Unable to connect to the network "\\localmachine\sharedname" share

Similar Questions

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• XT720: Unable to connect to the network for upgrades

  Hello

  I recently had a new Motorola Milestone XT720. I tried to get the software updates using the "connection to phone" functionality system updates. If I connect my phone via the network or via WiFI, I get this message "the device is unable to connect to the server, please try again later"

  How can this problem be solved?

  How to get the system through files zip for Android updates?

  Kindly let me know.

  It is not uncommon to get this message when checking for OTA updates - update servers seem to be pretty random that they are actually on and accessible, or not.

  Your best bet for checking updates is to use the Motorola (MSU) software update. Search on a site of Motorola to find. It is a windows program that will check updates for your phone. More updates appear here before OTA (if they are already on OTA)

• Unable to connect to the network - Windows 7 on Windows Server 2003

  original title: Six Windows 7 computers running on a network (Server Windows 2003 R2 Standard Ed) would not connect to the network in the morning, startup repair is unable to repair

  We have 10 PC running Windows 7 on a network (Server Windows 2003 R2 Standard Ed) and 6 of them started up the Start Up Repair screen the same morning. Run startup repair but then received the message "Startup Repair cannot repair.

  Windows could not start. A recent change in hardware or software may be the cause. Startup Repair cannot repair.

  Details of the problem: event name offline Startup Repair

  Signature 01 6.1.76.00.16385

  02 6.1.76.00.16385

  unknown 03

  04 21200896

  AutoFailover 05

  2 06

  07 0x6b

  OS version 6.17600.2.0.0.256.1

  Locale 1033 ID

  In the details to diagnose & repair was the only entry that indicates a problem

  First cause is parameters 6 unknown error checking b 0 x 0, 0x0, 0x0, 0x0

  In all cases the system restore worked but had to come back a week, him the day before restore point would not work.  In one case, the problem is that system restore and the next day does not, eventually reinstall.

  Clues or tips as to what has caused this?

  Kind regards

  GinSeek

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads/

  Above links are for server communities.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect to the network because the parameters of the computer do not match the requirements of the network.

  The main computer in my house is connected to the web via a modem to our ISP (Cox).  We use a Cisco's Linksys wireless router.  We have configured a new laptop to connect through the router yesterday.  Now my laptop, which had been the connection very well, can't access the network.  When I go in the "network and sharing Center" and pull up nearby wireless networks, our network shows is even more bars, just a red X.  Reads the error message "unable to connect to this network because the settings of that computer to match the parameters required network.»

  I don't know what has changed on our network, but I was unable to understand what these "required parameters" are, so I was unable to change the settings of my laptop to match the requirements.  Pls help.

  Hi Sharpdale,

  Step 1

  I first suggest you to perform network troubleshooting in Windows 7 and check if it finds problems, and if he is able to fix it.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Step 2

  Use Windows to configure wireless settings and check if it helps to solve the problem.

  a. click on Start menu and select run

  b. type ncpa.cpl, and then click OK to open the menu of the network connections.

  c. Select your Wi - Fi connection service and choose the option change settings of this connection.

  d. go to the wireless tab and select (tick) labeled use Windows to configure my wireless network

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Satellite L40: Windows Vista unable to connect to the network

  My Satellite L40 laptop was connecting to my network wireless perfectly since Christmas. But two days ago, it stopped! I can see the networks available on the laptop but when I try to connect I get the message "Windows cannot connect to the network. Following the link to "Diagnose the problem" has no useful effect.
  I installed Windows Vista Service Pack 1 yesterday to try to solve the problem, but always without success.

  Any advice would be appreciated.

  Select this option.

  Hello

  Please go to the drivers Toshiba download page and download the latest Wlan driver for your wireless card installed, then remove the old driver and install a new one. It should work.

  Otherwise, you should try to recover your entire system and replace the drivers installed by some more recent...

  Welcome them

• Dynadock U3.0 - unable to connect to the network

  I have a U3.0 Dynadock and when you try to connect to the network at work via a network cable, the parameters were not detected automatically.
  I then put manual details (IP), but this did not fix the problem.

  I assigned by DHCP the Dynadock should get a certain IP address.
  I still have a problem.

  In addition, when left on DHCP, subnet mask is 255.255.0.0 which is weird.

  Has anyone else had trouble linking their Dynadock to their network?

  I use a laptop another progress, running Windows 7, 64 bit.

  I found a solution.

  update to the latest version of the software available at toshiba for the dynadock solves this problem.

  software provided with the hardware is V6.1

  to solve the problem, it is necessary to download the toshiba support website V6.2.

  Also note, that windows 7 doesn't automatically recognize that this software update is available.

• Unable to connect to the network and network adapter is not detected

  Hello, this is the first time I use a laptop ( HP Pavilion 2332se g6 ) and I installed Windows 7 Ultimate 64 bit. I cannot connect to the network (wired or wireless) and cannot connect to Wi - Fi.

  My problem is perhaps the same problem in this post in your forum, so I provide the same information. If it's not the same problem, ask the details you need.

  What I see in device (with hardware ID) Manager:

  • Other features:

  Bluetooth controller:

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3298 & CC_0D1100

  PCI\VEN_1814 & DEV_3298 & CC_0D11

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C & REV_O5

  PCI\VEN_10EC & DEV_8136 & SUBSYS_183E103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  Network controller:

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3290 & CC_028000

  PCI\VEN_1814 & DEV_3290 & CC_0280

  PCI device:

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_183E103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  PCI Simple Communication controller:

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_183E103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  SM Bus controller:

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C & REV_04

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_183E103C

  PCI\VEN_8086 & DEV_1E22 & CC_0C0500

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  (USB) Universal Serial Bus controller:

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_183E103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Unknown device:

  ACPI\HPQ0004

  * HPQ0004

  Hello:

  First install the chipset driver and reboot (will install the SM Bus controller).

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103010-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Second: Install the AMD graphics driver and restart.

  For switchable graphics in your notebook, you install only the driver AMD, which installs the drivers for the AMD and Intel for the graphical configuration has your laptop. NEVER install the Intel driver only or allow updates to the Intel graphics driver to install.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-111285-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Third: Install the audio driver and reboot.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-104672-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Now, the rest of the devices can be installed...

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102604-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Network controller

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_119873_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Bluetooth controller

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_113004_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  PCI device

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102497-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  PCI Simple Communication controller

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102566-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  (USB) Universal Serial Bus controller

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102571-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

  Unknown device

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-116584-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5278311 & sw_lang=.

• HP ENVY 15-k163cl: HP ENVY 15 updated to Windows 10, now unable to connect to the network

  I've recently updated to Windows 10 with my laptop (from Windows 8) and remember, Windows 8 was working fine but now that I've updated for Windows 10, I can't connect to my home network.
  
  When I turn on my laptop, it is not automatically connect to my network and when I try to connect from the network settings, I get an error "Could not connect to this network" and I have to wait at least 30 minutes before it automatically logs. After waiting that it works, but my laptop goes to sleep or goes inactive for awhile, it disconnects again and I have to wait
  
  I connected via hotspot and it worked fine, but all of my other computers laptops HP connects very well and they are 10 Windows as well. Only this laptop is upward, so I guess it's a problem with a new driver.

  Hello:

  The only suggestion I can offer would be to install the latest driver for the Intel Dual Band Wireless-AC 3160 adapter - 802.11 and see if that helps any.

  The 2nd driver on the list is W10 x 64.

  https://Downloadcenter.Intel.com/download/25513/Intel-PROSet-Wireless-software-for-Windows-10

• error "unable to connect to the network hidden.

  Hidden in my own home network

  I have 2 laptops. I can connect to the network wirelessly fine with 1 laptop. But the 2nd laptop says cannot connect to the hidden network. HOW CAN I VIEW IT?

  Hi WendellXD,

   
   
  1. who is the operating system installed on the computer?
  2. it worked earlier?
  3. have you made changes to your computer recently?
  4. What is the brand and model of your computer?
  5. you try to connect to the network through wired or wireless?
   
  I suggest you follow the link and check if it helps.
   
  Windows wireless and wired network connection problems

   

   

• Unable to connect to the network of 5 GHz N SL510

  I have laptop Thinkpad SL510 and DD - WRT flashed router Netgear WNDR3300. The laptop can connect to the network when it runs at 2.4 GHz, but when I slide to 5 GHz N-network, the laptop does not see. Is it because SL510 does not support the 5 GHz or I have a problem with my setup? Laptop is running Win7 64 bit with all updates installed. I use Lenovo cordless tools to connect to find and connect to wireless networks.

  Thank you.

  This card does not support the 5 ghz of bandwidth.

• Unable to connect to the network in an OS Win 7 comments when the cable disconnected

  Hello

  I have a Win7 x 64 host with Workstation 7.0 executes 2 guests - is also a Win 7 x 64 and the other is a Win 2003 R2 x 86. Both work quite well when I have a cable plugged into the host network, but when I unplug it, the Win 2003 comments always connects to the network local vm end (for example I can ping the host and I have a correct IP address with ipconfig) while the prompt of Win 7 says "unidentified network".

  I have something special for the networking of comments (or even the host by the way) and that the guest Win2003 worked 'out of the box"that makes me think that the Win7 to work also with some small configuration changes somewhere - someone can help point me in the right direction?

  See you soon

  Dan

  If both are NAT, both should have the Internet connection if you have removed the cable, because NAT virtual network connects to each host TCP/IP stack.

  Are you sure? It really sounds like a bridge and the other is NAT. If you unplug the cable from the network status of the guests should not change. If in doubt, post the two guests .vmx files.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Unable to connect to the network, Inspiron 6400, Win XP Pro

  Hello. I have a laptop Inspiron 6400 with Windows XP Pro and cannot connect to the local network and thus to internet. The problem appeared after I took the laptop with me on a trip. I don't know if I hit it too or maybe changed a setting that I should not have. The only relevant thing I can remember is that I tried to connect to a wireless network, but totally failed. So now I'm back home and cannot connect to my network (not wireless), even if the icon on the computer says that it is connected to the network and works fine, then the function 'fix' there was no help. Other computers connected to the same router doesn't have the same problem. The laptop is not reachable from the other computer, and vice versa.

  Here is the ipconfig information:

  Windows IP configuration:
  The host name...: (who cares, right)
  Suffix main DNS...:
  Node... type: hybrid
  Active... IP routing: Yes
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
  The connection-specific DNS suffix. :
  Descrtiption...: Broadcom 440 x 10/100 Integrated Controller
  Physical address: 00-1D-09-BE-2A-B5
  DHCP active.... : No.
  ... The IP address: 192.168.0.1
  ... Subnet mask: 255.255.255.0.
  ... Default gateway:

  Ethernet wireless network connection card:
  State media: Media disconnected
  ... Description: Dell Wireless 1390 WLAN minicards
  Physical address: 00-1F-3A-11-2D-61

  So, I would be really happy if someone could tell me what is the problem...

  
  

• Unable to connect with the network via iphone or ipad

  Unable to connect the Apple TV (2nd generation) with the network via Wi - Fi using the remote app!

  The remote application required the devices to be on the same network, and home sharing enabled on Apple TV. The physical remote control would be necessary for the installation if this has not been done already