  6. I try to delete all the data navigation and cookies in Chrome and Safari - still not fixed

  7. I try to plug in the ethernet cable, as a first step, it works very well. Then, when I disconnected and reconnected again for the second time, and then he had the same problems.

  What I saw here, I check that iTunes had recently many updates with the same version of iTunes 12.4.1 since June 4, 2016 (1 time), June 5, 2016 (1 time), June 6, 2016 (2 times), June 7, 2016 (7 times), June 8, 2016 (2 times), June 10, 2016 (9 times), June 11, 2016 (1 time) and June 12, 2016 (1 hour). I don't know if this is normal or not because he had to download and installed about 24 times with the same versions! It is possible that iTunes is the cause of this problem? Any help and suggestions that can solve my problem? Thanks in advance!

  Is your date and time is set correctly? 5 minutes from the perfect?