Unable to connect to the Internet via AP WAP54G through a BEFSR41 wired router

I'm puzzled. This connection was working fine but something changed... I don't know how he did. I connect to the internet via a WAP54G through a BEFSR41 to a cable modem. I checked all the settings and even reset several times but nothing helped. I can connect wireless to the WAP54G but no internet connection. The signal strength is excellent. The Vista wireless interface signals that I am connected but only locally with no internet relay. What's wrong? What I forgot. Any help will be greatly appreciated.

Advertisement

Solved the problem. Seems a sequence to these pair of power and even if I cycled power, I did not properly. Also, I created a new wireless network to ensure that nothing is associated with the former network that has been tampered contributed to the issue.

Tags: Linksys Routers

Similar Questions

  • Unable to connect to the internet via ethernet.

    Unable to connect to the internet via ethernet.

    You have published a statement... is not an issue. You have a question?

    Do you mean that you try to use Ethernet for Internet connection? OR are you asking how to connect to Internet if Ethernet is not possible?

  • Unable to connect to the Internet via a Linksys Wireless card

    I used a Linksys BEFW11S4 for several years with no problems.  A PC is connected via a network cable and the other (Dell laptop) used a wireless adapter Linksys that plugged into the laptop (model of Linksys WPC11 ver (4).  All my computers using Windows XP with the latest service packs.

    I plugged the Dell laptop to the router via a cable to transfer files faster than the network B.  Then, when I disconnected the cable and reconnected the wireless card, I was unable to use the Wi - Fi connection to connect to the internet.  Wired works very well, is not wireless.

    Windows reports a good wireless connection to the router, but the machine is unable to connect to the internet using the wireless card.  It can connect to the internet when using a network cable, however.

    Pings what either using the Wi - Fi connection failed (expired).

    I used another laptop (a more recent Toshiba with a wireless card built-in) to connect to the router and it works very well with the connectivity wired or wireless.  No problem switching back with this machine.  So, the problem is not with the router or the router configuration.

    I was through the forums and seen a LOT of people seems to have the same problem with these Wireless Linksys routers.

    I tried to use the Easy Link software to configure the machine, but: (1) Linksys updated web site is not valid, and (2) with the www.linksysfix.com/ela site that directs users to the software is also invalid.  Linksys technical support seems to be lacking.

    I went to the usual network setup menus and two laptops seem to be configured the same way, again, we're working wireless and we do not.

    I would appreciate solutions others have tried and who has worked with this problem.

    I reinstalled the drivers for the Linksys card and it does not work.  Windows recognizes the new hardware card, reports that it is connected to the router, but still no internet connection

  • Satellite A60: Unable to connect to the internet via a modem - no dial-up

    In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

    Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
    The driver is asyncmac.sys = MS Access Remote network serial driver.

    I have:
    -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
    -modem uninstalled / reinstalled
    -update of Windows XP through windows update
    -update of the bios / modem / network drivers from Toshiba

    No luck, the RAS asynchronous card error is still there.

    Any suggestion?
    Thank you
    Alessio - Italy

    I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
    The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
    On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
    http://forums.practicallynetworked.com/showthread.php?t=6781
    I followed the instructions and run RArepair.exe.
    It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).

  • Unable to connect to the Internet via my iPad "Personal Hotspot"

    Hello

    I am connected to the internet via my Personal Hotspot iPad2 connection and my laptop... works very well, as you can see... BUT when I do a search on my cinema system Sony Home the wifi hotspot does not yet show upward!

    How can I connect to my Personal Hotspot iPad2?

    Thank you

    Phill

    Hi Phill,

    A Hotspot is limited to a certain speed by the operators. Access point might not meet the requirements for streaming the video data on the Internet.

    So, the Home Theater system cannot be connected to the Hotspot.

    The Internet speed should be 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

    If my post answered your question, please mark it as an "accepted Solution".

  • Unable to connect to the internet via a cable brodband or dsl computer laptop HP pavilion g6

    good day to you all...

    Please kindly help regarding me my problem... I deleted my local c drive using a third-party gparted application... I did this because I do a partion before I reformat my laptop HP PAVILION G6... then I have already installed windows 7 on my laptop, but my problem now I can not connect to the internet via broadband or ADSL cable... can you please help me find a solution... also, my wifi does not work before and I found the wireless LAN driver here I download yesterday... now wifi works...

    Thanks in advance

    Hello

    Please download the driver from the internet of the HP website steps below.

    1. Go to the web page software downloads & HP driver for your model.
  • Tecra A8 - unable to connect to the Internet via a cable

    Hello!

    I can't connect my laptop to the Internet via cable. The laptop does not recognize when I put the cable. Recognize only the wireless connection.

    Can someone tell me, what is the right software that I need to install in order to have cable internet?

    Hello

    Normally you n t need a software to connect to Internet or router. You should only check the TCP/IP settings. This means that if you have a router that supports DHCP default settings should be allowed, otherwise, you will need to set static IP addresses. It s based on your router configuration.

    What OS do you have right now?
    Is the OS installed Toshiba now or another OS?

    You can also try to update the network driver which can be downloaded from the Toshiba page.

  • Unable to connect to the internet via the Time Capsule 2 TB router

    Hello

    I can't connect wireless to the internet using my Time Capsule (see 7.7.3 running).

    I mainly use a macbook air (so no ethernet jack) running El Capitan 10.12.2 but the problem also occurs with our iPad and iPhone.

    The system has worked for a few hours after the initial Setup, but our ISP crashed and I was not able to make it work since their entry online. I've used a Linksys router.

    ISP is done via a wireless connection. The provider can see my antenna and an Apple device connected to it. I have a static IP address with DNS assigned.

    My airport utility shows green for the network connection and the internet but no Web page will open.

    I did reset hard and reconfigurations a few times which one where I left the modem to the router cable disconnected until I got the full configuration.

    The wireless network is using DHCP with DNS assigned to a beach.

    Router mode is DHCP and NAT.

    Any ideas would be appreciated.

    There are a number of situations where the TC will simply not work.

    I have a static IP address with DNS assigned.

    If you have configured the Internet of TC tab with static IP address?

    Would it not be possible to get the address IP via dhcp... have you tried?

    Wireless modem is connected by ethernet to your TC? Also, the modem is a router that is bridged?

    I really need to see the numbers... but it's not good to put the public IP address here... xxx on the first two bytes and just give me the rest... as long as the IP and gateway are the same.

    Or send it to my email address. (see my profile).

    Your linksys might work, but the CT will not... This happens because Apple does not provide sufficient flexibility to allow the wireless Internet service provider. (Or Satellite or fiber or some ADSL).

    But it can also be a problem with the network... we have problems with the WAN port with some modems.

    Does the ethernet connectivity light come on, when you connect the modem to the WAN port on the TC?

  • LAN Internet - unable to connect to the Internet via a LAN cable

    Hello

    I have an ASUS F3S laptop series running on Vista.

    I went on vacation in early June this year and when

    I got home that I could not access my internet broadband via the bootable.

    I have an another old laptop which works fine using the local network.

    I use the ASUS at work and you can get the internet via wireless LAN.

    When I try to go online using the LAN laptop trying to access the internet

    using the mini port WWAN and not the LAN port.

    I have tried to replace the drivers and in desperation, have used the recovery

    drive to get Vista back to its original setting.

    I still do not have access via the LAN port.

    Any ideas?

    Sanquay

    You must re-create the network connection Wireless LAN (remove the current which is probably set to use the mini port WWAN and create a new one) and specify the LAN port during installation.  This should solve the problem. Check out the following articles for some detailes, suggestions, troubleshooting instructions and general information that may be useful.  Pay special attention to how to remove a wireless/network connection as it differs from a regular connection, and if not done correctly can continue to exist when you think he's gone (and the system it shows same gone but is not).

    Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

    Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

    Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

    Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Unable to connect to the internet via a modem router - Satellite A200

    Thanks to Xardas, I was able to successfully install Windows XP Pro, but not everything is working as it should. Of immediate concern is my inability to connect to the internet (DSL) through the installation of the existing modem router that I use. How can I check that the ethernet drivers work? … My Satellite A200 does not - connect the appropriate port light does not illuminate.

    Oh yeh. I noticed that whenever I start (boot) a "Wizard" pane appears informing me that new hardware was found and that the drivers have not been installed but it doesn't tell me what the new material is! At the same time, there is a separate pane that announces that the drivers have not been installed correctly.

    Of course, I can use the computer as it is, but before letting my wife loose on this subject, I would like to get rid of anything that can give her cause to panic.

    Where are you Xardas?

    Check please the Device Manager and all the entries listed under network adapters. LAN card is listed there?

    Have you installed driver LAN?
    What A200 you exactly (A200-xxx)?

  • Unable to connect to the internet via a Netgear router

    Original title: Hello, my HPwill not recognize my Netgear address

    My roommate paid late clearwire and clearwire held my HP for Robert. Eventually my computer wouldn't put my netgear on the address bar signal.

    Hello

    1. you receive an error message?

    2. what operating system installed on your computer?

    3. what happens when you try to connect to the internet?

    Provide more information to solve problems. Refer to this article How to ask the question: http://support.microsoft.com/kb/555375

    Also refer to this link and check if it helps: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-finding-wireless-networks

  • Unable to connect to the internet via broadband

    After installing a new disk hard in my desktop PC, I installed Windows XP Pro and everything works OK except that there is absolutely no connection to the internet through IE. I spoke with a convenience store at Verizon and after checking all the normal settings within Windows, she asked me to look in the my network places on the desktop, and - there is nothing there...!  She said that something won't fade with the computer or hard drive. Their link to my house and my other computer are very good...

    When I installed XP, at some point, he said that he could not find a file so I removed the installation disc and re-introduced it in the DVD player. Then the XP install has conducted and finished up nicely...

    Why is there nothing show in my network places and how can I fix this so that I can make a connection?

    Hello

    Your network card is probably not installed at all, or it is not installed correctly.

    Maybe this can help, http://www.ezlan.net/debug.html

    Once it is installed correctly, you need to configure file sharing in order to see the computer on the network.

    Maybe this can help.

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq#trusted

    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

    In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

    http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  • Unable to connect to the Internet via the router and Modem

    I've recently updated my version of office xp to windows 7. I have a D-link router and a modem with an ISP, and they are all correct, the son. I tried to install the router, but it cannot detect an ethernet cable, even if everything is good. I shot all three offshore, the computer, the modem and router for 60 seconds, reset the router and tried to configure a connection through windows, but nothing seems to work. I have a laptop that can capture the wireless signal and connect to the internet through this. But it's the computer that cannot find the modem or router and does not connect to the internet, I am lost on what to do.

    If your laptop is connected through the router (wireless), then your router is
    more or less OK.
     
    Go to Control Panel/network connections.
    If your PC has both wireless and LAN cards, turn off your PC wireless
    network, here's how:
     
    Right-click on the icon of your PC's wireless network connection. Select Disable. Wait
    until the end of this process.
    Then, right click on icon to connect to the LAN of your PC. Select Disable. Wait
    until the end of this process.
    Now right click on icon to connect to the LAN of your PC. Select Enable. Wait
    until the end of this process.
     
    Open a command window (cmd.exe). We will see if there is a LAN connection. On
    the command line type:
     
    Ping 67.195.160.76
     
    then 'Enter '. What answer did you (paste here). If you receive the answer
    pings, enter this next...
     
    Ping www.yahoo.com
     
    then 'Enter '. What answer did you (paste here). If you receive the answer
    pings, open your browser and go to www.yahoo.com. What is going on?
     
    Other things to check...
    You have DHCP enabled in your router configuration (preferred answer: Yes)
    Set the maximum number of DHCP users to 10 or more (you can reduce that
    later if you prefer).
    Is set to "obtain an IP address automatically" the IP address of your PC
    (preference response: Yes, unless you know what you are doing) or is it
    already a value in place.
     
    "staz2020" wrote in message news: a707c004-e504-4f14-b1d4-2bc465c15eb3...
    > I have recently updated my version of office xp to windows 7. I have a
    > D-link router and have a modem with an ISP, and they are all correct, the
    > son. I tried to install the router, but it cannot detect an ethernet
    > cable, even if everything is good. I have disabled all three, the
    > computer, modem router for 60 seconds, reset the router and tried
    > establishing a connection through windows, but nothing seems to work.
    > I have a laptop that can capture the wireless signal and connect to the
    > internet through this. But it's the computer that cannot find the router or
    > modem and does not connect to the internet, I am lost on what to do.
    >
     
     
  • Office: Unable to connect to the Internet via WiFi or wired

    I can't connect to the Internet when I'm on WiFi. What can I do?

    Bill

    Hey,.

    If your computer has problems connecting to a wireless network, problem of speed or connections dropped then try this simple walk through here: Troubleshooting Wireless.

    You can also simply restart your PC, as this can solve the problem quickly.

    -wes

  • Unable to connect to the internet via 3G or WiFi on Satellite A110-178

    I am not able to connect to internet with my 3G modem or wireless.
    Error messages said I should check the settings or that it is impossible to find connections.

    When I turn on the computer, I noticed that it takes longer than usual and there is an error message that says this:

    + "Unable to connect to a windows service windows is not able to connect to the System Event Notification Service service." +
    + This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. » +

    I would like more ideas on how to solve this problem. I tried to disable my antivirus program and firewall and all the things that my 3 G support
    told me to do.

    Thank you very much!
    / Lena

    Hey, Lena,.

    Have you already consulted suggests the system as event log error message? It is always an interesting thing, where you can try to find that more information on this error please check this first!

    I m not a Windows expert but check Services (start > run > services.msc). Make sure that the System Event Notification Service is run or try to restart this service.

    By the way: you can also tell us what OS you're using now?
    The driver for the wireless network adapter is updated?

Maybe you are looking for

  • Force synchronization iCloud drive in El Capitan

    My files have all been transferred to iCloud.com and the folder and file structure all the shows in my Finder with the cloud / down arrow, but I cannot open the files at all. brctl newspaper w indicates that the network is accessible, but otherwise n

  • install windows 10 on old mac

    Now that bootcamp will not let you install windows on an old Mac 10, can it be done without bootcamp?

  • Designjet 130nr: designjet 130 nr used power up

    It's been a few days I used the machine. When I didn't hit power button / stop no response. I unplugged the power cord for 30 seconds plugged back in. it turned on but no info is showed in the display screen. I was able to start a print job, but the

  • My non-visible music in Sonos

    Used Apple music for a few months and have added various albums to the folder 'my music '. These albums are not visible in Apple music and Im only able to play albums when I search for them through Apple's music. You should be able to play through my

  • Cannot run FIFO host vi

    I tried the example FIFO to http://zone.ni.com/devzone/cda/tut/p/id/4534 and built a very simple FIFO vi.  However, whenever I save after all after the application runs without a problem, when I open the project, host fpga and vi vi vi host cannot be