Unable to connect to the wired or wireless network.

Similar Questions

• WRT310N V2 - unable to connect to the wired LAN, wireless is OK

  I know that there are similar problems posted everywhere, but I can't seem to find the right solution. My WiFi works fine but cable did not see the router or on the internet. A few details:

  I can communicate between hosts and wireless on the router.

  The router assigns the IP both wired and wireless.

  The wired connection works on the laptop and wireless works on it, too.

  Wired does not work on the desktop, there is no wireless capability.

  Cable cannot reach 196.168.1.1, wireless can.

  I have updated the firmware of the router.

  I installed the latest drivers for the NIC.

  The office (cable) connects to the internet via cable modem, without going through the router.

  I have no firewall active or other security features.

  Same results with Firefox, IE, and Casimir FTP.

  I turned off, turned on, rebooted, changed the ports and everything else I can think.

  Here are the details of the ipconfig command:

  Microsoft Windows [Version 5.2.3790]
  Copyright (C) 1985-2003 Microsoft Corp.

  C:\Documents and Settings\Administrateur > ipconfig/all

  Windows IP configuration

  Name of the host...: topdog
  Suffix main Dns...: topdog.local
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: topdog.local
  KC. RR.com

  Ethernet connection to the Local Server network card:

  The connection-specific DNS suffix. : News:[email protected]
  ... Description: Intel(r) PRO/1000 MT Network Connection
  Physical address.... : 00-0C-F1-A4-82-50
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.101
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 192.168.1.1.
  76.85.229.110
  76.85.229.111
  Lease obtained...: Saturday, June 4, 2011 16:54:48
  End of the lease...: Sunday, June 5, 2011 16:54:48

  C:\Documents and Settings\Administrateur >

  The office is a Dell Poweredge, NIC is an Intel Pro/1000MT (on the MB), OS is Win 2003 small Bus. Server

  Please, ask/offer away. I am at a total loss.

  Thank you!

  Jeff

  I installed a new gigabit NIC $ 30 and all is well. The old NIC is circa 2002-3.

  Thanks for trying!

  Jeff

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Dell Inspiron 2650-system of operating Windows XP. I am unable to connect to the internet. Status: Network cable unplugged. Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  The network port is the port on the laptop (it is not that large - look around) that looks like a large phone connection.

  You have a router/network to connect to and a cable network to connect with?

  Look at the 'Network option' part of the poster:
  http://support.Dell.com/support/eDOCS/systems/ins2600/placemat1.PDF

• Unable to connect to the internet error unidentified network

  I have an acer w/Windows 7 and when I turn on the computer, it does not connect to the internet, it says unidentified network and does not connect. What are the options at this point? Modem provided by my cable company a Motorola 6580.  Now, if I unplug the modem and click on diagnose connection, it will connect not ultimately.  This however is ridiculous because I did not have to do when the computer is difficult in the modem cable.

  OT:Motorola 6580 - when I turn on the computer does not connect to internet

  All tips will help!

  Hello

  You did changes to the computer before the show?

  Method 1: update the network driver.

  Steps to update of network driver:

  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select the network card device and right click on it
  d. now, select Properties.
  e. in the Properties window, on the driver tab, click Update driver.
  f. after the installation of the updates, restart the computer.

  For more information visit: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Method 2: Try resetting the TCP/IP stack.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357 .

  If the same problem still persists, then try the next method.

  Method 3: Here, you need the problems using the network troubleshooter in Windows 7 and check for the issue to this follow the link provided below.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also: Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to connect to the drop folder digital network after the installation of the new wireless router

  I have already scanned to the folder of network of digital repository on a printer HP 8500 wireless, connected to a wireless G home network. However, I recently bought a new superisolants wireless router and am no longer able to use the scan function. I now get an error message that says: unable to connect to \\Computer\Folder Make sure the remote computer is turned on. The printer on the wireless network and works very well except for scanning to the folder of the network of Direct deposit. Thank you.

  I called HP tech support last night that had me add IP address of the printer to the McAfee Firewall as an approved connection. Digital archiving to the network folder scan function works now.

• Unable to connect to the Dell 966 wireless printer.

  Original title: unable to connect to my wireless printer

  My laptop is a dell running windows vista and I have a Dell 966 printer all-in-one. I can't have printer to pick up the signal from my laptop wireless. Im not to share the printer also. All the indicators are on my laptop and printer. I also have no ip and not the gateway ip address.

  Hi gus,.

  Than you for your message.

  "I can't printer to pick up the signal from my laptop wireless."

  You use a wireless router to share your network?

  "I also have no ip and not the gateway ip address."

  Is - with reference to the computer or the printer?

  "The question is my cell phone and my printer can not communicate. My printer does not have an IP address.

  You try to get the laptop to deliver the IP address of the laptop?

  I propose to move the printer closer to the network router to isolate the interference problems.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• New Designjet T520e unable to connect to the wired network

  I have a problem with a brand new Designjet T520e that can not connect to my network cable.  Said! No connection

  I can see the lights suitable for connectivity to the plug on the printer and on the switch.  Have you tried replacing it with cables and ports from the switch, the speed setting of port on both printers and spend 100 full instead of auto.   It connects to the wireless network, less desirable in this situation.

  All revelation?

  The cable was not the solution, but thanks fo RL suggestion.   support technique level 2 indicated that there is a problem with some of the T520 newest which will be fixed in an update of the firmware soon arrived.   In the meantime, they recommend a hard reset.

• Unable to connect to the internet, NVIDIA nForce Networking Controller issues

  The NIC 'NVIDIA nForce Networking Controller' experiences driver or hardware problems... the message that I get when trying to connect to the internet.

  In under 'Network adapters' Device Manager double-click your network adapter, in the, click the tab drivers, click on the button 'Disable', properties when disabled, click 'enable '.

  You can also try the "Uninstall" button to uninstall. Then on the Action menu click on "Scan for hardware cahnges ' of the reinstall.

• WRT610N: portable computers cannot connect to the 5 Ghz wireless network!

  Hello

  I have a Linksys WRT610N (material v1) router, and I have configured settings wireless for the range of 5 Ghz and 2.4 Ghz

  wireless network, but the problem is that my laptop (wifi compatible n) detects the 2.4 Ghz network, but is NOT the

  5 Ghz network.  I have no idea what the problem could be :-(

  Here is my setup :

  (5 Ghz) wireless network settings :

  network mode: only wireless-n

  network name (SSID): WRT610WiFi-N

  channel width: auto (20 or 40 Mhz)

  broad channel: auto (DFS)

  standard channel: auto (DFS)

  SSID broadcast: enabled

  (2.4 Ghz) wireless network settings :

  network mode: Wireless - g only

  network name (SSID): WRT610WiFi-G

  channel width: only 20 Mhz

  broad channel: auto

  standard channel: auto

  SSID broadcast: enabled

  Security on the two mode is 'WPA2-personal' and "WPA-TKIP or WPA2-AES" encryption

  But my laptop do the WRT610WiFi-G and not the other :-(

  Currently, I am a bit disappointed as you can understand, but I hope someone here can

  give me a solution for this problem...

  Best regards

  Chris.

  Fix. Should be a/b/g/n

• PhotoSmart 6520: unable to connect to the site w / wireless

  I recently had an unsolvable problem with my Photosmart 6520 involving his inabilaty to print photos.  It has now almost completely off.  I use it with my desktop (using WIN XP) and two other laptops in the House (the one with WIN 7, the other with 8)

  Last week, we noticed that it's no longer access wireless.  The two laptops showed that it among their devices, but he showed in offline mode.  After being unable to reset it online, I deleted the WIN phone 7 to to see if I could find him.  He is unable to do so.  The machine to WIN 8 had no better luck.

  I don't know if the two problems are related, and while I rarely print from the laptop, I'm worried that it may be symptomatic of a breakdown coming in the opposite direction.

  Earlier today, he gave a paper size mismatch message when I tried to run a normal report for the main tray.  I ran diagnostics on this topic and got to resume printing, but I see the smear of ink on the edges of a few leaves.

  The unit is a little less than two years.  Should I waive this subject, or is - this salvagable?

  Hello @PFR443,

  I understand that, as well as a print quality problem, you are also not able to print wirelessly with your all-in-one Photosmart HP 6520. Now, I previously working with you on the following thread: Photosmart 6520 refuses to print photos and had exhausted all efforts to solving the problems with you. In the end, I had to refer you to our queue of Technical Support for the hardware support that your product has met a hardware failure, from which it cannot recover from.

  Part of our troubleshooting was to run a semi Full Reset. We had done that on March 2, 2015. If you remember, this semi Full Reset resets all the settings of your printer. This includes wireless information. Therefore, the wireless feature will need to be reconfigured from scratch on your product. The printer should also be added to each computer that you use with to re-establish the wireless connection.

  If you still want to attempt to reconfigure and reinstall your printer wireless, I can provide you with these steps. But your product is defective. Therefore, things will continue to act on you until you get that fix the printer or replace it with another model.

  Please let me know if you want to continue troubleshooting wireless. I look forward to hear from you!

• 3 years old DELL P513w lost connection with the wired PC & wireless

  Back in Jan. 2010 I purchasea a Dell P513w printer. Since setting it up its been sitting in the other end of my PC room.
  

   It worked fine both wireless and whan the cable attached. It justsat there unused except for printing probably a couple dozen pictures since 2010.
  

   I just kept it there but had it covered with a dust cover. I had plenty of ink for my HP and Brother printers so I figured
  

   I would put it on line later. My Brother went kaput basically a couple of weeks ago so I dumped it and moved the DELL over near my pc. Re-installed the software because I had recovered the pc. I could not get it to work with wireless but it functioned ok with the USB connection. Suddenly it just quit. I have reinstalled the software on 2 pc's but it keeps telling me X no compatable printers are installed. I've tried 3 sets of cable and still nothing. Help I've hardly used this thing and havequite a bit of extra ink. It scans a d will print from flash disk or memory cards but not with anycommunication with the printer.
  

  I tried resetting to factory specs as advised from Dell support to no avail
  

  I did the removal of power nflea thing then inserted the CD that did not have the option you said when I opened it. I have therefore re-installed software that was already on it without removing it using the control panel. Once installed, he has begun to communicate with the PC and I have re = connect wireless also. I have a lot I was lost as to what had happened... I knew that the printer was working properly himself but not communicate. I've just never known what.

• 2000-2314TU HP: not able to connect to the LAN and Wireless network

  Hello

  I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?

  You are the very welcome.

• Connect to the printer via wireless network

  I have a hp photosmart 7760 connected to my main PC, which is connected to my home network.  This PC is Windows XP.  I just bought a new laptop running vista 64-bit.

  When I try to connect, it tells me that I have not install the correct driver.  I downloaded and installed the driver 64 bit vista from the internet, but it still does not work.

  What is work?     Now, I wonder if I need to install this driver on my main PC... and if yes, which ruin my ability to print from this PC?

  A big thank you to anyone who can help me.

  I tried the procedure described in the thread in my previous post and it works like a charm!