Unable to connect to WIFI after upgrade windows 8.1

Hello

I fortunately was connection to my wifi at home last night before my HP Pavilion notebook updated to windows 8.1 g7. Now, I can only connect via ethernet cable.

I called Microsoft Support and I was told that my wifi driver was outdated and must be reinstalled. I had a look at downloads available for the network drivers, but I'm not sure how to establish that that I need... There are 4 options.

In the Device Manager > network adapters, it there was only one pilot who needed according to this update. The Realtek PCle FE Family controller. When I checked the updates here is said that it was updated successfully, but I am STILL unable to connect to the internet.

Microsoft say it is a problem of HP, not them. Help, please.

Thank you

Hello

My suggestion: using Device Manager to uninstall the Wireless driver and reboot the machine. Machine should say new hardware installed and find the good jerking for you OR you can download driver Realtek (wireless) from the above link and reinstall it.

Kind regards.

Tags: Notebooks

Similar Questions

  • Unable to connect IDE device after upgrade to 10.3.1

    Hi all

    I had updated the BlackBerry smartphone to 10.3.1, and after the upgrade, I am unable to connect my machine to Momentics IDE or deploy an application on the device of comand prompt.

    When I try to deploy from the command prompt, I get the following error.

    Error: Cannot connect: Connect to /169.254.0.1:443 timed out. Please check IP address settings for the target. You may have to reboot the target.
    

    Development on my device is set on IT.

    Concerning

    I had mode developer cross checked several times, but without success.

    Problem is solved.

    I deleted the data unit and then installed the upgrade pushed by Blackberry. Magic happened and it started working.

  • ENVY 750-197c: unable to connect to WIFI after downgrading to win 10?

    So I just bought a HP ENVY 750-197c desktop computer and the first thing I did when the establishment was downgrade 10 Windows of Windows 8, which worked very well. However, now I am not able to detect the connections/connect to WIFI on the computer. I guess it's because I need to update or get the correct drivers. However, I can't know which ones I need. When I look at the Download Center here on the site and go to the list of drivers for this model of computer, there is no option to select the drivers for Windows 8. Instead, there are only options for Windows 7 and Windows 10. How am I supposed to download the right drivers, I need? Which?

    Hello:

    The list of parts for your PC shows that it comes with an INTEL 3165 m2 card.

    http://PartSurfer.HP.com/search.aspx?SearchText=N0B14AA

    Here is the link for the driver to W8 for this model of card.

    The second file is left for W8 64 bit.

    https://Downloadcenter.Intel.com/download/24863/Intel-PROSet-Wireless-software-and-drivers-for-Windows-8-?product=89450

    You will also need this driver bluetooth if you want that the BT function works.

    https://Downloadcenter.Intel.com/download/25321/Intel-PROSet-Wireless-software-for-Bluetooth-technology-for-Windows-8-64-bit?product=89450

  • Unable to connect to wifi after factory reset

    This morning I had to do a factory reset on my Presario SR5214X. All came out of it works well, except that now I can't connect to wifi. The only options it gives me for internet connection are broadband and dial-up. WiFi was working fine before reset and I have installed the only network driver update available on the Web site, but it still does not seem to recognize any kind of wireless connection. The computer is a good 5 or 6 years, but it was working fine and all seemed well before. How can I update or install to get the computer to work again with wifi?

    Hello:

    There might be some brands that have this hardware ID, but it shouldn't matter.

    Try the driver for this model.

    http://www.Dlink.com/UK/en/support/product/DWL-G520-802-11g-wireless-LAN-PCI-card?revision=deu_revb

    You can automatically install the driver by running the configuration file once you unzip the download, or you can just install the driver manually by clicking on the ethernet controller in Device Manager. Click on the driver tab, click on set to update driver. Select the 'Browse my computer for the software' and look for the folder that you unzipped.

    Make sure that the include subfolders is selected and the driver should install.

    I don't know if the installer also installs the connection software (that I do not particularly like because I let Windows manage my network connections).

    Manually install the naked driver will prevent the installation of additional software.

    If for some reason that this driver doesn't work, then try one of this model.

    http://support.NETGEAR.com/product/WPN311

  • Unable to connect to Wifi after new Hard Drive installation

    Hello, I really need help. I have searched this forum days, reinstalled my drivers in the correct order, but I'm still not able to connect to Wifi.

    I have a Dell Inspiron 1545 and I recently installed a new hard drive. Everything works fine EXCEPT the WIFI. In the network controller device manager has a yellow triangle with an exclamation mark inside. I tried to search to find the driver but it says that it is impossible to locate. When I download the Intel driver on the Dell site, it downloads but nothing never opens. I'm at a lost and I just need help. All the answers or pointing in the right direction if this has already been resolved would be greatly appreciated.

    OS: Windows Vista 32 bit

    MizzGi,

    Download and install in this order...

    Dell System Software, v.6.5.0, A05

    Intel GM45 Express Chipset Family, v.8.7.0.1007, A00


     
     
     
    Then, go to the Dell warranty status , enter your service tag, click the original configuration. Look and see what wireless adapter that you have installed. Then, go to the drivers & downloads , enter your service tag, select your operating system and under network, download and install the drivers for your card.
     
     
    Then, download and install Dell QuickSet, v.9.6.21, A07
     
     
    Places to look to see if your connection is activated
     
     
    What is going on?
     
     
     
     
    Rick
  • Unable to connect to wifi after downgrade to windows 7 - Lenovo Z580

    Hi all

    Recently, I got my windows lenovo z580 8 for windows 7.

    Installed all the drivers bur everytime I open my connections, it's listed Wireless:

    I searched a lot of drivers online but none worked, even the ones I found on the lenovo Web site.

    Here is the code:

    I REALLY need a hep with it.

    Thank you very much.

    Download drivers here: http://www.atheros.cz/atheros-wireless-download.php?chipset=70&system=5

  • Unable to connect to google after installing windows 10 "secure connection failed".

    I installed windows 10 today.

    now, every time that I can't get to google/youtube to firefox, internet explorer and opera.

    I get this error:

    "Secure connection failed".

    The connection on www.google.com while the page is loading.

       The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
       Please contact the website owners to inform them of this problem."
    

    I would appreciate help, google and youtube are rather important

    Sorry for the delay, long day away.

    With this many cross-browser issues, can you confirm that your system clock date, time, and time zone are all correct? SSL validity checks are time sensitive.

    If you see a globe, I think that you are unable to use an HTTPS address. Usually Firefox displays a padlock or a "!" icon in the shape of triangle on a HTTPS address depending on whether the certificate withdraws or has a problem.

    Is there a code in parentheses, separated by underscores in the error page? If so, could you copy and paste this code.

  • ProBook 4430 s: unable to connect to wifi after software update, only can connect through ethernet

    Need some help here.  This is the second time something like this happened to me but the last time I could happen to someone who could help you by phone.  This time, no luck.

    My computer recently had an upgrade of the software (I think it was an Apple / itunes software update, but I remember now because I chose not to close to complete the upgrade).

    Now I can't access wifi on this computer, however my other computers in the House all the work.  If something is here.  Can anyone help?  I have Windows 7.

    Hi @TomKarl ,

    Thank you for visiting the Forums HP's Support and welcome. I looked into your question your of you Probook which is a commercial product. To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

    But you can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

    When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

    Thank you.

  • Unable to connect to peers after upgrade from Leopard to Lion

    Greetings!

    Update from Leopard to Snow Leopard to Lion (must have the cloud!) yesterday. All right.

    Have run the version Version 1.1 (62573) Fusion for more than four years on Leopard. It has always worked fine, never had a single problem, so why just change. Fusion to run Windows XP.

    After the update to Lion, now error message appears: could not connect to peer.

    I've browsed the forum a bit, but can't seem to understand what is the cause.

    I am a user of software, not so much a technical guy...

    All advice is appreciated.

    Thank you very much

    best,

    Marcel.

    If in the shows of the VM settings, the drive hard 100 GB then Windows must also show as 100 GB, however if it is not previously affected and there is no Snapshots and that you ran the VMware Tools shrink function then on Mac in the Finder it should only show the approximate size displays the used space in Windows Explorer.  It will of course grow and take additional host of disk space that the content is added to the guest or snapshots are made etc, etc.

  • Unable to connect to Analytics after restarting windows

    Hello

    I installed OBIEE 11.1.1.5.0 successfully on my 64-bit windows 7.

    Follow these steps...
    1 install the Microsoft Loopback adapter
    2 created BIPLATFORM and SDM metadata Oracle XE local repositories, using the repository creation utility
    3. follow-up of more than process one hour of installation of middleware/weblogic and applications of BI...
    4A was able to connect to http:// < localmachinename >: 7001/analytics using the user 'weblogic' by default, see the dashboard sample etc..,.
    5 has been able to connect to OBIEE administrator using the same 'weblogic' user and the password for repository "Admin123"...

    So far so good..

    However, when I restart my computer after installing, am not able to connect to one of them. Make me the ' chrome cannot connect to the webpage http://xxxxxx:7001 / Analytics "or" IE cannot display this webpage "error.

    To be sure, I Redid the same installation on another computer of windows7 64-bit and the same error occurs. i.e., am able to connect to the analytical page after installation, but when I restart the machine... can't connect to the Web page is displayed...

    I checked the services and yes the ' Oraclec_oracle ~ 1_oracle ~ 2c_oracle_mw_instances_instance1ConfigurationManager' service is running.

    There is an additional setting that I should consider? PL. help.

    Thank you.

    Hello
    I just wanted to confirm you that you did. After the reboot of the machine, have you started the OBIEE Server also located on the Weblogic Server. Since start-> all programs-> Oracle Business Intelligence-> Start BI Services. This real will start the OPMN Services and then start the actual server in OBIEE. OBIEE server is one that has Analytics, xmlpserver modules etc. deployment.

    When you click Start the Services of BI, command below is executed. There is an xml file that has all the tags to start, stop, etc.

    C:\Oracle\Middleware115BI\instances\instance1\bifoundation\OracleBIApplication\coreapplication\StartStopServices.cmd start_all

    Once the server is completely started, it will automatically open a browser page also. But make sure that the server is started, completely, without any error. DO NOT CLOSE this window. If you close it, server will be stopped.

    Thank you
    Ravi Jegga

  • HP ENVY TS m7 E0K83UAR #ABA: unable to connect to wifi after update to Win 8.1

    The problem is similar to another recent post. Since the update to 8.1, I couldn't access my wifi. It shows also available and has 5 bars, but it is impossible to connect. I tried to connect via the button on the router and it says that it is impossible to connect this way, enter the password. I am able to connect with another pc without problem and able to connect via cable. I am also able to connect to the laptop using my phone hotspot. I have updated the drivers on the network adapter and wireless (centrino wireless-n 2230). I contacted Microsoft and got no help from them. Any suggestions?

    Understand the problem and I guess I should have checked there first. Reset us the router. I just didn't know it would be one I could connect with my old computer and was able to connect with his son-in-law. However their smart TV has not connected and my laptop running 8.1 would not connect to the router. As I said I could connect to the router via cable rigid and also connect ot my hotspot with the laptop. Live and learn I suppose.

  • View Connection Manager is unable to connect to vCenter after upgrade to vCenter 5.0

    Our upgrade to vCenter Server 5.0 went smoothly and that our environment is transferred to ESXi 5.0.   However, since the upgrade our environment view seems not to be connected to vCenter.  If I go to view administrator > Configuration > servers and change the entry for our vCenter Server I get a connection failure message when you click "OK".

    I checked that the username and password specified to connect to vCenter administrator mode are correct.

    4.6 and earlier versions is not supported and will not work with vSphere 5 (look on the VMware compatibility matrix). I am bitten by this before so I checked that before even thinking about updating to ESXi 5. You need to wait seen 5.0 for compatibility with ESXi 5.

  • Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

    Hello

    I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

    I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

    Hi there @tikaro23,

    Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

    I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

    What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

    Have you tried to restore the BIOS?

    Have you tried to connect directly to the Modem/Router?

    Have you tried to boot mode safe?

    You can maneuver in Mode safe without problem?

    In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

    There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

    You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

    • Uninstall the driver of network card in Device Manager,
    • Reboot the laptop twice,
    • Reinstall the driver.

    Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

    I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

    • In the Device Manager
    • Click the network adapters to expand
    • Right-click on the network adapter family
    • Select software update of the driver
    • Choose search for automatically updating driver software.
    • Once the installation is complete, restart your laptop.

    Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

    Thank you!

  • Satellite Pro L300 will not connect to Wifi after hibernation

    Hello

    can someone there help me please?
    I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

    The only way to do it is to restart the pc.

    Any suggestions?

    Hello!

    I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

    In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
    http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, you run the factory settings or you have installed a different version of Windows?

    Good bye

  • Unable to connect to wifi and cannot adjust the brightness in hp pavilion 1322tx g6

    Hello guys. I can't connect to wifi after that I installed win 7 64 bit on my hp pavilion 1322tx g6. Wireless light stays red. He is not white. and I can't adjust the brightness too. the same operating system works very well on my desktop. in the Ethernet controller network controller driver manager and other things are missing. Win 8 64-bit work very well on this laptop. Please someone help me...

    Operating system Windows 7 does not have drivers for the hardware of this unit. your office may be a little older had so drivers win7 disc itself. also windows 8 has most of the current hardware drivers, it works well too.

    for win7 64-bit, you must download all the drivers from hp.com and install on your laptop.

    Here's the direct link...

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5227785&prodTypeId=321957&prodSeriesId=5186808&swLang=13&TaskID=135&swEnvOID=4063

    Incase you have trouble in direct link, here are the steps to download drivers for your PC.

    Hello

    Please visit www.hp.com/in and click on support & drivers > drivers & software > type the full model of your PC as the 6100 dv6 dv6-3100 etc... Select your computer model (if the list), or model CTO (for example, dv6-6100 CTO) (who works for the series) now select the operating system you are running. you have the list of drivers for your PC.

    I hope this can help, good luck!

Maybe you are looking for