Unable to connect to the internet without Ethernet cable.
I have a new router, but can't seem to connect to the internet without Ethernet cable. Trouble Shooter diagnostic tells me that "Windows cannot communicate with the device or resource (primary DNS server). I am at a total loss!
Not sure, but this post can help (as seems to be the same or a related problem) - http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-communicate-with-primary-dns-server/9043f785-2f4e-4cc1-adf5-6ba5ca413749?page=1&tm=1388597381623
Good reading and see if it helps.
Hello. I'm using acer aspire v5 - 431 and my Internet worked perfectly fine this.morning. now, it detects cable the.ethernet. IM using windows 8 and my laptop is only 9 months old. WiFi works perfectly.
Ive restarted the computer laptop, disconnected, did the flushdns doesn't seem to work at.all. pls help! I'm desperate!
Found the problem... it seems that it is a problem with my cable LAN/VGA port combo...
Have to buy a new one! so, for now ill stick with wifi! (T_T)
Unable to connect to the internet via ethernet.
You have published a statement... is not an issue. You have a question?
Do you mean that you try to use Ethernet for Internet connection? OR are you asking how to connect to Internet if Ethernet is not possible?
I have problems connecting to the network via ethernet.
connect the ethernet cable and the laptop connects to the net, but after a few seconds it disconnects.
I don't know what the problem is.
I tried to disable TCP/IPv6 and it doesn't work.
Please can someone help me here.
It's just killed me.
It is not easy to say what may be the problem.
Have you noticed the same thing using WIFI?
good day to you all...
Please kindly help regarding me my problem... I deleted my local c drive using a third-party gparted application... I did this because I do a partion before I reformat my laptop HP PAVILION G6... then I have already installed windows 7 on my laptop, but my problem now I can not connect to the internet via broadband or ADSL cable... can you please help me find a solution... also, my wifi does not work before and I found the wireless LAN driver here I download yesterday... now wifi works...
Thanks in advance
Please download the driver from the internet of the HP website steps below.
- Go to the web page software downloads & HP driver for your model.
original title: connection to the sky
Hi I have a dell Inspiron mini and when I put my sky broadband cable said inside connected to the internet, but when I opened a page it says there is a problem with your internet or something.i have also the wireless network connection, but I think one of my kids messed with the parameter as , I can't use the wireless setting now.so if anyone has any answers I would be grateful.
Hi Kerry,I would recommend contacting Sky support with their internet service:One thing, you can try on your own is following the instructions in this Microsoft article and running the Fixit tool:I hope this helps.
I have a Mac mini as I try to connect via Ethernet cable to a modem Comcast Arris TG862. I was connected via Wifi without problem (with the exception of the slower speeds). I know that the Ethernet ports on the back of the modem seem to work, since I can listen to my TV, etc. In settings > network Ethernet shows as green and connected and gives me an IP address, but as soon as I turn off Wifi no web page doesn't load.
What I am doing wrong? I thought that it would just connect. On the Ethernet port lights, which I think means data transfer. Otherwise, I need to tell Firefox or Chrome to turn to the Ethernet connection?
The default configuration is to have the WiFi over Ethernet in the Service order.
The order must be set such that the (desired) primary service is at the top of the list and the backup service is below.
If you look at the order of service when it is connected to the network, the higher is the provision of access Internet one (or at least, he thinks Yes).
To set the order, click on the menu of the machine and choose the order of Service. Move Ethernet to the top of the list. This should make it primary unless he loses the connection.
However, it must move up Ethernet and provide a connection when you have turned off the WiFi. When you disable WiFi on the Mac, the Ethernet connection move to the top of the list and show a green connection?
My laptop usually automatically connect wirelessly to the Internet at home and work. It worked yesterday but not today.
I checked my internet is fine, I checked the connection with an Ethernet cable and it doesn't work. I tried to connect to the hotspot from my phone, it does not work also.
I have not changed any settings on my laptop.
Need help please, I'm not very tech savvy but he need to get this working.
I can't connect my laptop to the Internet via cable. The laptop does not recognize when I put the cable. Recognize only the wireless connection.
Can someone tell me, what is the right software that I need to install in order to have cable internet?
Normally you n t need a software to connect to Internet or router. You should only check the TCP/IP settings. This means that if you have a router that supports DHCP default settings should be allowed, otherwise, you will need to set static IP addresses. It s based on your router configuration.
What OS do you have right now?
Is the OS installed Toshiba now or another OS?
You can also try to update the network driver which can be downloaded from the Toshiba page.
I have a HP ENVY 8.1 Windows running. No problem until a few days ago, when I couldn't connect to the internet (no e-mail link or a browser).
Wireless and ethernet connections seem to work. I can connect to the internet via another PC, smart phones, etc.
E-mail started acting erractically. I tried to restart the computer, and then he started to install updates. Not sure if she did because it does not connect to the internet.
Based on the suggestions of another post, I tried: flushing the DNS, reset the battery TCO/IP and resetting the catalog.
Restart the PC without installation updates has not improved the situation.
Any help would be greatly appreciated.
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I read your post about how you are unable to connect to the Internet on your laptop, and I'd be happy to help you in this case!
Since you've already tried the DNS of hot flashes, to reset the TCP/IP stack and reset the catalog, I advise you to follow the steps described in this document on the resolution of problems in Internet Explorer (Windows 8), as well as resolve and prevent viruses on your computer (Windows 8). This should help you to access your browser and e-mail on your desktop.
If the problem persists after completing all the steps in the above resources, please contact our technical support by clicking on the link below to get help from your region number.
I hope this helps!
I've updated to the latest version 35, but since then, the browser seems unable to connect to the internet. I thought it was my firewall that was blocking the program. I did what was suggested to work around this problem, that is, to remove my firewall and then add it again. But it does not solve the problem. There is nothing wrong with my internet, how am I be able to connect to internet by using IE or Chrome. And I was able to connect to the internet in the previous version of Firefox. Unfortunately, the new updated version is not allow me to. Have no solution?
It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!
My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...
Would appreciate any help...
Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10
> / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video
Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.
Hi, a newbie on this forum so here goes. I got the "fix Windows 7" virus on my laptop because my virus protection that flows. I downloaded AVG which solved some problems, but still not back to the original values. I reloaded Windows 7, but of course I lost all the software preloaded Toshiba & now cannot connect to the internet (laptop computer purchased through the catch of the day).
What I need to download software/drivers toshiba etc. to address this problem. Thanks for any input.
> now unable to connect to the internet
Can you write more than one sentence about your problem?
Does anyone know how you connect to the Internet via modem, LAN or WLAN? More exactly, what happens if you want to connect, you an error message or probably t can find the router?
Sorry, but without this information there s no end of discussion
My computer crashed with virus; I wipe the hard drive around and installed Windows xp home edition. My computer is fine, but I can't get on the internet. The Device Manager has marked these places with problems (see list below) (problem is no driver installed) I'm just figuring that this is where my problem lies (unable to connect to the Internet) can you tell me please what to do to connect to the Internet and where the problem can be
Video controller (vga compatible)
Go to the manufacturer's site (for whatever the brand / model of your computer is)
Find the template, then download and install the drivers for those
I bought a new E3200 to replace my old Linksys router. It finds my computers and set up a network, but unable to connect to the internet via my Comcast cable modem. I read on this forum to the questions of the Mac address, but it has located the Mac address. Internet IP address is all zeros, and releasing and renewing the IP address does nothing. Help!
Connect to the computer with the Ethernet cable. Check if you are able to access the Internet.
Open the command again.
And do the ipconfig/all.
Note the physical address in the Ethernet connection to the LAN card.
Connect the Modem to the Internet Port of the router and also connect to the computer with the Ethernet cable to the Ethernet port on the router.
Press and hold the reset for 30 seconds button.
Cycle power to the modem and the router.
Open the Linksys router configuration page.
Go to the Mac address Clone and activate it.
Enter the physical address that you noted.
Do not click the Clone my PC MAC, Save the Settings.
Cycle power to the modem and the router. See if you are able to access the Internet.
Maybe you are looking for
can't open, can't recharge it. I like to use, it can't use
want a screenshot of the image file
I just bought a BB Curve 8330 and I use ACT! 2000. is there a way to SNYC these 2?
HelloI have obligation where a node must be nested in itself. For example: <root> <tab name="T1"> <tab name="T1.1"> ... </tab> </tab> </root> I defined the following XSD: <xsd:element name="tab"> <xsd:
I put the button for HDV in capture settings. This is the first time it's the case for me. I checked the firewire cable, I reset the computer, I checked the settings on the capture device and put them in HDV. What else can I do to get the job done?