Unable to connect to the wireless network and also impossible to uninstall the network wireless driver

Similar Questions

• Unable to connect to the floppy USB drive

  I'm under VMWorkstation 8.0 in a Dell laptop and have an attached USB floppy drive, I have the floppy drive to automatically detect (the physical single available setting) but I can't connect to it.

  I also tried to connect to a *.img and *.flp file but I can't communicate with them either.  I can see where a file is created, but when I try to go on the A: drive all that I get is Abort Retry fail.  Demolition and try again only to return the same message, in case of failure gives me 'excitation current is no longer valid.  I did a file .img with WinImage version 8.5 and I tie and I get the same answer.

  they would work as well - it's just that vmware.exe and vmplayer.exe write often poor vmx files
  See http://sanbarrow.com/vmx/vmx-floppy.html

• Cannot start the creative cloud and also impossible to uninstall too.

  When I try to run I get this. And the same msg when I try to re download

  

  When I try to uninstall using the uninstall of the desktop Adobe Creative cloud application tool I get this.

  .

  All I wanted was Lightroom. Running Windows 8.1

  Help!

  After you run CC Cleaner, you will need to download and install the Application of Office CC again.

  Get it from this link:

  Download Adobe Creative cloud apps | Free trial of Adobe Creative Cloud

• Error - WindowsUpdate_00000779 day Outlook Business Contact Manager and also impossible to uninstall Outlook Business Contact manager

  Original title: "WindowsUpdate_00000779".

  I get this error message "WindowsUpdate_00000779" "WindowsUpdate_dt000" when I run windows update. This update I believe is related to the 2007 Outlook Business Contact manager. Windows Vista operating system is also not allow me to uninstall Manager contacts Buiness from the control panel.

  Help, please. Thank you.

  Hi delphine,.

  (1) what happens when you try to uninstall Outlook Business Contact manager?

  (2) you get an error message?

  Method 1: To install the update, try the following steps:

  Step 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 2: To uninstall Business Contact Manager, consult the steps mentioned in the link below

  You cannot remove for Outlook 2007 Business Contact Manager by using the function "Add / Remove Programs" in Windows XP or in Windows Vista by using "programs and features".

  http://support.Microsoft.com/kb/958446

  Important: step 2 and method 2 task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If the problem persists, I suggest you to post your query on Office Forum for more specialized help.

  Office Forum

  http://answers.Microsoft.com/en-us/Office/Forum/office_other?page=1

• Satellite C660-1NJ - unable to connect to the wireless network

  Hi guys

  I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

  Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

  I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

  Can someone help will appreciate it greatly!

  Hello

  Are you able to connect to open WLan?
  I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
  Of course, you should only done for testing purposes

  If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Unable to connect to a wireless network - "the network card know driver or hardware related issues.

  Can someone help with the following problem please?

  I'm unable to connect to the wireless network.

  I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

  The symptoms are...

  (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

  (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

  I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

  OS is Vista Home Basic 32-bit SP2.

  I would be grateful for any advice that might help solve this please.

  I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

  Thanks for the replies.

• Unable to connect to other wireless networks

  RE: Unable to connect to other wireless networks

  • My computer is a HP Pavilion dv7 1232nr Entertainment Center
  • My OS is Windows Vista 64 bit
  • I have installed many things over the past year, but know that at some point, I was able to get on free Wi - Fi in hotels

  I am able to connect to my network, but when I try to connect to others, I'm unable to do. I have their password and my computer SHOWS I have a connection, but actually I'm not. When I try to connect to the Internet, the server is not found. I called the support/supplier for the last network owner and he told me that even if I "thought" I was online, I really wasn't. He said that it is probably a router configuration for that person that does not correspond to my computer. As I was just visiting, of course I didn't mess with their router. This happened to me twice, with once the provider is the same as mine, but the only way I could get connected with a hard link.

  So far, the only thing I did is to see if I could connect to free wireless (municipal library) and was unsuccessful. I think the problem is with my settings, but am not sure. I have to be careful to change anything because I can't afford to lose my connection at home because my job depends on it.

  Any suggestions?

  Thanks for any advice you might be able to share.

  Hi, Pat:

  I am very confident that if you download and install the driver from the link below, your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-99392-1 & mode = 3

  Paul

• Unable to connect to my wireless network

  I recently discovered that my wifi for vista would not connect to the internet even if the signal is 100% solid.

  My wireless House has a WEP encryption and it has already been saved on the laptop but since yesterday it ask me the WEP key when I try to connect it and wouldn't connect even if only the WEP pass has been entered correctly. The message that usually appears at the end is "windows is unable to connect, try the other network", even when I tried my companion's unsecured network.

  Here's what I did so far, but without success...

  I checked the Wireless driver from Device Manager and it works properly. I even try to update the driver and received a message that the driver is 2-update.

  Here's what I got when I tried to use "ipconfig/all".
  ..................................................
  Windows IP configuration

  Name of the host...: AZOU
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbp
  s USB 2.0 network adapter
  Physical address.... : 00-22-5F-36-AE-19
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : Belkin
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-7A-3C-AE
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::1ad:202c:5412:8070% 10 (Preferred)
  IPv4 address...: 192.168.2.35 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: May 2, 2009 19:58:15
  End of the lease...: June 9, 2145 03:09:10
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DNS servers...: 192.168.2.1.
  194.168.4.100
  194.168.8.100
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Belkin
  ... Description: isatap. Belkin
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  I can use the Ethernet cable to connect and this is killing me lol seriously... can anyone pls help me, I want to get this working wireless!

  Thank you

  Hello!

  What computer Toshiba laptop and OS do you have?

  In your case, I would check the Web from Toshiba site for an update of the BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Have you tried to reset the router? Unplug the AC adapter from the router, wait 5 or 10 minutes and then try again.
  Another laptop works on the router?

  Good bye

• Satellite L650 - unable to connect to the public network (has no valid IP address)

  Hello

  Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

  I have visited many forums and did everything, but of no use.

  1. people with disabilities the tcp/ip V6 of the registry.
  2. the DHCP is enabled. With the help of the automatic IP (DHCP)
  3. also tried with a static IP configuration.
  4. uninstalled the antivirus provided with laptop computer (Norton).
  5 disabled the windows firewall.
  6. restored to factory settings.

  I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

  Can someone please give some other suggestions for this problem?

  Hey,.

  Can you connect to your home WIFI router correctly?

  If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

  What you can try is updated WLAN driver from Toshiba's official website:
  http://APS2.toshiba-tro.de/WLAN/

  If it doesn't work, ask the person contact I mentioned.

• HP Pavilion 15 laptop: Solved: unable to connect to my wireless network

  I have problems connecting to my wireless network. In available connections, my network is there with an x next to it. I can click on it and put my security key in, but it says unable to connect to the network. I've updated ready network cards. Any help would be greatly appreciated.

  Bobby

  Thank you for all your help. I'm back on now. I started having trouble a few weeks ago. My wifi connection would pass, and I have to disable and then re activate my network card back. This has been relatively shortly after my upgrade from Windows 10 but not immediately after. Then the other day which didn't work and I could not connect at all. I read somewhere to try to uninstall the network adapter and then restarting. It did not work. I also read to find updates for the network card and install those which, as mentioned by ichi730 as well. This no longer works. Then, I realized that I had not tried to restart the router after reading the post of WyreNut. It worked, thank you! I feel that it is a combination of the two pieces of advice that have worked so.

  Thank you all for your comments, it's much appreciated.

  Bobby

• G5E22EA #A2N: unable to connect to the wifi network

  When I turn on the wifi in my HP Pavilion 15 laptop pc and try to connect to my network of your choice... it says "check and connection. After a minute, it says "cannot connect to this network '...

  I tried to use the other pc and smartphones to connect to my network of your choice via wifi and they connect successfully and I can use wireless net in other devices!

  Hello @Khaled-819.

  Thank you for your query,

  I understand that you are unable to connect to your wireless network, but other devices connect correctly.

  Have you ran the Windows troubleshooting tool?

  Did you run the Internet functionality and security in HP Support Assistant ?

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  If you are unable to connect I would test for a hardware failure.  You will locate network under the title of part.

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  To say thanks for the reply please click the thumb up below.

  If you were now able to solve your problem please click on accepted the solution to help others.

• Error message: "unable to connect to the RPC Server" and no internet connection.

  Original title: recently installed a program of pc cleaner. Seemed to really speed up my laptop that is running Windows XP.

  After two days I try to connect to the internet and no connection lie. Uninstalled the pc cleaner without problem but the problem continues to exist. All tests, etc., result in "unable to connect to the RPC server. Slide short drive and reinstall XP, are there any other things to try?

  Hi Wantamustang,

  You can try the following steps and check.

  You can set the remote procedure (RPC) call Service to start automatically:

  a. clickStart, point to settings, clickControl Paneland then double-clickServices.

  b. in theservices list, click the remote procedure (RPC) call Serviceand then clickStartup.

  c. underStartup Type, click Automaticand then click OK.

  d. restart your computer.

  You can also consult the following article:

  Windows wireless and wired network connection problems

• Unable to connect to the Wi - Fi "Verizon MiFi" network

  Using the Windows XP w/SP3 Media Center Edition operating system. Recently got a Verizon Wireless MiFi wireless hotspot. The computer will connect while the device is plugged into the USB port but not connect wireless. I get the following error message: unable to connect to the network Wi - Fi "Verizon MiFi. To make another attempt, press the retry button. If you want to change the permissions for "Verizon MiFi", press the button change the credentials.

  I tried the Microsoft #871122 articles, 313242, 815485, 826942, 884787 and 915727.

  Any ideas? I'm at the end of my rope.

  Moreover, my laptop that runs Vista operating system connect wireless.

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• Vista PC is offline, unable to connect to the Internet by LAN or wireless.

  Original title: Vista (Japanese OS)

  My Vista pc is offline (unable to connect to the internet), how install and run the Fixit tool?

  I have read that the English, however, my pc is in Japanese. I can't connect to the Internet by LAN or wireless.
  How can I get the Fixit tool to work on the said pc?
  Help, please!

  Hello

  1. what Fixit tool you try to run?

  2. what exactly happens when you try to connect to the Internet? You receive messages or error codes?

  You can read the following article and check if it helps:

  Windows wireless and wired network connection problems

  You can also read the following article to change the display language:

  Change the display language

  You can use another computer to download the Fix from Microsoft, then use portable storage such as a USB drive, CD, DVD, etc., to carry the Microsoft fix it on your computer.