Unable to connect to the Internet with my Satellite 1800 712

Hello

had to reinstall Windows XP Home on my Satellite 1800-712, unfortunately do not have the recovery disc otherwise it would all be ok.

Now, I can't get on internet, I downloaded new drivers for LAN, they installed ok, LAN is set to autodetect, USB wireless dongle drivers installed everything is ok.

In my tray icon (bottom right) shows the networks but with red cross... I get a message saying that wireless networks are within range, click here to see the networks... when I click, Sun protection comes up saying no. networks in range... aarrrgggh.
What can I do, please?

Hello

First you need to check if the wireless network adapter appears in Device Manager (expand network controllers).
If the local network adapter is listed and there is no yellow exclamation point, this means that the wireless network adapter has been installed correctly.
Now you have to activate the Wlan switch (somewhere on the side of the laptop) and the FN + F8 key combination.

Now Wlan is enabled and you should be able to set it up.
You can use a 3rd Wlan tool part for configuration or specific parameters of Win XP.

Check it!

Tags: Toshiba

Similar Questions

  • Unable to connect to the internet with Foxfire. Can do with Internet Exporer

    I've been using Foxfire. After an update I can no longer connect to the internet with Foxfire. IE can connect.

    Firefox is the name. Foxfire is a bio-luminescent fungus.

    http://en.Wikipedia.org/wiki/Foxfire _ (bioluminescence)

    See this support article - difficulty of problems connecting to websites after Firefox update

  • Unable to connect to the internet with other programs (like Zune) but internet explore still connects.

    I can connect to the internet with internet explore very well. No problems.  But when I try to connect another program to the internet, like Zune or Wildtangent games the program says that I'm not online.  I know that I'm online because I check to make sure you Internet explore, and which still works.  I already tried to change the firewall settings to allow programs through, but that did not work either

    Hi Chloe,.

    1. What is the exact error message?
    2. Since when are you facing this problem?

    However, try the following steps.

    Step 1: Add zune except for windows firewall.

    1. click on start toreduce this includes this image, type firewall.cpl in the Search box and press ENTER.

    2. click allow a program through Windows Firewall. Collapse this includes this image
    If you are prompted for an administrator password or a confirmation, type the password, or click continue.

    3. click on add program.

    4. click on Browse.

    5 locate the Zune and then click Open.
    Note By default, the Zune is installed in the following location:
    C:\Program Files\Zune\

    6. click OK twice.

    Step 2: Windows live onecare

    1. Start Windows Live Onecare.
    2. Click change Onecare settings.
    3. Click the firewall tab.
    4. Click on Advanced settings.
    5. Scroll through the list of programs to determine if Zune appears in the list.

    ·         If Zune appears, make sure that the Zune is set to allow instead of block.

    ·         If Zune does not appear, follow these steps:

    1. click on Add.

    2. Locate the Zune and then click Open.

                    Note By default, the Zune is installed at the following location: C:\Program Files\Zune\

    3. click OK twice.

    http://support.Microsoft.com/kb/927980

    Try these steps and let us know the result.

    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Unable to connect to the internet with iPad mini, iOS 9.2, while I can with my old MacBook, OS (10.75).

    I'm away from home at a place which provides the free wifi connection without password.  My old MacBook with Mac (OS 10.75) is connected to the internet without any problem here. My iPad mini iOS 9.2 cannot, and they are many around here. What should I do besides take a hike outdoors?

    Don't know how this issue would be related to products that we support in this forum... AirPort Express, AirPort Extreme and AirPort Time Capsule below... but we will try to help you get started in the right direction.

    Start by looking at this Apple support document:

    If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

    If still no luck, you will receive a much more informed response if you post in the forum to support iPad. The link is here:

    With the help of iPad

  • Unable to connect to the internet with the new installation of XP Service Pack 2

    Hello.  I have an old laptop (Dell Latitude D630) that I recently reinstalled Windows XP, service pack 2.  I logged directly into my Fios modem because I can not find how to connect wireless.  When I open Internet Explorer it says that cannot display the page.

    I went to tools, Internet Options, connections and Lan settings.  There automatically detect the settings checked and that's it.  When I try to tools, Internet Options, connections and the installation program, it seems to want to set up a dial-up access.  When I go to control panel and click on network connections, it shows a 1394 connection that is connected and a firewall.  By clicking on status shows connected to 400 Mbps.  I tried to repair the connection, just in case, and it is said that he could not finish because he could not question the connection TCP/IP settings.

    Did anyone know what I can do to connect to the internet, so I can run Windows Update?

    Thank you.

    In addition to advice Xircal you need sp3, the first thing you need to do is to install the drivers for your hardware.  If what you see in network connections is an icon for an IEEE 1394 (FireWare) connection, you must at least install drivers for your Ethernet network cards and wifi.

    With the help of a computer that can connect to the Internet (for example, the one you use to post here), go to http://www.dell.com/support/my-support/us/en/555?c=us&s=biz&cs=70&l=en and enter the serial number for the laptop.   Download drivers for your Dell D630, copy to a USB flash drive (or burn to a CD) and install as shown here--> http://www.dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=gen&docid=268873

  • Unable to connect to the internet with the new computer, the signal strength is excellent

    Bought a refurbished Dell D630

    from Newegg ($300 w / 30 day return) because navigation software, I run on the boat (Nobeltec 9) can only work on 32 bit laptops. I followed the instructions for activation. Windows XP Professional is preinstalled. Although, according to the icon in the right screen below, the signal strength of my wireless connection is strong ('excellent' signal, speed strength is 54.0 Mbps), I can't connect to the internet. Other laptops in the House go online without problem. What I am doing wrong? Chris

    Hi yakobi,.

    1. what happens when you try to connect to the internet?

    2. do you have security software installed on the computer?

    See the below Microsoft article and make sure that all the wireless settings are correct on the computer.

    How to troubleshoot wireless network connections in Windows XP Service Pack 2

    http://support.Microsoft.com/kb/870702

  • Unable to connect to the Internet with Magic Jack

    Original title: network programs network networking Internet Web site Site Web Web Site URL

    I recently bought a magicjack, it keeps telling me to connect to the internet, which I am connected. What I need to know is how to run on windows 7

    Hello

    You must contact the Support of MagicJack.

    http://www.MagicJack.com/5/FAQ/

    http://www.MagicJack.com/5/customercare.asp

    I hope this helps.

  • Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.

    Hello

    I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.
    But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.
    Please don't point, should I upgrade Windows!
    Thank you.

    Hi friend,
    You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
    I saw not a ME machine in too many years to count!
    Good luck on your adventure.
    B Eddie

  • Unable to connect to the internet with Skype using mac

    I'm having a problem calling. I get a prompt saying you are not connected

    to the internet. I am connected to everything except Skype. I used Skype before

    without problems.

    It can be something simple, like your Skype being the Offline status.

    --
    Entia non sunt multiplicanda praeter necessitatem.

  • Unable to connect to the internet with my Compaq Presario CQ5500F after a clean install of Win 7 64 bit

    Hello

    I recently did a clean install on my Compaq Presario CQ5500F desktop, but when I finished, I realized that I could not connect to wireless internet almost anything. To clarify, my internet worked before the clean install. I know exactly of what readers have been installed, but I do not know the network controller has a yellow question mark on it now. (See attached image)

    In addition, it seems that the computer does not have a wireless card although I was previously using an omnidirectional antenna external wireless connected to my wifi.

    I have already visited the HP/Compaq site here http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4209... to install the drivers, but it seems that the network controller, it does not install correctly.

    Can someone help me please? I am very frustrated.

    In fact, I just solved it!

    I looked up the material ID I had just posted on Google and found that someone had the driver on his Skydrivefiles. Then I followed their instructions and went into the Device Manager and selected Update driver the driver of your properties of network adapters tab and pointed on the expanded files.

    Turns out I need files for Ralink RT61 Turbo Wireless LAN Card.

    Everything works again!

    Thanks for me direction in the right way, Paul!

    I hope that someone else has acquired this too!

  • HP pavilion model dv9910us: unable to connect to the internet with hp laptop using xfinity router/modem

    Hello

    I have a hp pavilion computer model with windows vista premium OS hom dv9910us.  I have a wireless modem/router xfinity gateway device.  I got it somewhere else and it worked using verizon with a router and a separate modem.  I also tried a location xfinity with a router and a separate modem and it worked.  I had a separate wireless adapter and installed and disabled the atheros ar5007 adapter in Device Manager.  This 2011 atheros adapter will work with this model computer using the operating system windows vista Home premium.  If so, could I leave the disabled ar5007 and install the 2011 to make sure it's ok before you uninstall the ar5007.  I'm really a novice and stumbling just my way through it.  Any help is appreciated.

    Hello:

    You must enable the atheros wireless card and install this driver.  It has no effect on the other you use.

    http://h20564.www2.HP.com/hpsc/SWD/public/Detail?sp4ts.OID=5060881&swItemId=ob_108905_1&swEnvOid=4059#.

    Then turn the PC off, remove the usb adapter, reboot and see if you can connect via the atheros card.

  • Unable to connect to the internet with my virtual machine

    Hello

    I use vmware workstation 10 Windows 8, I run the machine virtual windows server 2008 R2. I have configured the apdater network of the virtual machine on the NAT to share the ip address of the host address, but I don't have access to the internet! When I check my network apdater it shows that no network apdater is connected? help please

    you're hard coding of the IP address of the virtual machine or to an address must be assigned by DHCP?

  • Unable to connect to the internet with security enabled

    I can't connect my laptop vista to internet even if it says it's connected withn a strong signal. I make little or no connectivity messge. However, it will connect if I turn off my security on the d-link wireless router, but I am reluctant to leave the secure network connection. I have an another vista laptop that connects secure or non-secure mode as does my netbook xp and xp desktop. Any ideas.

    Hello

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    Actually try updating your driver and disabling the network logon. You can use a wired connection or
    Download drivers on another computer and transfer using removable media.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an address IP of certain routers or from certain non-Microsoft
    DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Unable to connect to the Internet with router.

    All computers, roku, nook, except that I have Vista connect easily in the router near gear TWC made us use in particular. It has a name of MONTAGUE and a code of 4232306936. He worked during the year, but his Toshiba with Vista will not open on Montague for some odd reason and no one can understand it. Only if I put a 1 in the end seems to work but I fear that will make just an another issue, please help uss, it has been three months without internet for her.

    Hello

    What brand / model of the router?
    Method 1:
    You can make use of the network troubleshooting. Check out the link.
    Use Network Troubleshooter event logs to solve network problems
    http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems
    Method 2:
    Check out the link and follow the steps.
    How can I troubleshoot network card?
    http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
    If the problem persists while you can contact the manufacturer of the router for assistance.
  • Unable to connect to the internet using a Wi - Fi connection

    original title: wireless connection problem

    My son can connect to the internet with his phone and the ps3, but no more with his laptop

    He was able to connect before on laptop. No matter what he tries, he can't re - connect his laptop to the internet... It has windows 7
    Thank you

    Hi mikecampbell,

    If you are still unable to connect to the internet with a wireless and wired connection, make sure first that the wireless card is turned on. On most laptops, there is a button in the front of the laptop. If you are still unable to connect to the internet, follow the steps described in this document.

Maybe you are looking for

  • Refund purchase game

    It's stupid to go through all this to get a refund for something I have never receipt! < published by host >

  • [HELP] How to install an application for iPhone to PC for Android (new user).

    Hello guys. I just started to use IOS 2 days after using Android for years. I have a question related to the installation of an application on IOS 9.3.2 I found on the App Store on my PC. I tried to tinker with the app on iTunes 12 who installed on m

  • Qosmio X 300 - Windows shows too little RAM

    Hi all I just bought X 300 with 4 GB of memory. When I looked at the "physical memory" in Windows Task Manager, it has only physical 1789 MB with 1056 Cached. It is this normal? I also installed "All the CPU Meter" for Windows sidebar... it shows the

  • EtherChannel

    HelloWe have a few new hosts. I would like to check, if the cisco etherchannel works very well. Does anyone know how to check this?We have set up 4 network cards on a vSwitch with this work on 2 nexus cisco with a configured etherchannel to ip hash l

  • Exclusion DBMS_DATAPUMP

    Hello How to exclude the index, synomys, grants, statistics while making import using DBMS_DATAPUMP. Could someone pls give me the syntax to exculde these things. Thank youJP