Unable to connect to the internet and have problems with the help of program network Toshiba
Original title: I can't go on the internet?
I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.
Please join Microsoft Community where you can find the necessary information on Microsoft products!
You are unable to connect to internet and unable to use a Toshiba network program.
1. what browser do you use?
2 are you able to open other sites?
3. Once you get a white page?
4. do you get error messages when you try to open the site to the Bank?
5 did you do changes on the computer before the show?
6. who is the program of Toshiba network you're talking about?
To work the issue with cannot connect to the internet:
See the site:
The problems of Internet connection
Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.
To work the issue with Toshiba program:
Reinstall the boot program:
Step 1: Clean boot
When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.
Check out the link:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.
Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).
Step 2: Uninstall the program
See the site:
Uninstall or change a program
Step 3: Install the program
If the problem persists, then you try to get help on the Toshiba forums site:
I hope this helps. If the problem persists, let know us and we would be happy to help you.
wireless networkOK so my comcast Internet got off because my husband was laid off anyway so now my computer connecting to the tired all wireless network as power ang unplugimg cable everything is hanging Strip tight ideas?
Hello1. are you trying to connect to the home or public network?
2. what version of Windows are you using?3. you receive an error message trying to connect to the network?
4. What is the brand and model of the computer?If you try to connect to the home network, contact the Internet service provider and make sure that the Internet service is activated.
If you try to connect to the public network, try the following methods.Method 1:
Wi - Fi and in Windows network connection issues.
Method 2: Temporarily disable the security software.
Disable the anti-virus software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks
My first post here so please excuse any misstep on my part. I bought this HP Deskjet 3050 a week ago and have since been war with it. I would be really grateful if someone could possibly give advice on how I can solve this problem.
I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem. I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer. If I disable the security, the printer connects very well.
I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings. The router broadcasts on 802. 11 g / N mixed mode.
I install the software provided on the CD for installation on a Windows XP SP3 System. I confirmed that the PC and the printer are connected to the network are the same.
The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010. The release notes indicate the improvement of networks, but do not develop beyond that. Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?
Finally, just a note that I am partially blind and using a screen on all systems reader. I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.
Thanks in advance for your help, I really enjoyed.
Have a nice day,
All the best for now and take care,
Hussein.It is not the fact that it is impossible, is the fact that this was not done, yet.
first of all, my apologies for the delay getting back to you. Poor health means that I had little time or want to do great thing on the side of the computer of htings.
In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved. There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.
To resolve this problem, I did the following:
1. disable all security for the network options, so it's just an open network.
2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
3. Locate the IP address of the printer. I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
5. under Advanced options, configure the network settings, including the password and the Security Protocol. Don't forget to enter the SSID of the network exactly as it is configured on the router.
6. apply settings, disconnect from the control panel of the printer.
7 log in the router configuration panel and re-apply the security options. Make sure they match these match those entered for the printer.
I hope it will be useful to others in the same position.
Thanks again for your time.
I have already scanned to the folder of network of digital repository on a printer HP 8500 wireless, connected to a wireless G home network. However, I recently bought a new superisolants wireless router and am no longer able to use the scan function. I now get an error message that says: unable to connect to \\Computer\Folder Make sure the remote computer is turned on. The printer on the wireless network and works very well except for scanning to the folder of the network of Direct deposit. Thank you.
I called HP tech support last night that had me add IP address of the printer to the McAfee Firewall as an approved connection. Digital archiving to the network folder scan function works now.
I use Word for Mac on my MacBook (version 10.11). I have problems setting the orientation of the text of the Hebrew version.
Where can I find the icon for the orientation of the text? (not like the alignment)
It doesn't look like Word for Mac has the RTL support. See the first response to this which Hebrew fonts program works well on a mac - to write Hebrew texts or insert the Hebrew into English documents? post for some alternatives.
I run a server for a game called freelancer who has been released by Microsoft in 2003. My problem is that, in recent years, when I tried to get the server working after doing a clean install of WinXP Pro and get the updates, the server hanging and not start working properly. After several installations with various combinations of what has been installed after the OS, I finally got the server works, but get this: the server runs only on Windows XP with NO updates. WHY?
I have a theory that I can't prove it on WinXP... When Freelancer was released in 2003, XP was new and she has no security features there now, and I think that one or more of the mess of updates with the server of DirectPlay 8 which is integral to the operation of the server. Of you Eggheads Microsoft must know what I mean... I don't know enough on XP to do more to make a guess, and it's my guess...
Thank you for allowing me to escape,
DirectPlay has been moved to support engineering and is an obsolete API. This was done mainly because of security problems and the fact that most of the features of DirectPlay is no longer relevant. TCP/IP is the ubiquitous network protocol and support for the head-to-head modem, serial port,
NetBIOS, IPX and other suppliers is no longer relevant. Native API for TCP/IP in Windows is WinSock, and the usefulness of the library is so limited.
There are technologies in Windows XP SP 2 or later version that provide server under protocols of discovery to manage the features of lobbying (P2P and PNRP), and many third-party solutions exist for matching. Future Microsoft technologies for this will be based on WinSock and not of DirectPlay.
Support in future versions of the operating system will be determined primarily by the problem of application compatibility and will continue to be available through the Platform SDK for those supporting legacy streaming of DirectPlay applications.
For reference: error messages when you try to connect to the game multiplayer matchmaking: http://support.microsoft.com/kb/829151/en-us
I have a new IMac et have now problems with periods and commas.
Since I live Scandinavia we use comma.
When I for example. want a shot of 1.5 Illustrator, InDesign and other programs want to write with the "period of '
This give me BIG problems, as when I write decimetre figures and like that
Can you help me?
I am creating an interactive website for a client developer. We are eager to build an interactive site where a potential buyer can see the rendering of the image of the kitchen and choose different finishes (floors, counters, backsplash ect.). I use the widget presentation stacked for interactivity. For example, the cabinets are all in a widget. The second widget contains the upper part of the counter. The third widget will contain the floors. All targets of widgets are stacked with various components of rendering and triggers are more towards the left to graphically create a kiosk. I have a question when I look in a preview of the browser. Sometimes the trigger buttons work and some times they do not have. They don't seem to be any rhyme or reason to it. I need help! Someone has an idea?
Is it possible that I could put all my layers on top of the original kitchen render and use States to reversal or clicking to give me the functionality I need?
You must understand that triggers and targets are different... the triggers can be inside the goals as long as they do not belong in other triggers
I'm building a site of basic database for my local community, and everything is fine until I try to add more script for the command buttons on the pages in the menu. The menu has 7 buttons that work, then on each of these pages are more than 6 buttons. The first page works fine but when I add the code to the following page to control its buttons access of undefined prop. error and continues to play through any chronology. It's the im code using control buttons on the pages in the menu. If someone could help that would be great.
Nothing particularly wrong with the code you show it, it is more likely a matter of trying to affect a bad code. If you can view the actual error message you get can narrow the problem... before that if you go in your publish the Flash settings section and select the option to enable debugging, the error message will have a bit more info in there.
If you can describe this scenario where you have other buttons on other pages as well as how these pages differ from each other, which can be useful as well. What are all the labels image linked to... the main timeline? Is - this code on the main timeline or in the pages?
I've been messing around with my Thunderbird data, so this problem is of my own making I think.
I deleted an e-mail account using my provider configuration area. It was an e-mail account that I had set up initially at his accession to this provider and contained only test messages etc and was therefore no other use.
I had implemented this e-mail in Thunderbird and after deleting the account with my ISP I then removed the account in Thunderbird. Everything seemed to be OK.
Now, to confuse the issues. I had already set up a list of folders under local folders for emails filtered into Thunderbird - I now moved their in my main account by click/drag and drop on the name of the account. Although it has taken a lot of time (and unexpectedly used a huge amount of bandwidth), the operation seemed at last to the end (even though it was really hard to determine until I finally found the activity monitor).
Now, to the point of this ad:
After all the above, I discovered that a false file was created under the Inbox of my main account, called "new % 20Folder = 0' that I read in the new folder-0. I don't know at what point in the above that this issue has appeared, but I * think * I must have dragged / dropped one of my folder moves on the Inbox instead of the account name field.
Now, dear readers, if you've got so far, most of my problem. I can not remove this folder when I try, I get the message
The current operation on the "new % 20folder-0"failed." The e-mail server for the account * answered the folder does not exist.
I tried a bunch of things, change the settings in its properties, etc, but I have no reason to delete.
Question is: How can I remove it?
I'd do it:
(a) check on the website of the the email provider to check if he had copied here and cope. Your mention of bandwidth suggests it is an IMAP-connected account.
(b) close Thunderbird, open their profile , and delete the offending file there. You need to browse your profile for a while understand its structure before doing anything rash.
In General, I discourage users to drag files just as you did. By all means, drag the content (even better, use to select, then right click and "copy to" or "move to"), but moving files is IMHO indefinite operation with unpredictable results. I've heard talk of users move a folder from one account to another and find that it always associated with (i.e. "belongs to") the original account.
Original title: driver installation problems
I was running a computer laptop gateway t-series that has windows vista installed. I uninstalled vista and installed xp pro on a disc borrowed from a friend.i did not know at the time where the drivers must be installed separately. Not only that, reinstall drive was from dell. my friend has a dell computer. the xp installation went well but I don't know how to proceed with the installation of the required drivers. you have any suggestions on what I can do?
· What is the exact model of the laptop?
Visit this link to download the drivers for Gateway Laptop:
You can also see the following article in the Microsoft Knowledge Base for more information about hardware device drivers:
How to manage devices in Windows XP
Information about the hardware devices for Windows XP drivers
Let us know if this information useful.
3b44877b7f00c8b93588d9924cec7772 I tried to pass thru Panel etc and it proved futile. I continue to have three errors pop up and homepage of the trial Security Office running at a rate of duplication that I can't follow! Tried to ask for help through many different forums and I get no - where! What should I do to get this deleted malicous software once and for all!
Two of many
Note, I've seen this problem since 10.10.0 and tried to follow the permissions situation where he'd just leave. I have reinstalled twice. There are no permanent solution?
The Acrobat installer is built on a different technology than the rest of the apps and so the difference of update.
Now that Acrobat is updated to v 11.0.07 you still get the original error "installation corrupted... reinstall?
Regarding the update error, try to download the update manually from: Adobe - Acrobat: for Macintosh
and install and check.
I installed Photoshop and Lightroom a week ago and have problems with Lightroom crash - usually when I select "Develop" and often when I use 'Maps '. Can someone give me an idea of how solve it/what to check?
I forgot to mention - I am running Windows 10
It might be because of the graphics processor.
Go to the Lightroom preferences > performance > uncheck 'use the graphics processor' > restart Lightroom, and then check out.
I just bought a Windows Vista-based computer and have problems with getting my 125 Palm to synchronize with the desktop computer. I get an error message saying: "No available Com1" what should I do?
Don't ask me the procedures step by step that I did, but I finally success! I uninstalled Palm Desktop and started from scratch. I unplugged the Hot Sync cradle by the USB port, then I installed Palm Desktop from my drive and then update Palm Desktop on the Palm for Palm M125 site. It still does not, I manually added a port and manually changed to COM1. I then pressed the Hot Sync button and in the Device Manager, a folder has become available "device named" with Palm Desktop as a subfolder. It is always active, I updated my computer for Palm USB driver. Miraculously it worked. Thanks for your help, but as usual everything it needed, it was patience and trial and error to solve the problem, since it does not seem to be a quick fix related this topic.
Message relates to: Palm m125
Maybe you are looking for
I get a file (pixel.cgi) who wants to download when I use certain sites (Groupon / Thomas Cook). I scanned my mac for the virus, but none can be found.
On my dashboard startup time game used as PDT or PST. Now it shows GMT. I know that the Pacific time is 3 hours earlier than the time of my region. What difference is there in GMT and the Eastern time and why the change?
Have they ever made of these if yes have you can find today? I got lucky today my cat yet my phone from my office and it hit the ground, it works always, but maybe it was just a lucky fall so looking for a case for this phone if they make them again.
I've been Presario CQ42 Laptop.32 Bit Oprating Sys. Whwn I open HP Consol game to download new game after Complition of 70% of the game App immediately a Massage Flash on my screen:-CODE FRROR 3-1.
Hello I saw many reviews for Aspire R13 (R7 - 371T) mentioned a carrying bag in which it is also possible to put active pen. I bought my R13 a few weeks ago and I would love to have one such pocket. However the Acer store sells only the active pen as