Unable to connect to the links in my emails

I recently had my firewall/security update and now I can't connect to the links in my emails from hotmail. Does anyone have a solution for this?

Hello Carol,.

Thank you for your response.

I appreciate your time and your concern.

It is good to know that the problem does not persist in Internet Explore.

However, you can reset the Firefox browser by using the steps in the following article:
https://support.Mozilla.org/en-us/KB/reset-preferences-fix-problems

Please keep us updated.

Thank you

Tags: Windows

Similar Questions

  • Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

    HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

    Have you tried to update the firmware on the DI-514?

    You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
    To give a static IP address to your printer:
    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
    -Click 'apply '.
    Now, stop the router and printer, start the router, wait, and then start printing.

    After that you remove and re - add the printer to your Mac.

    Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

  • HP Envy Notebook dv6: unable to connect to the proxy server

    I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.

    HR63 wrote:

    Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?

    I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +

    http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/

    How to remove "Unable to connect to the proxy server" (Virus Removal Guide)

    This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
    Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
    STEP 1: restore the default proxy to your machine settings
    STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
    STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
    STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
    STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
    (Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome ads

    http://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/

    It is with IE

    Step 1 - launch Internet Explorer

    Step 2 - Click the icon "but" it looks like a gear wheel...

    Step 3 - select 'Internet Options '.

    Step 4 - Select the 'connection '.

    Step 5 - Click Lan settings

    Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."

    Step 7 - click 'Ok' to save the changes

    If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:

    Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.

  • "Unable to connect to the Skype server" error on samsung wave 723

    I got Skype Lite (or the Java thing, whatever we call it - does not allow calls - only CAT) on my Samsung Wave 723 for more than six months. Earlier this week he suddenly disconnected me and when I tried to log in again it showed this error "Unable to connect to the server of Skype." almost immediately after, I started signing in. I tried to reset the settings in Skype, my phone settings, I took out the battery and reset even WiFi. Then I tried to connect with a few other WiFis - still the same error. My friend has the same version of Skype Lite on his cell phone, and it works very well and without errors.

    Anyone know how to fix this error? It is urgent, please.

    Solved the problem on my phone. I just had to add the area code to my phone number in the connection menu.

    @yousef8824: I downloaded my Skype Java one of those ages of links it is a. not useful at this time.

  • HP series D110: update Apple OS Sierra this morning. Now unable to connect to the printer HP series D110 to scan.

    Apple OS update Sierra 10.12 and now unable to connect to the printer to scan. Version of the driver for HP printer is HP inkjet 1 pilot 3.3.2 can someone help me?

    @Lancer3

    Welcome to the HP Forums, it's a great place to get help, find answers and advice,
    Thanks for posting your request, I'll be more than happy to help you

    If I understand correctly the printer to scan does not work after the recent update of the Sierra,

    Don't worry, even if the following document does not mention Sierra, the Apple article will guide you through the steps to scan through

    • Image capture
    • Overview
    • Printers and Fax preferences in system preferences
    • Scanner / printer queue

    The basics of the Mac: using a scanner

    I also suggest to use the Apple Scan while you wait for the HP software update. You can use the link below to confirm that your printer is still compatible with your operating system: software of the printer and scanner for macOS Sierra, El Capitan, Yosemite, and the Mavericks.

    For links related, please here.

    To troubleshoot the macOS Sierra problems: click here

    If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
    Good luck.

  • Unable to connect to the server

    I have an officejet pro 8600plus. When I bought it, I have activated ePrint and registered my printer, but never used the feature. Since then, I updated from XP to windows 8.1, changed a router and connected the printer through a series of switches on a wired ethernet connection. A few days ago, I tried to use e print but received a message that I couldn't connect to the server.

    my printer prints fine, connects to each computer on my home network, I just upgraded the firmware with success to [personal information deleted]
    and yet, for more than three days, unable to connect to the server. I even deleted my account eprint printer, after changing his email successfully, but now I can not add new, I can't get the code because I can't activate the web plus services. I can scan from the printer to files network and all, but can't seem to activate eprint.

    can anyone help?

    Thank you

    Gill

    Hi the gills.

    Welcome to the HP Support forums.  I think since upgrade to 8.1 Windows and change your printer router cannot connect to web services to get the job of ePrint feature.

    Please define Manual of the printer an IP address manually and DNS servers. I've included a link to another post, I did it with the stages (including screenshots) how to do it.

  • Unable to connect with the PC tab

    I bought a Ubislate android 7 C + from Datawind, but unable to connect with the computer

    Burnersalvation,

    To provide the proper resolution, I would need more information on your side.

    1. which version of the operating system are you using?

    2. what happens when you try to connect to the tab?

    3. How do you connect tab to the computer?

    To connect to Android Ubislate to the computer, it may require some software to install on the computer provided by the manufacturer of the tab. Then I suggest you to contact the manufacturer of the tab to get help on this issue.

    Check out the link:

    http://www.ubislate.com/contact/index.html

    Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

  • I am unable to connect to the Linksys WRT54G Router with wired connection to Office XP.

    My two laptops (XP and a Win7) will be connected to the router wireless and wired (ethernet). When it is plugged directly into the DSL modem, the Office connects and works very well. This problem started when I had to replace the DSL modem.

    I inherited this problem for my elderly mother... and it all started because they gave me the router password wrong, who now works (router has been reset) on two laptops, but when connected, the Office doesn't even show a light of connection on the router except during startup. I no longer get a window of logon passwork for the router, and I am unable to connect/ping the router in the office. (192.168.1.1)

    I would like to clarify a few things.

    1. two laptops work fine with cable connections and wireless through the WRT54G.

    2 desktop PC, which has only a wired connection, does not connect successfully.

    3. the symptoms of the failure of the desktop connection to are that the link on the router at the start light flashes during initialization of the PC but then will Dim.

    4. when the desktop PC trying to connect to the internet, it fails.

    5 when the desktop PC try to connect to the administration WRT54g page it fails.

    6. when the desktop computer try PIING the router at 192.168.1.1 IP address it fails.

    These points are correct?

    Assuming this is correct, open a command prompt and type

    IPCONFIG/ALL

    The output of the command should provide some information about the current state of the network connection.

    It would be useful that you posted this here release.

    The absence of a link light can be your main symptom and may be due to several reasons. He probably has an associate status "media disconnected" in IPCONFIG for the network connection.

    This could be caused by a bad network cable or a network connection disabled in the properties of the network on the PC. Small jets knowing the ot IPCONFIG output is would help more.

    Post this info if you can.

    Good luck

  • After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

    original title: NETBios TCPIP of missing in Device Manager

    I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7000

    Date: 16/01/2012

    Time: 12:31:17

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The NetBios over TCP/IP service failed to start due to the following error:

    The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 12:31:17

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

    The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 13:32:01

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

    A device attached to the system does not work.

    Event type: error

    Event source: Service Control Manager

    Event category: no

    Event ID: 7001

    Date: 16/01/2012

    Time: 13:32:01

    User:                       N/A

    Computer: JARRIOUSSTUDIO

    Description:

    The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

    A device attached to the system does not work.

    When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

    Hi Diddy Dell,

    Follow these methods.

    Method 1: Performs a search using the Microsoft safety scanner.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Method 2: Follow these steps:

    Step 1: Start the computer in safe mode with network and check if the problem persists.

    A description of the options to start in Windows XP Mode

    http://support.Microsoft.com/kb/315222

    Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: Follow the steps in the article.

    How to reset the Protocol Internet (TCP/IP)

    http://support.Microsoft.com/kb/299357

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • After a virus attack, I am unable to connect to the server from any client computer.

    I have a small net work in my house, and until yesterday, the network works well. MSSE has cleaned up win32 virus attack yesterday and here after that I am unable to connect to the server of customers while I was able to connect to server cleints. Infographic customer request user LRN & passwiord against which I entered the data from the server connection, but it displays the sdame error message. PL help someone who will be widely recognized.

    Thank you best regards &.

    Gandhi Prasad

    original title: connection from the Client to the network problem

    Hello

    Your question (Windows XP) is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public Server on TechNet. Please post your question in the Windows Server Forum. You can follow the link to your question:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • Setup is unable to connect to the Internet

    When I try to download and install programs on my desktop, I get an error message indicating that Setup is unable to connect to the internet. How to fix this?

    Hi NardoBailey,

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    3. What is the full error message that you receive?

    4. you receive the error message when you install any program on the computer?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    See the Microsoft article below and check if it helps.

    How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

    http://support.Microsoft.com/kb/2438651

  • Unable to connect to the Synaptics Pointing Device Driver.

    Trying to open my mouse to check my control panel mouse settings, I get a dialog of pointing device Synaptics w / these message: "unable to connect to the Synaptics Pointing Device Driver. . If you have installed another device pointing PS/2 Driver please uninstall the Synaptics driver by clicking on the Yes button.  You must then reinstall your device pointing to your external device driver again. "I have NOT installed another pointing device driver and my mouse and touchpad work ok.  However, as I can not access my mouse, I can not set or configured my settings of the mouse and touchpad.

    Hello

    ·        You did changes to the computer before the show?

    ·        What happens when you click the Yes button in the error message?

    ·        You are able to use the mouse on the system?

    I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

    http://www.Synaptics.com/support/drivers

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

    http://www.Synaptics.com/

  • NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

    Hi all

    I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

    They read as follows:

    NtrigApplet - unable to connect to the driver: failure to open the device

    TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

    CAN SOMEONE PLEASE HELP?
    THANK U :)

    Hi the apprentice 85,

    Remember to make changes to the computer before that happened?

    Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

    Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

     

    Step 2: Put the computer to boot to determine which program is causing the problem

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot open the synaptics pointing device in windows vista, upgrades are far but message error, unable to connect to the synaptics pointing device

    Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer

    with Brice thanks.

    Hi paiyay,

    Thanks for posting in the Microsoft Community.

    I understand that you are unable to open the synaptics pointing device in windows vista

    · You did changes to the computer before the show?

    · What happens when you click the Yes button in the error message?

    · You are able to use the mouse on the system?

    I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

    http://www.Synaptics.com/support/drivers

    http://www.Synaptics.com/resources/drivers

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Connect the hard disk, and then try running the fix tool of the article below and check out them.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

    http://www.Synaptics.com/

    See also:

    FAQ and troubleshooting

    http://www.Synaptics.com/resources/consumer-tips

  • Unable to connect to the Internet, receive error message: DEBUGER END WIRE.

    Original title: unable to connect to the Internet

    Hello

    I am using Dell inspiron 1525 with Win.Vista Home Premium 32 bit

    When I connect to internet I displays message DEBUGER CANCEL THREAD

    There is no driver problem

    Someone help me

    I thank & regard

    Satish Baker

    Hi Sissi,

     

    1. you are using a wired or wireless?

    2. do you and changes to the network card or manually change all the settings?

    3 when was the last time it worked?

    4. are you tring to set up internet connection in windows vista for the first time?

    Please follow the links below to solve the problem.

     

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

     

    See also this: the problems of Internet connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

     

    I hope this helps!

Maybe you are looking for

  • Run Bit Defender on my Mac?

    El Capitan, 10.11.4 running VS. I installed Bit Defender on my Mac. I assumed it was OK I found for Bit Defender in the iTunes Store. Should I not have installed?

  • Space Yoga 11 s

    Hi guys,. So I just bought a s 11 of Yoga and it seems like a great machine. My only concern is the available disk space. I have the 128GB ssd but right out of the box I have only 61 GB. Is this normal? I can't image windows 8 and lenovo drivers over

  • VI analysis with subvis

    I've been testing the unit test tool provided with LabVIEW and I can set up and run tests on each unit. The tool is able to create a unit test for every vi in a project at one time? I could then just modify each test to test the vi that it is. Also,

  • GPIB controller "sre 0.

    I have an application LabVIEW 7.1 interfaces via GPIB (488-2) with a panel of Interface Ruska 6005.  Essentially, there is no problem. However the author has used "sre 0" at the end of the program for unassert REN and return control of the operator i

  • State of the mouse with menu items that overlap control

    Hello I have a problem with the recovery of the location of the mouse using GetGraphCoordsFromPoint... I use the return status of GetGraphCoordsFromPoint to determine if the mouse cursor is over the plot of my graph control area (1) or not (0) to swi