Unable to connect to the printer via ThinPrint error: "serial0: unable to connect to the virtual printer daemon after 25 attempts." The device will be disconnected.

Similar Questions

• series 0: could not connect to the printer virtual daemon after 25 attempts

  I get the error message that the virtual printer daemon can't connect whenever I start the guest system and I can't get my printer to work from Windows.  He used to work when I first set up my VM.  Any suggestions on what this means and how to fix it?  I'm on Mac OS X 10.5.6 on a MacBook Pro and have Windows XP Home Edition on the virtual machine.  Also, when the printer works on the virtual machine, it still required me to disconnect, and then reconnect the USB connection to make it work.

  If you Search the forums for "Failed to connect to the virtual after 25 attempts printer daemon", the first result from that moment is Re: unable to connect to the printer via ThinPrint error: "serial0: unable to connect to the virtual printer daemon after 25 attempts." The unit will cut'. In this thread, mudaltsov follows the problem down to one/etc/printcap needless - move which should solve the problem.

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• the device has been disconnected or is not available

  I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.

  Help, please!

  Currently, my version of the MacBook has been OS X 1 10.11.4

  its MacBook Pro OS X 10.11.4

• What are the devices will be extensible to OS 5.0?

  Now that the OS 5.0 JDE Beta is out, I wonder when I'll be able to start using it. The question for me is what are the devices will be extensible to OS 5.0? I'm mainly interested in the enterprise space (upgrade via BES?), but the consumer (updates through carriers?) space is also interesting.

  I have not seen instructions update. Have I missed them?

  I think the 8700 to pearls later devices are extendable to 4.5, that this includes:

  8700,

  all Pearl 81xx

  88xx

  83xx

  As far as I know, there is no support 4.6 or later version for these devices.

  4.6 devices and later versions include:

  Flip 8220

  "BOLD"

  Storm

  8900 curve

  Hope this helps

• Being new to such things, I designed a web site to read on a computer. If I make a Tablet and a mobile design I need different URLS for them on the same site or the devices will be able to open those instead of the computer?

  Being new to such things, I designed a web site to read on a computer. If I make a Tablet and a mobile design I need different URLS for them on the same site or the devices will be able to open those instead of the computer?

  Muse deals, each device uses the correct layout. You n ' to do anything, except to create the respective pages.

• Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

  Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

  Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

• printer and files of the device will not control panel open

  I have problems with a HP Officejet 5600 307N.  Unable to get printer and folder of device to load from Control Panel.  Any suggestions?

  Open the command prompt

  type in
  net stop spooler and press enter
  then type in
  net start spooler and press enter
  Then, go to the Printers and devices folder.

• Everyone knows the drivers of the device will not work after calling Camera.getCamera () so many times?

  Using Flash Player on Windows machines, since the Flash Player 11.4 version - Flash Player 15 (ActiveX version) and every version after that we had a problem in which Hauppauge PCIe and Videology cameras or other non-standard devices it does not work with Flash Player after calling getCamera() so many times. For example, we get the camera and publish a netstream for 10 minutes, then we have the camera set to null. Later, we call the camera again and after doing this 25 times or 100 times, the camera driver just seems to fail, and Flash Player is as is the streaming of the camera, but the NetStream info indicates zero-byte data video aired by indicating that there is no pixel coming from the camera.

  Someone else knows this problem to where you need to restart the browser or the Windows for Flash Player process power getCamera() properly again?

  Yes, it seems that others have experienced a similar problem. Adobe has not yet confirmed that it is a bug, but it is followed here:

  Bug #3850401 - handle with video.attachCamera leak leading to the unusable device

• virtual serial port (offered by a USB device) may not be reopened once the device has been lost and reconnected

  To connect to a virtual serial port offered by a USB device.
  -Physically disconnect the device (disappears from the entry in Device Manager)
  -Reconnect the device. (It reappears in the Manager of input devices)
  -Close the file handle
  -Reopen the virtual serial port. --> the CreateFile() call always fails with "ERROR_FILE_NOT_FOUND".
  -After dis - / reconnect the USB device once, the serial port can be reopened

  Even the true return of GetDefaultCommConfig there yet in CreateFile().

  It is clearly bad habits, because in our case the disconnection/reconnection occurs due to a restart of the device; and it's quite embarrassing to explain buyer for the disconnect/reconnect the device.

  Is there another workaround solution to clean the window's internal data structures or show me how to open the port?

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

  http://social.msdn.Microsoft.com/forums/en/categories/

• How can I have a show of name (Harry, phone etc.) device upward in the "devices" section of the Capsule of time instead of the IP address of devices?

  How can I have a show of name (phone Harry, etc.) the device upwards in the section "connected devices" AirPort app for the iPhone and iPad utility?

  Sorry, not the answer you were looking for... but you can not... at least not reliably.

  It's pot luck whether the real device name will be displayed, the IP address assigned to the device will appear. or the MAC address of the device will appear.

  Apple still has not corrected it after many years.

• My computer is no longer automatically recognizes all the devices inserted in the disks.

  My computer is no longer automatically recognizes all the devices inserted into readers, like a CD or SD card photo. Recently I bought a micro sd card for my phone, but when I insert in the USB port, it recognizes that no more. How to do that everything works again. I have XP Service Pack 2

  Hi Danny Bralski,
   
  -Did you change on your computer before this problem?
   
  Follow the steps listed in the order.
   

  Method 1: Check if the USB port is defective.

  If you connect a USB device to a defective port, the device will not work. Try connecting the device to a different port. If all USB ports are in use, disconnect one of the other devices and plug the problematic device into that port.

  Method 2: Check if there is a problem with the device.

  If you have another computer that is working properly, plug this computer to see if you encounter the same problem. If you have the same problem, there could be a problem with the unit.

  If you believe that your device is defective, contact the manufacturer.

  Method 3: Run the troubleshooter from the link given below:

  Hardware devices do not work or are not detected in Windows

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Service error battery Bluetooth connection problem and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device ".

  Original title: Bluetooth connection problem

  I have a bluetooth Jawbone headset which worked fine with my Dell studio 1458 until a month or two ago. I am running windows Home premium 64-bit. Now the device will connect is more to the laptop. I get an error to the stack service and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device"I returned to you can restore point, but the issue is not resolved. All solutions?

  Hi Trainfan1,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Check the drivers and the Bluetooth Support service.

  (a) click Start, type services in start search box and press enter.

  (b) Services for window open find Bluetooth Support Service and double-click it.

  (c) ensure that the service is both the value Automatic for Startup type and started for the State.

  (d) click Start, type Device Manager in the start search box and press enter.

  (e) to search for the Bluetooth device expand it and double click on the driver.

  (f) go to the tab driver and click set to update driver to update the drivers.

  (g) if the problem is still even try to Uninstall and reinstall the drivers in the same tab by clicking on the option Uninstall .

  Method 3: Remove all Bluetooth components and reinstall it from the manufacturer's Web site.

  Install all necessary software required for Bluetooth device work properly.

• Can not access the device memory or the SD card

  My app (9500) allows users to select a file from the device memory in the device or SD card. As a base, I used the FileExplorerDemo code that was included in the sample applications. My application seems to work fine on the Simulator, but not on a real device. For those who do not know the FileExplorerDemo he builds the list of directory as follows:

  Private Sub readRoots (root of the chain)
  {
  _parentRoot = root;

  That is clear in the list.
  _list. RemoveAll();

  FileConnection fc = null;
  Enumeration rootEnum = null;

  If (root! = null)
  {
  Open the file system and to obtain the list of directories/files.
  Try
  {
  FC = (FileConnection) Connector.open ("file:///" + root);
  rootEnum = fc.list ();
  }
  catch (Exception ioex)
  {
  }
  Finally
  {

  If (cf! = null)
  {
  Everything is read, be sure to close the connection.
  Try
  {
  FC. Close();
  CF = null;
  }
  catch (Exception ioex)
  {
  }
  }
  }
  }

  It has no root to read, so now we read the roots of the system.
  If (rootEnum is nothing)
  {
  rootEnum = FileSystemRegistry.listRoots ();
  }

  Read the list of directories/files.
  While (rootEnum.hasMoreElements ())
  {
  String file = (String) rootEnum.nextElement ();

  If (root! = null)
  {
  file = root + file;
  }

  readSubroots (file);
  }
  }

  I tried to change the "file:///" "file:///SDCard" and "file:///SDCard/Blackberry" as I saw in some messages here, but I get an empty list. All permissions are set to allow. When I connect the BB I see 2 devices on Windows Explorer: 'Blackberry1' and 'Blackberry2 '. I would give to
  give the user access to these 2 drives. Basically, I'm trying to recreate the functionality of the media browser.

  So I'm pointing to the root of evil or something?

  'file:///SDCard/' must be correct.  Make sure that if you test this with the USB cable connected have you turn off mass storage Mode.  The file system may be exposed to more than one OS at a time.  Basically, if you see the drive letters on the PC, the device will not have access to it.