Unable to connect TV laptop with Intel WiDi 42VL963G
I wanted to ask you kindly a helping hand because I'm having trouble connecting my computer to the TV via intel WIDI.
I declare that they are in possession of a TV TOSHIBA 42VL963G accompanied by key dongle WLM-20U2
The COMPUTER AND ' a LENOVO... S300 fully compatible with the intel wi - di. "I also downloaded the updated firmware TV proposed by you. So all is good.
Now, I describe the steps that I followed and where it gives me problems:
1 APRO TV AND AFTER LAUNCHING THE APP WI - DI MI NORMAL SCREEN IS SHOWN FIRST CONNECTION
2. AT THIS POINT AS SUGGESTED APRO APPROX. COMPUTER WI IT WORK BEGINS TO LOOK FOR THE ADAPTER.
3 ADAPTER IS RECOGNIZED AND IS REGULARLY PRODUCED IN THE PC OF THE SCREEN. WITH THE NAME OF "TOSHIBA LCD TV' AND DO I select ' START THE CONNECTION.
4. at this POINT on TV, I get security to 4-DIGIT NUMBERS THAT I insert, AS suggested on THE PC THEN I click on CONTINUE
5. HERE "START THE PROBLEM: THE SCREEN FOLLOWING INSTEAD OF"
HOW DOES the DEVICE TV, MI IS a DEVICE BEARING THE NAME OF "Mstar-TSB."
6 PROVO OTHERWISE CONTINUE WITH WHAT IS RECORDED
* THE PC if you click on THIS TEMPORAL CODE 8 FIGURES MADE BY PC as instructed ' CONTINUE it BUT NOTHING...
I tried and tried everything I get is always the same device instead of TV 'Toshiba LCD TV' and the computer cannot of course REGISTER AS A LINK.
Hello
In order to use the Intel WiDi the Toshiba Dual Band
Adapter WLAN WLM-20U2 is necessary.
Do you use this adapter?
Also you can find here in this manual detailed step by step instructions how to use the Intel WiDi (page 56)
http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/VL963-424755-English-specific.PDF
In addition the name of the device TV Intel Wireless Display he is editable.
a preferences menu, press B or b to select Setup and press OK.
b press B or b to select Intel® Wireless Display Setup and press OK.
c select Intel® Wireless DisplayName, then press OK. The software keyboard window will appear.
d enter the name of the Intel® Wireless Display device using the software keyboard (see page 46). Press the BLUE button.
e highlight done and press OK to save your settings
Tags: Toshiba
Similar Questions
-
Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.
Hello
Try the methods below to solve the problem.
Method 1:
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Method 2:
How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista
http://support.Microsoft.com/kb/811259
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
-
I have a desktop with windows 7 and a Linksys E1000 router and you want to connect a laptop with windows 8, it will work router?
Yes, it should work perfectly, if wired (Ethernet) or wireless.
Click on the network icon in the Notification area
Click on the available wireless network that you want to connect
In the list of available wireless networks, click a network, and then click on connect.
Some networks have need a network security key or password. To connect to one of those networks, ask the network administrator or service provider for key security or password.
-
I'm unable to connect my pc with another pc in same network. Code0x800704cf network error
I'm unable to connect my pc with another pc in same network.
Hello
1 - is the full error message?
2 did you do changes on the computer before the show?
Method 1: Run the network troubleshooter
See the site:
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2: Reinstall the driver
a. click Start, type devmgmt.msc in the start search box and press enter
b. expand the section maps network.
c. right-click on the adapter supplied with the computer and select uninstall.
d. now install the driver from the manufacturer.
-
How to connect to Android tablet with Miracast for Toshiba RL953B with Intel WiDi
As the title, I can't my Android tablet to connect to Toshiba RL953B.
Tab android supports the miracast and the TV has Intel widi.
They can see themselves, but does not connect to display the A.s.u.s Notepad
Questions or workarounds?
> The tab android supports miracast and the TV has Intel widi.
I m not very well, but I think that Intel WiDi version which is part of the TV does not support the Miracast. The TV is in 2012 and the Miracast was announced in 2013
To my knowledge the Intel new Wireless Display v3.5 support Miracast.
The first versions of Intel WiDi does not support the Miracast. -
Satellite P870 - 026 Win 8.1 - no screen mirror for TV with Intel WiDi
I followed Windows procedures to mirror my Satellite P870-026 screen to a new TV Samsun with mirroring capability.
The process is under the menu of charms and then select devices, project, add a wireless display. The first few times I tried, he finds the TV, but it usually came with the message "no device found".
If she found the TV there no project screen of the laptop computer and the connection quickly abandon themselves. Now, he never finds the TV.
My phone Galaxy S3 connects and reflects its screen very quickly and is a stable connection, so the TV works fine. The TV is the current model of Samsung UA60H7000AW.
I understand that the issue could be the graphics drivers, I updated the Intel HD Graphics 4000 drivers but that did nothing.
I downloaded "Intel (r) WiDi Update Tool.exe", but it does not work. An error message says "Unable to launch due to network connectivity problem". I don't know what its means I have never wrong with WiFi.
I found a suggestion on the internet, but carrying on another computer and has been to remove and reinstall graphics drivers, but he also warned of the need to be very careful.
I'm not even in the right track to looking like the graphics drivers?
Any suggestions please.
Hans
Please check this Toshiba document on the support of the Intel WiDi and 8.1 Win
http://APS2.toshiba-tro.de/KB0/TSB3903IF0000R01.htmIntel® Wireless display is no longer supported on Windows 8.1, but you may be able to connect to the external wireless screen, if your computer supports Miracast.
-
Unable to connect my laptop XP Prof on printer Officejet J6450 AIO usb (in network)
Due to some problems of scanning, I have reinstalled my AIO on my USB port of office instead of the old Dell (Windows 7-64) ethernet link. However, I'm unable to connect from my laptop with XP Pro. I downloaded and installed the latest version of the software of full J6450 and can do a test print, but cannot access the printer through the center of Solution, that's why the scanner and other features are not available from the laptop. Also, is anyone know hence the hp software file is extracted to so I can re - run the Setup file?
The IOA has a w/l button, so I'll try an instalation w/l on the laptop.
Hello Tracer_C
Thanks for responding. The error was 'the scan cannot be performed because another program or computer uses... ". "The w/l installation was successful, after that several unsuccessful attempts. (I accept the blame for it). After 2 or 3 tries, I noticed the obligation to connect the printer to the USB port of the laptop to install the drivers. Apres_que the drivers have been installed the software it reset the network, and it does not connect until I plugged in the printer on the desktop).
I thought I could do a no-w/l installation, but it is just as well, because I don't often print the laptop anyway, so I can keep the w/l off on the router function until I need to print from the laptop.
I found the installation for Xp folder: C:\Documens and Settings\Temp\7Z***.tmp\Setup.exe Settings\nom of utilisateur\Local.
-
Unable to connect via wifi with iOS
These days I was unable to connect to Skype when on any wifi. As soon as I turn off wifi and use my cell network signed in full. I have a 6 s iPhone running the latest iOS and versions of Skype. Anyone else having this problem? I tried to reinstall the software with no luck.
Never mind... 3 attepnts later took an uninstall, force the restart of the iPhone and reinstall to get it working again.
-
OfficeJet Pro 8610: Unable to connect 2 laptop HP Officejet Pro 8610
I have 2 HP laptops each with Win7 (64 bit) SP1 and I'm trying to connect to the computer laptop 2nd in an OfficeJet Pro8610 to print wireless. I tried using the CD rom and download the drivers online but I can connect this laptop to the printer. I get to a point where the login process requires the printers claim id code but when I enter the code I got a message that this code is already in use (the other laptop is connected wireless) and in order to connect, I have to delete the other laptop. I am at a loss here because I had both the same laptops connected to my old 6700 OfficeJet and could print without any problem installing wireless at all.
What I'm missing here with the 8610? Thank you
Alkymst
AlkymstThe code you enter is likely to set up ePrint for the printer address. Once this has been done it is not necessary to do it again.
An alternative is that the laptop is connected directly to the printer with direct wireless wireless. In this case, you will need to disconnect the laptop computer from the printer to use the other laptop.
A better configuration would be to connect the printer to your router wither wireless or cable LAN cable. It would give the IP address which you can find by pressing the front panel of the printer to the printer (if the printer is in mode "sleep"), then tap the wireless at the bottom of the screen. This will bring up the LAN wireless status, where you can find the IP address of the printer.
You should be able to set up the printer with the driver available at http://www.hp.com/go/toolsinstallation wizard.
-
Unable to connect to WiFi with NETGEAR NighthawkAC1900
I plugged my router Netgear Nighthawk AC1900 R700 and can't get WiFi to work. the genius of Netgear watch my WiFi connection status is-is not activated. In Control Panel - Network Local connection this adapter is enabled. I use a modem Motorola Surfboard 400 series Arris works because if I bypass the router I connect to the internet via ethernet. What am I missing or not do?
Hello
Welcome to the Microsoft community.
I understand that you are facing the question about Wi - Fi.
I will definitely help you with this.
I suggest you go through the link below:
See suggestions that is marked as answer in the link below:
I hope this helps. Please post back with the State of the question and we will be happy to help you further.
-
Unable to connect Bluetooth speakers with Windows 7 system
Dear experts,
I have a laptop HP Pavilion DV7-2014TX running Win7 Ultimate.
I just bought a new Bose Bluetooth headset. I tried for 2 hours to try to pair it with my phone, but my laptop is not all bluetooth devices. I tried as much as I know, but I'm out of ideas. The only thing that I think now is that my laptop is old enough that it is no longer compatible with the version of bluetooth on my helmet.
Any help would be welcome, thank you.
George
Original title: Bluetooth
Hi George,.
Thanks for posting your query in Microsoft Community.
I understand that you can not use headsets Bluetooth of Bose enabled on Windows 7, but I would like to learn more about the issue in order to provide you with better assistance.
- You are able to connect and use another Bluetooth device on this computer?
- You did it any significant hardware or change software on the computer before this problem?
The question may arise due to the incompatibility with the Bose headphones Bluetooth driver. Then I suggest that you try the following steps Diagnostics to find out the root cause, apply patches, and check if the problem persists:
Method 1:
Try to follow the steps in the following link to resolve the problems with Bluetooth devices:
The problems with Bluetooth devices
(Note: article also applies to Windows 7)
Method 2:
If method 1 does not work, try to run the patch that is available in the following link and look for the question.
Bluetooth devices do not work correctly on a computer that is running Windows 7
Method 3:
Alternatively, you can try to check if the Bluetooth support service is running.
- Click Start, type services.msc in the Start Search and press ENTER.
- In the list of services, double-click the Bluetooth Support Service.
- Change the startup to Automatic type, then click Start to start the service.
- Click on apply and then click OK.
Trying to connect Bluetooth speakers with the computer and check if the problem persists.
Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
-
Can not connect to laptop with windows password 8 after update
Have a new laptop (ASUS) with windows 8. The laptop using my live account from microsoft for the login screen. After that the first windows update, I can not log on the laptop and had to have Best Buy reload windows 8 and start over. There is no way to unlock this processor without the password. This happened once more. I can log in to my account windowslive using a different processor, but cannot unlock the password of login by using the same password, as I did before the update. Other ideas that take over to Best Buy and getting the laptop with windows 7?
Hi WillieReed,
Thanks for posting on the Microsoft community!
Do you see the error codes/messages when you try to connect?Here are some solutions: -.
1. ensure that Microsoft account services are running, go to the page of the service status.2 reset your password from Microsoft
To reset your password, or get help with a password and other problems with your Microsoft account, go to reset your password.3. check the length of your password
Make sure that your Microsoft account password length is not more than 16 characters. The current maximum limit is clearly indicated during your initial account registration Microsoft upward, but may not be clear during a password change. The password change process to enter more than 16 characters, but your account will not accept anything more than 16 characters. You can change your password from Microsoft by clicking on change your password. (You may need to connect to your Microsoft account before you can access this Web page.)4. get on your Microsoft account to check if its been blocked or pirate by following the link below
http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account5. you can also follow the link below if you have forgotten your Windows password
http://Windows.Microsoft.com/en-us/Windows-8/forgot-Windows-passwordHope this solves the problem, you can write back to us and we will be happy to help you further.
-
Unable to connect to VROPS with admin / any username
I am unable to connect with the local user and domain name. Help, please
Open the VROPS VM console, log in as root user
You can reset the password for the user admin and root, your expired domain password? or have you changed the password of user LDAP source recorded recently?
to reset the admin password
pam_tally2 - user admin
If the account is locked, unlock it by running this command:
pam_tally2 - reset user admin-
now, try again with your old admin password.
-
Unable to connect to Oracle with sqlplus /nolog as sysdba
Oracle has turned on the box [Red Hat Enterprise Linux ES release 4 (Nahant Update 6)] taking up all the CPU.
When I try and connect with sqlplus /nolog as sysdba nothing happens, no output.
All ideas, apart reboot the box please?
We tried to kill all Oracle processes too & restart the listener, but what gives the same...
Log the following...
version 10.2.0.1.0 =
Oh, its happened before, the last time, we couldn't get by is rebooted then the box - it was fine then.
$. oraenv
ORACLE_SID = [oralt]?
dbhome
ORACLE_HOME = /u01/oracle/oracle/product/10.2.0/db_1
ORACLE_SID = oralt
RH4 - ora - t3:oracle:oralt/opt/oracle$ sqlplus/nolog
(Nothing)
VI /u01/oracle/oracle/product/10.2.0/db_1/admin/oralt/bdump/alert_oralt.log
Mon. Nov 22 02:01:57 2010
Notification of memory: Cache object library loaded in SGA
5118K heap size exceed the threshold of notification (2048K)
Details in the path of the /u01/oracle/oracle/product/10.2.0/db_1/admin/oralt/udump/oralt_ora_12801.trc file
Name of the KGL object: SELECT / * + rule * / SYS_XMLGEN (VALUE(KU$), XMLFORMAT.createFormat2 ('TABLE_T', ' 7')), KU$. SYS OBJ_NUM. KU KU _FHTABLE_VIEW $ WHERE NOT (BITAND (KU$.)) (PROPERTY, 8192) = 8192) AND NOT BITAND (KU$.) SCHEMA_OBJ. FLAGS, 128)! = 0 AND KU$. $ SCHEMA_OBJ.NAME =: NAME1 AND KU. SCHEMA_OBJ. OWNER_NAME =: SCHEMA2
Mon Nov 22 11:13:21 2010
Thread 1 Advanced for you connect to sequence 3280
Currently Journal # 3 seq # 3280 mem # 0: /u02/oradata/oralt/redo03_1.rdo
Currently Journal # 3 seq # 3280 mem # 1: /u03/oradata/oralt/redo03_2.log
(end)
RH4 - ora - t3:oracle:oralt/opt/oracle$ top
Top - 10:27:16 up to 199 days, 19:32, 2 users, load average: 24.82, 24.67, 24,19
Activities: 146 total, 30 running, 116 sleeping, 0 stopped, 0 zombie
CPU: 38.0% us, sy 62.0% 0.0% ni, id 0.0% 0.0% wa, 0.0% Hi, 0.0% if
MEM: 3115248 k total, 2736140 k used, 379108 k free, k buffers 247956
Swap: 6289436 k total, 80168 k used, 6209268 k free, 2229880 k cached
THE NEST PR NOR % CPU TIME + % MEM VIRT RES SHR S COMMAND USE
2173 25 0 17 263:51.52 2.5 oracle 607 m 74 m 70 m R oracle
2211 25 0 17 260:43.53 620 oracle 0.7 m 21 m 10 m R oracle
2154 25 0 17 262:21.71 605 oracle 0.5 m 14 m 13 m R oracle
2159 25 0 17 262:38.20 604 oracle 0.8 m 24 m 23 m R oracle
2161 25 0 17 263:05.82 3.1 oracle 607 m 93 m 90 m R oracle
2163 25 0 17 261:55.21 620 oracle 0.7 m 19 m 18 m R oracle
2165 25 0 17 261:13.85 606 oracle 0.8 m 24 m 22 m R oracle
2169 25 0 17 261:47.42 605 oracle 0.8 m 22 m 21 m R oracle
2171 25 0 17 263:20.01 1.8 oracle 606 m 55 m 52 m R oracle
2175 25 0 17 263:03.81 604 oracle 0.7 m 22 m 21 m R oracle
2177 25 0 17 262:15.91 605 oracle 0.4 m 10 m 9500 R oracle
2209 25 0 17 261:55.91 620 oracle 0.7 m 22 m 10 m R oracle
2745 25 0 17 257:08.69 604 oracle 0.5 m 15 m 14 m R oracle
6885 25 0 17 89:05.80 0.1 19652 4564 3228 R exp oracle
10344 25 0 17 1:26.30 0.2 91856 6584 5720 R oracle oracle
17568 25 0 17 263:29.11 605 oracle 0.7 m 21 m 19 m R oracle
22383 25 0 17 0.1 19576 4600 3280 R sqlplus oracle 111:38.92
22:56.01 27963 25 0 17 0.2 91856 6584 5720 R oracle oracle
8185 25 0 16 169:09.85 0.2 29816 6004 3300 R rman oracle
13633 25 0 16 261:50.72 605 oracle 0.5 m 14 m 13 m R oracle
12518 25 0 16 260:35.53 605 oracle 0.5 m 14 m 13 m R oracle
2156 oracle 15 0 25 262:28.54 604 0.4 m 11 m 9.9 m R oracle
2167 oracle 15 0 25 261:06.86 3.2 606 m 98 m 95 m R oracle
2669 oracle 15 0 25 261:46.97 604 0.6 m 18 m 16 m R oracle
0:00.09 root 15816 17 0 1 0.0 5680 1332 1052 R hpetfe
0:00.12 root 15663 16 0 1 0.1 7968 2348 1852 R sshd
0:00.19 root 15767 16 0 1 0.0 2156 1056 780 high R
0:00.15 high 15768 16 0 1 0.0 1948 1048 784 R oracle
1 root 16 0 0:58.86 0 0.0 2468 548 468 init S
2 root RT 0 0 3:44.17 0 0.0 0 0 S migration/0
3 34 19 0:12.75 root 0 0.0 0 0 S 0 ksoftirqd/0
4 root RT 0 0 4:24.86 0 0.0 0 0 S migration/1
5 34 19 0:11.23 roots 0 0.0 0 0 0 S ksoftirqd/1
6 root RT 0 0 4:28.40 0 0.0 0 0 S migration/2
7 34 19 0:12.55 roots 0 0.0 0 0 0 S ksoftirqd/2
8 root RT 0 0 3:59.44 0 0.0 0 0 S migration/3
9 root of 34 19 0:13.29 0 0.0 0 0 0 S ksoftirqd/3
10 root-5 10 0 0:00.84 0 0.0 0 0 events/0 S
11 root-5 10 0 0:00.43 0 0.0 0 0 events/1 S
12 root-5 10 0 0:01.82 0 0.0 0 0 events/2 S
13 root-5 10 0 0:00.80 0 0.0 0 0 events/3 S
14 root 6-10 3:08.62 0 0.0 0 0 0 S khelper
15 root-5 10 0 0:00.00 0 0.0 0 S 0 kblockd/0
backkup #killed jobs...
RH4 - ora - t3:oracle:oralt/opt/oracle$ kill 6885
RH4 - ora - t3:oracle:oralt/opt/oracle$ kill 8185
RH4 - ora - t3:oracle:oralt/opt/oracle$ kill 22383
RH4 - ora - t3:oracle:oralt/opt/oracle$ lsnrctl
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on November 23, 2010 10:37:39
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Welcome to LSNRCTL, enter 'help' for more information.
LSNRCTL > status
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start date August 6, 2010 14:57:55
Uptime 108 days 20 h 39 min 46 s
Draw level off
Security ON: OS Local Authentication
SNMP ON
Parameter Listener of the /u01/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora file
The listener log file /U01/Oracle/Oracle/product/10.2.0/Db_1/network/log/listener.log
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.1.209.208) (PORT = 1521)))
Summary of services...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
Service 'oralt' has 1 instance (s).
'Oralt' instance, State LOAN, has 1 operation for this service...
Service 'oraltXDB' has 1 instance (s).
'Oralt' instance, State LOAN, has 1 operation for this service...
Service 'oralt_XPT' has 1 instance (s).
'Oralt' instance, State LOAN, has 1 operation for this service...
The command completed successfully
LSNRCTL > stop
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1)))
beginning
(Nothing)
RH4 - ora - t3:oracle:oralt/opt/oracle$ running time
10:38:35 up to 199 days, 19:43, 2 users, load average: 23.13, 23.30, 23.62
(a lot of play with earphone - but it does not start and it won't let me connect to sqlplus /nolog)
Killed all the processors of Oracle, still unable to connect to sqlplus
Tasks: running, 97 98 1 total sleeping, 0 stopped, 0 zombie
CPU: 0.7% us, sy 0.2% 0.0% or 99.1% id, 0.0% wa, 0.0% Hi, 0.0% if
MEM: 3115248 k total, 2679604 k used, 435644 k free, 248572 k buffers
Swap: 6289436 k total, 80168 k used, 6209268 k free, 2271904 k cached
THE NEST PR NOR % CPU TIME + % MEM VIRT RES SHR S COMMAND USE
1 root 16 0 0:58.87 0 0.0 2468 548 468 init S
2 root RT 0 0 3:44.19 0 0.0 0 0 S migration/0
3 34 19 0:12.75 root 0 0.0 0 0 S 0 ksoftirqd/0
4 root RT 0 0 4:24.88 0 0.0 0 0 S migration/1
5 34 19 0:11.23 roots 0 0.0 0 0 0 S ksoftirqd/1
6 root RT 0 0 4:28.42 0 0.0 0 0 S migration/2
7 34 19 0:12.55 roots 0 0.0 0 0 0 S ksoftirqd/2
8 root RT 0 0 3:59.45 0 0.0 0 0 S migration/3
9 root of 34 19 0:13.29 0 0.0 0 0 0 S ksoftirqd/3
10 root-5 10 0 0:00.84 0 0.0 0 0 events/0 S
11 root-5 10 0 0:00.43 0 0.0 0 0 events/1 S
12 root-5 10 0 0:01.82 0 0.0 0 0 events/2 S
13 root-5 10 0 0:00.80 0 0.0 0 0 events/3 S
14 root 6-10 3:08.63 0 0.0 0 0 0 S khelper
15 root-5 10 0 0:00.00 0 0.0 0 S 0 kblockd/0
root-5 16 10 0 0:00.00 0 0.0 0 0 S kblockd/1
17 root-5 10 0 0:00.01 0 0.0 0 0 S kblockd/2
18 root-5 10 0 0:00.00 0 0.0 0 0 S kblockd/3
19 root 15 0 0 0:00.00 0 0.0 0 0 S khubd
the square root of 69 15 0 0 3:20.26 0 0.0 0 0 S pdflush
root 70 16 0 0 2:25.34 0 0.0 0 0 S pdflush
root of 71 16 0 0 53:43.69 0 0.0 0 0 S kswapd0
root of 72-6 10 0 0:00.00 0 0.0 0 0 aio/0 S
root 73 6 - 10 0:00.00 0 0.0 0 0 0 S aio/1
root 74 6 - 10 0:00.00 0 0.0 0 0 0 aio/2 S
75 root 6-10 0:00.00 0 0.0 0 0 0 aio/3 S
219 root 25 0 0 0:00.00 0 0.0 0 0 S kseriod
462 root 25 0 0 0:00.00 0 0.0 0 0 S scsi_eh_0
463 root 15 0 0 0:00.00 0 0.0 0 0 S ahc_dv_0
465 root 19 0 0 0:00.00 0 0.0 0 0 S scsi_eh_1
466 root 15 0 0 0:00.00 0 0.0 0 0 S ahc_dv_1
502 root 15 0 0 5:02.83 0 0.0 0 0 S kjournald
1064 root 6-10 0:00.00 0 0.0 0 0 0 S kauditd
1683 root 6-10 0:00.05 0 0,0 3336 448 368 S udevd
1795 root 25 0 0 0:00.00 0 0.0 0 0 S phpd_event
root of 1957 15 0 0 0:00.01 0 0.0 0 0 S kjournald
root of 1958 15 0 0 0:00.01 0 0.0 0 0 S kjournald
root of 1959 15 0 0 0:01.44 0 0.0 0 0 S kjournald
1960 root 15 0 0 0:12.13 0 0.0 0 0 S kjournald
1961 root 15 0 0 0:04.08 0 0.0 0 0 S kjournald
1962 root 15 0 0 0:03.89 0 0.0 0 0 S kjournald
the square root of 15 1963 0 0 0:04.93 0 0.0 0 0 S kjournald
root 1964 15 0 0 39:23.43 0 0.0 0 0 S kjournald
Edited by: sunpat November 23, 2010 11:52http://www.lmgtfy.com/?q=Oracle+Linux+uptime+bug
-
Internet Explorer message: "unable to connect via the parameter to wide band".
When I try to connect to Internet Explorer, I get a message saying unable to connect via the parameter to broadband. We have AT & T Wi - Fi that I seem to be the only one of 4 people in our House, that has a connection problem. We all have different types of computers, some run Windows 7 and others are Vista. Don't no if this material. I preformed a few tests without results of troubleshooting. Help, please
[Original title: programs network networking Internet site Internet website URL website network]
Hello
· What is the exact error message you get when connecting to internet?
· Which is the browser you use to access the internet?
· You are able to use other internet applications such as messenger etc?
I suggest you follow the steps below:
Method 1:
Follow the steps in the link below to connect to the internet in the link below:
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
Method 2:
Follow the steps outlined in the article below if you can not connect to internet:
http://support.Microsoft.com/kb/956196
Method 3:
If the steps above do not follow the steps in the link below for network connection problems in windows:
http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows
I hope this helps.
Maybe you are looking for
-
Cannot download AMD driver for my L850 - Satellite Pro 1NQ
Hello world I have a problem downloading the graphics driver from amd. I tried several times on different days, computers and networks, but the download stops every time about 120-170 MB. I hope someone can help me. So far, thanks
-
Hello Forum, My previous post is left unanswered , and so I stumbled through on my own. My goal was to perform time correlated anticipated spectroscopy. I use a 6321 X series DAQ card, a Perkin Elmer SPCM and a pulsed laser. I'm exciting a sample wit
-
Perform a sequence using the new method of execution
Hi ppl, I use the Engine.NewExecution method in LabVIEW to perform a sequence using sequential process model. I have been successful in this attempt. Now when I tried to pass arguments to the sequence with this method I could not do From the help fil
-
Restart to restore the recovery disk
I copied information from hard drive to a flash drive. When I try to boot the computer to run the recovery disk, the computer will get not to a point to the "run". He is stuck in a cycle of trying to restart. Tried rebooting normally, finally a go
-
When I try to re install Win 7 disk, it goes about 70% then stops with the message "required Driver is not found. Help