Unable to connect to the Web site of 'report a problem '.
I'm having a strange problem signing on the Web page 'Report a problem' in order to report a problem with an application that I downloaded via the iTunes store. I went to purchase in the iTunes store on my computer, click report a problem for the application in the order and he took me to a Web page called 'Report a problem' and asked me to connect. However, I enter my information and click on connect, but the page just refreshes and doesn't connect. I know that my sign in information is correct (in addition to using it in iTunes, I just used to login here to post this question) and I came many times to just in case there was a typo in with my password. I tried a longer password and it gave me the error "your AppleID or your password was entered incorrectly" so he is grateful to my info... I tried to clear cookies and cache from my browser (Chrome). I also tried to use Internet Explorer and Edge to connect, but both had the same problem. I couldn't even find a way to contact Apple on this specific problem... their support menus not occurred for problems of website that I could find at least (if someone could point me to that, I can try that as well).
I had no problem connecting to https://reportaproblem.apple.com/ earlier. A temporary glitch perhaps?
TT2
Tags: iTunes
Similar Questions
-
Laptop has virus and still unable to connect to the Web site after his withdrawal.
Original title: laptop cannot connect to router
my daughter portable computer had bankerfoxa virus I think that I got rid of but she still can't connect on the website I want to download microsoft security essential on his cell phone how if I can not connect? pls help
Also try the following steps, you have a problem connecting to the Web sites.
Try to do a System Restore to an earlier date when your computer was working well and try to run a scan for malware removal.
Try to reset the Proxy settings to connect to the internet, as some malware enable proxy settings that block your ability to browse Internet sites.
To reset the Proxy settings:
Click Start-> in "search programs and files" type CMD-> in the programs in the list right click CMD and click 'run as administrator '.
In the command prompt, type the following and press ENTER:
NETSH WINHTTP RESET PROXY
Restart the computer
Touhami
-
Can anyone help?
Now, this is getting very frustrating.
I can connect to the internet and browse most Web sites. My email works fine but I can't connect to websites www.microsoft , Norton is 'unable to connect to the Live Update server, check the internet connection' and my media center can't find my internet connection.
What is going on?
I have a subscription to Norton who can't find any problems. I also downloaded onecare and trojan remover, returning with a clean report.
Please help before I go out what remains of my hair.
What about FrankHello
You can access Microsoft.com, McAffee.com, Symatec.com? Thinking you have a conficker.
Check with this site
http://www.confickerworkinggroup.org/infection_test/cfeyechart.htmlAlert on the Win32/conficker virus
http://support.Microsoft.com/kb/962007Protect yourself from Conficker
http://www.Microsoft.com/security/worms/Conficker.aspxHow to remove the worm Downadup Conficker (Uninstall Instructions)
http://www.bleepingcomputer.com/virus-removal/remove-Downadup-ConfickerHow to manually remove the Conficker worm
http://www.411-spyware.com/Conficker-worm-removal#how-to-removeBDTool to remove
http://www.bdtools.NET/-----------------------------------------------
Run the malicious Microsoft removal tool, scan with Malwarebytes, Prevx to be sure you know all the
malware involved and if necessary use UnHackMe.Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows Update - if necessary, you can download it here.
Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
(Then run MRT as shown above.)Malicious removal tool from Microsoft
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMalwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
http://www.Malwarebytes.org/Here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1also install Prevx to be sure that it is all gone.
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------
Also do to the General corruption of cleaning.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------
Run Malwarebytes when you can.
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK
Close IE
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question. (Toolbars are BHO)
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlDon't forget to do:
Logon as administrator
Start - type in the search box-> COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN
Enter each of these one at a time and press ENTER after each
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
Reset
------------------------------------------------------Here are a few rootkits if it were a question:
SpyDLL Remover - free
http://securityxploded.com/spydllremover.phpAdvanced Windows Service Manager
http://securityxploded.com/winservicemanager.phpRun the Rootkit Revealer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb897445.aspxUnHackme - trial
http://www.Greatis.com/UnHackMe/This shows how to use UnHackme and includes a link to version 2.5 – use it as a guideline and current
available as version above is 5.5
http://safecomputing.umn.edu/guides/scan_unhackme.htmlIceSword - free
http://www.AntiRootkit.com/software/IceSword.htm
Instructions and pictorial
http://securityxploded.com/IceSword.php
Tutorial for use of IceSword
http://translate.Google.com/translate?hl=en&SL=zh-CN&u=http://soft.zol.com.CN/2004/0803/145163.shtml&prev=/search%3Fq%3Dicesword%26hl%3Den%26lr%3DRevo Uninstaller - free
http://www.revouninstaller.com/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Unable to connect to the Web site
I can get www.calphalon.com to load but am unable to connect. When I created the account, calphalon did exactly the same thing ebay-t - it does not recognize the security code even if it is correct. I did exactly what I do on Ebay when I ask a question to a seller - I use Internet Explorer. You have created calphalon account no problem and am able to sign in and out of my account without any problem with IE, but when I switch back to FF (updated 22), this is a go. With FF, the sign of the popup box is much too small and is completely empty. When I go to the tab of the client service to register a product (this is why I am on the site), I filled up on the sign in info on the page and the kickoff, nothing happens. It's as if I never hit the Send button. It does not seem to convey anything at all. I have signed up for newsletters, but cannot access my account on ff so it seems I'm going w/IE when I get on this site.
Hello
Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
Note: This will be you temporarily disconnect all sites, you're connected to.
To clear the cache and cookies to do the following:- Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
- Under "Time range to clear", select "all".
- Now, click the arrow next to details to toggle the active details list.
- In the list of details, see the Cache and Cookies and uncheck everything.
- Now click the clear now button.
More information can be found in article to clear your cache, history, and other personal information in Firefox .
This solve your problems? Please report to us!
Thank you.
-
Unable to connect on the web site or web mail
- Hi all, my main site named: www.amolmap.com/ and several days I can log my site and my webmail.amolmap.com and need help and support.
Hi Mr. Reza,.
It is most likely not a problem of malware on your end.
Please contact the technical support for the company that hosts your Web site. It probably is a problem, if everything else works.
Good luck!
Kosh
-
Unable to connect to a Web site? used several times before. says the dns server is incorrect or does not exsist? help someone?
If it is hosted by GoDaddy, it's maybe out of service. There is a DDoS (denial of Service) attack to GoDaddy for the moment.
You could try again later and see if it returns. -
Unable to connect to the web services server
Unable to connect to the web services server. It is a common error that you might see if you try to enable web services. If you receive this message, try the following steps.
For Officejet printers
1. open the internet browser type printer IP address.
2 should bring you to the status of the printer page.
3. Select the tab network at the top.
4. left side select IPv4 under wireless.
5. under DNS address Configuration select manual DNS server.
6. for favorite enter 8.8.8.8
7. for alternate enter 8.8.4.4
8. Select apply. You can get a warning saying that this could break the connection which is very good.
9. turn the printer off for about 30 seconds and then try to enable web services.
For Photosmart printers
1. Enter the printer's IP address in a browser.
2 Select the network at the top of the page.
3. on the left, select network.
4. Select Network (IP) address
5. select manual DNS server
a. manual Preferred DNS should read 8.8.8.8
b. alternate DNS server should read. 8.8.4.4
6. Select apply you could get a fair warning select OK
I hope this helps!
-
Unable to connect to the web proxy/services
Unable to connect to the web proxy/services used for officejet pro 8600 as well as using verizon fios actiontec router. I tried wireless and ethernet. Connectivity seems good.
Resolved. Port forwarding blocked by another application of verizonwebcamera problem.
-
Unable to connect to the web.
I have an Inspiron One 2305. Yesterday morning, everything was fine. Before noon I couldn't connect to the web. The network connection shows that I am connected. I always get an error "unable to connect to the page. I ran anti-virus and malware. Still nothing. Do a system restore I can connect on a single page. Try to leave this page and I get the same error. Can someone give me an idea?
At this point you can repair or reinstall Win 7. Make sure that all of your personal files are stored on a medium firstexternally.
To do a repair, you will need your reinstall Dell Win 7 drive. Start with a hard disk check
- Click Start > run
- Type: chkdsk c: /f
- Click OK
- Accept offer to run chkdsk at the next startup, and then restart. CHKDSK runs before Windows loads. Be patient as this can take some time, depending on the size of your hard drive.
Unlikely that chkdsk will solve the network problem, but check it anyway...
Then run a check of Windows system (CFS) files:
- Click Start > run
- Type: sfc/scannow
- Click OK
- Insert the Dell Windows reinstallation disc, if/when requested
- Restart when done
- Check again networking
If this does not help, make sure that your files are backed up! Restart, and then press F8 before Windows loads. Look for the option of repair that may be on an advanced options menu. Follow the prompts. See if that solves network problems. And don't forget to visit the Windows Update site and reinstall all updates that are missing after the repair.
-
Since the update of Firefox for windows 10 I cant get onto certain websites.
All I get is the error message. Tried removing Firefox firewall and adding back on. Don't agree.
Never had any problem until I updated. I have triewd the removal of Firefox and download again. Still not good.
Disabled extensions and Add ons still no joy.
Anyone know why this is happening. Could be something simple, but I just don't find that.The secure connection failed
An error occurred during a connection to www.qrz.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the web site owners to inform them of this problem.
Hi, in case, you're an avast user, please try to disable https scanning in avast:
- Open the Avast dashboard on an affected system.
- Select settings in the left side menu.
- Adopt a Protection Active.
- Click on customize next to the Web Shield.
- Uncheck the option "Enable HTTPS analysis", and then click ok.
http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/
-
After installing an update on Friday morning, I am unable to connect to the HTTP site
I ran an update Thursday night and Friday morning that I was unable to connect to the internet. After a repair, it seems that I can connect to https and ftp sites, but I can't connect to non-secure http sites. I don't know if a setting has been changed or if there is another question. Thanks in advance for any help.
original title: unable to connect to http sitesI finished to restore on the eve of the update and everything works. I did it after trying the method 1 & 2 above. WinHTTP was not anywhere on the list of services and connections have been implemented according to the instructions. I hesitate to run updates until I know what caused the problem.
The browser is IE.
Here's the ID numbers updates which took place:
KB2618451, KB2618444, KB2544893, KB2564958, KB2592799, KB2619339, KB2620712, KB2624667, KB2633171, KB2639417, KB2633952, KB2641690 AND KB890830. -
Unable to connect via the Web client
Dear team,
Web customer service is installed on the SSO Server (SSO installed on seprate VM), since last year 1 it works very well, but as of today I m not able to connect through webclient get below error
https://SSO.test.com:9443 / vsphere client / #.
Unable to connect to the server vCenter Single Sign On https://SSO.test.COM:7444/ims/STSService? wsdl .
Note: I am able to connect VC via vsphere client but not to Web client.
concerning
Mr. VMware
After you restart the WebClient service, wait 5 minutes. Now, I m able to connect VC via the web client.
Thanks for all the help and support.
-
Unable to connect to the web interface TCS
Hello, I'm having a problem with a TC who left the factory of S5.3 current version. I can RDP into the Windows operating system without problem and access the web page of the OS on the port 8098 management no problem, but if I try to connect to the web application interface I get a name of user and password error. any IDE on what is causing the problem? the server was running fine until after a reboot. Thank you!
Hi Patrick, http:///tcs/#page:login&rescue:true method is used for the local administrator to log in if for some reason any when LDAP authentication is configured on TCS and local users cannot connect.
ARO
Mahesh Adithiyha
-
Unable to connect to the Web Client
Hello
It is impossible to connect to the Web Client. They receive the following error message:
Error RSL # 29
Error 2046We use vSphere 5.0 U3.
Hello
If please try kb article below and choose the right answer if it solves your problem.
Thank you
RAM
-
Unable to connect to the Web by HTTP site after viewing once it with HTTPS.
If I find a site with SSL (https). If later, I need to use it without ssl (http protocol) I can't, I am forced to use https. If you must know why it's necessary, it's because a Web site "https://example.com" ssl certificates configured properly, then that another site which is a subdomain "http://mysubdomain.example.com" didn't put certificates in place because it is hosted elsewhere. So when I try to connect to "mysubdomain.example.com" firefox forces me to use the https protocol, how the site does not load because it cannot offer me a page SSL version. The only solution I found is to delete all the temporary data of my browser and restart the browser. How I can use "http://mysubdomain.example.com", but if I ever go to "httpS://example.com", I can use only the subdomain because I am again forced to use the httpS Protocol.
Is it possible I can stop this behavior?It works for me.
https://addons.Mozilla.org/en-us/Firefox/addon/enforce-encryption/
Maybe you are looking for
-
How to restore the original partition after reformatting accidentally installing windows 10
See the problem below. I can not get a USB stick formatted with FAT to be recognized by bootcamp or to download the drivers to continue. The problem occurred after that my son wanted to re - install windows 7 after that that he has been upgraded to w
-
Erase content and settings, I forgot my 4 digit password
I would like to sell my camera and I want to erase content and settings, it asked me password to 6 digits I knew but then asked me a password 4 digit which I don't know or don't remember to have? What should I do? or how can I know what is the 4 digi
-
I can not enter in MSN and cannot get in emails.
E-mail address is removed from the privacy *. I changed my computer and now I can not enter email, hotmail or the butterfly and I signed up before on another computer for MSN, but I am now using this new computer. I need my access to e-mail and the
-
The system restore. I can't even to safe mode or a command prompt.
How should I do system restore when I can't even at a command prompt or safe mode. I tried to open using two techniques, but the computer crashes as drivers are loaded. all this happened after I had an automatic download of the latest updates of mi
-
Original title: non-functional computer my vista computer has ceased to be able to print or use the windows photo gallery, or to be able to run updates and I can't find any way to put this right - someone had something similar - it custom install ser