Similar Questions

• Unable to connect to wireless internet after Windows Vista update on 16/09/10

  Since I've updated windows I cannot access my wireless internet connection, however, I am still able to connect via the LAN port.

  If I check my ipconfig it says under the "media disconnected" wireless network connection  I tried to get my IP address into my settings because they seem to have disappeared, but I can't always wireless.  I ran all Windows diagnostic tools, but all say that the internet connection is fine (due to it being connected by the LAN port).

  I also tried to fix it by other solutions on this forum, that is

  • Open Set Up a Wireless Router or Access Point by clicking theStart button, clickingControl Panel, clicking network and Internet, and then clicknetwork and sharing Center. In the left pane, clickset up a connection or network, and thenset up an access point or wireless router.

  The result of the message is ' Windows has detected network hardware, but it cannot automatically configure "and when I try to manually configure the server requires a user name and password which I don't have.

  Please could shed you some light on this case for me?

  Thank you very much

  Hello

  I tried everything above without result.  However, I managed to reinstall my wireless router software after having repaired my DVD driver software.  I restarted my computer and Wireless does not work.  Reinstalled the software new and restarted the computer, and then after a short period of time the computer connected to wireless internet!  Not know not why the remedy has been delayed or why it did not work after the first attempt, but it connects wireless now - what I know is that this problem occurred after an update of Windows, it's a shame that Microsoft failed to address this problem as it was their update it as many other people have also claimed.

  A big thank you to everyone who offered advice.

• Unable to connect to the Update Center

  I just finished my fifth unsuccessful attempt to install jdeveloper 11.1.1.4 on a laptop from scratch. I already had a 11.1.1.3 installation and work of the need to upgrade to 11.1.1.4 to align with the SOA server I have deploy across the network.
  
  I removed 11.1.1.3 and 11.1.1.4 facilities (via windows install/uninstall program, and then manually deleting directories that they were in), and then try to reinstall several times, remove after each unsuccessful attempt).
  
  My problem is when I try to install the extension of SOA. After the initial installation of the software in JDeveloper, I'm going to "Help"-> "check for updates... ».
  Rather than see a list of locations to update I get a popup on top of the Update Center popup, which claims that it is:
  
  Unable to connect to the internet to check updates.
  
  If you are behind a firewall or use a proxy to access web pages, check your settings of proxy below and click OK to try again.
  
  Normally, I use a url of proxy auto to manage my access to the proxy for that so I'm VPN would be in my company or not, Firefox handles my access network correctly. Because it is not an option in the context menu, I found a proxy host and tried to use it while I was VPN in. That has not helped - I tested the proxy of the popup and it failed. I Redid the installation 2 - 3 times while only had in VPN, then abandoned.
  
  So I uninstalled everything, disconnected VPN and did another fresh install. There is also no in the same way (Nothing in the center of update list and I got the same error popup).
  
  It's a mystery all that JDeveloper is really doing. It makes me crazy when the software works not seamlessly like this. I don't see what it is really doing, and the error message is useless or worse. (Why is she even suggesting that I provided a proxy when I'm straight on the internet. Why didn't he just tell me what he's trying to do, and, if I can fix it). I have a fine Internet connection that works for everything else.
  
  I know JDeveloper is still caching configuration information (my two projects appear in the list of applications), and so I guess that's also implementing caching some old login information that it does not show me. But I find no visible which erase and start over.
  
  Anyone know how to get JDeveloper to just try to connect directly to find update centers after that he cooked the old way to do it in a file somewhere hidden?
  
  Thank you

  Hello
  If JDeveloper is installed successfully, then you are good to go. Come to the addition of Extensions for SOA, BPM etc, you can do this either online (directly and update the Oracle site) or offline also. Average offline, first download the corresponding ZIP extension files for your version of 11.4 JDev as a composite model soa, bpm, Publisher etc. Then click on help-> Check For Update-> ignores errors or the pop-up windows and cancel-> them on the screen main down check the box named "install local file". Here browse and select a zip file at a time and move forward.

  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/156082.XML#Oracle.SCA.Modeler (Oracle SOA Composite Editor-> 11.4)
  http://www.Oracle.com/ocom/groups/public/@OTN/documents/WEBCONTENT/156082.XML#Oracle.BPM.fusion.Studio (Oracle BPM Studio-> 11.4)

  For SOA/BPM, simply just above 2 extensions.

  Thank you
  Ravi Jegga

• As he tried to update 8.0.1 firefox is unable to connect to the update server.

  After getting the prompt to update 8.0.1, Firefox cannot connect to the update server. I've never had a problem connecting to the previous updates in the past. I'm running OX 10.6 and the currently installed version of firefox is 7.0.1.

  try to install Firefox 8 on top of Firefox 7, or

  The profile is a file that store your personal information in a safe place

  • https://support.Mozilla.com/en-us/KB/profiles

  here explain how to save the profile

  • https://support.Mozilla.com/en-us/KB/backing%20up%20your%20information

  here explain how to restore it
  

  • https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

• Unable to connect to wireless internet after formatting the system.

  Original title: Mr

  Hi, please my dell Inspiron gives me a serious problem to connect to any wireless router, I can only use moderm to brose, I can't connect to any wireless network, this happened to me after that I have format the system but all other things work.

  Hello

  Thanks for posting your query on Microsoft Community forum.

  As you mentioned after formatting the system, you cannot connect to a wireless router, I recommend updating the firmware on your router and updates your wireless network adapter drivers, as there might be a chance that the wireless drivers are deleted.

  The majority of connection inside Windows 7 problems have been resolved by installing the latest driver for the wireless card with obtained from the manufacturer. Download and install the Windows 7 compatible drivers and check whether the problem is resolved.

  You can refer to the link provided below to update the drivers from the manufacturer's website.

  DELL drivers.

  If the problem persists, I suggest you try the below mentioned methods and see if it helps you to solve the problem.

  Method 1:

  First of all, I suggest you run Windows built-in network troubleshooting to get the problem automatically detected and corrected.

  See the article below to run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7#section_2

  
  

  Method 2:

  This problem can also be bound to the adapter, reset, update driver, disabling, re-activating, uninstall and reinstall network adapter can help.

  Follow the steps in the following article to troubleshoot network adapter.

  How can I troubleshoot network adapter?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  See also: Wired and wireless network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Unable to connect to my Skype after installing updates.

  Original title: access Skype.

  I can't connect to my Skype from this morning. It worked yesterday, Windows tells me he's going to try and solve the problem and let me know. How long it will take and how will that they informed me that it is fixed. Skype stopped after that Windows install updates on my PC yesterday. Not a happy Bunny!

  Hi valsturrock,

  Update that you installed before the problem?

  To view installed updates, you can follow these steps.

  a. Click Start, click all programs and then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  You try to run the system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Hope the helps of information.
  Please post back and we do know.

• Unable to connect via wifi Web after that windows update 8.1

  Laptop HP Pavilion 15 pc 15 n032sa-update to windows 8.1 but now unable to connect to Internet with wifi I have to use the yellow cable.

  Hello

  Please try

  (a) go into Device Manager and uninstall the network card (NIC) wireless.

  (b) restart the machine.

  (c) wait 10 mins.

  Or click on the following link and click Search now

  Kind regards.

• Unable to connect to the updates of Windows

  I am unable to connect to Windows update.  I use VISTA and receive the following error message:

  • Updated Windows cannot currently check the updates because the service is not running.  You may have to restart your computer.

  I rebooted several times without success.  Also, I update is enabled, so I'm at a loss to know what to do.

  Your output indicates a problem with the BITS service.

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and menu file - import and bits_vista_32.reg of importation.

   

  https://SkyDrive.live.com/redir?RESID=E2F0CE17A268A4FA! 171

   
  It should work on 64 or 32-bit vista.

  Reset.

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  SC config BITS start = demand
  SC start BITS
   
   

• No Internet after installing Windows updates

  Original title: can not access the Internet using the Chrome or Explorer once I have download & install the latest critical updates for Windows

  I have Windows 8 on my laptop.  I tried twice to leave my automatic updates (critical) download & install - once at the end of October and the second time a couple of days.  Once the download is finished and I have install (including my computer restarts), everything seems fine - but I can't access the internet with Internet Explorer or Chrome (which I prefer).  I had to run every time the system restore in order to retrieve my access.  Any ideas for why I can't update?

  Hi Patty,.

  Thanks for your reply.

  I appreciate your efforts to try the methods provided.

  I suggest you to update the network adapter and the drivers from the Chipset and try to install the updates of Windows and check if the problem persists. If the problem persists then try to run the troubleshooters.

  See the link below to install the drivers: (make sure you install the drivers for your computer model, such as the model number, you have provided is not specific, because there are several models under laptop HP Pavilion G6)

  http://h22207.www2.HP.com/us-en

  Hope this will solve the problem, if not let us know with the updated status and we will be happy to help you further.

• Unable to connect to public WiFi after installing iOS 9.3.1

  Every since the installation of iOS 9.3 and 9.3.1 is impossible to connect to a public WiFi, including Starbucks/Google and Xfinity.  I have no problem to connect to my home WiFI and WiFi in the public library. I was hopeful that installation 9.3.1 could solve this problem, but alas no, I have this problem with both my iPhone and my iPad Air 2 6 more.

  The difficulties of connection on multiple devices would tell me that the network is probably the problem.  It is very unlikely for an air of iPad 2 and iPhone 6 s to have the same problem (even with an iOS update), and you can always connect to your House and some other networks.

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Unable to connect to the internet after the removal of important processes in the task bar

  I am not very tech-savvy then let me explain.

  I have a laptop Lenovo I recently bought in August 2014.  A friend suggested that I have download the free application "Open Office" in line, so I could open a school power point.  Open Office gave me a handful of viruses, which I managed to delete, then having served the system well, panic I accidentally opened the Task Manager and deleted a bunch of processes that are running.

  Now, I find that, although I am connected to WiFi, I can't open Internet.  I click on Firefox, but it shows that I am unable to connect to the Internet.

  I have Windows 8; an easy way I can solve this problem?

  Thank you.

  Original title: I accidentally turned off the program that allows my computer to connect to the Internet

  Hi Tunasushiroll,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  The problem can occur for various reasons, including incorrect TCP/IP settings configured, firewalls third of anti-virus programs blocking the connection, or due to bad the advanced sharing settings. So, I would suggest trying the following methods and check if you system is able to detect the wireless network.

  Method 1:

  Run the troubleshooter network first, and then test your Internet connection.

  Open the Network Troubleshooter by hitting on any fly in the Dashboard screen, quilting Search(or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), entering the network troubleshooterin the search box, type, or by clicking settingsand then by typing or clicking on identify and fix network problems.

  If the problem persists, try the following method.

  Method 2:

  Second of all, please check if the WLAN service is started and set to automatic. If it is stopped, then I suggest you to start the service and set it to automatic.

  1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
  2. Select the Autoconfiguration WLAN service in the list and double-click it.
  3. Change the startup to Automatic type, then click Start to start the service.
  4. Click apply and then click OK.
  5. Restart the computer and verify if the network is detected. If this is not the case, go to method 3.

  Method 3:

  Reset the DNS and TCP/IP settings.

  1. Press the Windows key + X, click prompt (Admin).
  2. Please enter the following commands and press ENTER after each one.

     netsh int ip reset resetlog.txt
     netsh winsock reset
     ipconfig/registerdns
     ipconfig/flushdns
     ipconfig/release

  3. Restart the computer to check the issue.

  Check if the system is able to detect the network. If this is not the case, go to method 4.

  Method 4:
  Temporarily disable the security software (if any), and check if it helps.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Additional information:

  Windows wireless and wired network connection problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Satellite Pro A10 - WXP re-installed and unable to connect to the internet

  Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
  I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
  1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
  They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

  My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

  Would appreciate any help...
  Thank you

  Hello

  Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

  > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

  Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• After installing an update on Friday morning, I am unable to connect to the HTTP site

  I ran an update Thursday night and Friday morning that I was unable to connect to the internet. After a repair, it seems that I can connect to https and ftp sites, but I can't connect to non-secure http sites. I don't know if a setting has been changed or if there is another question. Thanks in advance for any help.

  original title: unable to connect to http sites

  I finished to restore on the eve of the update and everything works. I did it after trying the method 1 & 2 above. WinHTTP was not anywhere on the list of services and connections have been implemented according to the instructions. I hesitate to run updates until I know what caused the problem.
  The browser is IE.
  Here's the ID numbers updates which took place:
  KB2618451, KB2618444, KB2544893, KB2564958, KB2592799, KB2619339, KB2620712, KB2624667, KB2633171, KB2639417, KB2633952, KB2641690 AND KB890830.

• Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

  Original title: unable to connect to the internet

  Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

  Oh thanks for the help but I fix it myself. I just did a system restore to a month before