Unable to connect to the internet using 32-bit Internet Explorer.

Similar Questions

• Unable to connect to the internet using Firefox or IE

  Unable to connect to the internet using Firefox or IE. I can ping other pc on my network home and can ping websites such as google.com. Other PCs on the home network connect without problems. Nothing has changed in the network or the configuration of IE/Firefox. The only change is that I have installed the update to Vista SP1

  Hello

  Stack TCP/IP Winsock settings in Vista has probably been corrupted.

  Journal to this page and scroll down, there are instructions for Vista.

  http://support.Microsoft.com/kb/811259

  Jack, MVP-Networking. EZLAN.NET

• Unable to connect to the internet using a Wi - Fi connection

  original title: wireless connection problem

  My son can connect to the internet with his phone and the ps3, but no more with his laptop

  He was able to connect before on laptop. No matter what he tries, he can't re - connect his laptop to the internet... It has windows 7
  Thank you

  Hi mikecampbell,

  If you are still unable to connect to the internet with a wireless and wired connection, make sure first that the wireless card is turned on. On most laptops, there is a button in the front of the laptop. If you are still unable to connect to the internet, follow the steps described in this document.

• Unable to connect to the internet update version

  I've updated to the latest version 35, but since then, the browser seems unable to connect to the internet. I thought it was my firewall that was blocking the program. I did what was suggested to work around this problem, that is, to remove my firewall and then add it again. But it does not solve the problem. There is nothing wrong with my internet, how am I be able to connect to internet by using IE or Chrome. And I was able to connect to the internet in the previous version of Firefox. Unfortunately, the new updated version is not allow me to. Have no solution?

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

• Satellite L300-1 a 6 - unable to connect to the internet

  I have a problem - unable to connect to the Internet.

  First of all, I try to use internet DSL from phone, there was no result.

  Then I try to use digital TV internet - no result.

  Laptop does not detect a network, it says - undefined network.

  My firewall is active, now I use a modem to laptop...

  Sorry, but I don't understand how you have configured your DSL router/modem.

  First of all, you need to configure the router and need to insert all the data from your ISP (Internet service provider).
  Usually the model or DSL with router assigns the IP address. Therefore, only connect your LAN cable to the LAN books and you should get a connection to the DSL router/modem.

  I think that in most cases the whole process is described in the manual of the router

• Unable to connect to the internet via ethernet.

  Unable to connect to the internet via ethernet.

  You have published a statement... is not an issue. You have a question?

  Do you mean that you try to use Ethernet for Internet connection? OR are you asking how to connect to Internet if Ethernet is not possible?

• Reinstalled XP and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Original title: windows xp.

  reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Hello

  Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.

  Get graphics, sound while you're there.

  You should always do a reinstallation.

  Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.

  See you soon.

• Unable to connect to the internet ERROR 678

  original title: Please help me because I get ERROR 678 frequently

  I use a broadband connection on my desktop pc with windows XP SP3, as I tried to connect through windows running phone 7 ultimate, but I was unable to connect to the internet, now even once, I plugged the cable broadband for desktop pc and now I get ERROR 678 , after several attempts to recall that I am able to connect through desktop pc. I have met it 2nd time to do the same procedure for the first time he resolved automatically, but now there's a problem. also contacted the service provider as their laptop to connect to internet with my account but I can't my pc... HELP ME PLEASE...

  Hi Aniketpawar,

  ·         What security software is installed on your computer?

  I suggest you to follow the steps in the Microsoft Knowledge Base article and check.

  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2

   http://support.Microsoft.com/kb/892889

  Let us know if that helps.

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Setup is unable to connect to the Internet

  When I try to download and install programs on my desktop, I get an error message indicating that Setup is unable to connect to the internet. How to fix this?

  Hi NardoBailey,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the full error message that you receive?

  4. you receive the error message when you install any program on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the Microsoft article below and check if it helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Unable to connect to the Internet or Email

  For some reason, I am unable to connect to the internet or e-mail using a wired connection. Earlier today, I was installing a wireless printer and I got it in collaboration with the wireless network. But now I switched to the cable network and I can not connect. However, the connection to the LAN network is showing that I am connected. To post this message, I had to go back to the wireless network.  I guess I have inadvertently changed a setting somewhere. I know that my firewall is not blocking the connection, because I disabled it previously but the LAN would not even connect. Any ideas?

  Thank you

  Tony

  Well, I found the problem. It's working now. The problem was that the TCP properties have been changed somehow. There was a specific IP address instead to get the IP address automatically is checked.

  Tony

• Unable to connect to the Internet, receive error message: DEBUGER END WIRE.

  Original title: unable to connect to the Internet

  Hello

  I am using Dell inspiron 1525 with Win.Vista Home Premium 32 bit

  When I connect to internet I displays message DEBUGER CANCEL THREAD

  There is no driver problem

  Someone help me

  I thank & regard

  Satish Baker

  Hi Sissi,

   

  1. you are using a wired or wireless?

  2. do you and changes to the network card or manually change all the settings?

  3 when was the last time it worked?

  4. are you tring to set up internet connection in windows vista for the first time?

  Please follow the links below to solve the problem.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  See also this: the problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

  I hope this helps!

• Vista PC is offline, unable to connect to the Internet by LAN or wireless.

  Original title: Vista (Japanese OS)

  My Vista pc is offline (unable to connect to the internet), how install and run the Fixit tool?

  I have read that the English, however, my pc is in Japanese. I can't connect to the Internet by LAN or wireless.
  How can I get the Fixit tool to work on the said pc?
  Help, please!

  Hello

  1. what Fixit tool you try to run?

  2. what exactly happens when you try to connect to the Internet? You receive messages or error codes?

  You can read the following article and check if it helps:

  Windows wireless and wired network connection problems

  You can also read the following article to change the display language:

  Change the display language

  You can use another computer to download the Fix from Microsoft, then use portable storage such as a USB drive, CD, DVD, etc., to carry the Microsoft fix it on your computer.

• Missing error driver unable to connect to the Internet

  Original title: I deleted a driver

  I deleted a driver for my Wi - Fi accidentally when I was manually cleaning the hard drive. When I try to connect to the internet the computer says missing a driver. any suggestions or guidance on how to reinstall?

  Hello

  What is the brand and model of the computer?

  Method 1:

  If you are unable to connect to the Internet via the wireless connection, you can switch to a wired connection to download the driver or to download the driver on another computer.

  Driver can also installed from driver disk provided by the manufacturer of the computer.

  Method 2:

  You can also perform a system restore to the date when the computer was working fine and check.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Important: Restore the system affect the system files of Windows, programs and settings of register that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  Method 3:

  I suggest you visit the manufacturer's Web site and download and install the latest wireless drivers or if you use the link give and check if it helps.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Hope this helps and keep us posted.

• Unable to connect to the Internet via a Linksys Wireless card

  I used a Linksys BEFW11S4 for several years with no problems.  A PC is connected via a network cable and the other (Dell laptop) used a wireless adapter Linksys that plugged into the laptop (model of Linksys WPC11 ver (4).  All my computers using Windows XP with the latest service packs.

  I plugged the Dell laptop to the router via a cable to transfer files faster than the network B.  Then, when I disconnected the cable and reconnected the wireless card, I was unable to use the Wi - Fi connection to connect to the internet.  Wired works very well, is not wireless.

  Windows reports a good wireless connection to the router, but the machine is unable to connect to the internet using the wireless card.  It can connect to the internet when using a network cable, however.

  Pings what either using the Wi - Fi connection failed (expired).

  I used another laptop (a more recent Toshiba with a wireless card built-in) to connect to the router and it works very well with the connectivity wired or wireless.  No problem switching back with this machine.  So, the problem is not with the router or the router configuration.

  I was through the forums and seen a LOT of people seems to have the same problem with these Wireless Linksys routers.

  I tried to use the Easy Link software to configure the machine, but: (1) Linksys updated web site is not valid, and (2) with the www.linksysfix.com/ela site that directs users to the software is also invalid.  Linksys technical support seems to be lacking.

  I went to the usual network setup menus and two laptops seem to be configured the same way, again, we're working wireless and we do not.

  I would appreciate solutions others have tried and who has worked with this problem.

  I reinstalled the drivers for the Linksys card and it does not work.  Windows recognizes the new hardware card, reports that it is connected to the router, but still no internet connection

• Unable to connect to the internet: "Fail to create the RasEntry" or "Invalid Data Modem.

  Unable to connect to the internetwhen using a 3 USB Modem Mobile. Error messages on screen came "Failed to create RasEntry" or "Invalid Data Modem.

  I can't connect to the internet from my laptop (Windows Vista) using a usb modem mobile 3.  Error messages on screen came "Failed to create RasEntry" or "Invalid Data Modem. 3 mobile say they are unable to help me! Any help to solve the problem would be appreciated.

  You need to go to the services and make sure that 2 of them are started:
  -telephony
  -Remote Access Manager (or what is called similar)

  Properties, replace the manual start and apply the changes
  It worked for me on Windows XP machine
  http://www.techsupportforum.com/forums/F135/failed-to-create-RAS-entry-159946.html