Unable to connect to the host server: a connection attempt failed because

Similar Questions

• The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

  The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  Hello

  It seems that the blackberry is not more.

  Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

• Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)

  Hi all

  I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)

  Can anyone help me please with this.

  Thank you

  Zia

  What is the local firewall on your computer?

• Error code: 800ccc0e and the message "Unable to connect to the host server", when you set up Windows Mail to receive discussion group messages.

  I recently signed up for Windows Mail, Windows Vista Help. I have configured my Gmail OK account, but when I click TOOLS then Newsgroups I get the following error: unable to connect to the host server. When I click on show details, he said: Microsoft Community Server: msnews.microsoft.com Protocol: NNTP Port: 119 secure (SSL): 0 Code: 800ccc0e

  msnews. Microsoft.com has not existed for about three years now. MS close their news servers. You can still access newsgroups, but you will have to do with one another as eternal September or AIOE news server.
   
   

• Unable to connect the host server alone on the bridge or a NAT server network

  I have configuered 5 comments OS (windows server 2003) on Vmware workstation (on a single host). Among them three servers are on the network host and two others respectively is on the bridge network and NAT. All the guest OS is on a local network (i.e. team).

  I can connect on the bridge or a NAT server to the internet. But I can't ping on the server (on the bridge or NAT) servers (on the single host network). IP address assigned to the host only network is the subnet of class A. And on the bridge or a NAT server is dynamically assigned by the DHCP service.

  Can someone help me?

  whether you are able to connect all the virtual machines, you have 2 options:

  -connect all your virtual machines on the host network

  -If you really need to keep your 2 VMs on the bridge and NAT, you must assign the 2 network cards to those virtual machines. One of the cards connected in Bridged/NAT and the other network card NETWORK connected to host only.

  concerning

  Jose

• Embed videos from the host server?

  How to embed a video on a Muse page located on my own host? I have some videos that are on a host server that I want to play on a page of Muse. I don't want to download on Youtube or Vimeo.

  You can always add some Widget video player that connects the videos you have stored on your FTP.

  Muse - themes.com has a couple of people.

• Unable to communicate with the host computer using the network University compactRIO

  Please move this topic to the appropriate section if it is not the right section. I can't locate a Council called the compactRIO. Thank you very much.

  I encounter this problem of network communication with my cRIO 9067. the linklocal or USB connection is fine but not static IP connection on the network. I contacted the it Department to assign me a static IP address for my MAC address of cRIO. In our University, they block only unknown MAC address access and the cRIO is in the whitelist. Here are the details

  cRIO attributed to IP address: 129.12.54.xxx, tried both netmask 255.255.255.0 and 255.255.0.0, no luck

  the host computer's static IP address: 129.12.50.xxx, subnet mask 255.255.255.0 (information of cmd - ipconfig)

  First question would be: they are on the same subnet? I need to make sure that even if scientists confirm that.

  Secondly, I followed https://www.ni.com/getting-started/set-up-hardware/compactrio/static-ip by using the IP address assigned, but not luck. I've noticed that I configure same address type cRIO static IPv4 using the USB connection or for local link mode, she went in DHCP mode or Local link once I unplug the USB and restart it.

  Whenever I restart MAX, connect the cRIO and my host to Ethernet jack on the wall, it shows the DHCP mode or link with assigned Local 129.12.54.xxx IP and the subnet mask 255.255.255.248. In addition, I am not able to change it in a drop-down list even after removing it and restart MAX indicated by tutorials OR.

  If you need more information, please let me know.

  Help, please!

  Jinyu

  Dear Mikko,

  I am pleased to tell you that the problem has been resolved. The cRIO works very well.

  The reason why it does not work is in first place because they are in the other subnet. For my school, my host is 12x.1x.54.130 and the IP assigned to my cRIO is 12x.1x.54.131. the subnet mask is 255.255.255.0 number marked in red must be the same for the cRIO is connected correctly.

  Kind regards

  Jinyu

• Corrected name of the host server

  I got the notice that ' the host 'SMTP is not found. " Apparently some time back I inadvertently changed the name of the server, selecting from a list and not knowing the consequences. I sent 4 months never email Windows because of this and can not use the Windows mail to in another program.  How can I know a) my real name of the server and b) go back to where I need to solve this problem.

  I think I also need to know the correct account, Protocol, Port etc.  How and where can I find out what they are supposed to be so that I can confirm that they are entered appropriately in order for Windows Mail work. I'm sick think CVS job several that did not get through without my knowledge.

  Please post the error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

  You know the name of your server? What is your address after the sign @? Who should you pay every month to access the Internet? Have you asked their tech support for account settings correctly?

  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish Bruce Hagen MS - MVP [Mail]

• Hard drives local to the host server, 10 k rpm or 15 k?

  Looking at the addition of a couple of hosts "workaholic" into our environment vsphere for some SQL database applications. Is there an advantage to the esx server hosts on 15 k disks running over 10 k?

  We use a mixture of San fibre channel/iscsi to all data warehouses, so this isn't for the vm comments just for the esx install.

  Just curious to know what you guys are running, and if you see performance gains overall with faster disks to the host install.

  Thank you

  Kevin

  If the disks are only for the accommodation of the operating system, there is not need to spend money for fast readers. You can even run the hypervisor of a patient USB or SD card.

  André

  Forum upgrade notice:

  VMware will be upgrading systems VMware communities between December 10-12, 2010. During this time, the system will be placed in READ ONLY mode.

• Contact form works on the host server, but not the Web Page

  I created my first site with CS6. I decided to throw a contact form, so I went to my host providesr, Network Solutions, which has a Wizard for a contact form. I used the wizard to create a contact form. When I access the page on the Host Site for Network Solutions, the contact page is formatted with colors, I chose and it works correctly. Declined, I hit Submit, the message is sent to the approprate address.

  I used the GET function to bring the new page of my local site and then synced it with the real Web site. The formatting, I've created on the server host does not appear, but the Contact form is on the Web site I created in all white. Fill the fields of the form, but when I click on the botton to SUBMIT, a dialog box appears saying it does not find the Web page.,.

  Does anyone know what error I do?

  Thank you

  Put the complete url in the field of action.

  "action ="http://yourWebAddress.com/cgi-bin/FormMail.contact.pl"

  Then see what happens

• The HP dv7-6135dx recovery attempt failed

  I have a HP dv7-6135dx post-warranty hp specs say he had windows 7 Home Edition premium 64-bit, the hard drive went bad, so I replaced the 750 GB drive with a 500 GB drive, they are the two advanced Format drives but not the same manufacturer... anyway, I ordered a new recovery disc for my hp laptop and down them... It goes through the process of 3 hours and at the end he comes up with the message that says: recovery failed. And then it gives me three options: save the newspaper, details and retry. If you press details, it shows you a CTOERROR. FLG file...

  The said file p2pp burnboot verification failed...

  He also says...

  (registrydevicecheck)
  result = failure.

  Device failed #0
  Description: unknown device
  PnPDeviceId; usb\vid_0000 & pid_0000\6 & 283b6af9 & 0 & 2
  Code (43) (43).

  And at the bottom it says...

  Sysprep_succeeded. There is no tag...

  Bbvlast.cmd: (20 x) CTOERROR.flg is detected at the end of the process of PBO

  I really need to get this figured out...

  No you don't need all. For example in the category Chipset, you need to Installation of the Intel Chipset and Intel Management Engine. But there are 3 different USB drivers only one matches your hardware. Also, you will not need driver Intel Graphics. The AMD graphics driver should include the two Intel & AMD for switchable graphics. Under network drivers you have Realtek for the wired lan port of your laptop, don't know not what wireless card you only 1 driver will match.

• 5s iPhone cannot send emails when it is connected to the host server Exchange 2013

  We moved just email providers of in home (Exchange knock-off called 'Kerio' on a server) to 2013 exchanged hosted Microsoft. My iPhone 4 (7.x) is able to connect on the new e-mail server and send and receive e-mails. I tried to connect my 5s (8,0) and a 5 c (7.1.2) but I am only able to receive emails, do not send. 5 5 c/s have been setup using 'Exchange' in the e-mail application. Any advice?

  Hello

  See the link below for this problem.

  1. apple discussion click here

  2. link to the configuration page click here

• Unable to connect to Safari because it lacks server safari. where is he past?

  Why all of a sudden not have changed anything do the following message is displayed when you connect to my browser Safari on my Mac. My other devices are not affected.

  "SAFARI CAN'T CONNECT BECAUSE IT CAN'T FIND THE SERVER OF SAFARI.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 deselect if selected Proxies.

  System Preferences > network > advanced > proxies tab

  Unlock the lock if you have to.

  Under "Select the Protocol", uncheck all box if marked cheque.

  Click 'OK' and then 'apply '.

  For more tips:

  https://support.Apple.com/en-us/HT203244

  https://discussions.Apple.com/thread/4120215?TSTART=0

• View customer Horizon | Unable to login via the Security Server

  Hello people,

  We strive to deploy VMware View 5.3. Everything is complete we are able to access desktop of customer view through connection to the server. But when we try to connect to the desktop via security server, authentication of the user position get us the attached error.

  Can someone please help me to understand and resolve the error?

  Thank you!

  Hari.

  Thank you for your response. Issues was DNS resolution external URL referred to the client device. We decided. Thank you.

  Hari.

• HP Esx4i serial numbers for the host server

  Hello

  I have download the version of Hp of VMWare Esx4i. Where can I get the serial numbers for this - HP or VMWare? He complains that the server will expire after 60 days.

  Thank you

  Yes.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru