Unable to connect to the router (even after reset)

Similar Questions

• WRT160N v2 site blocking to the router even after reset and upgrade firmware

  For some reason any my WRT160N v2 router blocks access to the following Web site: www.cngoons.com

  I can connect on the site if I connect to the modem directly, or using the connection to the internet of someone else. However computers that connect through the router is unable to access the site via a web browser (IE, FF or Chrome), cannot ping the site, and a tracert also fails.

  I have reset the router by default, but the site is still blocked. I've upgraded to the latest firmware (WRT160Nv2_v2.0.03.009_US_code.bin) and the problem persists.

  Any ideas on what's going on?

  And after a search even more, I found this old thread dealing with the same question:

  http://homecommunity.Cisco.com/T5/wireless-routers/Linksys-router-blocked-website/TD-p/12917

  A solution is given at the end to change the MAC address of the router (I cloned MAC address of my PC), and then restart the cable modem. It worked for me!

• EA6500 unable to connect to the router after Time Machine

  Just got an EA6500 - updated to the latest firmware available.

  I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

  Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

  At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

  Anyone else have the issue?

  Any ideas on how to solve it?

  Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

  "When in doubt, try to turn the grid and the.

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• Unable to connect to the router

  -Please ignore this message: I did not wait enough to do the factory reset. It seems that launch a factory reset without waiting for 10 seconds only restarts the router.

  Hello

  Today I tried to connect to my router (I do not use it for a few years) and it didn't work at all.

  Initially, I plugged it in just 2 RJ45 cables: one for internet, one for the PC. The computer could not connect to the router (DHCP failed).

  I then restored the factory settings and tried again: same thing, the computer could not find the router via DHCP.

  I tried to force an IP address (IP: 192.168.1.5, mask: 255.255.255.0 Gateway: 192.168.1.1).

  By forcing the INVESTIGATION period, I was able to connect to the router, but when I tried connect to 192.168.1.1 with admin/password, it wouldn't let me (bad password - don't forget I restored it to factory settings, several times actually). The address http://routeurlogin.net/ is not found (404) and I was unable to go on websites (404). A curious thing is, using this connection, I was able to connect to Skype (and send/receive messages), although the sites Web could not be reached from a browser.

  I'm running out of ideas to solve the problem, but I suspect a hardware problem, so any help would be welcome.

  Yes he did.

  I couldn't find an option to delete my message, otherwise I would have done it.

• Unable to connect to the router WLan - Satellite L300D

  Please help me so that I have still a few hairs left!

  I installed WLAN driver on my laptop Satellite L300D with Vista Home installed.

  I see my network in the available connections, but when I go to connect, it will not connect.

  My other two desktop computers can connect to the router without a problem.

  Any suggestions?

  Thank you
  Neil

  Hello

  I think that you didn t try updates. Right?
  Therefore, my first recommendation would be an update of the BIOS and driver WLan.

  Check the current version of the BIOS that is available on your laptop. If the latest version has been released then update the BIOS.
  In addition, to download the latest WLan driver from the Toshiba WLan portal and to update:
  http://APS2.toshiba-tro.de/WLAN/

  On this Wlan site, you will find three different WLan drivers for three types of WLan cards. First check your wireless network card, and then use the right driver!

  See you soon

• Unable to connect to the router (BEFSR41 V4.0)

  I have a Linksys BEFSR41 (Version 4.0) wired router and I am not able to connect to it. It has been in storage (the top of a closet shelf) for the past two years and when it when it was still used it worked like a pro.

  I used the downloaded from the site Web of Linksys router configuration utility to install it, and when it gets to the final stage, he says that it cannot connect to the router. Try to go to 192.168.1.1 translates into a (very long) network timeout.

  I have reset the router several times (retained in the for more than 10 seconds reset button) and have had no result. All the lights on the front of the router work normally.

  I already checked and I'm set up to get the IP addresses of network automatically rather than assigning a static.

  Any help appreciated,
  ~ Darxide

  Number set by putting the ADSL modem in bridged Ethernet mode.

• Cannot stay connected to the network, even after replacing my old router.

  I have a laptop Toshiba Satellite L655 is one year old and its operating system is Windows 7 home Premium I have Comcast internet service and use a NetGear wireless router.

  Recently, about 2 months ago I got this router in Comcast, in replacement of my old 1. Why I asked that a new router was the former 1 had problems to stay connected to the internet. The problem persisted even with the new router so I look at it is not not a problem with Comcast or the router. I tried resetting the connection, the son, restart the router, diagnostics running on my laptop and are not yet able to resolve the problem. I run disc optimization, defragment the hard drive, run many virus / spyware scans and tried to disable startup programs as much as possible. This problem has frustrated me for months and I want to get it resolved. It sucks paying all that money for equipment and service and there not work directly without having to spend more money, which I have unfortunately not yet. Any help is very appreciated.

  Hello

  You can check this link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to connect to the router with windows 7?

  I have just bought an Acer Revo R3700 and installed Windows 7 above, but I can't connect to my router.

  My router is heaven and successfully has 4 laptops (both under Vista, two 7 running), an Xbox and a Wii and two smartphones connected to him. Yet I just can't do this system to connect to him.

  I'm at my wits end... I've tried absolutely everything. I searched the Microsoft answers site found several similar problems and tried a lot of solutions, including adding files in the registry and update drivers.

  At first I could connect to the internet every now and then, but it was biblically slow (I tried to download Google Chrome and got him to 0.2 Kbps) and soon disconnected. Now I can't connect at all.

  I just downloaded a the Ethernet controller driver and updated a driver WLAN as they apparently do not come with Windows, but it still doesn't work. Although the message has now changed to "Unable to connect" to "Limited connectivity" (even though I think it's more coincidence than anything else)

  It should not be a question of signal strength, like the Xbox and laptop computers work fine when placed next to her.

  Really needed a solution to what running an ethernet cable is not really an option :(

  Thanks in advance guys. I'll be happy to provide any additional details if you need it :-)

  EDIT: / / I would add that I seem to be able to connect fine with a phone as a hotspot? It is very very weird.

  EDIT: / / I just managed to connect, but its very slow and not changed anything for the last 100 times? Everything seems to be completely random when it let me? : S

  Hardware support comes equipment - including the drivers/software manufacturers to use such software in all operating systems.

  Looks like a possibly faulty hardware or shotty (the wireless network device.  Make and model)?

• Satellite A300D - unable to connect to the router

  I can't connect to my wireless modem that works correctly for other laptops at home.

  I bought this phone 2 weeks ago and when I discovered that it can not connect, I took it to the shop, I bought it. Here, surprisingly it connected to wireless internet so they told me that there must be sth wrong with my modem. I reinstalled my modem but still not good. I can connect with other laptops that have vista as well.

  I can view the connections. Sometimes, he tells me that the password is wrong that I'm sure I get right! I even tried to completely disable password security, then it seemed like it was connected, but I could not access Web sites, including google.com. Sometimes it is said that id verification timeout. I reinstalled the wireless driver that did not work. He has no problem with the connection to the local network. I almost tried everything but still can't connect.

  Help, please!

  Hello

  Why you try to reinstall the modem driver if you have a problem with your wireless network card?

  Anyway, if you can plug it into the router in the shop everything should set up and installed correctly on your laptop and the reason must be the router.

  So in your case, I would try to update the firmware on your router.
  If you use DHCP, try static IP addresses. Try to also disable filtering of MAC addresses and try another encryption, e. g. WPA2.

• Unable to connect to the router WUMC710

  I have a WUMC710 wireless bridge connect to a router, Asus RT-AC66U. The problem is that is no longer, it connects. The wifi LED on the front is not illuminated and in the interface web when you try to connect, it said treatment with a progress bar which is 50% and fails. It used to work fine then one day just stopped working. I tried to disable the firewall of the router, change of bandwidth and even try on another router with no luck. Can someone help with my problem? Thank you in advance.

  What wireless modes that you use on the router principal host?
  2.4 Ghz and 5 GHz routers: try Singlemode G or N or mixed G and N on 2.4 Ghz and single mode N or mixed on 5 GHz?
  Width of the channel to Auto 20 / 40 Mhz or try 20 Mhz only.
  Try to set a manual channel to a channel open or unused. 1, 6 or 11. 11 for Singlemode N if the channel is clear. 13 for the regions of the EU. Try the channel 48 or 149 on 5 GHz.
  http://KB.Linksys.com/Linksys/UKP.aspx?VW=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.XML&PID=80&r...

  What security mode are you using? Privilege 'egi' is WPA-Personal. WPA2 only.

  Temporarily disable WPA security and see if it connects.

  Doest he bridge connect to a 2.4 Ghz radio?

  Factory reset the bridge and set up from scratch...

  The bridge connects to a different router?

  Reset the bridge, reload the file FW, the factory reset and the whole upward from zero...

• Unable to connect to the Internet automatically after the restart with Linksys WAG 320n

  We have a problem with Linksys WAG 320n router that after rebooting the router it does not connect to the Internet automatically.

  instead I required to connect manually by clicking on State-> Connect.

  As previously he was showing server status DNS IP addresses, now it does not appear after connecting also.

  "" Could you let me know wheather miss me an option to automatically connect with LAN "' after reboot or anything else the cause.

  Thanks in advance.

  Thanks guys...

  After changing some settings wireless - bandwidth to value 'Standard' and MTU change, its done!

  Finally, the problem has been resolved. Now I can connect automatically when I restart the router and display the DNS IP addresses too.

  Thanks once again for most people trying to help me.

  I have another question and I would like to post separately instead of mention here.

• Unable to connect to the router EA6500

  I just bought the EA6500 last week. Had to RMA on Monday and got the new today. The problem persists. The power light flashes constantly and my computer does not obtain an IP address from it. I contacted technical support and could not get the problem solved so I had exchanged them it believing that it was defective. The other did the same thing. When I connect my computer, the light on my rest Ethernet port a solid orange instead of green as it does for my usual router. The Cisco constantly flashes. I would really like to help in this question, because I doubt that I had received two defective routers in a row.

  Hi Shentok,

  You can try the steps ff

  * Download the latest firmware for the EA6500
  * Download the upgrade utility, http://support.linksys.com/en-us/support/routers/BEFW11S4 . Choice hardware version 3.2 and who says utility download

  * And then connect the computer to the router (do not connect the modem again, while doing these steps)
  * Set the static IP address on your PC, such as 192.168.1.100
  * Ping the router, if you can get reply from her, then you can perform the upgrade
  * Run the utility
  * Server: 192.168.1.1
  * Password: admin
  * If the upgrade will be successful
  * turn off the router for 2 minutes after that, power on the router, then wait the powerlight stay strong
  * Once its solid, set the computer back to DHCP
  * Check if you can get an IP address from the router, if you can, you can now try to access the user interface of the router.

• Portege 2010 PP201E - unable to connect to the router encrypted with WPA

  Hello

  I just bought a Toshiba (? 2002) Portégé 2010: PIII 866 MHz/XP... Part number: PP201E-00GPP-EN. support for the Wi - fi network: 802. 11 b

  When I try to connect to the internet using my sky router (WPA / PSK) my Toshiba does not connect because it asks for the WEP.
  I tried to change it on Assistant, but that's it or turn it off.

  I have only one option is to change the router WEP, but I heard it is an old and easily hackable, technology
  In any case, I don't want to mess with my router, another PC wireless and my playstation.
  I looked on update of the driver toshiba but that did not work.

  Does anyone know if there is a updated for my lapptop driver or do I have to buy a USB product?

  Thanking you

  Hello

  Maybe the internal WLan card does not support the newer WPA encryption but only the WEP key.

  The fact is that encryption is hardware related. This means that an update of the driver will not help you. If the hardware does not support WPA, then you need to replace the WLan card or buy a USB WiFi dongle that supports WPA.

  I have thin external USB WLAN key is the easiest solution

• Unable to connect to the college network after installing Vista business on Satellite A215

  I have a Satellite A215-S4757, which I brought with me in College, I was told that the server of the College has a problem with vista home, which is what I currently the wireless is down, so after installing business and plug in the ethernet cable, my laptop does not collect several wireless networks available, or otherwsie

  What to say that you can also access the network using Vista.
  But please note that the Vista operating system supports additional network access security settings that should be disabled or reset.

  How this site published by Microsoft should help you set up the network with Vista settings:
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

  Here are several tips:
  You should try to open Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair.

  Vista supports additional firewall options. Please disable all trying to connect to the server.