Unable to connect to wireless internet at home and cannot renew IP address

Similar Questions

• Help. Unable to connect to wireless internet at home

  Hello

  I have a T410 of work that can not connect to my wifi at home. He has worked in the past, but now he's going to connect to my router but will be no internet or say limited connectivity / No.. It is a work computer, so there may be a few firewall issues (I am able to work from home, so it should be allowed).

  If this is detailed in another post please direct me.

  If you need more information, please let me know and if you could give me instructions on how to recover the said info (not computer illiterate, but no guru)

  Thank you in advance for your help!

  Best,

  Jay

  Hello j2534a, welcome to the Lenovo forums!

  Ask your administrator. I had the same problems. The firewall is the main problem I think.

  But that s a problem for your admin.

• Unable to connect to wireless internet, also infected by the Virus on the computer.

  Original title: got a "Guid_MFE_CONNECT_CALLOUT_V4" problem using windows vista OS

  Hello:

  Unable to connect to the internet.  Using a wireless adapter on this computer.  Tried, connect directly to the router with cables.  Had a virus that affected anti -.

  anti-virus software.  Uninstaller for Windows did not remove all antivirus software.  Computer won't let not the admin deletes the folders on drive "C" where are the files of Kaspersky Anti-virus.

  Any help out there.

  Ty

  Hello

  You can try to boot to the desktop in Safe Mode with networking and check if the problem could be solved.

  Follow the link for starting office in Mode safe mode with networking Option.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

• Unable to connect to wireless internet after Windows Vista update on 16/09/10

  Since I've updated windows I cannot access my wireless internet connection, however, I am still able to connect via the LAN port.

  If I check my ipconfig it says under the "media disconnected" wireless network connection  I tried to get my IP address into my settings because they seem to have disappeared, but I can't always wireless.  I ran all Windows diagnostic tools, but all say that the internet connection is fine (due to it being connected by the LAN port).

  I also tried to fix it by other solutions on this forum, that is

  • Open Set Up a Wireless Router or Access Point by clicking theStart button, clickingControl Panel, clicking network and Internet, and then clicknetwork and sharing Center. In the left pane, clickset up a connection or network, and thenset up an access point or wireless router.

  The result of the message is ' Windows has detected network hardware, but it cannot automatically configure "and when I try to manually configure the server requires a user name and password which I don't have.

  Please could shed you some light on this case for me?

  Thank you very much

  Hello

  I tried everything above without result.  However, I managed to reinstall my wireless router software after having repaired my DVD driver software.  I restarted my computer and Wireless does not work.  Reinstalled the software new and restarted the computer, and then after a short period of time the computer connected to wireless internet!  Not know not why the remedy has been delayed or why it did not work after the first attempt, but it connects wireless now - what I know is that this problem occurred after an update of Windows, it's a shame that Microsoft failed to address this problem as it was their update it as many other people have also claimed.

  A big thank you to everyone who offered advice.

• Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

  I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

  Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

  I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

  Someone, please help!

  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  Hello

  When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

  First step, log on to the HP support and download the latest drivers for your wireless card.

  The HPG60 is a very good phone but its wireless card has problems with old drivers.

  In which case it's a hardware problem, contact HP support.

  In general, you can use this process to find out what's wrong with the wireless.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Idealpad Y430 is unable to connect to wireless internet

  I just bought a new Idealpad Y430 but cannot connect to the internet via my wireless network. It works with a cable connection. My other laptop works very well with the wireless connection. Can someone help me solve the problem

  You must uninstall program "Lenovo ReadyComm' of your Y430.

• Unable to connect to the internet at home

  Said laptop computer connected to the Internet but don't network said unidentified also no internet access. If I leave the House and go to another network, it works fine. I tried all @ home, but nothing works. I have other devices that work very well @home.

  Click Start, type: cmd

  In the pop-up box, right-click on cmd.exe and in the drop-down list click on "Run as Administrator"

  The will of window and open command at the command prompt, type:

  enough ipconfig and press the enter"" key.

  then type:

  ipconfig / renew and press the key "Enter".

  Next type:

  ipconfig/flushdns and press the enter"" key.

  Now, quit the command prompt.

  Restart your computer and try to connect.

  J W Stuart: http://www.pagestart.com

• Unable to connect to wireless internet with error message: "problem with wireless adapter or access point.

  Original title: I am trying to connect to my WiFi.

  I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the brand and model of the computer?

  Method 1:

  Follow the steps in the link below.

  Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps in the link below.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Follow the steps in the link below.

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

  Hi all

  I had a very big problem with my card.
  I can t connect to the internet.
  I searched the forum but without any determination :(

  I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
  Someone said too
  "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it redétecte this new")

  How to disable the modem?
  And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
  I put t even know that :(

  Help me

  Hello

  The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
  LAN driver can be found on the page of Realtek.

  You ask how to disable the modem? I think you mean how to reset modem DSL
  Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

  If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

  Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

  All that s

• Unable to connect to remote between my home and work PCs

  Original title: 'remote connection '.

  I am trying to connect to distance between my office at home and at work. Not on the same network, but both connected to the internet.  We have Windows 7 Home premium and it has windows 7 Professional.  Is this possible? I can't do. Help, please.

  I am trying to connect to distance between my office at home and at work. Not on the same network, but both connected to the internet.  We have Windows 7 Home premium and it has windows 7 Professional.  Is this possible? I can't do. Help, please.

  If the work PC runs windows 7 Pro then look at Remote Desktop [DRC] / remote access from your Windows 7 Home Premium PC home control.

  http://Windows.Microsoft.com/en-us/Windows7/allow-someone-to-connect-to-your-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-another-computer-using-Remote-Desktop-connection

  If the work PC is behind a router/firewall then TCP Port 3389 must be opened/forwarded through the router/firewall.

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  Call using the public IP address of the router/firewall or use a full domain name [FQDN] as appropriate. More help DRC...

  http://Windows.Microsoft.com/en-us/Windows7/search?q=remote+desktop&PRD=Windows7

  If the work PC is running Windows 7 Home Premium then look at alternatives such as GoToMyPC, as suggested by Ben or TeamViewer, LogMeIn. Note that this is maybe not free in a work/business environment.

  http://www.TeamViewer.com/index.aspx

  https://secure.LogMeIn.com/welcome/access/freedom/3/?WT.srch=1&originid=5646&utpk=LogMeIn&destination=/welcome/access/freedom/3/

  In all cases, you need to work with your network administrators. If it is a legitimate work related requirement, they will help you access remote set-up. Its also possible they may require that you access the network through a VPN for security reasons. This ad-hoc could violate policy work regarding the connection an untrusted network or PC, IE. your home, to a reliable network system, IE. your system of work.

  MS - MVP Windows Desktop Experience
  "When all else fails try what the captain suggested before you started...". »

• Unable to connect to wireless internet after formatting the system.

  Original title: Mr

  Hi, please my dell Inspiron gives me a serious problem to connect to any wireless router, I can only use moderm to brose, I can't connect to any wireless network, this happened to me after that I have format the system but all other things work.

  Hello

  Thanks for posting your query on Microsoft Community forum.

  As you mentioned after formatting the system, you cannot connect to a wireless router, I recommend updating the firmware on your router and updates your wireless network adapter drivers, as there might be a chance that the wireless drivers are deleted.

  The majority of connection inside Windows 7 problems have been resolved by installing the latest driver for the wireless card with obtained from the manufacturer. Download and install the Windows 7 compatible drivers and check whether the problem is resolved.

  You can refer to the link provided below to update the drivers from the manufacturer's website.

  DELL drivers.

  If the problem persists, I suggest you try the below mentioned methods and see if it helps you to solve the problem.

  Method 1:

  First of all, I suggest you run Windows built-in network troubleshooting to get the problem automatically detected and corrected.

  See the article below to run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7#section_2

  
  

  Method 2:

  This problem can also be bound to the adapter, reset, update driver, disabling, re-activating, uninstall and reinstall network adapter can help.

  Follow the steps in the following article to troubleshoot network adapter.

  How can I troubleshoot network adapter?

  http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

  See also: Wired and wireless network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Unable to connect to wireless internet

  I just put a new HD in my Satellite L35-S2161. I haven't used the Toshiba restore disk, instead I used my XP Pro / SP3 disk. I have two problems.

  First of all, I can't my wireless to work. I installed the Driver PCI Atheros and the Atheros customer Utiliy. I also installed ConfigFree.
  The wireless card does not appear in the hardware Manager, so miss me something else.

  I put the original disk hard back in and everything works, so it must be a problem of driver software.
  Also the Power Saver Utility does not work. The only thing I can find is that I need the common Modules for Toshiba. OK where do I find.

  Can you help me?

  I assume you have the laptop model US so visit the Toshiba U.S. support under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp page

  If your laptop model is listed you will find all the missing stuff.
  Install common modules, the correct driver WLAN and energy savings that you can find.

  Let us know if you have success with this. If this isn't the case, we can try to make the list of facilities for you order, and you can install it following order exact facilities.

• Vista PC is offline, unable to connect to the Internet by LAN or wireless.

  Original title: Vista (Japanese OS)

  My Vista pc is offline (unable to connect to the internet), how install and run the Fixit tool?

  I have read that the English, however, my pc is in Japanese. I can't connect to the Internet by LAN or wireless.
  How can I get the Fixit tool to work on the said pc?
  Help, please!

  Hello

  1. what Fixit tool you try to run?

  2. what exactly happens when you try to connect to the Internet? You receive messages or error codes?

  You can read the following article and check if it helps:

  Windows wireless and wired network connection problems

  You can also read the following article to change the display language:

  Change the display language

  You can use another computer to download the Fix from Microsoft, then use portable storage such as a USB drive, CD, DVD, etc., to carry the Microsoft fix it on your computer.

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• Pavilion entertainment PC: unable to connect to the Internet wireless or cable

  Hello
  My laptop usually automatically connect wirelessly to the Internet at home and work. It worked yesterday but not today.
  I checked my internet is fine, I checked the connection with an Ethernet cable and it doesn't work. I tried to connect to the hotspot from my phone, it does not work also.
  I have not changed any settings on my laptop.
  Need help please, I'm not very tech savvy but he need to get this working.
  Thank you
  Kelly

  All sorted